diff options
Diffstat (limited to 'hw/dma/pl080.c')
| -rw-r--r-- | hw/dma/pl080.c | 421 |
1 files changed, 421 insertions, 0 deletions
diff --git a/hw/dma/pl080.c b/hw/dma/pl080.c new file mode 100644 index 0000000000..00b66b45b0 --- /dev/null +++ b/hw/dma/pl080.c @@ -0,0 +1,421 @@ +/* + * Arm PrimeCell PL080/PL081 DMA controller + * + * Copyright (c) 2006 CodeSourcery. + * Written by Paul Brook + * + * This code is licensed under the GPL. + */ + +#include "hw/sysbus.h" + +#define PL080_MAX_CHANNELS 8 +#define PL080_CONF_E 0x1 +#define PL080_CONF_M1 0x2 +#define PL080_CONF_M2 0x4 + +#define PL080_CCONF_H 0x40000 +#define PL080_CCONF_A 0x20000 +#define PL080_CCONF_L 0x10000 +#define PL080_CCONF_ITC 0x08000 +#define PL080_CCONF_IE 0x04000 +#define PL080_CCONF_E 0x00001 + +#define PL080_CCTRL_I 0x80000000 +#define PL080_CCTRL_DI 0x08000000 +#define PL080_CCTRL_SI 0x04000000 +#define PL080_CCTRL_D 0x02000000 +#define PL080_CCTRL_S 0x01000000 + +typedef struct { + uint32_t src; + uint32_t dest; + uint32_t lli; + uint32_t ctrl; + uint32_t conf; +} pl080_channel; + +typedef struct { + SysBusDevice busdev; + MemoryRegion iomem; + uint8_t tc_int; + uint8_t tc_mask; + uint8_t err_int; + uint8_t err_mask; + uint32_t conf; + uint32_t sync; + uint32_t req_single; + uint32_t req_burst; + pl080_channel chan[PL080_MAX_CHANNELS]; + int nchannels; + /* Flag to avoid recursive DMA invocations. */ + int running; + qemu_irq irq; +} pl080_state; + +static const VMStateDescription vmstate_pl080_channel = { + .name = "pl080_channel", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(src, pl080_channel), + VMSTATE_UINT32(dest, pl080_channel), + VMSTATE_UINT32(lli, pl080_channel), + VMSTATE_UINT32(ctrl, pl080_channel), + VMSTATE_UINT32(conf, pl080_channel), + VMSTATE_END_OF_LIST() + } +}; + +static const VMStateDescription vmstate_pl080 = { + .name = "pl080", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8(tc_int, pl080_state), + VMSTATE_UINT8(tc_mask, pl080_state), + VMSTATE_UINT8(err_int, pl080_state), + VMSTATE_UINT8(err_mask, pl080_state), + VMSTATE_UINT32(conf, pl080_state), + VMSTATE_UINT32(sync, pl080_state), + VMSTATE_UINT32(req_single, pl080_state), + VMSTATE_UINT32(req_burst, pl080_state), + VMSTATE_UINT8(tc_int, pl080_state), + VMSTATE_UINT8(tc_int, pl080_state), + VMSTATE_UINT8(tc_int, pl080_state), + VMSTATE_STRUCT_ARRAY(chan, pl080_state, PL080_MAX_CHANNELS, + 1, vmstate_pl080_channel, pl080_channel), + VMSTATE_INT32(running, pl080_state), + VMSTATE_END_OF_LIST() + } +}; + +static const unsigned char pl080_id[] = +{ 0x80, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 }; + +static const unsigned char pl081_id[] = +{ 0x81, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 }; + +static void pl080_update(pl080_state *s) +{ + if ((s->tc_int & s->tc_mask) + || (s->err_int & s->err_mask)) + qemu_irq_raise(s->irq); + else + qemu_irq_lower(s->irq); +} + +static void pl080_run(pl080_state *s) +{ + int c; + int flow; + pl080_channel *ch; + int swidth; + int dwidth; + int xsize; + int n; + int src_id; + int dest_id; + int size; + uint8_t buff[4]; + uint32_t req; + + s->tc_mask = 0; + for (c = 0; c < s->nchannels; c++) { + if (s->chan[c].conf & PL080_CCONF_ITC) + s->tc_mask |= 1 << c; + if (s->chan[c].conf & PL080_CCONF_IE) + s->err_mask |= 1 << c; + } + + if ((s->conf & PL080_CONF_E) == 0) + return; + +hw_error("DMA active\n"); + /* If we are already in the middle of a DMA operation then indicate that + there may be new DMA requests and return immediately. */ + if (s->running) { + s->running++; + return; + } + s->running = 1; + while (s->running) { + for (c = 0; c < s->nchannels; c++) { + ch = &s->chan[c]; +again: + /* Test if thiws channel has any pending DMA requests. */ + if ((ch->conf & (PL080_CCONF_H | PL080_CCONF_E)) + != PL080_CCONF_E) + continue; + flow = (ch->conf >> 11) & 7; + if (flow >= 4) { + hw_error( + "pl080_run: Peripheral flow control not implemented\n"); + } + src_id = (ch->conf >> 1) & 0x1f; + dest_id = (ch->conf >> 6) & 0x1f; + size = ch->ctrl & 0xfff; + req = s->req_single | s->req_burst; + switch (flow) { + case 0: + break; + case 1: + if ((req & (1u << dest_id)) == 0) + size = 0; + break; + case 2: + if ((req & (1u << src_id)) == 0) + size = 0; + break; + case 3: + if ((req & (1u << src_id)) == 0 + || (req & (1u << dest_id)) == 0) + size = 0; + break; + } + if (!size) + continue; + + /* Transfer one element. */ + /* ??? Should transfer multiple elements for a burst request. */ + /* ??? Unclear what the proper behavior is when source and + destination widths are different. */ + swidth = 1 << ((ch->ctrl >> 18) & 7); + dwidth = 1 << ((ch->ctrl >> 21) & 7); + for (n = 0; n < dwidth; n+= swidth) { + cpu_physical_memory_read(ch->src, buff + n, swidth); + if (ch->ctrl & PL080_CCTRL_SI) + ch->src += swidth; + } + xsize = (dwidth < swidth) ? swidth : dwidth; + /* ??? This may pad the value incorrectly for dwidth < 32. */ + for (n = 0; n < xsize; n += dwidth) { + cpu_physical_memory_write(ch->dest + n, buff + n, dwidth); + if (ch->ctrl & PL080_CCTRL_DI) + ch->dest += swidth; + } + + size--; + ch->ctrl = (ch->ctrl & 0xfffff000) | size; + if (size == 0) { + /* Transfer complete. */ + if (ch->lli) { + ch->src = ldl_le_phys(ch->lli); + ch->dest = ldl_le_phys(ch->lli + 4); + ch->ctrl = ldl_le_phys(ch->lli + 12); + ch->lli = ldl_le_phys(ch->lli + 8); + } else { + ch->conf &= ~PL080_CCONF_E; + } + if (ch->ctrl & PL080_CCTRL_I) { + s->tc_int |= 1 << c; + } + } + goto again; + } + if (--s->running) + s->running = 1; + } +} + +static uint64_t pl080_read(void *opaque, hwaddr offset, + unsigned size) +{ + pl080_state *s = (pl080_state *)opaque; + uint32_t i; + uint32_t mask; + + if (offset >= 0xfe0 && offset < 0x1000) { + if (s->nchannels == 8) { + return pl080_id[(offset - 0xfe0) >> 2]; + } else { + return pl081_id[(offset - 0xfe0) >> 2]; + } + } + if (offset >= 0x100 && offset < 0x200) { + i = (offset & 0xe0) >> 5; + if (i >= s->nchannels) + goto bad_offset; + switch (offset >> 2) { + case 0: /* SrcAddr */ + return s->chan[i].src; + case 1: /* DestAddr */ + return s->chan[i].dest; + case 2: /* LLI */ + return s->chan[i].lli; + case 3: /* Control */ + return s->chan[i].ctrl; + case 4: /* Configuration */ + return s->chan[i].conf; + default: + goto bad_offset; + } + } + switch (offset >> 2) { + case 0: /* IntStatus */ + return (s->tc_int & s->tc_mask) | (s->err_int & s->err_mask); + case 1: /* IntTCStatus */ + return (s->tc_int & s->tc_mask); + case 3: /* IntErrorStatus */ + return (s->err_int & s->err_mask); + case 5: /* RawIntTCStatus */ + return s->tc_int; + case 6: /* RawIntErrorStatus */ + return s->err_int; + case 7: /* EnbldChns */ + mask = 0; + for (i = 0; i < s->nchannels; i++) { + if (s->chan[i].conf & PL080_CCONF_E) + mask |= 1 << i; + } + return mask; + case 8: /* SoftBReq */ + case 9: /* SoftSReq */ + case 10: /* SoftLBReq */ + case 11: /* SoftLSReq */ + /* ??? Implement these. */ + return 0; + case 12: /* Configuration */ + return s->conf; + case 13: /* Sync */ + return s->sync; + default: + bad_offset: + qemu_log_mask(LOG_GUEST_ERROR, + "pl080_read: Bad offset %x\n", (int)offset); + return 0; + } +} + +static void pl080_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + pl080_state *s = (pl080_state *)opaque; + int i; + + if (offset >= 0x100 && offset < 0x200) { + i = (offset & 0xe0) >> 5; + if (i >= s->nchannels) + goto bad_offset; + switch (offset >> 2) { + case 0: /* SrcAddr */ + s->chan[i].src = value; + break; + case 1: /* DestAddr */ + s->chan[i].dest = value; + break; + case 2: /* LLI */ + s->chan[i].lli = value; + break; + case 3: /* Control */ + s->chan[i].ctrl = value; + break; + case 4: /* Configuration */ + s->chan[i].conf = value; + pl080_run(s); + break; + } + } + switch (offset >> 2) { + case 2: /* IntTCClear */ + s->tc_int &= ~value; + break; + case 4: /* IntErrorClear */ + s->err_int &= ~value; + break; + case 8: /* SoftBReq */ + case 9: /* SoftSReq */ + case 10: /* SoftLBReq */ + case 11: /* SoftLSReq */ + /* ??? Implement these. */ + qemu_log_mask(LOG_UNIMP, "pl080_write: Soft DMA not implemented\n"); + break; + case 12: /* Configuration */ + s->conf = value; + if (s->conf & (PL080_CONF_M1 | PL080_CONF_M1)) { + qemu_log_mask(LOG_UNIMP, + "pl080_write: Big-endian DMA not implemented\n"); + } + pl080_run(s); + break; + case 13: /* Sync */ + s->sync = value; + break; + default: + bad_offset: + qemu_log_mask(LOG_GUEST_ERROR, + "pl080_write: Bad offset %x\n", (int)offset); + } + pl080_update(s); +} + +static const MemoryRegionOps pl080_ops = { + .read = pl080_read, + .write = pl080_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static int pl08x_init(SysBusDevice *dev, int nchannels) +{ + pl080_state *s = FROM_SYSBUS(pl080_state, dev); + + memory_region_init_io(&s->iomem, &pl080_ops, s, "pl080", 0x1000); + sysbus_init_mmio(dev, &s->iomem); + sysbus_init_irq(dev, &s->irq); + s->nchannels = nchannels; + return 0; +} + +static int pl080_init(SysBusDevice *dev) +{ + return pl08x_init(dev, 8); +} + +static int pl081_init(SysBusDevice *dev) +{ + return pl08x_init(dev, 2); +} + +static void pl080_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); + + k->init = pl080_init; + dc->no_user = 1; + dc->vmsd = &vmstate_pl080; +} + +static const TypeInfo pl080_info = { + .name = "pl080", + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(pl080_state), + .class_init = pl080_class_init, +}; + +static void pl081_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); + + k->init = pl081_init; + dc->no_user = 1; + dc->vmsd = &vmstate_pl080; +} + +static const TypeInfo pl081_info = { + .name = "pl081", + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(pl080_state), + .class_init = pl081_class_init, +}; + +/* The PL080 and PL081 are the same except for the number of channels + they implement (8 and 2 respectively). */ +static void pl080_register_types(void) +{ + type_register_static(&pl080_info); + type_register_static(&pl081_info); +} + +type_init(pl080_register_types) |