aboutsummaryrefslogtreecommitdiff
path: root/hw/alpha_typhoon.c
diff options
context:
space:
mode:
Diffstat (limited to 'hw/alpha_typhoon.c')
-rw-r--r--hw/alpha_typhoon.c794
1 files changed, 794 insertions, 0 deletions
diff --git a/hw/alpha_typhoon.c b/hw/alpha_typhoon.c
new file mode 100644
index 0000000000..4c97219f8c
--- /dev/null
+++ b/hw/alpha_typhoon.c
@@ -0,0 +1,794 @@
+/*
+ * DEC 21272 (TSUNAMI/TYPHOON) chipset emulation.
+ *
+ * Written by Richard Henderson.
+ *
+ * This work is licensed under the GNU GPL license version 2 or later.
+ */
+
+#include "cpu.h"
+#include "exec-all.h"
+#include "hw.h"
+#include "devices.h"
+#include "sysemu.h"
+#include "alpha_sys.h"
+#include "exec-memory.h"
+
+
+typedef struct TyphoonCchip {
+ MemoryRegion region;
+ uint64_t misc;
+ uint64_t drir;
+ uint64_t dim[4];
+ uint32_t iic[4];
+ CPUState *cpu[4];
+} TyphoonCchip;
+
+typedef struct TyphoonWindow {
+ uint32_t base_addr;
+ uint32_t mask;
+ uint32_t translated_base_pfn;
+} TyphoonWindow;
+
+typedef struct TyphoonPchip {
+ MemoryRegion region;
+ MemoryRegion reg_iack;
+ MemoryRegion reg_mem;
+ MemoryRegion reg_io;
+ MemoryRegion reg_conf;
+ uint64_t ctl;
+ TyphoonWindow win[4];
+} TyphoonPchip;
+
+typedef struct TyphoonState {
+ PCIHostState host;
+ TyphoonCchip cchip;
+ TyphoonPchip pchip;
+ MemoryRegion dchip_region;
+ MemoryRegion ram_region;
+
+ /* QEMU emulation state. */
+ uint32_t latch_tmp;
+} TyphoonState;
+
+/* Called when one of DRIR or DIM changes. */
+static void cpu_irq_change(CPUState *env, uint64_t req)
+{
+ /* If there are any non-masked interrupts, tell the cpu. */
+ if (env) {
+ if (req) {
+ cpu_interrupt(env, CPU_INTERRUPT_HARD);
+ } else {
+ cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
+ }
+ }
+}
+
+static uint64_t cchip_read(void *opaque, target_phys_addr_t addr, unsigned size)
+{
+ CPUState *env = cpu_single_env;
+ TyphoonState *s = opaque;
+ uint64_t ret = 0;
+
+ if (addr & 4) {
+ return s->latch_tmp;
+ }
+
+ switch (addr) {
+ case 0x0000:
+ /* CSC: Cchip System Configuration Register. */
+ /* All sorts of data here; probably the only thing relevant is
+ PIP<14> Pchip 1 Present = 0. */
+ break;
+
+ case 0x0040:
+ /* MTR: Memory Timing Register. */
+ /* All sorts of stuff related to real DRAM. */
+ break;
+
+ case 0x0080:
+ /* MISC: Miscellaneous Register. */
+ ret = s->cchip.misc | (env->cpu_index & 3);
+ break;
+
+ case 0x00c0:
+ /* MPD: Memory Presence Detect Register. */
+ break;
+
+ case 0x0100: /* AAR0 */
+ case 0x0140: /* AAR1 */
+ case 0x0180: /* AAR2 */
+ case 0x01c0: /* AAR3 */
+ /* AAR: Array Address Register. */
+ /* All sorts of information about DRAM. */
+ break;
+
+ case 0x0200:
+ /* DIM0: Device Interrupt Mask Register, CPU0. */
+ ret = s->cchip.dim[0];
+ break;
+ case 0x0240:
+ /* DIM1: Device Interrupt Mask Register, CPU1. */
+ ret = s->cchip.dim[1];
+ break;
+ case 0x0280:
+ /* DIR0: Device Interrupt Request Register, CPU0. */
+ ret = s->cchip.dim[0] & s->cchip.drir;
+ break;
+ case 0x02c0:
+ /* DIR1: Device Interrupt Request Register, CPU1. */
+ ret = s->cchip.dim[1] & s->cchip.drir;
+ break;
+ case 0x0300:
+ /* DRIR: Device Raw Interrupt Request Register. */
+ ret = s->cchip.drir;
+ break;
+
+ case 0x0340:
+ /* PRBEN: Probe Enable Register. */
+ break;
+
+ case 0x0380:
+ /* IIC0: Interval Ignore Count Register, CPU0. */
+ ret = s->cchip.iic[0];
+ break;
+ case 0x03c0:
+ /* IIC1: Interval Ignore Count Register, CPU1. */
+ ret = s->cchip.iic[1];
+ break;
+
+ case 0x0400: /* MPR0 */
+ case 0x0440: /* MPR1 */
+ case 0x0480: /* MPR2 */
+ case 0x04c0: /* MPR3 */
+ /* MPR: Memory Programming Register. */
+ break;
+
+ case 0x0580:
+ /* TTR: TIGbus Timing Register. */
+ /* All sorts of stuff related to interrupt delivery timings. */
+ break;
+ case 0x05c0:
+ /* TDR: TIGbug Device Timing Register. */
+ break;
+
+ case 0x0600:
+ /* DIM2: Device Interrupt Mask Register, CPU2. */
+ ret = s->cchip.dim[2];
+ break;
+ case 0x0640:
+ /* DIM3: Device Interrupt Mask Register, CPU3. */
+ ret = s->cchip.dim[3];
+ break;
+ case 0x0680:
+ /* DIR2: Device Interrupt Request Register, CPU2. */
+ ret = s->cchip.dim[2] & s->cchip.drir;
+ break;
+ case 0x06c0:
+ /* DIR3: Device Interrupt Request Register, CPU3. */
+ ret = s->cchip.dim[3] & s->cchip.drir;
+ break;
+
+ case 0x0700:
+ /* IIC2: Interval Ignore Count Register, CPU2. */
+ ret = s->cchip.iic[2];
+ break;
+ case 0x0740:
+ /* IIC3: Interval Ignore Count Register, CPU3. */
+ ret = s->cchip.iic[3];
+ break;
+
+ case 0x0780:
+ /* PWR: Power Management Control. */
+ break;
+
+ case 0x0c00: /* CMONCTLA */
+ case 0x0c40: /* CMONCTLB */
+ case 0x0c80: /* CMONCNT01 */
+ case 0x0cc0: /* CMONCNT23 */
+ break;
+
+ default:
+ cpu_unassigned_access(cpu_single_env, addr, 0, 0, 0, size);
+ return -1;
+ }
+
+ s->latch_tmp = ret >> 32;
+ return ret;
+}
+
+static uint64_t dchip_read(void *opaque, target_phys_addr_t addr, unsigned size)
+{
+ /* Skip this. It's all related to DRAM timing and setup. */
+ return 0;
+}
+
+static uint64_t pchip_read(void *opaque, target_phys_addr_t addr, unsigned size)
+{
+ TyphoonState *s = opaque;
+ uint64_t ret = 0;
+
+ if (addr & 4) {
+ return s->latch_tmp;
+ }
+
+ switch (addr) {
+ case 0x0000:
+ /* WSBA0: Window Space Base Address Register. */
+ ret = s->pchip.win[0].base_addr;
+ break;
+ case 0x0040:
+ /* WSBA1 */
+ ret = s->pchip.win[1].base_addr;
+ break;
+ case 0x0080:
+ /* WSBA2 */
+ ret = s->pchip.win[2].base_addr;
+ break;
+ case 0x00c0:
+ /* WSBA3 */
+ ret = s->pchip.win[3].base_addr;
+ break;
+
+ case 0x0100:
+ /* WSM0: Window Space Mask Register. */
+ ret = s->pchip.win[0].mask;
+ break;
+ case 0x0140:
+ /* WSM1 */
+ ret = s->pchip.win[1].mask;
+ break;
+ case 0x0180:
+ /* WSM2 */
+ ret = s->pchip.win[2].mask;
+ break;
+ case 0x01c0:
+ /* WSM3 */
+ ret = s->pchip.win[3].mask;
+ break;
+
+ case 0x0200:
+ /* TBA0: Translated Base Address Register. */
+ ret = (uint64_t)s->pchip.win[0].translated_base_pfn << 10;
+ break;
+ case 0x0240:
+ /* TBA1 */
+ ret = (uint64_t)s->pchip.win[1].translated_base_pfn << 10;
+ break;
+ case 0x0280:
+ /* TBA2 */
+ ret = (uint64_t)s->pchip.win[2].translated_base_pfn << 10;
+ break;
+ case 0x02c0:
+ /* TBA3 */
+ ret = (uint64_t)s->pchip.win[3].translated_base_pfn << 10;
+ break;
+
+ case 0x0300:
+ /* PCTL: Pchip Control Register. */
+ ret = s->pchip.ctl;
+ break;
+ case 0x0340:
+ /* PLAT: Pchip Master Latency Register. */
+ break;
+ case 0x03c0:
+ /* PERROR: Pchip Error Register. */
+ break;
+ case 0x0400:
+ /* PERRMASK: Pchip Error Mask Register. */
+ break;
+ case 0x0440:
+ /* PERRSET: Pchip Error Set Register. */
+ break;
+ case 0x0480:
+ /* TLBIV: Translation Buffer Invalidate Virtual Register (WO). */
+ break;
+ case 0x04c0:
+ /* TLBIA: Translation Buffer Invalidate All Register (WO). */
+ break;
+ case 0x0500: /* PMONCTL */
+ case 0x0540: /* PMONCNT */
+ case 0x0800: /* SPRST */
+ break;
+
+ default:
+ cpu_unassigned_access(cpu_single_env, addr, 0, 0, 0, size);
+ return -1;
+ }
+
+ s->latch_tmp = ret >> 32;
+ return ret;
+}
+
+static void cchip_write(void *opaque, target_phys_addr_t addr,
+ uint64_t v32, unsigned size)
+{
+ TyphoonState *s = opaque;
+ uint64_t val, oldval, newval;
+
+ if (addr & 4) {
+ val = v32 << 32 | s->latch_tmp;
+ addr ^= 4;
+ } else {
+ s->latch_tmp = v32;
+ return;
+ }
+
+ switch (addr) {
+ case 0x0000:
+ /* CSC: Cchip System Configuration Register. */
+ /* All sorts of data here; nothing relevant RW. */
+ break;
+
+ case 0x0040:
+ /* MTR: Memory Timing Register. */
+ /* All sorts of stuff related to real DRAM. */
+ break;
+
+ case 0x0080:
+ /* MISC: Miscellaneous Register. */
+ newval = oldval = s->cchip.misc;
+ newval &= ~(val & 0x10000ff0); /* W1C fields */
+ if (val & 0x100000) {
+ newval &= ~0xff0000ull; /* ACL clears ABT and ABW */
+ } else {
+ newval |= val & 0x00f00000; /* ABT field is W1S */
+ if ((newval & 0xf0000) == 0) {
+ newval |= val & 0xf0000; /* ABW field is W1S iff zero */
+ }
+ }
+ newval |= (val & 0xf000) >> 4; /* IPREQ field sets IPINTR. */
+
+ newval &= ~0xf0000000000ull; /* WO and RW fields */
+ newval |= val & 0xf0000000000ull;
+ s->cchip.misc = newval;
+
+ /* Pass on changes to IPI and ITI state. */
+ if ((newval ^ oldval) & 0xff0) {
+ int i;
+ for (i = 0; i < 4; ++i) {
+ CPUState *env = s->cchip.cpu[i];
+ if (env) {
+ /* IPI can be either cleared or set by the write. */
+ if (newval & (1 << (i + 8))) {
+ cpu_interrupt(env, CPU_INTERRUPT_SMP);
+ } else {
+ cpu_reset_interrupt(env, CPU_INTERRUPT_SMP);
+ }
+
+ /* ITI can only be cleared by the write. */
+ if ((newval & (1 << (i + 4))) == 0) {
+ cpu_reset_interrupt(env, CPU_INTERRUPT_TIMER);
+ }
+ }
+ }
+ }
+ break;
+
+ case 0x00c0:
+ /* MPD: Memory Presence Detect Register. */
+ break;
+
+ case 0x0100: /* AAR0 */
+ case 0x0140: /* AAR1 */
+ case 0x0180: /* AAR2 */
+ case 0x01c0: /* AAR3 */
+ /* AAR: Array Address Register. */
+ /* All sorts of information about DRAM. */
+ break;
+
+ case 0x0200: /* DIM0 */
+ /* DIM: Device Interrupt Mask Register, CPU0. */
+ s->cchip.dim[0] = val;
+ cpu_irq_change(s->cchip.cpu[0], val & s->cchip.drir);
+ break;
+ case 0x0240: /* DIM1 */
+ /* DIM: Device Interrupt Mask Register, CPU1. */
+ s->cchip.dim[0] = val;
+ cpu_irq_change(s->cchip.cpu[1], val & s->cchip.drir);
+ break;
+
+ case 0x0280: /* DIR0 (RO) */
+ case 0x02c0: /* DIR1 (RO) */
+ case 0x0300: /* DRIR (RO) */
+ break;
+
+ case 0x0340:
+ /* PRBEN: Probe Enable Register. */
+ break;
+
+ case 0x0380: /* IIC0 */
+ s->cchip.iic[0] = val & 0xffffff;
+ break;
+ case 0x03c0: /* IIC1 */
+ s->cchip.iic[1] = val & 0xffffff;
+ break;
+
+ case 0x0400: /* MPR0 */
+ case 0x0440: /* MPR1 */
+ case 0x0480: /* MPR2 */
+ case 0x04c0: /* MPR3 */
+ /* MPR: Memory Programming Register. */
+ break;
+
+ case 0x0580:
+ /* TTR: TIGbus Timing Register. */
+ /* All sorts of stuff related to interrupt delivery timings. */
+ break;
+ case 0x05c0:
+ /* TDR: TIGbug Device Timing Register. */
+ break;
+
+ case 0x0600:
+ /* DIM2: Device Interrupt Mask Register, CPU2. */
+ s->cchip.dim[2] = val;
+ cpu_irq_change(s->cchip.cpu[2], val & s->cchip.drir);
+ break;
+ case 0x0640:
+ /* DIM3: Device Interrupt Mask Register, CPU3. */
+ s->cchip.dim[3] = val;
+ cpu_irq_change(s->cchip.cpu[3], val & s->cchip.drir);
+ break;
+
+ case 0x0680: /* DIR2 (RO) */
+ case 0x06c0: /* DIR3 (RO) */
+ break;
+
+ case 0x0700: /* IIC2 */
+ s->cchip.iic[2] = val & 0xffffff;
+ break;
+ case 0x0740: /* IIC3 */
+ s->cchip.iic[3] = val & 0xffffff;
+ break;
+
+ case 0x0780:
+ /* PWR: Power Management Control. */
+ break;
+
+ case 0x0c00: /* CMONCTLA */
+ case 0x0c40: /* CMONCTLB */
+ case 0x0c80: /* CMONCNT01 */
+ case 0x0cc0: /* CMONCNT23 */
+ break;
+
+ default:
+ cpu_unassigned_access(cpu_single_env, addr, 1, 0, 0, size);
+ return;
+ }
+}
+
+static void dchip_write(void *opaque, target_phys_addr_t addr,
+ uint64_t val, unsigned size)
+{
+ /* Skip this. It's all related to DRAM timing and setup. */
+}
+
+static void pchip_write(void *opaque, target_phys_addr_t addr,
+ uint64_t v32, unsigned size)
+{
+ TyphoonState *s = opaque;
+ uint64_t val, oldval;
+
+ if (addr & 4) {
+ val = v32 << 32 | s->latch_tmp;
+ addr ^= 4;
+ } else {
+ s->latch_tmp = v32;
+ return;
+ }
+
+ switch (addr) {
+ case 0x0000:
+ /* WSBA0: Window Space Base Address Register. */
+ s->pchip.win[0].base_addr = val;
+ break;
+ case 0x0040:
+ /* WSBA1 */
+ s->pchip.win[1].base_addr = val;
+ break;
+ case 0x0080:
+ /* WSBA2 */
+ s->pchip.win[2].base_addr = val;
+ break;
+ case 0x00c0:
+ /* WSBA3 */
+ s->pchip.win[3].base_addr = val;
+ break;
+
+ case 0x0100:
+ /* WSM0: Window Space Mask Register. */
+ s->pchip.win[0].mask = val;
+ break;
+ case 0x0140:
+ /* WSM1 */
+ s->pchip.win[1].mask = val;
+ break;
+ case 0x0180:
+ /* WSM2 */
+ s->pchip.win[2].mask = val;
+ break;
+ case 0x01c0:
+ /* WSM3 */
+ s->pchip.win[3].mask = val;
+ break;
+
+ case 0x0200:
+ /* TBA0: Translated Base Address Register. */
+ s->pchip.win[0].translated_base_pfn = val >> 10;
+ break;
+ case 0x0240:
+ /* TBA1 */
+ s->pchip.win[1].translated_base_pfn = val >> 10;
+ break;
+ case 0x0280:
+ /* TBA2 */
+ s->pchip.win[2].translated_base_pfn = val >> 10;
+ break;
+ case 0x02c0:
+ /* TBA3 */
+ s->pchip.win[3].translated_base_pfn = val >> 10;
+ break;
+
+ case 0x0300:
+ /* PCTL: Pchip Control Register. */
+ oldval = s->pchip.ctl;
+ oldval &= ~0x00001cff0fc7ffull; /* RW fields */
+ oldval |= val & 0x00001cff0fc7ffull;
+
+ s->pchip.ctl = oldval;
+ break;
+
+ case 0x0340:
+ /* PLAT: Pchip Master Latency Register. */
+ break;
+ case 0x03c0:
+ /* PERROR: Pchip Error Register. */
+ break;
+ case 0x0400:
+ /* PERRMASK: Pchip Error Mask Register. */
+ break;
+ case 0x0440:
+ /* PERRSET: Pchip Error Set Register. */
+ break;
+
+ case 0x0480:
+ /* TLBIV: Translation Buffer Invalidate Virtual Register. */
+ break;
+
+ case 0x04c0:
+ /* TLBIA: Translation Buffer Invalidate All Register (WO). */
+ break;
+
+ case 0x0500:
+ /* PMONCTL */
+ case 0x0540:
+ /* PMONCNT */
+ case 0x0800:
+ /* SPRST */
+ break;
+
+ default:
+ cpu_unassigned_access(cpu_single_env, addr, 1, 0, 0, size);
+ return;
+ }
+}
+
+static const MemoryRegionOps cchip_ops = {
+ .read = cchip_read,
+ .write = cchip_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4, /* ??? Should be 8. */
+ .max_access_size = 8,
+ },
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+};
+
+static const MemoryRegionOps dchip_ops = {
+ .read = dchip_read,
+ .write = dchip_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4, /* ??? Should be 8. */
+ .max_access_size = 8,
+ },
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 8,
+ },
+};
+
+static const MemoryRegionOps pchip_ops = {
+ .read = pchip_read,
+ .write = pchip_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4, /* ??? Should be 8. */
+ .max_access_size = 8,
+ },
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+};
+
+static void typhoon_set_irq(void *opaque, int irq, int level)
+{
+ TyphoonState *s = opaque;
+ uint64_t drir;
+ int i;
+
+ /* Set/Reset the bit in CCHIP.DRIR based on IRQ+LEVEL. */
+ drir = s->cchip.drir;
+ if (level) {
+ drir |= 1ull << irq;
+ } else {
+ drir &= ~(1ull << irq);
+ }
+ s->cchip.drir = drir;
+
+ for (i = 0; i < 4; ++i) {
+ cpu_irq_change(s->cchip.cpu[i], s->cchip.dim[i] & drir);
+ }
+}
+
+static void typhoon_set_isa_irq(void *opaque, int irq, int level)
+{
+ typhoon_set_irq(opaque, 55, level);
+}
+
+static void typhoon_set_timer_irq(void *opaque, int irq, int level)
+{
+ TyphoonState *s = opaque;
+ int i;
+
+ /* Thankfully, the mc146818rtc code doesn't track the IRQ state,
+ and so we don't have to worry about missing interrupts just
+ because we never actually ACK the interrupt. Just ignore any
+ case of the interrupt level going low. */
+ if (level == 0) {
+ return;
+ }
+
+ /* Deliver the interrupt to each CPU, considering each CPU's IIC. */
+ for (i = 0; i < 4; ++i) {
+ CPUState *env = s->cchip.cpu[i];
+ if (env) {
+ uint32_t iic = s->cchip.iic[i];
+
+ /* ??? The verbage in Section 10.2.2.10 isn't 100% clear.
+ Bit 24 is the OverFlow bit, RO, and set when the count
+ decrements past 0. When is OF cleared? My guess is that
+ OF is actually cleared when the IIC is written, and that
+ the ICNT field always decrements. At least, that's an
+ interpretation that makes sense, and "allows the CPU to
+ determine exactly how mant interval timer ticks were
+ skipped". At least within the next 4M ticks... */
+
+ iic = ((iic - 1) & 0x1ffffff) | (iic & 0x1000000);
+ s->cchip.iic[i] = iic;
+
+ if (iic & 0x1000000) {
+ /* Set the ITI bit for this cpu. */
+ s->cchip.misc |= 1 << (i + 4);
+ /* And signal the interrupt. */
+ cpu_interrupt(env, CPU_INTERRUPT_TIMER);
+ }
+ }
+ }
+}
+
+PCIBus *typhoon_init(ram_addr_t ram_size, qemu_irq *p_rtc_irq,
+ CPUState *cpus[4], pci_map_irq_fn sys_map_irq)
+{
+ const uint64_t MB = 1024 * 1024;
+ const uint64_t GB = 1024 * MB;
+ MemoryRegion *addr_space = get_system_memory();
+ MemoryRegion *addr_space_io = get_system_io();
+ DeviceState *dev;
+ PCIHostState *p;
+ TyphoonState *s;
+ PCIBus *b;
+
+ dev = qdev_create(NULL, "typhoon-pcihost");
+ qdev_init_nofail(dev);
+
+ p = FROM_SYSBUS(PCIHostState, sysbus_from_qdev(dev));
+ s = container_of(p, TyphoonState, host);
+
+ /* Remember the CPUs so that we can deliver interrupts to them. */
+ memcpy(s->cchip.cpu, cpus, 4 * sizeof(CPUState *));
+
+ *p_rtc_irq = *qemu_allocate_irqs(typhoon_set_timer_irq, s, 1);
+
+ /* Main memory region, 0x00.0000.0000. Real hardware supports 32GB,
+ but the address space hole reserved at this point is 8TB. */
+ memory_region_init_ram(&s->ram_region, NULL, "ram", ram_size);
+ memory_region_add_subregion(addr_space, 0, &s->ram_region);
+
+ /* TIGbus, 0x801.0000.0000, 1GB. */
+ /* ??? The TIGbus is used for delivering interrupts, and access to
+ the flash ROM. I'm not sure that we need to implement it at all. */
+
+ /* Pchip0 CSRs, 0x801.8000.0000, 256MB. */
+ memory_region_init_io(&s->pchip.region, &pchip_ops, s, "pchip0", 256*MB);
+ memory_region_add_subregion(addr_space, 0x80180000000, &s->pchip.region);
+
+ /* Cchip CSRs, 0x801.A000.0000, 256MB. */
+ memory_region_init_io(&s->cchip.region, &cchip_ops, s, "cchip0", 256*MB);
+ memory_region_add_subregion(addr_space, 0x801a0000000, &s->cchip.region);
+
+ /* Dchip CSRs, 0x801.B000.0000, 256MB. */
+ memory_region_init_io(&s->dchip_region, &dchip_ops, s, "dchip0", 256*MB);
+ memory_region_add_subregion(addr_space, 0x801b0000000, &s->dchip_region);
+
+ /* Pchip0 PCI memory, 0x800.0000.0000, 4GB. */
+ memory_region_init(&s->pchip.reg_mem, "pci0-mem", 4*GB);
+ memory_region_add_subregion(addr_space, 0x80000000000, &s->pchip.reg_mem);
+
+ /* Pchip0 PCI I/O, 0x801.FC00.0000, 32MB. */
+ /* ??? Ideally we drop the "system" i/o space on the floor and give the
+ PCI subsystem the full address space reserved by the chipset.
+ We can't do that until the MEM and IO paths in memory.c are unified. */
+ memory_region_init_io(&s->pchip.reg_io, &alpha_pci_bw_io_ops, NULL,
+ "pci0-io", 32*MB);
+ memory_region_add_subregion(addr_space, 0x801fc000000, &s->pchip.reg_io);
+
+ b = pci_register_bus(&s->host.busdev.qdev, "pci",
+ typhoon_set_irq, sys_map_irq, s,
+ &s->pchip.reg_mem, addr_space_io, 0, 64);
+ s->host.bus = b;
+
+ /* Pchip0 PCI special/interrupt acknowledge, 0x801.F800.0000, 64MB. */
+ memory_region_init_io(&s->pchip.reg_iack, &alpha_pci_iack_ops, b,
+ "pci0-iack", 64*MB);
+ memory_region_add_subregion(addr_space, 0x801f8000000, &s->pchip.reg_iack);
+
+ /* Pchip0 PCI configuration, 0x801.FE00.0000, 16MB. */
+ memory_region_init_io(&s->pchip.reg_conf, &alpha_pci_conf1_ops, b,
+ "pci0-conf", 16*MB);
+ memory_region_add_subregion(addr_space, 0x801fe000000, &s->pchip.reg_conf);
+
+ /* For the record, these are the mappings for the second PCI bus.
+ We can get away with not implementing them because we indicate
+ via the Cchip.CSC<PIP> bit that Pchip1 is not present. */
+ /* Pchip1 PCI memory, 0x802.0000.0000, 4GB. */
+ /* Pchip1 CSRs, 0x802.8000.0000, 256MB. */
+ /* Pchip1 PCI special/interrupt acknowledge, 0x802.F800.0000, 64MB. */
+ /* Pchip1 PCI I/O, 0x802.FC00.0000, 32MB. */
+ /* Pchip1 PCI configuration, 0x802.FE00.0000, 16MB. */
+
+ /* Init the ISA bus. */
+ /* ??? Technically there should be a cy82c693ub pci-isa bridge. */
+ {
+ qemu_irq isa_pci_irq, *isa_irqs;
+
+ isa_bus_new(NULL, addr_space_io);
+ isa_pci_irq = *qemu_allocate_irqs(typhoon_set_isa_irq, s, 1);
+ isa_irqs = i8259_init(isa_pci_irq);
+ isa_bus_irqs(isa_irqs);
+ }
+
+ return b;
+}
+
+static int typhoon_pcihost_init(SysBusDevice *dev)
+{
+ return 0;
+}
+
+static SysBusDeviceInfo typhoon_pcihost_info = {
+ .init = typhoon_pcihost_init,
+ .qdev.name = "typhoon-pcihost",
+ .qdev.size = sizeof(TyphoonState),
+ .qdev.no_user = 1
+};
+
+static void typhoon_register(void)
+{
+ sysbus_register_withprop(&typhoon_pcihost_info);
+}
+device_init(typhoon_register);
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 07:08:07 +0000