aboutsummaryrefslogtreecommitdiff
path: root/hw/display/ssd0303.c
diff options
context:
space:
mode:
Diffstat (limited to 'hw/display/ssd0303.c')
-rw-r--r--hw/display/ssd0303.c322
1 files changed, 322 insertions, 0 deletions
diff --git a/hw/display/ssd0303.c b/hw/display/ssd0303.c
new file mode 100644
index 0000000000..183a87835c
--- /dev/null
+++ b/hw/display/ssd0303.c
@@ -0,0 +1,322 @@
+/*
+ * SSD0303 OLED controller with OSRAM Pictiva 96x16 display.
+ *
+ * Copyright (c) 2006-2007 CodeSourcery.
+ * Written by Paul Brook
+ *
+ * This code is licensed under the GPL.
+ */
+
+/* The controller can support a variety of different displays, but we only
+ implement one. Most of the commends relating to brightness and geometry
+ setup are ignored. */
+#include "hw/i2c/i2c.h"
+#include "ui/console.h"
+
+//#define DEBUG_SSD0303 1
+
+#ifdef DEBUG_SSD0303
+#define DPRINTF(fmt, ...) \
+do { printf("ssd0303: " fmt , ## __VA_ARGS__); } while (0)
+#define BADF(fmt, ...) \
+do { fprintf(stderr, "ssd0303: error: " fmt , ## __VA_ARGS__); exit(1);} while (0)
+#else
+#define DPRINTF(fmt, ...) do {} while(0)
+#define BADF(fmt, ...) \
+do { fprintf(stderr, "ssd0303: error: " fmt , ## __VA_ARGS__);} while (0)
+#endif
+
+/* Scaling factor for pixels. */
+#define MAGNIFY 4
+
+enum ssd0303_mode
+{
+ SSD0303_IDLE,
+ SSD0303_DATA,
+ SSD0303_CMD
+};
+
+enum ssd0303_cmd {
+ SSD0303_CMD_NONE,
+ SSD0303_CMD_SKIP1
+};
+
+typedef struct {
+ I2CSlave i2c;
+ QemuConsole *con;
+ int row;
+ int col;
+ int start_line;
+ int mirror;
+ int flash;
+ int enabled;
+ int inverse;
+ int redraw;
+ enum ssd0303_mode mode;
+ enum ssd0303_cmd cmd_state;
+ uint8_t framebuffer[132*8];
+} ssd0303_state;
+
+static int ssd0303_recv(I2CSlave *i2c)
+{
+ BADF("Reads not implemented\n");
+ return -1;
+}
+
+static int ssd0303_send(I2CSlave *i2c, uint8_t data)
+{
+ ssd0303_state *s = (ssd0303_state *)i2c;
+ enum ssd0303_cmd old_cmd_state;
+ switch (s->mode) {
+ case SSD0303_IDLE:
+ DPRINTF("byte 0x%02x\n", data);
+ if (data == 0x80)
+ s->mode = SSD0303_CMD;
+ else if (data == 0x40)
+ s->mode = SSD0303_DATA;
+ else
+ BADF("Unexpected byte 0x%x\n", data);
+ break;
+ case SSD0303_DATA:
+ DPRINTF("data 0x%02x\n", data);
+ if (s->col < 132) {
+ s->framebuffer[s->col + s->row * 132] = data;
+ s->col++;
+ s->redraw = 1;
+ }
+ break;
+ case SSD0303_CMD:
+ old_cmd_state = s->cmd_state;
+ s->cmd_state = SSD0303_CMD_NONE;
+ switch (old_cmd_state) {
+ case SSD0303_CMD_NONE:
+ DPRINTF("cmd 0x%02x\n", data);
+ s->mode = SSD0303_IDLE;
+ switch (data) {
+ case 0x00 ... 0x0f: /* Set lower column address. */
+ s->col = (s->col & 0xf0) | (data & 0xf);
+ break;
+ case 0x10 ... 0x20: /* Set higher column address. */
+ s->col = (s->col & 0x0f) | ((data & 0xf) << 4);
+ break;
+ case 0x40 ... 0x7f: /* Set start line. */
+ s->start_line = 0;
+ break;
+ case 0x81: /* Set contrast (Ignored). */
+ s->cmd_state = SSD0303_CMD_SKIP1;
+ break;
+ case 0xa0: /* Mirror off. */
+ s->mirror = 0;
+ break;
+ case 0xa1: /* Mirror off. */
+ s->mirror = 1;
+ break;
+ case 0xa4: /* Entire display off. */
+ s->flash = 0;
+ break;
+ case 0xa5: /* Entire display on. */
+ s->flash = 1;
+ break;
+ case 0xa6: /* Inverse off. */
+ s->inverse = 0;
+ break;
+ case 0xa7: /* Inverse on. */
+ s->inverse = 1;
+ break;
+ case 0xa8: /* Set multiplied ratio (Ignored). */
+ s->cmd_state = SSD0303_CMD_SKIP1;
+ break;
+ case 0xad: /* DC-DC power control. */
+ s->cmd_state = SSD0303_CMD_SKIP1;
+ break;
+ case 0xae: /* Display off. */
+ s->enabled = 0;
+ break;
+ case 0xaf: /* Display on. */
+ s->enabled = 1;
+ break;
+ case 0xb0 ... 0xbf: /* Set Page address. */
+ s->row = data & 7;
+ break;
+ case 0xc0 ... 0xc8: /* Set COM output direction (Ignored). */
+ break;
+ case 0xd3: /* Set display offset (Ignored). */
+ s->cmd_state = SSD0303_CMD_SKIP1;
+ break;
+ case 0xd5: /* Set display clock (Ignored). */
+ s->cmd_state = SSD0303_CMD_SKIP1;
+ break;
+ case 0xd8: /* Set color and power mode (Ignored). */
+ s->cmd_state = SSD0303_CMD_SKIP1;
+ break;
+ case 0xd9: /* Set pre-charge period (Ignored). */
+ s->cmd_state = SSD0303_CMD_SKIP1;
+ break;
+ case 0xda: /* Set COM pin configuration (Ignored). */
+ s->cmd_state = SSD0303_CMD_SKIP1;
+ break;
+ case 0xdb: /* Set VCOM dselect level (Ignored). */
+ s->cmd_state = SSD0303_CMD_SKIP1;
+ break;
+ case 0xe3: /* no-op. */
+ break;
+ default:
+ BADF("Unknown command: 0x%x\n", data);
+ }
+ break;
+ case SSD0303_CMD_SKIP1:
+ DPRINTF("skip 0x%02x\n", data);
+ break;
+ }
+ break;
+ }
+ return 0;
+}
+
+static void ssd0303_event(I2CSlave *i2c, enum i2c_event event)
+{
+ ssd0303_state *s = (ssd0303_state *)i2c;
+ switch (event) {
+ case I2C_FINISH:
+ s->mode = SSD0303_IDLE;
+ break;
+ case I2C_START_RECV:
+ case I2C_START_SEND:
+ case I2C_NACK:
+ /* Nothing to do. */
+ break;
+ }
+}
+
+static void ssd0303_update_display(void *opaque)
+{
+ ssd0303_state *s = (ssd0303_state *)opaque;
+ DisplaySurface *surface = qemu_console_surface(s->con);
+ uint8_t *dest;
+ uint8_t *src;
+ int x;
+ int y;
+ int line;
+ char *colors[2];
+ char colortab[MAGNIFY * 8];
+ int dest_width;
+ uint8_t mask;
+
+ if (!s->redraw)
+ return;
+
+ switch (surface_bits_per_pixel(surface)) {
+ case 0:
+ return;
+ case 15:
+ dest_width = 2;
+ break;
+ case 16:
+ dest_width = 2;
+ break;
+ case 24:
+ dest_width = 3;
+ break;
+ case 32:
+ dest_width = 4;
+ break;
+ default:
+ BADF("Bad color depth\n");
+ return;
+ }
+ dest_width *= MAGNIFY;
+ memset(colortab, 0xff, dest_width);
+ memset(colortab + dest_width, 0, dest_width);
+ if (s->flash) {
+ colors[0] = colortab;
+ colors[1] = colortab;
+ } else if (s->inverse) {
+ colors[0] = colortab;
+ colors[1] = colortab + dest_width;
+ } else {
+ colors[0] = colortab + dest_width;
+ colors[1] = colortab;
+ }
+ dest = surface_data(surface);
+ for (y = 0; y < 16; y++) {
+ line = (y + s->start_line) & 63;
+ src = s->framebuffer + 132 * (line >> 3) + 36;
+ mask = 1 << (line & 7);
+ for (x = 0; x < 96; x++) {
+ memcpy(dest, colors[(*src & mask) != 0], dest_width);
+ dest += dest_width;
+ src++;
+ }
+ for (x = 1; x < MAGNIFY; x++) {
+ memcpy(dest, dest - dest_width * 96, dest_width * 96);
+ dest += dest_width * 96;
+ }
+ }
+ s->redraw = 0;
+ dpy_gfx_update(s->con, 0, 0, 96 * MAGNIFY, 16 * MAGNIFY);
+}
+
+static void ssd0303_invalidate_display(void * opaque)
+{
+ ssd0303_state *s = (ssd0303_state *)opaque;
+ s->redraw = 1;
+}
+
+static const VMStateDescription vmstate_ssd0303 = {
+ .name = "ssd0303_oled",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField []) {
+ VMSTATE_INT32(row, ssd0303_state),
+ VMSTATE_INT32(col, ssd0303_state),
+ VMSTATE_INT32(start_line, ssd0303_state),
+ VMSTATE_INT32(mirror, ssd0303_state),
+ VMSTATE_INT32(flash, ssd0303_state),
+ VMSTATE_INT32(enabled, ssd0303_state),
+ VMSTATE_INT32(inverse, ssd0303_state),
+ VMSTATE_INT32(redraw, ssd0303_state),
+ VMSTATE_UINT32(mode, ssd0303_state),
+ VMSTATE_UINT32(cmd_state, ssd0303_state),
+ VMSTATE_BUFFER(framebuffer, ssd0303_state),
+ VMSTATE_I2C_SLAVE(i2c, ssd0303_state),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static int ssd0303_init(I2CSlave *i2c)
+{
+ ssd0303_state *s = FROM_I2C_SLAVE(ssd0303_state, i2c);
+
+ s->con = graphic_console_init(ssd0303_update_display,
+ ssd0303_invalidate_display,
+ NULL, NULL, s);
+ qemu_console_resize(s->con, 96 * MAGNIFY, 16 * MAGNIFY);
+ return 0;
+}
+
+static void ssd0303_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
+
+ k->init = ssd0303_init;
+ k->event = ssd0303_event;
+ k->recv = ssd0303_recv;
+ k->send = ssd0303_send;
+ dc->vmsd = &vmstate_ssd0303;
+}
+
+static const TypeInfo ssd0303_info = {
+ .name = "ssd0303",
+ .parent = TYPE_I2C_SLAVE,
+ .instance_size = sizeof(ssd0303_state),
+ .class_init = ssd0303_class_init,
+};
+
+static void ssd0303_register_types(void)
+{
+ type_register_static(&ssd0303_info);
+}
+
+type_init(ssd0303_register_types)
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 02:29:31 +0000