diff options
Diffstat (limited to 'hw/arm/palm.c')
-rw-r--r-- | hw/arm/palm.c | 291 |
1 files changed, 291 insertions, 0 deletions
diff --git a/hw/arm/palm.c b/hw/arm/palm.c new file mode 100644 index 0000000000..91bc74af24 --- /dev/null +++ b/hw/arm/palm.c @@ -0,0 +1,291 @@ +/* + * PalmOne's (TM) PDAs. + * + * Copyright (C) 2006-2007 Andrzej Zaborowski <balrog@zabor.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 or + * (at your option) version 3 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ +#include "hw/hw.h" +#include "audio/audio.h" +#include "sysemu/sysemu.h" +#include "ui/console.h" +#include "hw/omap.h" +#include "hw/boards.h" +#include "hw/arm-misc.h" +#include "hw/devices.h" +#include "hw/loader.h" +#include "exec/address-spaces.h" + +static uint32_t static_readb(void *opaque, hwaddr offset) +{ + uint32_t *val = (uint32_t *) opaque; + return *val >> ((offset & 3) << 3); +} + +static uint32_t static_readh(void *opaque, hwaddr offset) +{ + uint32_t *val = (uint32_t *) opaque; + return *val >> ((offset & 1) << 3); +} + +static uint32_t static_readw(void *opaque, hwaddr offset) +{ + uint32_t *val = (uint32_t *) opaque; + return *val >> ((offset & 0) << 3); +} + +static void static_write(void *opaque, hwaddr offset, + uint32_t value) +{ +#ifdef SPY + printf("%s: value %08lx written at " PA_FMT "\n", + __FUNCTION__, value, offset); +#endif +} + +static const MemoryRegionOps static_ops = { + .old_mmio = { + .read = { static_readb, static_readh, static_readw, }, + .write = { static_write, static_write, static_write, }, + }, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +/* Palm Tunsgten|E support */ + +/* Shared GPIOs */ +#define PALMTE_USBDETECT_GPIO 0 +#define PALMTE_USB_OR_DC_GPIO 1 +#define PALMTE_TSC_GPIO 4 +#define PALMTE_PINTDAV_GPIO 6 +#define PALMTE_MMC_WP_GPIO 8 +#define PALMTE_MMC_POWER_GPIO 9 +#define PALMTE_HDQ_GPIO 11 +#define PALMTE_HEADPHONES_GPIO 14 +#define PALMTE_SPEAKER_GPIO 15 +/* MPU private GPIOs */ +#define PALMTE_DC_GPIO 2 +#define PALMTE_MMC_SWITCH_GPIO 4 +#define PALMTE_MMC1_GPIO 6 +#define PALMTE_MMC2_GPIO 7 +#define PALMTE_MMC3_GPIO 11 + +static MouseTransformInfo palmte_pointercal = { + .x = 320, + .y = 320, + .a = { -5909, 8, 22465308, 104, 7644, -1219972, 65536 }, +}; + +static void palmte_microwire_setup(struct omap_mpu_state_s *cpu) +{ + uWireSlave *tsc; + + tsc = tsc2102_init(qdev_get_gpio_in(cpu->gpio, PALMTE_PINTDAV_GPIO)); + + omap_uwire_attach(cpu->microwire, tsc, 0); + omap_mcbsp_i2s_attach(cpu->mcbsp1, tsc210x_codec(tsc)); + + tsc210x_set_transform(tsc, &palmte_pointercal); +} + +static struct { + int row; + int column; +} palmte_keymap[0x80] = { + [0 ... 0x7f] = { -1, -1 }, + [0x3b] = { 0, 0 }, /* F1 -> Calendar */ + [0x3c] = { 1, 0 }, /* F2 -> Contacts */ + [0x3d] = { 2, 0 }, /* F3 -> Tasks List */ + [0x3e] = { 3, 0 }, /* F4 -> Note Pad */ + [0x01] = { 4, 0 }, /* Esc -> Power */ + [0x4b] = { 0, 1 }, /* Left */ + [0x50] = { 1, 1 }, /* Down */ + [0x48] = { 2, 1 }, /* Up */ + [0x4d] = { 3, 1 }, /* Right */ + [0x4c] = { 4, 1 }, /* Centre */ + [0x39] = { 4, 1 }, /* Spc -> Centre */ +}; + +static void palmte_button_event(void *opaque, int keycode) +{ + struct omap_mpu_state_s *cpu = (struct omap_mpu_state_s *) opaque; + + if (palmte_keymap[keycode & 0x7f].row != -1) + omap_mpuio_key(cpu->mpuio, + palmte_keymap[keycode & 0x7f].row, + palmte_keymap[keycode & 0x7f].column, + !(keycode & 0x80)); +} + +static void palmte_onoff_gpios(void *opaque, int line, int level) +{ + switch (line) { + case 0: + printf("%s: current to MMC/SD card %sabled.\n", + __FUNCTION__, level ? "dis" : "en"); + break; + case 1: + printf("%s: internal speaker amplifier %s.\n", + __FUNCTION__, level ? "down" : "on"); + break; + + /* These LCD & Audio output signals have not been identified yet. */ + case 2: + case 3: + case 4: + printf("%s: LCD GPIO%i %s.\n", + __FUNCTION__, line - 1, level ? "high" : "low"); + break; + case 5: + case 6: + printf("%s: Audio GPIO%i %s.\n", + __FUNCTION__, line - 4, level ? "high" : "low"); + break; + } +} + +static void palmte_gpio_setup(struct omap_mpu_state_s *cpu) +{ + qemu_irq *misc_gpio; + + omap_mmc_handlers(cpu->mmc, + qdev_get_gpio_in(cpu->gpio, PALMTE_MMC_WP_GPIO), + qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio) + [PALMTE_MMC_SWITCH_GPIO])); + + misc_gpio = qemu_allocate_irqs(palmte_onoff_gpios, cpu, 7); + qdev_connect_gpio_out(cpu->gpio, PALMTE_MMC_POWER_GPIO, misc_gpio[0]); + qdev_connect_gpio_out(cpu->gpio, PALMTE_SPEAKER_GPIO, misc_gpio[1]); + qdev_connect_gpio_out(cpu->gpio, 11, misc_gpio[2]); + qdev_connect_gpio_out(cpu->gpio, 12, misc_gpio[3]); + qdev_connect_gpio_out(cpu->gpio, 13, misc_gpio[4]); + omap_mpuio_out_set(cpu->mpuio, 1, misc_gpio[5]); + omap_mpuio_out_set(cpu->mpuio, 3, misc_gpio[6]); + + /* Reset some inputs to initial state. */ + qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USBDETECT_GPIO)); + qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USB_OR_DC_GPIO)); + qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, 4)); + qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_HEADPHONES_GPIO)); + qemu_irq_lower(omap_mpuio_in_get(cpu->mpuio)[PALMTE_DC_GPIO]); + qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[6]); + qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[7]); + qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[11]); +} + +static struct arm_boot_info palmte_binfo = { + .loader_start = OMAP_EMIFF_BASE, + .ram_size = 0x02000000, + .board_id = 0x331, +}; + +static void palmte_init(QEMUMachineInitArgs *args) +{ + const char *cpu_model = args->cpu_model; + const char *kernel_filename = args->kernel_filename; + const char *kernel_cmdline = args->kernel_cmdline; + const char *initrd_filename = args->initrd_filename; + MemoryRegion *address_space_mem = get_system_memory(); + struct omap_mpu_state_s *mpu; + int flash_size = 0x00800000; + int sdram_size = palmte_binfo.ram_size; + static uint32_t cs0val = 0xffffffff; + static uint32_t cs1val = 0x0000e1a0; + static uint32_t cs2val = 0x0000e1a0; + static uint32_t cs3val = 0xe1a0e1a0; + int rom_size, rom_loaded = 0; + DisplayState *ds = get_displaystate(); + MemoryRegion *flash = g_new(MemoryRegion, 1); + MemoryRegion *cs = g_new(MemoryRegion, 4); + + mpu = omap310_mpu_init(address_space_mem, sdram_size, cpu_model); + + /* External Flash (EMIFS) */ + memory_region_init_ram(flash, "palmte.flash", flash_size); + vmstate_register_ram_global(flash); + memory_region_set_readonly(flash, true); + memory_region_add_subregion(address_space_mem, OMAP_CS0_BASE, flash); + + memory_region_init_io(&cs[0], &static_ops, &cs0val, "palmte-cs0", + OMAP_CS0_SIZE - flash_size); + memory_region_add_subregion(address_space_mem, OMAP_CS0_BASE + flash_size, + &cs[0]); + memory_region_init_io(&cs[1], &static_ops, &cs1val, "palmte-cs1", + OMAP_CS1_SIZE); + memory_region_add_subregion(address_space_mem, OMAP_CS1_BASE, &cs[1]); + memory_region_init_io(&cs[2], &static_ops, &cs2val, "palmte-cs2", + OMAP_CS2_SIZE); + memory_region_add_subregion(address_space_mem, OMAP_CS2_BASE, &cs[2]); + memory_region_init_io(&cs[3], &static_ops, &cs3val, "palmte-cs3", + OMAP_CS3_SIZE); + memory_region_add_subregion(address_space_mem, OMAP_CS3_BASE, &cs[3]); + + palmte_microwire_setup(mpu); + + qemu_add_kbd_event_handler(palmte_button_event, mpu); + + palmte_gpio_setup(mpu); + + /* Setup initial (reset) machine state */ + if (nb_option_roms) { + rom_size = get_image_size(option_rom[0].name); + if (rom_size > flash_size) { + fprintf(stderr, "%s: ROM image too big (%x > %x)\n", + __FUNCTION__, rom_size, flash_size); + rom_size = 0; + } + if (rom_size > 0) { + rom_size = load_image_targphys(option_rom[0].name, OMAP_CS0_BASE, + flash_size); + rom_loaded = 1; + } + if (rom_size < 0) { + fprintf(stderr, "%s: error loading '%s'\n", + __FUNCTION__, option_rom[0].name); + } + } + + if (!rom_loaded && !kernel_filename) { + fprintf(stderr, "Kernel or ROM image must be specified\n"); + exit(1); + } + + /* Load the kernel. */ + if (kernel_filename) { + palmte_binfo.kernel_filename = kernel_filename; + palmte_binfo.kernel_cmdline = kernel_cmdline; + palmte_binfo.initrd_filename = initrd_filename; + arm_load_kernel(mpu->cpu, &palmte_binfo); + } + + /* FIXME: We shouldn't really be doing this here. The LCD controller + will set the size once configured, so this just sets an initial + size until the guest activates the display. */ + ds->surface = qemu_resize_displaysurface(ds, 320, 320); + dpy_gfx_resize(ds); +} + +static QEMUMachine palmte_machine = { + .name = "cheetah", + .desc = "Palm Tungsten|E aka. Cheetah PDA (OMAP310)", + .init = palmte_init, + DEFAULT_MACHINE_OPTIONS, +}; + +static void palmte_machine_init(void) +{ + qemu_register_machine(&palmte_machine); +} + +machine_init(palmte_machine_init); |