diff options
Diffstat (limited to 'hw/audio/intel-hda-defs.h')
| -rw-r--r-- | hw/audio/intel-hda-defs.h | 717 |
1 files changed, 717 insertions, 0 deletions
diff --git a/hw/audio/intel-hda-defs.h b/hw/audio/intel-hda-defs.h new file mode 100644 index 0000000000..2e37e5b874 --- /dev/null +++ b/hw/audio/intel-hda-defs.h @@ -0,0 +1,717 @@ +#ifndef HW_INTEL_HDA_DEFS_H +#define HW_INTEL_HDA_DEFS_H + +/* qemu */ +#define HDA_BUFFER_SIZE 256 + +/* --------------------------------------------------------------------- */ +/* from linux/sound/pci/hda/hda_intel.c */ + +/* + * registers + */ +#define ICH6_REG_GCAP 0x00 +#define ICH6_GCAP_64OK (1 << 0) /* 64bit address support */ +#define ICH6_GCAP_NSDO (3 << 1) /* # of serial data out signals */ +#define ICH6_GCAP_BSS (31 << 3) /* # of bidirectional streams */ +#define ICH6_GCAP_ISS (15 << 8) /* # of input streams */ +#define ICH6_GCAP_OSS (15 << 12) /* # of output streams */ +#define ICH6_REG_VMIN 0x02 +#define ICH6_REG_VMAJ 0x03 +#define ICH6_REG_OUTPAY 0x04 +#define ICH6_REG_INPAY 0x06 +#define ICH6_REG_GCTL 0x08 +#define ICH6_GCTL_RESET (1 << 0) /* controller reset */ +#define ICH6_GCTL_FCNTRL (1 << 1) /* flush control */ +#define ICH6_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ +#define ICH6_REG_WAKEEN 0x0c +#define ICH6_REG_STATESTS 0x0e +#define ICH6_REG_GSTS 0x10 +#define ICH6_GSTS_FSTS (1 << 1) /* flush status */ +#define ICH6_REG_INTCTL 0x20 +#define ICH6_REG_INTSTS 0x24 +#define ICH6_REG_WALLCLK 0x30 /* 24Mhz source */ +#define ICH6_REG_SYNC 0x34 +#define ICH6_REG_CORBLBASE 0x40 +#define ICH6_REG_CORBUBASE 0x44 +#define ICH6_REG_CORBWP 0x48 +#define ICH6_REG_CORBRP 0x4a +#define ICH6_CORBRP_RST (1 << 15) /* read pointer reset */ +#define ICH6_REG_CORBCTL 0x4c +#define ICH6_CORBCTL_RUN (1 << 1) /* enable DMA */ +#define ICH6_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ +#define ICH6_REG_CORBSTS 0x4d +#define ICH6_CORBSTS_CMEI (1 << 0) /* memory error indication */ +#define ICH6_REG_CORBSIZE 0x4e + +#define ICH6_REG_RIRBLBASE 0x50 +#define ICH6_REG_RIRBUBASE 0x54 +#define ICH6_REG_RIRBWP 0x58 +#define ICH6_RIRBWP_RST (1 << 15) /* write pointer reset */ +#define ICH6_REG_RINTCNT 0x5a +#define ICH6_REG_RIRBCTL 0x5c +#define ICH6_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ +#define ICH6_RBCTL_DMA_EN (1 << 1) /* enable DMA */ +#define ICH6_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ +#define ICH6_REG_RIRBSTS 0x5d +#define ICH6_RBSTS_IRQ (1 << 0) /* response irq */ +#define ICH6_RBSTS_OVERRUN (1 << 2) /* overrun irq */ +#define ICH6_REG_RIRBSIZE 0x5e + +#define ICH6_REG_IC 0x60 +#define ICH6_REG_IR 0x64 +#define ICH6_REG_IRS 0x68 +#define ICH6_IRS_VALID (1<<1) +#define ICH6_IRS_BUSY (1<<0) + +#define ICH6_REG_DPLBASE 0x70 +#define ICH6_REG_DPUBASE 0x74 +#define ICH6_DPLBASE_ENABLE 0x1 /* Enable position buffer */ + +/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ +enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; + +/* stream register offsets from stream base */ +#define ICH6_REG_SD_CTL 0x00 +#define ICH6_REG_SD_STS 0x03 +#define ICH6_REG_SD_LPIB 0x04 +#define ICH6_REG_SD_CBL 0x08 +#define ICH6_REG_SD_LVI 0x0c +#define ICH6_REG_SD_FIFOW 0x0e +#define ICH6_REG_SD_FIFOSIZE 0x10 +#define ICH6_REG_SD_FORMAT 0x12 +#define ICH6_REG_SD_BDLPL 0x18 +#define ICH6_REG_SD_BDLPU 0x1c + +/* PCI space */ +#define ICH6_PCIREG_TCSEL 0x44 + +/* + * other constants + */ + +/* max number of SDs */ +/* ICH, ATI and VIA have 4 playback and 4 capture */ +#define ICH6_NUM_CAPTURE 4 +#define ICH6_NUM_PLAYBACK 4 + +/* ULI has 6 playback and 5 capture */ +#define ULI_NUM_CAPTURE 5 +#define ULI_NUM_PLAYBACK 6 + +/* ATI HDMI has 1 playback and 0 capture */ +#define ATIHDMI_NUM_CAPTURE 0 +#define ATIHDMI_NUM_PLAYBACK 1 + +/* TERA has 4 playback and 3 capture */ +#define TERA_NUM_CAPTURE 3 +#define TERA_NUM_PLAYBACK 4 + +/* this number is statically defined for simplicity */ +#define MAX_AZX_DEV 16 + +/* max number of fragments - we may use more if allocating more pages for BDL */ +#define BDL_SIZE 4096 +#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16) +#define AZX_MAX_FRAG 32 +/* max buffer size - no h/w limit, you can increase as you like */ +#define AZX_MAX_BUF_SIZE (1024*1024*1024) + +/* RIRB int mask: overrun[2], response[0] */ +#define RIRB_INT_RESPONSE 0x01 +#define RIRB_INT_OVERRUN 0x04 +#define RIRB_INT_MASK 0x05 + +/* STATESTS int mask: S3,SD2,SD1,SD0 */ +#define AZX_MAX_CODECS 8 +#define AZX_DEFAULT_CODECS 4 +#define STATESTS_INT_MASK ((1 << AZX_MAX_CODECS) - 1) + +/* SD_CTL bits */ +#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */ +#define SD_CTL_DMA_START 0x02 /* stream DMA start bit */ +#define SD_CTL_STRIPE (3 << 16) /* stripe control */ +#define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */ +#define SD_CTL_DIR (1 << 19) /* bi-directional stream */ +#define SD_CTL_STREAM_TAG_MASK (0xf << 20) +#define SD_CTL_STREAM_TAG_SHIFT 20 + +/* SD_CTL and SD_STS */ +#define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */ +#define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */ +#define SD_INT_COMPLETE 0x04 /* completion interrupt */ +#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\ + SD_INT_COMPLETE) + +/* SD_STS */ +#define SD_STS_FIFO_READY 0x20 /* FIFO ready */ + +/* INTCTL and INTSTS */ +#define ICH6_INT_ALL_STREAM 0xff /* all stream interrupts */ +#define ICH6_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ +#define ICH6_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ + +/* below are so far hardcoded - should read registers in future */ +#define ICH6_MAX_CORB_ENTRIES 256 +#define ICH6_MAX_RIRB_ENTRIES 256 + +/* position fix mode */ +enum { + POS_FIX_AUTO, + POS_FIX_LPIB, + POS_FIX_POSBUF, +}; + +/* Defines for ATI HD Audio support in SB450 south bridge */ +#define ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR 0x42 +#define ATI_SB450_HDAUDIO_ENABLE_SNOOP 0x02 + +/* Defines for Nvidia HDA support */ +#define NVIDIA_HDA_TRANSREG_ADDR 0x4e +#define NVIDIA_HDA_ENABLE_COHBITS 0x0f +#define NVIDIA_HDA_ISTRM_COH 0x4d +#define NVIDIA_HDA_OSTRM_COH 0x4c +#define NVIDIA_HDA_ENABLE_COHBIT 0x01 + +/* Defines for Intel SCH HDA snoop control */ +#define INTEL_SCH_HDA_DEVC 0x78 +#define INTEL_SCH_HDA_DEVC_NOSNOOP (0x1<<11) + +/* Define IN stream 0 FIFO size offset in VIA controller */ +#define VIA_IN_STREAM0_FIFO_SIZE_OFFSET 0x90 +/* Define VIA HD Audio Device ID*/ +#define VIA_HDAC_DEVICE_ID 0x3288 + +/* HD Audio class code */ +#define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403 + +/* --------------------------------------------------------------------- */ +/* from linux/sound/pci/hda/hda_codec.h */ + +/* + * nodes + */ +#define AC_NODE_ROOT 0x00 + +/* + * function group types + */ +enum { + AC_GRP_AUDIO_FUNCTION = 0x01, + AC_GRP_MODEM_FUNCTION = 0x02, +}; + +/* + * widget types + */ +enum { + AC_WID_AUD_OUT, /* Audio Out */ + AC_WID_AUD_IN, /* Audio In */ + AC_WID_AUD_MIX, /* Audio Mixer */ + AC_WID_AUD_SEL, /* Audio Selector */ + AC_WID_PIN, /* Pin Complex */ + AC_WID_POWER, /* Power */ + AC_WID_VOL_KNB, /* Volume Knob */ + AC_WID_BEEP, /* Beep Generator */ + AC_WID_VENDOR = 0x0f /* Vendor specific */ +}; + +/* + * GET verbs + */ +#define AC_VERB_GET_STREAM_FORMAT 0x0a00 +#define AC_VERB_GET_AMP_GAIN_MUTE 0x0b00 +#define AC_VERB_GET_PROC_COEF 0x0c00 +#define AC_VERB_GET_COEF_INDEX 0x0d00 +#define AC_VERB_PARAMETERS 0x0f00 +#define AC_VERB_GET_CONNECT_SEL 0x0f01 +#define AC_VERB_GET_CONNECT_LIST 0x0f02 +#define AC_VERB_GET_PROC_STATE 0x0f03 +#define AC_VERB_GET_SDI_SELECT 0x0f04 +#define AC_VERB_GET_POWER_STATE 0x0f05 +#define AC_VERB_GET_CONV 0x0f06 +#define AC_VERB_GET_PIN_WIDGET_CONTROL 0x0f07 +#define AC_VERB_GET_UNSOLICITED_RESPONSE 0x0f08 +#define AC_VERB_GET_PIN_SENSE 0x0f09 +#define AC_VERB_GET_BEEP_CONTROL 0x0f0a +#define AC_VERB_GET_EAPD_BTLENABLE 0x0f0c +#define AC_VERB_GET_DIGI_CONVERT_1 0x0f0d +#define AC_VERB_GET_DIGI_CONVERT_2 0x0f0e /* unused */ +#define AC_VERB_GET_VOLUME_KNOB_CONTROL 0x0f0f +/* f10-f1a: GPIO */ +#define AC_VERB_GET_GPIO_DATA 0x0f15 +#define AC_VERB_GET_GPIO_MASK 0x0f16 +#define AC_VERB_GET_GPIO_DIRECTION 0x0f17 +#define AC_VERB_GET_GPIO_WAKE_MASK 0x0f18 +#define AC_VERB_GET_GPIO_UNSOLICITED_RSP_MASK 0x0f19 +#define AC_VERB_GET_GPIO_STICKY_MASK 0x0f1a +#define AC_VERB_GET_CONFIG_DEFAULT 0x0f1c +/* f20: AFG/MFG */ +#define AC_VERB_GET_SUBSYSTEM_ID 0x0f20 +#define AC_VERB_GET_CVT_CHAN_COUNT 0x0f2d +#define AC_VERB_GET_HDMI_DIP_SIZE 0x0f2e +#define AC_VERB_GET_HDMI_ELDD 0x0f2f +#define AC_VERB_GET_HDMI_DIP_INDEX 0x0f30 +#define AC_VERB_GET_HDMI_DIP_DATA 0x0f31 +#define AC_VERB_GET_HDMI_DIP_XMIT 0x0f32 +#define AC_VERB_GET_HDMI_CP_CTRL 0x0f33 +#define AC_VERB_GET_HDMI_CHAN_SLOT 0x0f34 + +/* + * SET verbs + */ +#define AC_VERB_SET_STREAM_FORMAT 0x200 +#define AC_VERB_SET_AMP_GAIN_MUTE 0x300 +#define AC_VERB_SET_PROC_COEF 0x400 +#define AC_VERB_SET_COEF_INDEX 0x500 +#define AC_VERB_SET_CONNECT_SEL 0x701 +#define AC_VERB_SET_PROC_STATE 0x703 +#define AC_VERB_SET_SDI_SELECT 0x704 +#define AC_VERB_SET_POWER_STATE 0x705 +#define AC_VERB_SET_CHANNEL_STREAMID 0x706 +#define AC_VERB_SET_PIN_WIDGET_CONTROL 0x707 +#define AC_VERB_SET_UNSOLICITED_ENABLE 0x708 +#define AC_VERB_SET_PIN_SENSE 0x709 +#define AC_VERB_SET_BEEP_CONTROL 0x70a +#define AC_VERB_SET_EAPD_BTLENABLE 0x70c +#define AC_VERB_SET_DIGI_CONVERT_1 0x70d +#define AC_VERB_SET_DIGI_CONVERT_2 0x70e +#define AC_VERB_SET_VOLUME_KNOB_CONTROL 0x70f +#define AC_VERB_SET_GPIO_DATA 0x715 +#define AC_VERB_SET_GPIO_MASK 0x716 +#define AC_VERB_SET_GPIO_DIRECTION 0x717 +#define AC_VERB_SET_GPIO_WAKE_MASK 0x718 +#define AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK 0x719 +#define AC_VERB_SET_GPIO_STICKY_MASK 0x71a +#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_0 0x71c +#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_1 0x71d +#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_2 0x71e +#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_3 0x71f +#define AC_VERB_SET_EAPD 0x788 +#define AC_VERB_SET_CODEC_RESET 0x7ff +#define AC_VERB_SET_CVT_CHAN_COUNT 0x72d +#define AC_VERB_SET_HDMI_DIP_INDEX 0x730 +#define AC_VERB_SET_HDMI_DIP_DATA 0x731 +#define AC_VERB_SET_HDMI_DIP_XMIT 0x732 +#define AC_VERB_SET_HDMI_CP_CTRL 0x733 +#define AC_VERB_SET_HDMI_CHAN_SLOT 0x734 + +/* + * Parameter IDs + */ +#define AC_PAR_VENDOR_ID 0x00 +#define AC_PAR_SUBSYSTEM_ID 0x01 +#define AC_PAR_REV_ID 0x02 +#define AC_PAR_NODE_COUNT 0x04 +#define AC_PAR_FUNCTION_TYPE 0x05 +#define AC_PAR_AUDIO_FG_CAP 0x08 +#define AC_PAR_AUDIO_WIDGET_CAP 0x09 +#define AC_PAR_PCM 0x0a +#define AC_PAR_STREAM 0x0b +#define AC_PAR_PIN_CAP 0x0c +#define AC_PAR_AMP_IN_CAP 0x0d +#define AC_PAR_CONNLIST_LEN 0x0e +#define AC_PAR_POWER_STATE 0x0f +#define AC_PAR_PROC_CAP 0x10 +#define AC_PAR_GPIO_CAP 0x11 +#define AC_PAR_AMP_OUT_CAP 0x12 +#define AC_PAR_VOL_KNB_CAP 0x13 +#define AC_PAR_HDMI_LPCM_CAP 0x20 + +/* + * AC_VERB_PARAMETERS results (32bit) + */ + +/* Function Group Type */ +#define AC_FGT_TYPE (0xff<<0) +#define AC_FGT_TYPE_SHIFT 0 +#define AC_FGT_UNSOL_CAP (1<<8) + +/* Audio Function Group Capabilities */ +#define AC_AFG_OUT_DELAY (0xf<<0) +#define AC_AFG_IN_DELAY (0xf<<8) +#define AC_AFG_BEEP_GEN (1<<16) + +/* Audio Widget Capabilities */ +#define AC_WCAP_STEREO (1<<0) /* stereo I/O */ +#define AC_WCAP_IN_AMP (1<<1) /* AMP-in present */ +#define AC_WCAP_OUT_AMP (1<<2) /* AMP-out present */ +#define AC_WCAP_AMP_OVRD (1<<3) /* AMP-parameter override */ +#define AC_WCAP_FORMAT_OVRD (1<<4) /* format override */ +#define AC_WCAP_STRIPE (1<<5) /* stripe */ +#define AC_WCAP_PROC_WID (1<<6) /* Proc Widget */ +#define AC_WCAP_UNSOL_CAP (1<<7) /* Unsol capable */ +#define AC_WCAP_CONN_LIST (1<<8) /* connection list */ +#define AC_WCAP_DIGITAL (1<<9) /* digital I/O */ +#define AC_WCAP_POWER (1<<10) /* power control */ +#define AC_WCAP_LR_SWAP (1<<11) /* L/R swap */ +#define AC_WCAP_CP_CAPS (1<<12) /* content protection */ +#define AC_WCAP_CHAN_CNT_EXT (7<<13) /* channel count ext */ +#define AC_WCAP_DELAY (0xf<<16) +#define AC_WCAP_DELAY_SHIFT 16 +#define AC_WCAP_TYPE (0xf<<20) +#define AC_WCAP_TYPE_SHIFT 20 + +/* supported PCM rates and bits */ +#define AC_SUPPCM_RATES (0xfff << 0) +#define AC_SUPPCM_BITS_8 (1<<16) +#define AC_SUPPCM_BITS_16 (1<<17) +#define AC_SUPPCM_BITS_20 (1<<18) +#define AC_SUPPCM_BITS_24 (1<<19) +#define AC_SUPPCM_BITS_32 (1<<20) + +/* supported PCM stream format */ +#define AC_SUPFMT_PCM (1<<0) +#define AC_SUPFMT_FLOAT32 (1<<1) +#define AC_SUPFMT_AC3 (1<<2) + +/* GP I/O count */ +#define AC_GPIO_IO_COUNT (0xff<<0) +#define AC_GPIO_O_COUNT (0xff<<8) +#define AC_GPIO_O_COUNT_SHIFT 8 +#define AC_GPIO_I_COUNT (0xff<<16) +#define AC_GPIO_I_COUNT_SHIFT 16 +#define AC_GPIO_UNSOLICITED (1<<30) +#define AC_GPIO_WAKE (1<<31) + +/* Converter stream, channel */ +#define AC_CONV_CHANNEL (0xf<<0) +#define AC_CONV_STREAM (0xf<<4) +#define AC_CONV_STREAM_SHIFT 4 + +/* Input converter SDI select */ +#define AC_SDI_SELECT (0xf<<0) + +/* stream format id */ +#define AC_FMT_CHAN_SHIFT 0 +#define AC_FMT_CHAN_MASK (0x0f << 0) +#define AC_FMT_BITS_SHIFT 4 +#define AC_FMT_BITS_MASK (7 << 4) +#define AC_FMT_BITS_8 (0 << 4) +#define AC_FMT_BITS_16 (1 << 4) +#define AC_FMT_BITS_20 (2 << 4) +#define AC_FMT_BITS_24 (3 << 4) +#define AC_FMT_BITS_32 (4 << 4) +#define AC_FMT_DIV_SHIFT 8 +#define AC_FMT_DIV_MASK (7 << 8) +#define AC_FMT_MULT_SHIFT 11 +#define AC_FMT_MULT_MASK (7 << 11) +#define AC_FMT_BASE_SHIFT 14 +#define AC_FMT_BASE_48K (0 << 14) +#define AC_FMT_BASE_44K (1 << 14) +#define AC_FMT_TYPE_SHIFT 15 +#define AC_FMT_TYPE_PCM (0 << 15) +#define AC_FMT_TYPE_NON_PCM (1 << 15) + +/* Unsolicited response control */ +#define AC_UNSOL_TAG (0x3f<<0) +#define AC_UNSOL_ENABLED (1<<7) +#define AC_USRSP_EN AC_UNSOL_ENABLED + +/* Unsolicited responses */ +#define AC_UNSOL_RES_TAG (0x3f<<26) +#define AC_UNSOL_RES_TAG_SHIFT 26 +#define AC_UNSOL_RES_SUBTAG (0x1f<<21) +#define AC_UNSOL_RES_SUBTAG_SHIFT 21 +#define AC_UNSOL_RES_ELDV (1<<1) /* ELD Data valid (for HDMI) */ +#define AC_UNSOL_RES_PD (1<<0) /* pinsense detect */ +#define AC_UNSOL_RES_CP_STATE (1<<1) /* content protection */ +#define AC_UNSOL_RES_CP_READY (1<<0) /* content protection */ + +/* Pin widget capabilies */ +#define AC_PINCAP_IMP_SENSE (1<<0) /* impedance sense capable */ +#define AC_PINCAP_TRIG_REQ (1<<1) /* trigger required */ +#define AC_PINCAP_PRES_DETECT (1<<2) /* presence detect capable */ +#define AC_PINCAP_HP_DRV (1<<3) /* headphone drive capable */ +#define AC_PINCAP_OUT (1<<4) /* output capable */ +#define AC_PINCAP_IN (1<<5) /* input capable */ +#define AC_PINCAP_BALANCE (1<<6) /* balanced I/O capable */ +/* Note: This LR_SWAP pincap is defined in the Realtek ALC883 specification, + * but is marked reserved in the Intel HDA specification. + */ +#define AC_PINCAP_LR_SWAP (1<<7) /* L/R swap */ +/* Note: The same bit as LR_SWAP is newly defined as HDMI capability + * in HD-audio specification + */ +#define AC_PINCAP_HDMI (1<<7) /* HDMI pin */ +#define AC_PINCAP_DP (1<<24) /* DisplayPort pin, can + * coexist with AC_PINCAP_HDMI + */ +#define AC_PINCAP_VREF (0x37<<8) +#define AC_PINCAP_VREF_SHIFT 8 +#define AC_PINCAP_EAPD (1<<16) /* EAPD capable */ +#define AC_PINCAP_HBR (1<<27) /* High Bit Rate */ +/* Vref status (used in pin cap) */ +#define AC_PINCAP_VREF_HIZ (1<<0) /* Hi-Z */ +#define AC_PINCAP_VREF_50 (1<<1) /* 50% */ +#define AC_PINCAP_VREF_GRD (1<<2) /* ground */ +#define AC_PINCAP_VREF_80 (1<<4) /* 80% */ +#define AC_PINCAP_VREF_100 (1<<5) /* 100% */ + +/* Amplifier capabilities */ +#define AC_AMPCAP_OFFSET (0x7f<<0) /* 0dB offset */ +#define AC_AMPCAP_OFFSET_SHIFT 0 +#define AC_AMPCAP_NUM_STEPS (0x7f<<8) /* number of steps */ +#define AC_AMPCAP_NUM_STEPS_SHIFT 8 +#define AC_AMPCAP_STEP_SIZE (0x7f<<16) /* step size 0-32dB + * in 0.25dB + */ +#define AC_AMPCAP_STEP_SIZE_SHIFT 16 +#define AC_AMPCAP_MUTE (1<<31) /* mute capable */ +#define AC_AMPCAP_MUTE_SHIFT 31 + +/* Connection list */ +#define AC_CLIST_LENGTH (0x7f<<0) +#define AC_CLIST_LONG (1<<7) + +/* Supported power status */ +#define AC_PWRST_D0SUP (1<<0) +#define AC_PWRST_D1SUP (1<<1) +#define AC_PWRST_D2SUP (1<<2) +#define AC_PWRST_D3SUP (1<<3) +#define AC_PWRST_D3COLDSUP (1<<4) +#define AC_PWRST_S3D3COLDSUP (1<<29) +#define AC_PWRST_CLKSTOP (1<<30) +#define AC_PWRST_EPSS (1U<<31) + +/* Power state values */ +#define AC_PWRST_SETTING (0xf<<0) +#define AC_PWRST_ACTUAL (0xf<<4) +#define AC_PWRST_ACTUAL_SHIFT 4 +#define AC_PWRST_D0 0x00 +#define AC_PWRST_D1 0x01 +#define AC_PWRST_D2 0x02 +#define AC_PWRST_D3 0x03 + +/* Processing capabilies */ +#define AC_PCAP_BENIGN (1<<0) +#define AC_PCAP_NUM_COEF (0xff<<8) +#define AC_PCAP_NUM_COEF_SHIFT 8 + +/* Volume knobs capabilities */ +#define AC_KNBCAP_NUM_STEPS (0x7f<<0) +#define AC_KNBCAP_DELTA (1<<7) + +/* HDMI LPCM capabilities */ +#define AC_LPCMCAP_48K_CP_CHNS (0x0f<<0) /* max channels w/ CP-on */ +#define AC_LPCMCAP_48K_NO_CHNS (0x0f<<4) /* max channels w/o CP-on */ +#define AC_LPCMCAP_48K_20BIT (1<<8) /* 20b bitrate supported */ +#define AC_LPCMCAP_48K_24BIT (1<<9) /* 24b bitrate supported */ +#define AC_LPCMCAP_96K_CP_CHNS (0x0f<<10) /* max channels w/ CP-on */ +#define AC_LPCMCAP_96K_NO_CHNS (0x0f<<14) /* max channels w/o CP-on */ +#define AC_LPCMCAP_96K_20BIT (1<<18) /* 20b bitrate supported */ +#define AC_LPCMCAP_96K_24BIT (1<<19) /* 24b bitrate supported */ +#define AC_LPCMCAP_192K_CP_CHNS (0x0f<<20) /* max channels w/ CP-on */ +#define AC_LPCMCAP_192K_NO_CHNS (0x0f<<24) /* max channels w/o CP-on */ +#define AC_LPCMCAP_192K_20BIT (1<<28) /* 20b bitrate supported */ +#define AC_LPCMCAP_192K_24BIT (1<<29) /* 24b bitrate supported */ +#define AC_LPCMCAP_44K (1<<30) /* 44.1kHz support */ +#define AC_LPCMCAP_44K_MS (1<<31) /* 44.1kHz-multiplies support */ + +/* + * Control Parameters + */ + +/* Amp gain/mute */ +#define AC_AMP_MUTE (1<<7) +#define AC_AMP_GAIN (0x7f) +#define AC_AMP_GET_INDEX (0xf<<0) + +#define AC_AMP_GET_LEFT (1<<13) +#define AC_AMP_GET_RIGHT (0<<13) +#define AC_AMP_GET_OUTPUT (1<<15) +#define AC_AMP_GET_INPUT (0<<15) + +#define AC_AMP_SET_INDEX (0xf<<8) +#define AC_AMP_SET_INDEX_SHIFT 8 +#define AC_AMP_SET_RIGHT (1<<12) +#define AC_AMP_SET_LEFT (1<<13) +#define AC_AMP_SET_INPUT (1<<14) +#define AC_AMP_SET_OUTPUT (1<<15) + +/* DIGITAL1 bits */ +#define AC_DIG1_ENABLE (1<<0) +#define AC_DIG1_V (1<<1) +#define AC_DIG1_VCFG (1<<2) +#define AC_DIG1_EMPHASIS (1<<3) +#define AC_DIG1_COPYRIGHT (1<<4) +#define AC_DIG1_NONAUDIO (1<<5) +#define AC_DIG1_PROFESSIONAL (1<<6) +#define AC_DIG1_LEVEL (1<<7) + +/* DIGITAL2 bits */ +#define AC_DIG2_CC (0x7f<<0) + +/* Pin widget control - 8bit */ +#define AC_PINCTL_EPT (0x3<<0) +#define AC_PINCTL_EPT_NATIVE 0 +#define AC_PINCTL_EPT_HBR 3 +#define AC_PINCTL_VREFEN (0x7<<0) +#define AC_PINCTL_VREF_HIZ 0 /* Hi-Z */ +#define AC_PINCTL_VREF_50 1 /* 50% */ +#define AC_PINCTL_VREF_GRD 2 /* ground */ +#define AC_PINCTL_VREF_80 4 /* 80% */ +#define AC_PINCTL_VREF_100 5 /* 100% */ +#define AC_PINCTL_IN_EN (1<<5) +#define AC_PINCTL_OUT_EN (1<<6) +#define AC_PINCTL_HP_EN (1<<7) + +/* Pin sense - 32bit */ +#define AC_PINSENSE_IMPEDANCE_MASK (0x7fffffff) +#define AC_PINSENSE_PRESENCE (1<<31) +#define AC_PINSENSE_ELDV (1<<30) /* ELD valid (HDMI) */ + +/* EAPD/BTL enable - 32bit */ +#define AC_EAPDBTL_BALANCED (1<<0) +#define AC_EAPDBTL_EAPD (1<<1) +#define AC_EAPDBTL_LR_SWAP (1<<2) + +/* HDMI ELD data */ +#define AC_ELDD_ELD_VALID (1<<31) +#define AC_ELDD_ELD_DATA 0xff + +/* HDMI DIP size */ +#define AC_DIPSIZE_ELD_BUF (1<<3) /* ELD buf size of packet size */ +#define AC_DIPSIZE_PACK_IDX (0x07<<0) /* packet index */ + +/* HDMI DIP index */ +#define AC_DIPIDX_PACK_IDX (0x07<<5) /* packet idnex */ +#define AC_DIPIDX_BYTE_IDX (0x1f<<0) /* byte index */ + +/* HDMI DIP xmit (transmit) control */ +#define AC_DIPXMIT_MASK (0x3<<6) +#define AC_DIPXMIT_DISABLE (0x0<<6) /* disable xmit */ +#define AC_DIPXMIT_ONCE (0x2<<6) /* xmit once then disable */ +#define AC_DIPXMIT_BEST (0x3<<6) /* best effort */ + +/* HDMI content protection (CP) control */ +#define AC_CPCTRL_CES (1<<9) /* current encryption state */ +#define AC_CPCTRL_READY (1<<8) /* ready bit */ +#define AC_CPCTRL_SUBTAG (0x1f<<3) /* subtag for unsol-resp */ +#define AC_CPCTRL_STATE (3<<0) /* current CP request state */ + +/* Converter channel <-> HDMI slot mapping */ +#define AC_CVTMAP_HDMI_SLOT (0xf<<0) /* HDMI slot number */ +#define AC_CVTMAP_CHAN (0xf<<4) /* converter channel number */ + +/* configuration default - 32bit */ +#define AC_DEFCFG_SEQUENCE (0xf<<0) +#define AC_DEFCFG_DEF_ASSOC (0xf<<4) +#define AC_DEFCFG_ASSOC_SHIFT 4 +#define AC_DEFCFG_MISC (0xf<<8) +#define AC_DEFCFG_MISC_SHIFT 8 +#define AC_DEFCFG_MISC_NO_PRESENCE (1<<0) +#define AC_DEFCFG_COLOR (0xf<<12) +#define AC_DEFCFG_COLOR_SHIFT 12 +#define AC_DEFCFG_CONN_TYPE (0xf<<16) +#define AC_DEFCFG_CONN_TYPE_SHIFT 16 +#define AC_DEFCFG_DEVICE (0xf<<20) +#define AC_DEFCFG_DEVICE_SHIFT 20 +#define AC_DEFCFG_LOCATION (0x3f<<24) +#define AC_DEFCFG_LOCATION_SHIFT 24 +#define AC_DEFCFG_PORT_CONN (0x3<<30) +#define AC_DEFCFG_PORT_CONN_SHIFT 30 + +/* device device types (0x0-0xf) */ +enum { + AC_JACK_LINE_OUT, + AC_JACK_SPEAKER, + AC_JACK_HP_OUT, + AC_JACK_CD, + AC_JACK_SPDIF_OUT, + AC_JACK_DIG_OTHER_OUT, + AC_JACK_MODEM_LINE_SIDE, + AC_JACK_MODEM_HAND_SIDE, + AC_JACK_LINE_IN, + AC_JACK_AUX, + AC_JACK_MIC_IN, + AC_JACK_TELEPHONY, + AC_JACK_SPDIF_IN, + AC_JACK_DIG_OTHER_IN, + AC_JACK_OTHER = 0xf, +}; + +/* jack connection types (0x0-0xf) */ +enum { + AC_JACK_CONN_UNKNOWN, + AC_JACK_CONN_1_8, + AC_JACK_CONN_1_4, + AC_JACK_CONN_ATAPI, + AC_JACK_CONN_RCA, + AC_JACK_CONN_OPTICAL, + AC_JACK_CONN_OTHER_DIGITAL, + AC_JACK_CONN_OTHER_ANALOG, + AC_JACK_CONN_DIN, + AC_JACK_CONN_XLR, + AC_JACK_CONN_RJ11, + AC_JACK_CONN_COMB, + AC_JACK_CONN_OTHER = 0xf, +}; + +/* jack colors (0x0-0xf) */ +enum { + AC_JACK_COLOR_UNKNOWN, + AC_JACK_COLOR_BLACK, + AC_JACK_COLOR_GREY, + AC_JACK_COLOR_BLUE, + AC_JACK_COLOR_GREEN, + AC_JACK_COLOR_RED, + AC_JACK_COLOR_ORANGE, + AC_JACK_COLOR_YELLOW, + AC_JACK_COLOR_PURPLE, + AC_JACK_COLOR_PINK, + AC_JACK_COLOR_WHITE = 0xe, + AC_JACK_COLOR_OTHER, +}; + +/* Jack location (0x0-0x3f) */ +/* common case */ +enum { + AC_JACK_LOC_NONE, + AC_JACK_LOC_REAR, + AC_JACK_LOC_FRONT, + AC_JACK_LOC_LEFT, + AC_JACK_LOC_RIGHT, + AC_JACK_LOC_TOP, + AC_JACK_LOC_BOTTOM, +}; +/* bits 4-5 */ +enum { + AC_JACK_LOC_EXTERNAL = 0x00, + AC_JACK_LOC_INTERNAL = 0x10, + AC_JACK_LOC_SEPARATE = 0x20, + AC_JACK_LOC_OTHER = 0x30, +}; +enum { + /* external on primary chasis */ + AC_JACK_LOC_REAR_PANEL = 0x07, + AC_JACK_LOC_DRIVE_BAY, + /* internal */ + AC_JACK_LOC_RISER = 0x17, + AC_JACK_LOC_HDMI, + AC_JACK_LOC_ATAPI, + /* others */ + AC_JACK_LOC_MOBILE_IN = 0x37, + AC_JACK_LOC_MOBILE_OUT, +}; + +/* Port connectivity (0-3) */ +enum { + AC_JACK_PORT_COMPLEX, + AC_JACK_PORT_NONE, + AC_JACK_PORT_FIXED, + AC_JACK_PORT_BOTH, +}; + +/* max. connections to a widget */ +#define HDA_MAX_CONNECTIONS 32 + +/* max. codec address */ +#define HDA_MAX_CODEC_ADDRESS 0x0f + +/* max number of PCM devics per card */ +#define HDA_MAX_PCMS 10 + +/* --------------------------------------------------------------------- */ + +#endif |