aboutsummaryrefslogtreecommitdiff
path: root/hw/arm_gic.c
diff options
context:
space:
mode:
Diffstat (limited to 'hw/arm_gic.c')
-rw-r--r--hw/arm_gic.c68
1 files changed, 38 insertions, 30 deletions
diff --git a/hw/arm_gic.c b/hw/arm_gic.c
index 0339cf59fb..cf582a5a14 100644
--- a/hw/arm_gic.c
+++ b/hw/arm_gic.c
@@ -11,6 +11,8 @@
controller, MPCore distributed interrupt controller and ARMv7-M
Nested Vectored Interrupt Controller. */
+/* Maximum number of possible interrupts, determined by the GIC architecture */
+#define GIC_MAXIRQ 1020
//#define DEBUG_GIC
#ifdef DEBUG_GIC
@@ -86,13 +88,13 @@ typedef struct gic_state
int enabled;
int cpu_enabled[NCPU];
- gic_irq_state irq_state[GIC_NIRQ];
+ gic_irq_state irq_state[GIC_MAXIRQ];
#ifndef NVIC
- int irq_target[GIC_NIRQ];
+ int irq_target[GIC_MAXIRQ];
#endif
int priority1[32][NCPU];
- int priority2[GIC_NIRQ - 32];
- int last_active[GIC_NIRQ][NCPU];
+ int priority2[GIC_MAXIRQ - 32];
+ int last_active[GIC_MAXIRQ][NCPU];
int priority_mask[NCPU];
int running_irq[NCPU];
@@ -111,6 +113,7 @@ typedef struct gic_state
struct gic_state *backref[NCPU];
MemoryRegion cpuiomem[NCPU+1]; /* CPU interfaces */
#endif
+ uint32_t num_irq;
} gic_state;
/* TODO: Many places that call this routine could be optimized. */
@@ -133,7 +136,7 @@ static void gic_update(gic_state *s)
}
best_prio = 0x100;
best_irq = 1023;
- for (irq = 0; irq < GIC_NIRQ; irq++) {
+ for (irq = 0; irq < s->num_irq; irq++) {
if (GIC_TEST_ENABLED(irq, cm) && GIC_TEST_PENDING(irq, cm)) {
if (GIC_GET_PRIORITY(irq, cpu) < best_prio) {
best_prio = GIC_GET_PRIORITY(irq, cpu);
@@ -222,7 +225,7 @@ static void gic_complete_irq(gic_state * s, int cpu, int irq)
int update = 0;
int cm = 1 << cpu;
DPRINTF("EOI %d\n", irq);
- if (irq >= GIC_NIRQ) {
+ if (irq >= s->num_irq) {
/* This handles two cases:
* 1. If software writes the ID of a spurious interrupt [ie 1023]
* to the GICC_EOIR, the GIC ignores that write.
@@ -279,7 +282,7 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
if (offset == 0)
return s->enabled;
if (offset == 4)
- return ((GIC_NIRQ / 32) - 1) | ((NUM_CPU(s) - 1) << 5);
+ return ((s->num_irq / 32) - 1) | ((NUM_CPU(s) - 1) << 5);
if (offset < 0x08)
return 0;
if (offset >= 0x80) {
@@ -295,7 +298,7 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
else
irq = (offset - 0x180) * 8;
irq += GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
res = 0;
for (i = 0; i < 8; i++) {
@@ -310,7 +313,7 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
else
irq = (offset - 0x280) * 8;
irq += GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
res = 0;
mask = (irq < 32) ? cm : ALL_CPU_MASK;
@@ -322,7 +325,7 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
} else if (offset < 0x400) {
/* Interrupt Active. */
irq = (offset - 0x300) * 8 + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
res = 0;
mask = (irq < 32) ? cm : ALL_CPU_MASK;
@@ -334,14 +337,14 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
} else if (offset < 0x800) {
/* Interrupt Priority. */
irq = (offset - 0x400) + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
res = GIC_GET_PRIORITY(irq, cpu);
#ifndef NVIC
} else if (offset < 0xc00) {
/* Interrupt CPU Target. */
irq = (offset - 0x800) + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
if (irq >= 29 && irq <= 31) {
res = cm;
@@ -351,7 +354,7 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
} else if (offset < 0xf00) {
/* Interrupt Configuration. */
irq = (offset - 0xc00) * 2 + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
res = 0;
for (i = 0; i < 4; i++) {
@@ -426,7 +429,7 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
} else if (offset < 0x180) {
/* Interrupt Set Enable. */
irq = (offset - 0x100) * 8 + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
if (irq < 16)
value = 0xff;
@@ -451,7 +454,7 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
} else if (offset < 0x200) {
/* Interrupt Clear Enable. */
irq = (offset - 0x180) * 8 + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
if (irq < 16)
value = 0;
@@ -468,7 +471,7 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
} else if (offset < 0x280) {
/* Interrupt Set Pending. */
irq = (offset - 0x200) * 8 + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
if (irq < 16)
irq = 0;
@@ -481,7 +484,7 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
} else if (offset < 0x300) {
/* Interrupt Clear Pending. */
irq = (offset - 0x280) * 8 + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
for (i = 0; i < 8; i++) {
/* ??? This currently clears the pending bit for all CPUs, even
@@ -497,7 +500,7 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
} else if (offset < 0x800) {
/* Interrupt Priority. */
irq = (offset - 0x400) + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
if (irq < 32) {
s->priority1[irq][cpu] = value;
@@ -508,7 +511,7 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
} else if (offset < 0xc00) {
/* Interrupt CPU Target. */
irq = (offset - 0x800) + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
if (irq < 29)
value = 0;
@@ -518,7 +521,7 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
} else if (offset < 0xf00) {
/* Interrupt Configuration. */
irq = (offset - 0xc00) * 4 + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
if (irq < 32)
value |= 0xaa;
@@ -699,7 +702,7 @@ static const MemoryRegionOps gic_cpu_ops = {
static void gic_reset(gic_state *s)
{
int i;
- memset(s->irq_state, 0, GIC_NIRQ * sizeof(gic_irq_state));
+ memset(s->irq_state, 0, GIC_MAXIRQ * sizeof(gic_irq_state));
for (i = 0 ; i < NUM_CPU(s); i++) {
s->priority_mask[i] = 0xf0;
s->current_pending[i] = 1023;
@@ -735,17 +738,17 @@ static void gic_save(QEMUFile *f, void *opaque)
qemu_put_be32(f, s->cpu_enabled[i]);
for (j = 0; j < 32; j++)
qemu_put_be32(f, s->priority1[j][i]);
- for (j = 0; j < GIC_NIRQ; j++)
+ for (j = 0; j < s->num_irq; j++)
qemu_put_be32(f, s->last_active[j][i]);
qemu_put_be32(f, s->priority_mask[i]);
qemu_put_be32(f, s->running_irq[i]);
qemu_put_be32(f, s->running_priority[i]);
qemu_put_be32(f, s->current_pending[i]);
}
- for (i = 0; i < GIC_NIRQ - 32; i++) {
+ for (i = 0; i < s->num_irq - 32; i++) {
qemu_put_be32(f, s->priority2[i]);
}
- for (i = 0; i < GIC_NIRQ; i++) {
+ for (i = 0; i < s->num_irq; i++) {
#ifndef NVIC
qemu_put_be32(f, s->irq_target[i]);
#endif
@@ -772,17 +775,17 @@ static int gic_load(QEMUFile *f, void *opaque, int version_id)
s->cpu_enabled[i] = qemu_get_be32(f);
for (j = 0; j < 32; j++)
s->priority1[j][i] = qemu_get_be32(f);
- for (j = 0; j < GIC_NIRQ; j++)
+ for (j = 0; j < s->num_irq; j++)
s->last_active[j][i] = qemu_get_be32(f);
s->priority_mask[i] = qemu_get_be32(f);
s->running_irq[i] = qemu_get_be32(f);
s->running_priority[i] = qemu_get_be32(f);
s->current_pending[i] = qemu_get_be32(f);
}
- for (i = 0; i < GIC_NIRQ - 32; i++) {
+ for (i = 0; i < s->num_irq - 32; i++) {
s->priority2[i] = qemu_get_be32(f);
}
- for (i = 0; i < GIC_NIRQ; i++) {
+ for (i = 0; i < s->num_irq; i++) {
#ifndef NVIC
s->irq_target[i] = qemu_get_be32(f);
#endif
@@ -798,9 +801,9 @@ static int gic_load(QEMUFile *f, void *opaque, int version_id)
}
#if NCPU > 1
-static void gic_init(gic_state *s, int num_cpu)
+static void gic_init(gic_state *s, int num_cpu, int num_irq)
#else
-static void gic_init(gic_state *s)
+static void gic_init(gic_state *s, int num_irq)
#endif
{
int i;
@@ -808,7 +811,12 @@ static void gic_init(gic_state *s)
#if NCPU > 1
s->num_cpu = num_cpu;
#endif
- qdev_init_gpio_in(&s->busdev.qdev, gic_set_irq, GIC_NIRQ - 32);
+ s->num_irq = num_irq + GIC_BASE_IRQ;
+ if (s->num_irq > GIC_MAXIRQ) {
+ hw_error("requested %u interrupt lines exceeds GIC maximum %d\n",
+ num_irq, GIC_MAXIRQ);
+ }
+ qdev_init_gpio_in(&s->busdev.qdev, gic_set_irq, s->num_irq - 32);
for (i = 0; i < NUM_CPU(s); i++) {
sysbus_init_irq(&s->busdev, &s->parent_irq[i]);
}
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-30 16:15:58 +0000