diff options
Diffstat (limited to 'hw/arm')
| -rw-r--r-- | hw/arm/meson.build | 1 | ||||
| -rw-r--r-- | hw/arm/nseries.c | 1473 |
2 files changed, 0 insertions, 1474 deletions
diff --git a/hw/arm/meson.build b/hw/arm/meson.build index 094366fbd5..83787cfdfc 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -12,7 +12,6 @@ arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c')) arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c')) arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c')) arm_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx.c', 'npcm7xx_boards.c')) -arm_ss.add(when: 'CONFIG_NSERIES', if_true: files('nseries.c')) arm_ss.add(when: 'CONFIG_REALVIEW', if_true: files('realview.c')) arm_ss.add(when: 'CONFIG_SBSA_REF', if_true: files('sbsa-ref.c')) arm_ss.add(when: 'CONFIG_STELLARIS', if_true: files('stellaris.c')) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c deleted file mode 100644 index 35364312c7..0000000000 --- a/hw/arm/nseries.c +++ /dev/null @@ -1,1473 +0,0 @@ -/* - * Nokia N-series internet tablets. - * - * Copyright (C) 2007 Nokia Corporation - * Written by Andrzej Zaborowski <andrew@openedhand.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 or - * (at your option) version 3 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -#include "qemu/osdep.h" -#include "qapi/error.h" -#include "cpu.h" -#include "chardev/char.h" -#include "qemu/cutils.h" -#include "qemu/bswap.h" -#include "qemu/hw-version.h" -#include "sysemu/reset.h" -#include "sysemu/runstate.h" -#include "sysemu/sysemu.h" -#include "hw/arm/omap.h" -#include "hw/arm/boot.h" -#include "hw/irq.h" -#include "ui/console.h" -#include "hw/boards.h" -#include "hw/i2c/i2c.h" -#include "hw/display/blizzard.h" -#include "hw/input/lm832x.h" -#include "hw/input/tsc2xxx.h" -#include "hw/misc/cbus.h" -#include "hw/sensor/tmp105.h" -#include "hw/qdev-properties.h" -#include "hw/block/flash.h" -#include "hw/hw.h" -#include "hw/loader.h" -#include "hw/sysbus.h" -#include "qemu/log.h" -#include "qemu/error-report.h" - - -/* Nokia N8x0 support */ -struct n800_s { - struct omap_mpu_state_s *mpu; - - struct rfbi_chip_s blizzard; - struct { - void *opaque; - uint32_t (*txrx)(void *opaque, uint32_t value, int len); - uWireSlave *chip; - } ts; - - int keymap[0x80]; - DeviceState *kbd; - - DeviceState *usb; - void *retu; - void *tahvo; - DeviceState *nand; -}; - -/* GPIO pins */ -#define N8X0_TUSB_ENABLE_GPIO 0 -#define N800_MMC2_WP_GPIO 8 -#define N800_UNKNOWN_GPIO0 9 /* out */ -#define N810_MMC2_VIOSD_GPIO 9 -#define N810_HEADSET_AMP_GPIO 10 -#define N800_CAM_TURN_GPIO 12 -#define N810_GPS_RESET_GPIO 12 -#define N800_BLIZZARD_POWERDOWN_GPIO 15 -#define N800_MMC1_WP_GPIO 23 -#define N810_MMC2_VSD_GPIO 23 -#define N8X0_ONENAND_GPIO 26 -#define N810_BLIZZARD_RESET_GPIO 30 -#define N800_UNKNOWN_GPIO2 53 /* out */ -#define N8X0_TUSB_INT_GPIO 58 -#define N8X0_BT_WKUP_GPIO 61 -#define N8X0_STI_GPIO 62 -#define N8X0_CBUS_SEL_GPIO 64 -#define N8X0_CBUS_DAT_GPIO 65 -#define N8X0_CBUS_CLK_GPIO 66 -#define N8X0_WLAN_IRQ_GPIO 87 -#define N8X0_BT_RESET_GPIO 92 -#define N8X0_TEA5761_CS_GPIO 93 -#define N800_UNKNOWN_GPIO 94 -#define N810_TSC_RESET_GPIO 94 -#define N800_CAM_ACT_GPIO 95 -#define N810_GPS_WAKEUP_GPIO 95 -#define N8X0_MMC_CS_GPIO 96 -#define N8X0_WLAN_PWR_GPIO 97 -#define N8X0_BT_HOST_WKUP_GPIO 98 -#define N810_SPEAKER_AMP_GPIO 101 -#define N810_KB_LOCK_GPIO 102 -#define N800_TSC_TS_GPIO 103 -#define N810_TSC_TS_GPIO 106 -#define N8X0_HEADPHONE_GPIO 107 -#define N8X0_RETU_GPIO 108 -#define N800_TSC_KP_IRQ_GPIO 109 -#define N810_KEYBOARD_GPIO 109 -#define N800_BAT_COVER_GPIO 110 -#define N810_SLIDE_GPIO 110 -#define N8X0_TAHVO_GPIO 111 -#define N800_UNKNOWN_GPIO4 112 /* out */ -#define N810_SLEEPX_LED_GPIO 112 -#define N800_TSC_RESET_GPIO 118 /* ? */ -#define N810_AIC33_RESET_GPIO 118 -#define N800_TSC_UNKNOWN_GPIO 119 /* out */ -#define N8X0_TMP105_GPIO 125 - -/* Config */ -#define BT_UART 0 -#define XLDR_LL_UART 1 - -/* Addresses on the I2C bus 0 */ -#define N810_TLV320AIC33_ADDR 0x18 /* Audio CODEC */ -#define N8X0_TCM825x_ADDR 0x29 /* Camera */ -#define N810_LP5521_ADDR 0x32 /* LEDs */ -#define N810_TSL2563_ADDR 0x3d /* Light sensor */ -#define N810_LM8323_ADDR 0x45 /* Keyboard */ -/* Addresses on the I2C bus 1 */ -#define N8X0_TMP105_ADDR 0x48 /* Temperature sensor */ -#define N8X0_MENELAUS_ADDR 0x72 /* Power management */ - -/* Chipselects on GPMC NOR interface */ -#define N8X0_ONENAND_CS 0 -#define N8X0_USB_ASYNC_CS 1 -#define N8X0_USB_SYNC_CS 4 - -#define N8X0_BD_ADDR 0x00, 0x1a, 0x89, 0x9e, 0x3e, 0x81 - -static void n800_mmc_cs_cb(void *opaque, int line, int level) -{ - /* TODO: this seems to actually be connected to the menelaus, to - * which also both MMC slots connect. */ - omap_mmc_enable((struct omap_mmc_s *) opaque, !level); -} - -static void n8x0_gpio_setup(struct n800_s *s) -{ - qdev_connect_gpio_out(s->mpu->gpio, N8X0_MMC_CS_GPIO, - qemu_allocate_irq(n800_mmc_cs_cb, s->mpu->mmc, 0)); - qemu_irq_lower(qdev_get_gpio_in(s->mpu->gpio, N800_BAT_COVER_GPIO)); -} - -#define MAEMO_CAL_HEADER(...) \ - 'C', 'o', 'n', 'F', 0x02, 0x00, 0x04, 0x00, \ - __VA_ARGS__, \ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - -static const uint8_t n8x0_cal_wlan_mac[] = { - MAEMO_CAL_HEADER('w', 'l', 'a', 'n', '-', 'm', 'a', 'c') - 0x1c, 0x00, 0x00, 0x00, 0x47, 0xd6, 0x69, 0xb3, - 0x30, 0x08, 0xa0, 0x83, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x1a, 0x00, 0x00, 0x00, - 0x89, 0x00, 0x00, 0x00, 0x9e, 0x00, 0x00, 0x00, - 0x5d, 0x00, 0x00, 0x00, 0xc1, 0x00, 0x00, 0x00, -}; - -static const uint8_t n8x0_cal_bt_id[] = { - MAEMO_CAL_HEADER('b', 't', '-', 'i', 'd', 0, 0, 0) - 0x0a, 0x00, 0x00, 0x00, 0xa3, 0x4b, 0xf6, 0x96, - 0xa8, 0xeb, 0xb2, 0x41, 0x00, 0x00, 0x00, 0x00, - N8X0_BD_ADDR, -}; - -static void n8x0_nand_setup(struct n800_s *s) -{ - char *otp_region; - DriveInfo *dinfo; - - s->nand = qdev_new("onenand"); - qdev_prop_set_uint16(s->nand, "manufacturer_id", NAND_MFR_SAMSUNG); - /* Either 0x40 or 0x48 are OK for the device ID */ - qdev_prop_set_uint16(s->nand, "device_id", 0x48); - qdev_prop_set_uint16(s->nand, "version_id", 0); - qdev_prop_set_int32(s->nand, "shift", 1); - dinfo = drive_get(IF_MTD, 0, 0); - if (dinfo) { - qdev_prop_set_drive_err(s->nand, "drive", blk_by_legacy_dinfo(dinfo), - &error_fatal); - } - sysbus_realize_and_unref(SYS_BUS_DEVICE(s->nand), &error_fatal); - sysbus_connect_irq(SYS_BUS_DEVICE(s->nand), 0, - qdev_get_gpio_in(s->mpu->gpio, N8X0_ONENAND_GPIO)); - omap_gpmc_attach(s->mpu->gpmc, N8X0_ONENAND_CS, - sysbus_mmio_get_region(SYS_BUS_DEVICE(s->nand), 0)); - otp_region = onenand_raw_otp(s->nand); - - memcpy(otp_region + 0x000, n8x0_cal_wlan_mac, sizeof(n8x0_cal_wlan_mac)); - memcpy(otp_region + 0x800, n8x0_cal_bt_id, sizeof(n8x0_cal_bt_id)); - /* XXX: in theory should also update the OOB for both pages */ -} - -static qemu_irq n8x0_system_powerdown; - -static void n8x0_powerdown_req(Notifier *n, void *opaque) -{ - qemu_irq_raise(n8x0_system_powerdown); -} - -static Notifier n8x0_system_powerdown_notifier = { - .notify = n8x0_powerdown_req -}; - -static void n8x0_i2c_setup(struct n800_s *s) -{ - DeviceState *dev; - qemu_irq tmp_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TMP105_GPIO); - I2CBus *i2c = omap_i2c_bus(s->mpu->i2c[0]); - - /* Attach a menelaus PM chip */ - dev = DEVICE(i2c_slave_create_simple(i2c, "twl92230", N8X0_MENELAUS_ADDR)); - qdev_connect_gpio_out(dev, 3, - qdev_get_gpio_in(s->mpu->ih[0], - OMAP_INT_24XX_SYS_NIRQ)); - - n8x0_system_powerdown = qdev_get_gpio_in(dev, 3); - qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier); - - /* Attach a TMP105 PM chip (A0 wired to ground) */ - dev = DEVICE(i2c_slave_create_simple(i2c, TYPE_TMP105, N8X0_TMP105_ADDR)); - qdev_connect_gpio_out(dev, 0, tmp_irq); -} - -/* Touchscreen and keypad controller */ -static const MouseTransformInfo n800_pointercal = { - .x = 800, - .y = 480, - .a = { 14560, -68, -3455208, -39, -9621, 35152972, 65536 }, -}; - -static const MouseTransformInfo n810_pointercal = { - .x = 800, - .y = 480, - .a = { 15041, 148, -4731056, 171, -10238, 35933380, 65536 }, -}; - -#define RETU_KEYCODE 61 /* F3 */ - -static void n800_key_event(void *opaque, int keycode) -{ - struct n800_s *s = (struct n800_s *) opaque; - int code = s->keymap[keycode & 0x7f]; - - if (code == -1) { - if ((keycode & 0x7f) == RETU_KEYCODE) { - retu_key_event(s->retu, !(keycode & 0x80)); - } - return; - } - - tsc210x_key_event(s->ts.chip, code, !(keycode & 0x80)); -} - -static const int n800_keys[16] = { - -1, - 72, /* Up */ - 63, /* Home (F5) */ - -1, - 75, /* Left */ - 28, /* Enter */ - 77, /* Right */ - -1, - 1, /* Cycle (ESC) */ - 80, /* Down */ - 62, /* Menu (F4) */ - -1, - 66, /* Zoom- (F8) */ - 64, /* FullScreen (F6) */ - 65, /* Zoom+ (F7) */ - -1, -}; - -static void n800_tsc_kbd_setup(struct n800_s *s) -{ - int i; - - /* XXX: are the three pins inverted inside the chip between the - * tsc and the cpu (N4111)? */ - qemu_irq penirq = NULL; /* NC */ - qemu_irq kbirq = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_KP_IRQ_GPIO); - qemu_irq dav = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_TS_GPIO); - - s->ts.chip = tsc2301_init(penirq, kbirq, dav); - s->ts.opaque = s->ts.chip->opaque; - s->ts.txrx = tsc210x_txrx; - - for (i = 0; i < 0x80; i++) { - s->keymap[i] = -1; - } - for (i = 0; i < 0x10; i++) { - if (n800_keys[i] >= 0) { - s->keymap[n800_keys[i]] = i; - } - } - - qemu_add_kbd_event_handler(n800_key_event, s); - - tsc210x_set_transform(s->ts.chip, &n800_pointercal); -} - -static void n810_tsc_setup(struct n800_s *s) -{ - qemu_irq pintdav = qdev_get_gpio_in(s->mpu->gpio, N810_TSC_TS_GPIO); - - s->ts.opaque = tsc2005_init(pintdav); - s->ts.txrx = tsc2005_txrx; - - tsc2005_set_transform(s->ts.opaque, &n810_pointercal); -} - -/* N810 Keyboard controller */ -static void n810_key_event(void *opaque, int keycode) -{ - struct n800_s *s = (struct n800_s *) opaque; - int code = s->keymap[keycode & 0x7f]; - - if (code == -1) { - if ((keycode & 0x7f) == RETU_KEYCODE) { - retu_key_event(s->retu, !(keycode & 0x80)); - } - return; - } - - lm832x_key_event(s->kbd, code, !(keycode & 0x80)); -} - -#define M 0 - -static const int n810_keys[0x80] = { - [0x01] = 16, /* Q */ - [0x02] = 37, /* K */ - [0x03] = 24, /* O */ - [0x04] = 25, /* P */ - [0x05] = 14, /* Backspace */ - [0x06] = 30, /* A */ - [0x07] = 31, /* S */ - [0x08] = 32, /* D */ - [0x09] = 33, /* F */ - [0x0a] = 34, /* G */ - [0x0b] = 35, /* H */ - [0x0c] = 36, /* J */ - - [0x11] = 17, /* W */ - [0x12] = 62, /* Menu (F4) */ - [0x13] = 38, /* L */ - [0x14] = 40, /* ' (Apostrophe) */ - [0x16] = 44, /* Z */ - [0x17] = 45, /* X */ - [0x18] = 46, /* C */ - [0x19] = 47, /* V */ - [0x1a] = 48, /* B */ - [0x1b] = 49, /* N */ - [0x1c] = 42, /* Shift (Left shift) */ - [0x1f] = 65, /* Zoom+ (F7) */ - - [0x21] = 18, /* E */ - [0x22] = 39, /* ; (Semicolon) */ - [0x23] = 12, /* - (Minus) */ - [0x24] = 13, /* = (Equal) */ - [0x2b] = 56, /* Fn (Left Alt) */ - [0x2c] = 50, /* M */ - [0x2f] = 66, /* Zoom- (F8) */ - - [0x31] = 19, /* R */ - [0x32] = 29 | M, /* Right Ctrl */ - [0x34] = 57, /* Space */ - [0x35] = 51, /* , (Comma) */ - [0x37] = 72 | M, /* Up */ - [0x3c] = 82 | M, /* Compose (Insert) */ - [0x3f] = 64, /* FullScreen (F6) */ - - [0x41] = 20, /* T */ - [0x44] = 52, /* . (Dot) */ - [0x46] = 77 | M, /* Right */ - [0x4f] = 63, /* Home (F5) */ - [0x51] = 21, /* Y */ - [0x53] = 80 | M, /* Down */ - [0x55] = 28, /* Enter */ - [0x5f] = 1, /* Cycle (ESC) */ - - [0x61] = 22, /* U */ - [0x64] = 75 | M, /* Left */ - - [0x71] = 23, /* I */ -#if 0 - [0x75] = 28 | M, /* KP Enter (KP Enter) */ -#else - [0x75] = 15, /* KP Enter (Tab) */ -#endif -}; - -#undef M - -static void n810_kbd_setup(struct n800_s *s) -{ - qemu_irq kbd_irq = qdev_get_gpio_in(s->mpu->gpio, N810_KEYBOARD_GPIO); - int i; - - for (i = 0; i < 0x80; i++) { - s->keymap[i] = -1; - } - for (i = 0; i < 0x80; i++) { - if (n810_keys[i] > 0) { - s->keymap[n810_keys[i]] = i; - } - } - - qemu_add_kbd_event_handler(n810_key_event, s); - - /* Attach the LM8322 keyboard to the I2C bus, - * should happen in n8x0_i2c_setup and s->kbd be initialised here. */ - s->kbd = DEVICE(i2c_slave_create_simple(omap_i2c_bus(s->mpu->i2c[0]), - TYPE_LM8323, N810_LM8323_ADDR)); - qdev_connect_gpio_out(s->kbd, 0, kbd_irq); -} - -/* LCD MIPI DBI-C controller (URAL) */ -struct mipid_s { - int resp[4]; - int param[4]; - int p; - int pm; - int cmd; - - int sleep; - int booster; - int te; - int selfcheck; - int partial; - int normal; - int vscr; - int invert; - int onoff; - int gamma; - uint32_t id; -}; - -static void mipid_reset(struct mipid_s *s) -{ - s->pm = 0; - s->cmd = 0; - - s->sleep = 1; - s->booster = 0; - s->selfcheck = - (1 << 7) | /* Register loading OK. */ - (1 << 5) | /* The chip is attached. */ - (1 << 4); /* Display glass still in one piece. */ - s->te = 0; - s->partial = 0; - s->normal = 1; - s->vscr = 0; - s->invert = 0; - s->onoff = 1; - s->gamma = 0; -} - -static uint32_t mipid_txrx(void *opaque, uint32_t cmd, int len) -{ - struct mipid_s *s = (struct mipid_s *) opaque; - uint8_t ret; - - if (len > 9) { - hw_error("%s: FIXME: bad SPI word width %i\n", __func__, len); - } - - if (s->p >= ARRAY_SIZE(s->resp)) { - ret = 0; - } else { - ret = s->resp[s->p++]; - } - if (s->pm-- > 0) { - s->param[s->pm] = cmd; - } else { - s->cmd = cmd; - } - - switch (s->cmd) { - case 0x00: /* NOP */ - break; - - case 0x01: /* SWRESET */ - mipid_reset(s); - break; - - case 0x02: /* BSTROFF */ - s->booster = 0; - break; - case 0x03: /* BSTRON */ - s->booster = 1; - break; - - case 0x04: /* RDDID */ - s->p = 0; - s->resp[0] = (s->id >> 16) & 0xff; - s->resp[1] = (s->id >> 8) & 0xff; - s->resp[2] = (s->id >> 0) & 0xff; - break; - - case 0x06: /* RD_RED */ - case 0x07: /* RD_GREEN */ - /* XXX the bootloader sometimes issues RD_BLUE meaning RDDID so - * for the bootloader one needs to change this. */ - case 0x08: /* RD_BLUE */ - s->p = 0; - /* TODO: return first pixel components */ - s->resp[0] = 0x01; - break; - - case 0x09: /* RDDST */ - s->p = 0; - s->resp[0] = s->booster << 7; - s->resp[1] = (5 << 4) | (s->partial << 2) | - (s->sleep << 1) | s->normal; - s->resp[2] = (s->vscr << 7) | (s->invert << 5) | - (s->onoff << 2) | (s->te << 1) | (s->gamma >> 2); - s->resp[3] = s->gamma << 6; - break; - - case 0x0a: /* RDDPM */ - s->p = 0; - s->resp[0] = (s->onoff << 2) | (s->normal << 3) | (s->sleep << 4) | - (s->partial << 5) | (s->sleep << 6) | (s->booster << 7); - break; - case 0x0b: /* RDDMADCTR */ - s->p = 0; - s->resp[0] = 0; - break; - case 0x0c: /* RDDCOLMOD */ - s->p = 0; - s->resp[0] = 5; /* 65K colours */ - break; - case 0x0d: /* RDDIM */ - s->p = 0; - s->resp[0] = (s->invert << 5) | (s->vscr << 7) | s->gamma; - break; - case 0x0e: /* RDDSM */ - s->p = 0; - s->resp[0] = s->te << 7; - break; - case 0x0f: /* RDDSDR */ - s->p = 0; - s->resp[0] = s->selfcheck; - break; - - case 0x10: /* SLPIN */ - s->sleep = 1; - break; - case 0x11: /* SLPOUT */ - s->sleep = 0; - s->selfcheck ^= 1 << 6; /* POFF self-diagnosis Ok */ - break; - - case 0x12: /* PTLON */ - s->partial = 1; - s->normal = 0; - s->vscr = 0; - break; - case 0x13: /* NORON */ - s->partial = 0; - s->normal = 1; - s->vscr = 0; - break; - - case 0x20: /* INVOFF */ - s->invert = 0; - break; - case 0x21: /* INVON */ - s->invert = 1; - break; - - case 0x22: /* APOFF */ - case 0x23: /* APON */ - goto bad_cmd; - - case 0x25: /* WRCNTR */ - if (s->pm < 0) { - s->pm = 1; - } - goto bad_cmd; - - case 0x26: /* GAMSET */ - if (!s->pm) { - s->gamma = ctz32(s->param[0] & 0xf); - if (s->gamma == 32) { - s->gamma = -1; /* XXX: should this be 0? */ - } - } else if (s->pm < 0) { - s->pm = 1; - } - break; - - case 0x28: /* DISPOFF */ - s->onoff = 0; - break; - case 0x29: /* DISPON */ - s->onoff = 1; - break; - - case 0x2a: /* CASET */ - case 0x2b: /* RASET */ - case 0x2c: /* RAMWR */ - case 0x2d: /* RGBSET */ - case 0x2e: /* RAMRD */ - case 0x30: /* PTLAR */ - case 0x33: /* SCRLAR */ - goto bad_cmd; - - case 0x34: /* TEOFF */ - s->te = 0; - break; - case 0x35: /* TEON */ - if (!s->pm) { - s->te = 1; - } else if (s->pm < 0) { - s->pm = 1; - } - break; - - case 0x36: /* MADCTR */ - goto bad_cmd; - - case 0x37: /* VSCSAD */ - s->partial = 0; - s->normal = 0; - s->vscr = 1; - break; - - case 0x38: /* IDMOFF */ - case 0x39: /* IDMON */ - case 0x3a: /* COLMOD */ - goto bad_cmd; - - case 0xb0: /* CLKINT / DISCTL */ - case 0xb1: /* CLKEXT */ - if (s->pm < 0) { - s->pm = 2; - } - break; - - case 0xb4: /* FRMSEL */ - break; - - case 0xb5: /* FRM8SEL */ - case 0xb6: /* TMPRNG / INIESC */ - case 0xb7: /* TMPHIS / NOP2 */ - case 0xb8: /* TMPREAD / MADCTL */ - case 0xba: /* DISTCTR */ - case 0xbb: /* EPVOL */ - goto bad_cmd; - - case 0xbd: /* Unknown */ - s->p = 0; - s->resp[0] = 0; - s->resp[1] = 1; - break; - - case 0xc2: /* IFMOD */ - if (s->pm < 0) { - s->pm = 2; - } - break; - - case 0xc6: /* PWRCTL */ - case 0xc7: /* PPWRCTL */ - case 0xd0: /* EPWROUT */ - case 0xd1: /* EPWRIN */ - case 0xd4: /* RDEV */ - case 0xd5: /* RDRR */ - goto bad_cmd; - - case 0xda: /* RDID1 */ - s->p = 0; - s->resp[0] = (s->id >> 16) & 0xff; - break; - case 0xdb: /* RDID2 */ - s->p = 0; - s->resp[0] = (s->id >> 8) & 0xff; - break; - case 0xdc: /* RDID3 */ - s->p = 0; - s->resp[0] = (s->id >> 0) & 0xff; - break; - - default: - bad_cmd: - qemu_log_mask(LOG_GUEST_ERROR, - "%s: unknown command 0x%02x\n", __func__, s->cmd); - break; - } - - return ret; -} - -static void *mipid_init(void) -{ - struct mipid_s *s = g_malloc0(sizeof(*s)); - - s->id = 0x838f03; - mipid_reset(s); - - return s; -} - -static void n8x0_spi_setup(struct n800_s *s) -{ - void *tsc = s->ts.opaque; - void *mipid = mipid_init(); - - omap_mcspi_attach(s->mpu->mcspi[0], s->ts.txrx, tsc, 0); - omap_mcspi_attach(s->mpu->mcspi[0], mipid_txrx, mipid, 1); -} - -/* This task is normally performed by the bootloader. If we're loading - * a kernel directly, we need to enable the Blizzard ourselves. */ -static void n800_dss_init(struct rfbi_chip_s *chip) -{ - uint8_t *fb_blank; - - chip->write(chip->opaque, 0, 0x2a); /* LCD Width register */ - chip->write(chip->opaque, 1, 0x64); - chip->write(chip->opaque, 0, 0x2c); /* LCD HNDP register */ - chip->write(chip->opaque, 1, 0x1e); - chip->write(chip->opaque, 0, 0x2e); /* LCD Height 0 register */ - chip->write(chip->opaque, 1, 0xe0); - chip->write(chip->opaque, 0, 0x30); /* LCD Height 1 register */ - chip->write(chip->opaque, 1, 0x01); - chip->write(chip->opaque, 0, 0x32); /* LCD VNDP register */ - chip->write(chip->opaque, 1, 0x06); - chip->write(chip->opaque, 0, 0x68); /* Display Mode register */ - chip->write(chip->opaque, 1, 1); /* Enable bit */ - - chip->write(chip->opaque, 0, 0x6c); - chip->write(chip->opaque, 1, 0x00); /* Input X Start Position */ - chip->write(chip->opaque, 1, 0x00); /* Input X Start Position */ - chip->write(chip->opaque, 1, 0x00); /* Input Y Start Position */ - chip->write(chip->opaque, 1, 0x00); /* Input Y Start Position */ - chip->write(chip->opaque, 1, 0x1f); /* Input X End Position */ - chip->write(chip->opaque, 1, 0x03); /* Input X End Position */ - chip->write(chip->opaque, 1, 0xdf); /* Input Y End Position */ - chip->write(chip->opaque, 1, 0x01); /* Input Y End Position */ - chip->write(chip->opaque, 1, 0x00); /* Output X Start Position */ - chip->write(chip->opaque, 1, 0x00); /* Output X Start Position */ - chip->write(chip->opaque, 1, 0x00); /* Output Y Start Position */ - chip->write(chip->opaque, 1, 0x00); /* Output Y Start Position */ - chip->write(chip->opaque, 1, 0x1f); /* Output X End Position */ - chip->write(chip->opaque, 1, 0x03); /* Output X End Position */ - chip->write(chip->opaque, 1, 0xdf); /* Output Y End Position */ - chip->write(chip->opaque, 1, 0x01); /* Output Y End Position */ - chip->write(chip->opaque, 1, 0x01); /* Input Data Format */ - chip->write(chip->opaque, 1, 0x01); /* Data Source Select */ - - fb_blank = memset(g_malloc(800 * 480 * 2), 0xff, 800 * 480 * 2); - /* Display Memory Data Port */ - chip->block(chip->opaque, 1, fb_blank, 800 * 480 * 2, 800); - g_free(fb_blank); -} - -static void n8x0_dss_setup(struct n800_s *s) -{ - s->blizzard.opaque = s1d13745_init(NULL); - s->blizzard.block = s1d13745_write_block; - s->blizzard.write = s1d13745_write; - s->blizzard.read = s1d13745_read; - - omap_rfbi_attach(s->mpu->dss, 0, &s->blizzard); -} - -static void n8x0_cbus_setup(struct n800_s *s) -{ - qemu_irq dat_out = qdev_get_gpio_in(s->mpu->gpio, N8X0_CBUS_DAT_GPIO); - qemu_irq retu_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_RETU_GPIO); - qemu_irq tahvo_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TAHVO_GPIO); - - CBus *cbus = cbus_init(dat_out); - - qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_CLK_GPIO, cbus->clk); - qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_DAT_GPIO, cbus->dat); - qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_SEL_GPIO, cbus->sel); - - cbus_attach(cbus, s->retu = retu_init(retu_irq, 1)); - cbus_attach(cbus, s->tahvo = tahvo_init(tahvo_irq, 1)); -} - -static void n8x0_usb_setup(struct n800_s *s) -{ - SysBusDevice *dev; - s->usb = qdev_new("tusb6010"); - dev = SYS_BUS_DEVICE(s->usb); - sysbus_realize_and_unref(dev, &error_fatal); - sysbus_connect_irq(dev, 0, - qdev_get_gpio_in(s->mpu->gpio, N8X0_TUSB_INT_GPIO)); - /* Using the NOR interface */ - omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_ASYNC_CS, - sysbus_mmio_get_region(dev, 0)); - omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_SYNC_CS, - sysbus_mmio_get_region(dev, 1)); - qdev_connect_gpio_out(s->mpu->gpio, N8X0_TUSB_ENABLE_GPIO, - qdev_get_gpio_in(s->usb, 0)); /* tusb_pwr */ -} - -/* Setup done before the main bootloader starts by some early setup code - * - used when we want to run the main bootloader in emulation. This - * isn't documented. */ -static const uint32_t n800_pinout[104] = { - 0x080f00d8, 0x00d40808, 0x03080808, 0x080800d0, - 0x00dc0808, 0x0b0f0f00, 0x080800b4, 0x00c00808, - 0x08080808, 0x180800c4, 0x00b80000, 0x08080808, - 0x080800bc, 0x00cc0808, 0x08081818, 0x18180128, - 0x01241800, 0x18181818, 0x000000f0, 0x01300000, - 0x00001b0b, 0x1b0f0138, 0x00e0181b, 0x1b031b0b, - 0x180f0078, 0x00740018, 0x0f0f0f1a, 0x00000080, - 0x007c0000, 0x00000000, 0x00000088, 0x00840000, - 0x00000000, 0x00000094, 0x00980300, 0x0f180003, - 0x0000008c, 0x00900f0f, 0x0f0f1b00, 0x0f00009c, - 0x01140000, 0x1b1b0f18, 0x0818013c, 0x01400008, - 0x00001818, 0x000b0110, 0x010c1800, 0x0b030b0f, - 0x181800f4, 0x00f81818, 0x00000018, 0x000000fc, - 0x00401808, 0x00000000, 0x0f1b0030, 0x003c0008, - 0x00000000, 0x00000038, 0x00340000, 0x00000000, - 0x1a080070, 0x00641a1a, 0x08080808, 0x08080060, - 0x005c0808, 0x08080808, 0x08080058, 0x00540808, - 0x08080808, 0x0808006c, 0x00680808, 0x08080808, - 0x000000a8, 0x00b00000, 0x08080808, 0x000000a0, - 0x00a40000, 0x00000000, 0x08ff0050, 0x004c0808, - 0xffffffff, 0xffff0048, 0x0044ffff, 0xffffffff, - 0x000000ac, 0x01040800, 0x08080b0f, 0x18180100, - 0x01081818, 0x0b0b1808, 0x1a0300e4, 0x012c0b1a, - 0x02020018, 0x0b000134, 0x011c0800, 0x0b1b1b00, - 0x0f0000c8, 0x00ec181b, 0x000f0f02, 0x00180118, - 0x01200000, 0x0f0b1b1b, 0x0f0200e8, 0x0000020b, -}; - -static void n800_setup_nolo_tags(void *sram_base) -{ - int i; - uint32_t *p = sram_base + 0x8000; - uint32_t *v = sram_base + 0xa000; - - memset(p, 0, 0x3000); - - strcpy((void *) (p + 0), "QEMU N800"); - - strcpy((void *) (p + 8), "F5"); - - stl_p(p + 10, 0x04f70000); - strcpy((void *) (p + 9), "RX-34"); - - /* RAM size in MB? */ - stl_p(p + 12, 0x80); - - /* Pointer to the list of tags */ - stl_p(p + 13, OMAP2_SRAM_BASE + 0x9000); - - /* The NOLO tags start here */ - p = sram_base + 0x9000; -#define ADD_TAG(tag, len) \ - stw_p((uint16_t *) p + 0, tag); \ - stw_p((uint16_t *) p + 1, len); p++; \ - stl_p(p++, OMAP2_SRAM_BASE | (((void *) v - sram_base) & 0xffff)); - - /* OMAP STI console? Pin out settings? */ - ADD_TAG(0x6e01, 414); - for (i = 0; i < ARRAY_SIZE(n800_pinout); i++) { - stl_p(v++, n800_pinout[i]); - } - - /* Kernel memsize? */ - ADD_TAG(0x6e05, 1); - stl_p(v++, 2); - - /* NOLO serial console */ - ADD_TAG(0x6e02, 4); - stl_p(v++, XLDR_LL_UART); /* UART number (1 - 3) */ - -#if 0 - /* CBUS settings (Retu/AVilma) */ - ADD_TAG(0x6e03, 6); - stw_p((uint16_t *) v + 0, 65); /* CBUS GPIO0 */ - stw_p((uint16_t *) v + 1, 66); /* CBUS GPIO1 */ - stw_p((uint16_t *) v + 2, 64); /* CBUS GPIO2 */ - v += 2; -#endif - - /* Nokia ASIC BB5 (Retu/Tahvo) */ - ADD_TAG(0x6e0a, 4); - stw_p((uint16_t *) v + 0, 111); /* "Retu" interrupt GPIO */ - stw_p((uint16_t *) v + 1, 108); /* "Tahvo" interrupt GPIO */ - v++; - - /* LCD console? */ - ADD_TAG(0x6e04, 4); - stw_p((uint16_t *) v + 0, 30); /* ??? */ - stw_p((uint16_t *) v + 1, 24); /* ??? */ - v++; - -#if 0 - /* LCD settings */ - ADD_TAG(0x6e06, 2); - stw_p((uint16_t *) (v++), 15); /* ??? */ -#endif - - /* I^2C (Menelaus) */ - ADD_TAG(0x6e07, 4); - stl_p(v++, 0x00720000); /* ??? */ - - /* Unknown */ - ADD_TAG(0x6e0b, 6); - stw_p((uint16_t *) v + 0, 94); /* ??? */ - stw_p((uint16_t *) v + 1, 23); /* ??? */ - stw_p((uint16_t *) v + 2, 0); /* ??? */ - v += 2; - - /* OMAP gpio switch info */ - ADD_TAG(0x6e0c, 80); - strcpy((void *) v, "bat_cover"); v += 3; - stw_p((uint16_t *) v + 0, 110); /* GPIO num ??? */ - stw_p((uint16_t *) v + 1, 1); /* GPIO num ??? */ - v += 2; - strcpy((void *) v, "cam_act"); v += 3; - stw_p((uint16_t *) v + 0, 95); /* GPIO num ??? */ - stw_p((uint16_t *) v + 1, 32); /* GPIO num ??? */ - v += 2; - strcpy((void *) v, "cam_turn"); v += 3; - stw_p((uint16_t *) v + 0, 12); /* GPIO num ??? */ - stw_p((uint16_t *) v + 1, 33); /* GPIO num ??? */ - v += 2; - strcpy((void *) v, "headphone"); v += 3; - stw_p((uint16_t *) v + 0, 107); /* GPIO num ??? */ - stw_p((uint16_t *) v + 1, 17); /* GPIO num ??? */ - v += 2; - - /* Bluetooth */ - ADD_TAG(0x6e0e, 12); - stl_p(v++, 0x5c623d01); /* ??? */ - stl_p(v++, 0x00000201); /* ??? */ - stl_p(v++, 0x00000000); /* ??? */ - - /* CX3110x WLAN settings */ - ADD_TAG(0x6e0f, 8); - stl_p(v++, 0x00610025); /* ??? */ - stl_p(v++, 0xffff0057); /* ??? */ - - /* MMC host settings */ - ADD_TAG(0x6e10, 12); - stl_p(v++, 0xffff000f); /* ??? */ - stl_p(v++, 0xffffffff); /* ??? */ - stl_p(v++, 0x00000060); /* ??? */ - - /* OneNAND chip select */ - ADD_TAG(0x6e11, 10); - stl_p(v++, 0x00000401); /* ??? */ - stl_p(v++, 0x0002003a); /* ??? */ - stl_p(v++, 0x00000002); /* ??? */ - - /* TEA5761 sensor settings */ - ADD_TAG(0x6e12, 2); - stl_p(v++, 93); /* GPIO num ??? */ - -#if 0 - /* Unknown tag */ - ADD_TAG(6e09, 0); - - /* Kernel UART / console */ - ADD_TAG(6e12, 0); -#endif - - /* End of the list */ - stl_p(p++, 0x00000000); - stl_p(p++, 0x00000000); -} - -/* This task is normally performed by the bootloader. If we're loading - * a kernel directly, we need to set up GPMC mappings ourselves. */ -static void n800_gpmc_init(struct n800_s *s) -{ - uint32_t config7 = - (0xf << 8) | /* MASKADDRESS */ - (1 << 6) | /* CSVALID */ - (4 << 0); /* BASEADDRESS */ - - cpu_physical_memory_write(0x6800a078, /* GPMC_CONFIG7_0 */ - &config7, sizeof(config7)); -} - -/* Setup sequence done by the bootloader */ -static void n8x0_boot_init(void *opaque) -{ - struct n800_s *s = (struct n800_s *) opaque; - uint32_t buf; - - /* PRCM setup */ -#define omap_writel(addr, val) \ - buf = (val); \ - cpu_physical_memory_write(addr, &buf, sizeof(buf)) - - omap_writel(0x48008060, 0x41); /* PRCM_CLKSRC_CTRL */ - omap_writel(0x48008070, 1); /* PRCM_CLKOUT_CTRL */ - omap_writel(0x48008078, 0); /* PRCM_CLKEMUL_CTRL */ - omap_writel(0x48008090, 0); /* PRCM_VOLTSETUP */ - omap_writel(0x48008094, 0); /* PRCM_CLKSSETUP */ - omap_writel(0x48008098, 0); /* PRCM_POLCTRL */ - omap_writel(0x48008140, 2); /* CM_CLKSEL_MPU */ - omap_writel(0x48008148, 0); /* CM_CLKSTCTRL_MPU */ - omap_writel(0x48008158, 1); /* RM_RSTST_MPU */ - omap_writel(0x480081c8, 0x15); /* PM_WKDEP_MPU */ - omap_writel(0x480081d4, 0x1d4); /* PM_EVGENCTRL_MPU */ - omap_writel(0x480081d8, 0); /* PM_EVEGENONTIM_MPU */ - omap_writel(0x480081dc, 0); /* PM_EVEGENOFFTIM_MPU */ - omap_writel(0x480081e0, 0xc); /* PM_PWSTCTRL_MPU */ - omap_writel(0x48008200, 0x047e7ff7); /* CM_FCLKEN1_CORE */ - omap_writel(0x48008204, 0x00000004); /* CM_FCLKEN2_CORE */ - omap_writel(0x48008210, 0x047e7ff1); /* CM_ICLKEN1_CORE */ - omap_writel(0x48008214, 0x00000004); /* CM_ICLKEN2_CORE */ - omap_writel(0x4800821c, 0x00000000); /* CM_ICLKEN4_CORE */ - omap_writel(0x48008230, 0); /* CM_AUTOIDLE1_CORE */ - omap_writel(0x48008234, 0); /* CM_AUTOIDLE2_CORE */ - omap_writel(0x48008238, 7); /* CM_AUTOIDLE3_CORE */ - omap_writel(0x4800823c, 0); /* CM_AUTOIDLE4_CORE */ - omap_writel(0x48008240, 0x04360626); /* CM_CLKSEL1_CORE */ - omap_writel(0x48008244, 0x00000014); /* CM_CLKSEL2_CORE */ - omap_writel(0x48008248, 0); /* CM_CLKSTCTRL_CORE */ - omap_writel(0x48008300, 0x00000000); /* CM_FCLKEN_GFX */ - omap_writel(0x48008310, 0x00000000); /* CM_ICLKEN_GFX */ - omap_writel(0x48008340, 0x00000001); /* CM_CLKSEL_GFX */ - omap_writel(0x48008400, 0x00000004); /* CM_FCLKEN_WKUP */ - omap_writel(0x48008410, 0x00000004); /* CM_ICLKEN_WKUP */ - omap_writel(0x48008440, 0x00000000); /* CM_CLKSEL_WKUP */ - omap_writel(0x48008500, 0x000000cf); /* CM_CLKEN_PLL */ - omap_writel(0x48008530, 0x0000000c); /* CM_AUTOIDLE_PLL */ - omap_writel(0x48008540, /* CM_CLKSEL1_PLL */ - (0x78 << 12) | (6 << 8)); - omap_writel(0x48008544, 2); /* CM_CLKSEL2_PLL */ - - /* GPMC setup */ - n800_gpmc_init(s); - - /* Video setup */ - n800_dss_init(&s->blizzard); - - /* CPU setup */ - s->mpu->cpu->env.GE = 0x5; - - /* If the machine has a slided keyboard, open it */ - if (s->kbd) { - qemu_irq_raise(qdev_get_gpio_in(s->mpu->gpio, N810_SLIDE_GPIO)); - } -} - -#define OMAP_TAG_NOKIA_BT 0x4e01 -#define OMAP_TAG_WLAN_CX3110X 0x4e02 -#define OMAP_TAG_CBUS 0x4e03 -#define OMAP_TAG_EM_ASIC_BB5 0x4e04 - -static const struct omap_gpiosw_info_s { - const char *name; - int line; - int type; -} n800_gpiosw_info[] = { - { - "bat_cover", N800_BAT_COVER_GPIO, - OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED, - }, { - "cam_act", N800_CAM_ACT_GPIO, - OMAP_GPIOSW_TYPE_ACTIVITY, - }, { - "cam_turn", N800_CAM_TURN_GPIO, - OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED, - }, { - "headphone", N8X0_HEADPHONE_GPIO, - OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED, - }, - { /* end of list */ } -}, n810_gpiosw_info[] = { - { - "gps_reset", N810_GPS_RESET_GPIO, - OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT, - }, { - "gps_wakeup", N810_GPS_WAKEUP_GPIO, - OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT, - }, { - "headphone", N8X0_HEADPHONE_GPIO, - OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED, - }, { - "kb_lock", N810_KB_LOCK_GPIO, - OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED, - }, { - "sleepx_led", N810_SLEEPX_LED_GPIO, - OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED | OMAP_GPIOSW_OUTPUT, - }, { - "slide", N810_SLIDE_GPIO, - OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED, - }, - { /* end of list */ } -}; - -static const struct omap_partition_info_s { - uint32_t offset; - uint32_t size; - int mask; - const char *name; -} n800_part_info[] = { - { 0x00000000, 0x00020000, 0x3, "bootloader" }, - { 0x00020000, 0x00060000, 0x0, "config" }, - { 0x00080000, 0x00200000, 0x0, "kernel" }, - { 0x00280000, 0x00200000, 0x3, "initfs" }, - { 0x00480000, 0x0fb80000, 0x3, "rootfs" }, - { /* end of list */ } -}, n810_part_info[] = { - { 0x00000000, 0x00020000, 0x3, "bootloader" }, - { 0x00020000, 0x00060000, 0x0, "config" }, - { 0x00080000, 0x00220000, 0x0, "kernel" }, - { 0x002a0000, 0x00400000, 0x0, "initfs" }, - { 0x006a0000, 0x0f960000, 0x0, "rootfs" }, - { /* end of list */ } -}; - -static const uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR }; - -static int n8x0_atag_setup(void *p, int model) -{ - uint8_t *b; - uint16_t *w; - uint32_t *l; - const struct omap_gpiosw_info_s *gpiosw; - const struct omap_partition_info_s *partition; - const char *tag; - - w = p; - - stw_p(w++, OMAP_TAG_UART); /* u16 tag */ - stw_p(w++, 4); /* u16 len */ - stw_p(w++, (1 << 2) | (1 << 1) | (1 << 0)); /* uint enabled_uarts */ - w++; - -#if 0 - stw_p(w++, OMAP_TAG_SERIAL_CONSOLE); /* u16 tag */ - stw_p(w++, 4); /* u16 len */ - stw_p(w++, XLDR_LL_UART + 1); /* u8 console_uart */ - stw_p(w++, 115200); /* u32 console_speed */ -#endif - - stw_p(w++, OMAP_TAG_LCD); /* u16 tag */ - stw_p(w++, 36); /* u16 len */ - strcpy((void *) w, "QEMU LCD panel"); /* char panel_name[16] */ - w += 8; - strcpy((void *) w, "blizzard"); /* char ctrl_name[16] */ - w += 8; - stw_p(w++, N810_BLIZZARD_RESET_GPIO); /* TODO: n800 s16 nreset_gpio */ - stw_p(w++, 24); /* u8 data_lines */ - - stw_p(w++, OMAP_TAG_CBUS); /* u16 tag */ - stw_p(w++, 8); /* u16 len */ - stw_p(w++, N8X0_CBUS_CLK_GPIO); /* s16 clk_gpio */ - stw_p(w++, N8X0_CBUS_DAT_GPIO); /* s16 dat_gpio */ - stw_p(w++, N8X0_CBUS_SEL_GPIO); /* s16 sel_gpio */ - w++; - - stw_p(w++, OMAP_TAG_EM_ASIC_BB5); /* u16 tag */ - stw_p(w++, 4); /* u16 len */ - stw_p(w++, N8X0_RETU_GPIO); /* s16 retu_irq_gpio */ - stw_p(w++, N8X0_TAHVO_GPIO); /* s16 tahvo_irq_gpio */ - - gpiosw = (model == 810) ? n810_gpiosw_info : n800_gpiosw_info; - for (; gpiosw->name; gpiosw++) { - stw_p(w++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */ - stw_p(w++, 20); /* u16 len */ - strcpy((void *) w, gpiosw->name); /* char name[12] */ - w += 6; - stw_p(w++, gpiosw->line); /* u16 gpio */ - stw_p(w++, gpiosw->type); - stw_p(w++, 0); - stw_p(w++, 0); - } - - stw_p(w++, OMAP_TAG_NOKIA_BT); /* u16 tag */ - stw_p(w++, 12); /* u16 len */ - b = (void *) w; - stb_p(b++, 0x01); /* u8 chip_type (CSR) */ - stb_p(b++, N8X0_BT_WKUP_GPIO); /* u8 bt_wakeup_gpio */ - stb_p(b++, N8X0_BT_HOST_WKUP_GPIO); /* u8 host_wakeup_gpio */ - stb_p(b++, N8X0_BT_RESET_GPIO); /* u8 reset_gpio */ - stb_p(b++, BT_UART + 1); /* u8 bt_uart */ - memcpy(b, &n8x0_bd_addr, 6); /* u8 bd_addr[6] */ - b += 6; - stb_p(b++, 0x02); /* u8 bt_sysclk (38.4) */ - w = (void *) b; - - stw_p(w++, OMAP_TAG_WLAN_CX3110X); /* u16 tag */ - stw_p(w++, 8); /* u16 len */ - stw_p(w++, 0x25); /* u8 chip_type */ - stw_p(w++, N8X0_WLAN_PWR_GPIO); /* s16 power_gpio */ - stw_p(w++, N8X0_WLAN_IRQ_GPIO); /* s16 irq_gpio */ - stw_p(w++, -1); /* s16 spi_cs_gpio */ - - stw_p(w++, OMAP_TAG_MMC); /* u16 tag */ - stw_p(w++, 16); /* u16 len */ - if (model == 810) { - stw_p(w++, 0x23f); /* unsigned flags */ - stw_p(w++, -1); /* s16 power_pin */ - stw_p(w++, -1); /* s16 switch_pin */ - stw_p(w++, -1); /* s16 wp_pin */ - stw_p(w++, 0x240); /* unsigned flags */ - stw_p(w++, 0xc000); /* s16 power_pin */ - stw_p(w++, 0x0248); /* s16 switch_pin */ - stw_p(w++, 0xc000); /* s16 wp_pin */ - } else { - stw_p(w++, 0xf); /* unsigned flags */ - stw_p(w++, -1); /* s16 power_pin */ - stw_p(w++, -1); /* s16 switch_pin */ - stw_p(w++, -1); /* s16 wp_pin */ - stw_p(w++, 0); /* unsigned flags */ - stw_p(w++, 0); /* s16 power_pin */ - stw_p(w++, 0); /* s16 switch_pin */ - stw_p(w++, 0); /* s16 wp_pin */ - } - - stw_p(w++, OMAP_TAG_TEA5761); /* u16 tag */ - stw_p(w++, 4); /* u16 len */ - stw_p(w++, N8X0_TEA5761_CS_GPIO); /* u16 enable_gpio */ - w++; - - partition = (model == 810) ? n810_part_info : n800_part_info; - for (; partition->name; partition++) { - stw_p(w++, OMAP_TAG_PARTITION); /* u16 tag */ - stw_p(w++, 28); /* u16 len */ - strcpy((void *) w, partition->name); /* char name[16] */ - l = (void *) (w + 8); - stl_p(l++, partition->size); /* unsigned int size */ - stl_p(l++, partition->offset); /* unsigned int offset */ - stl_p(l++, partition->mask); /* unsigned int mask_flags */ - w = (void *) l; - } - - stw_p(w++, OMAP_TAG_BOOT_REASON); /* u16 tag */ - stw_p(w++, 12); /* u16 len */ -#if 0 - strcpy((void *) w, "por"); /* char reason_str[12] */ - strcpy((void *) w, "charger"); /* char reason_str[12] */ - strcpy((void *) w, "32wd_to"); /* char reason_str[12] */ - strcpy((void *) w, "sw_rst"); /* char reason_str[12] */ - strcpy((void *) w, "mbus"); /* char reason_str[12] */ - strcpy((void *) w, "unknown"); /* char reason_str[12] */ - strcpy((void *) w, "swdg_to"); /* char reason_str[12] */ - strcpy((void *) w, "sec_vio"); /* char reason_str[12] */ - strcpy((void *) w, "pwr_key"); /* char reason_str[12] */ - strcpy((void *) w, "rtc_alarm"); /* char reason_str[12] */ -#else - strcpy((void *) w, "pwr_key"); /* char reason_str[12] */ -#endif - w += 6; - - tag = (model == 810) ? "RX-44" : "RX-34"; - stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */ - stw_p(w++, 24); /* u16 len */ - strcpy((void *) w, "product"); /* char component[12] */ - w += 6; - strcpy((void *) w, tag); /* char version[12] */ - w += 6; - - stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */ - stw_p(w++, 24); /* u16 len */ - strcpy((void *) w, "hw-build"); /* char component[12] */ - w += 6; - strcpy((void *) w, "QEMU "); - pstrcat((void *) w, 12, qemu_hw_version()); /* char version[12] */ - w += 6; - - tag = (model == 810) ? "1.1.10-qemu" : "1.1.6-qemu"; - stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */ - stw_p(w++, 24); /* u16 len */ - strcpy((void *) w, "nolo"); /* char component[12] */ - w += 6; - strcpy((void *) w, tag); /* char version[12] */ - w += 6; - - return (void *) w - p; -} - -static int n800_atag_setup(const struct arm_boot_info *info, void *p) -{ - return n8x0_atag_setup(p, 800); -} - -static int n810_atag_setup(const struct arm_boot_info *info, void *p) -{ - return n8x0_atag_setup(p, 810); -} - -static void n8x0_init(MachineState *machine, - struct arm_boot_info *binfo, int model) -{ - struct n800_s *s = g_malloc0(sizeof(*s)); - MachineClass *mc = MACHINE_GET_CLASS(machine); - - if (machine->ram_size != mc->default_ram_size) { - char *sz = size_to_str(mc->default_ram_size); - error_report("Invalid RAM size, should be %s", sz); - g_free(sz); - exit(EXIT_FAILURE); - } - binfo->ram_size = machine->ram_size; - - memory_region_add_subregion(get_system_memory(), OMAP2_Q2_BASE, - machine->ram); - - s->mpu = omap2420_mpu_init(machine->ram, machine->cpu_type); - - /* Setup peripherals - * - * Believed external peripherals layout in the N810: - * (spi bus 1) - * tsc2005 - * lcd_mipid - * (spi bus 2) - * Conexant cx3110x (WLAN) - * optional: pc2400m (WiMAX) - * (i2c bus 0) - * TLV320AIC33 (audio codec) - * TCM825x (camera by Toshiba) - * lp5521 (clever LEDs) - * tsl2563 (light sensor, hwmon, model 7, rev. 0) - * lm8323 (keypad, manf 00, rev 04) - * (i2c bus 1) - * tmp105 (temperature sensor, hwmon) - * menelaus (pm) - * (somewhere on i2c - maybe N800-only) - * tea5761 (FM tuner) - * (serial 0) - * GPS - * (some serial port) - * csr41814 (Bluetooth) - */ - n8x0_gpio_setup(s); - n8x0_nand_setup(s); - n8x0_i2c_setup(s); - if (model == 800) { - n800_tsc_kbd_setup(s); - } else if (model == 810) { - n810_tsc_setup(s); - n810_kbd_setup(s); - } - n8x0_spi_setup(s); - n8x0_dss_setup(s); - n8x0_cbus_setup(s); - n8x0_usb_setup(s); - - if (machine->kernel_filename) { - /* Or at the linux loader. */ - arm_load_kernel(s->mpu->cpu, machine, binfo); - - qemu_register_reset(n8x0_boot_init, s); - } - - if (option_rom[0].name && - (machine->boot_config.order[0] == 'n' || !machine->kernel_filename)) { - uint8_t *nolo_tags = g_new(uint8_t, 0x10000); - /* No, wait, better start at the ROM. */ - s->mpu->cpu->env.regs[15] = OMAP2_Q2_BASE + 0x400000; - - /* - * This is intended for loading the `secondary.bin' program from - * Nokia images (the NOLO bootloader). The entry point seems - * to be at OMAP2_Q2_BASE + 0x400000. - * - * The `2nd.bin' files contain some kind of earlier boot code and - * for them the entry point needs to be set to OMAP2_SRAM_BASE. - * - * The code above is for loading the `zImage' file from Nokia - * images. - */ - if (load_image_targphys(option_rom[0].name, - OMAP2_Q2_BASE + 0x400000, - machine->ram_size - 0x400000) < 0) { - error_report("Failed to load secondary bootloader %s", - option_rom[0].name); - exit(EXIT_FAILURE); - } - - n800_setup_nolo_tags(nolo_tags); - cpu_physical_memory_write(OMAP2_SRAM_BASE, nolo_tags, 0x10000); - g_free(nolo_tags); - } -} - -static struct arm_boot_info n800_binfo = { - .loader_start = OMAP2_Q2_BASE, - .board_id = 0x4f7, - .atag_board = n800_atag_setup, -}; - -static struct arm_boot_info n810_binfo = { - .loader_start = OMAP2_Q2_BASE, - /* 0x60c and 0x6bf (WiMAX Edition) have been assigned but are not - * used by some older versions of the bootloader and 5555 is used - * instead (including versions that shipped with many devices). */ - .board_id = 0x60c, - .atag_board = n810_atag_setup, -}; - -static void n800_init(MachineState *machine) -{ - n8x0_init(machine, &n800_binfo, 800); -} - -static void n810_init(MachineState *machine) -{ - n8x0_init(machine, &n810_binfo, 810); -} - -static void n800_class_init(ObjectClass *oc, void *data) -{ - MachineClass *mc = MACHINE_CLASS(oc); - - mc->desc = "Nokia N800 tablet aka. RX-34 (OMAP2420)"; - mc->init = n800_init; - mc->default_boot_order = ""; - mc->ignore_memory_transaction_failures = true; - mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm1136-r2"); - /* Actually two chips of 0x4000000 bytes each */ - mc->default_ram_size = 0x08000000; - mc->default_ram_id = "omap2.dram"; - mc->deprecation_reason = "machine is old and unmaintained"; - - machine_add_audiodev_property(mc); -} - -static const TypeInfo n800_type = { - .name = MACHINE_TYPE_NAME("n800"), - .parent = TYPE_MACHINE, - .class_init = n800_class_init, -}; - -static void n810_class_init(ObjectClass *oc, void *data) -{ - MachineClass *mc = MACHINE_CLASS(oc); - - mc->desc = "Nokia N810 tablet aka. RX-44 (OMAP2420)"; - mc->init = n810_init; - mc->default_boot_order = ""; - mc->ignore_memory_transaction_failures = true; - mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm1136-r2"); - /* Actually two chips of 0x4000000 bytes each */ - mc->default_ram_size = 0x08000000; - mc->default_ram_id = "omap2.dram"; - mc->deprecation_reason = "machine is old and unmaintained"; - - machine_add_audiodev_property(mc); -} - -static const TypeInfo n810_type = { - .name = MACHINE_TYPE_NAME("n810"), - .parent = TYPE_MACHINE, - .class_init = n810_class_init, -}; - -static void nseries_machine_init(void) -{ - type_register_static(&n800_type); - type_register_static(&n810_type); -} - -type_init(nseries_machine_init) |