diff options
Diffstat (limited to 'hmp-commands.hx')
| -rw-r--r-- | hmp-commands.hx | 86 |
1 files changed, 43 insertions, 43 deletions
diff --git a/hmp-commands.hx b/hmp-commands.hx index e37bc8b010..81f276b209 100644 --- a/hmp-commands.hx +++ b/hmp-commands.hx @@ -28,7 +28,7 @@ ETEXI .args_type = "device:B", .params = "device|all", .help = "commit changes to the disk images (if -snapshot is used) or backing files", - .mhandler.cmd = do_commit, + .mhandler.cmd = hmp_commit, }, STEXI @@ -180,7 +180,7 @@ ETEXI .params = "device", .help = "remove host block device", .user_print = monitor_user_noop, - .mhandler.cmd_new = do_drive_del, + .mhandler.cmd_new = hmp_drive_del, }, STEXI @@ -245,7 +245,7 @@ ETEXI .args_type = "filename:F", .params = "filename", .help = "save screen into PPM image 'filename'", - .mhandler.cmd = hmp_screen_dump, + .mhandler.cmd = hmp_screendump, }, STEXI @@ -259,7 +259,7 @@ ETEXI .args_type = "filename:F", .params = "filename", .help = "output logs to 'filename'", - .mhandler.cmd = do_logfile, + .mhandler.cmd = hmp_logfile, }, STEXI @@ -273,7 +273,7 @@ ETEXI .args_type = "name:s,option:b", .params = "name on|off", .help = "changes status of a specific trace event", - .mhandler.cmd = do_trace_event_set_state, + .mhandler.cmd = hmp_trace_event, }, STEXI @@ -288,7 +288,7 @@ ETEXI .args_type = "op:s?,arg:F?", .params = "on|off|flush|set [arg]", .help = "open, close, or flush trace file, or set a new file name", - .mhandler.cmd = do_trace_file, + .mhandler.cmd = hmp_trace_file, }, STEXI @@ -303,7 +303,7 @@ ETEXI .args_type = "items:s", .params = "item1[,...]", .help = "activate logging of the specified items", - .mhandler.cmd = do_log, + .mhandler.cmd = hmp_log, }, STEXI @@ -317,7 +317,7 @@ ETEXI .args_type = "name:s?", .params = "[tag|id]", .help = "save a VM snapshot. If no tag or id are provided, a new snapshot is created", - .mhandler.cmd = do_savevm, + .mhandler.cmd = hmp_savevm, }, STEXI @@ -334,7 +334,7 @@ ETEXI .args_type = "name:s", .params = "tag|id", .help = "restore a VM snapshot from its tag or id", - .mhandler.cmd = do_loadvm, + .mhandler.cmd = hmp_loadvm, .command_completion = loadvm_completion, }, @@ -350,7 +350,7 @@ ETEXI .args_type = "name:s", .params = "tag|id", .help = "delete a VM snapshot from its tag or id", - .mhandler.cmd = do_delvm, + .mhandler.cmd = hmp_delvm, .command_completion = delvm_completion, }, @@ -365,7 +365,7 @@ ETEXI .args_type = "option:s?", .params = "[on|off]", .help = "run emulation in singlestep mode or switch to normal mode", - .mhandler.cmd = do_singlestep, + .mhandler.cmd = hmp_singlestep, }, STEXI @@ -422,7 +422,7 @@ ETEXI .args_type = "device:s?", .params = "[device]", .help = "start gdbserver on given device (default 'tcp::1234'), stop with 'none'", - .mhandler.cmd = do_gdbserver, + .mhandler.cmd = hmp_gdbserver, }, STEXI @@ -436,7 +436,7 @@ ETEXI .args_type = "fmt:/,addr:l", .params = "/fmt addr", .help = "virtual memory dump starting at 'addr'", - .mhandler.cmd = do_memory_dump, + .mhandler.cmd = hmp_memory_dump, }, STEXI @@ -450,7 +450,7 @@ ETEXI .args_type = "fmt:/,addr:l", .params = "/fmt addr", .help = "physical memory dump starting at 'addr'", - .mhandler.cmd = do_physical_memory_dump, + .mhandler.cmd = hmp_physical_memory_dump, }, STEXI @@ -533,7 +533,7 @@ ETEXI .args_type = "fmt:/,addr:i,index:i.", .params = "/fmt addr", .help = "I/O port read", - .mhandler.cmd = do_ioport_read, + .mhandler.cmd = hmp_ioport_read, }, STEXI @@ -545,7 +545,7 @@ ETEXI .args_type = "fmt:/,addr:i,val:i", .params = "/fmt addr value", .help = "I/O port write", - .mhandler.cmd = do_ioport_write, + .mhandler.cmd = hmp_ioport_write, }, STEXI @@ -557,7 +557,7 @@ ETEXI .args_type = "keys:s,hold-time:i?", .params = "keys [hold_ms]", .help = "send keys to the VM (e.g. 'sendkey ctrl-alt-f1', default hold time=100 ms)", - .mhandler.cmd = hmp_send_key, + .mhandler.cmd = hmp_sendkey, .command_completion = sendkey_completion, }, @@ -611,7 +611,7 @@ ETEXI .args_type = "start:i,size:i", .params = "addr size", .help = "compute the checksum of a memory region", - .mhandler.cmd = do_sum, + .mhandler.cmd = hmp_sum, }, STEXI @@ -626,7 +626,7 @@ ETEXI .args_type = "devname:s", .params = "device", .help = "add USB device (e.g. 'host:bus.addr' or 'host:vendor_id:product_id')", - .mhandler.cmd = do_usb_add, + .mhandler.cmd = hmp_usb_add, }, STEXI @@ -642,7 +642,7 @@ ETEXI .args_type = "devname:s", .params = "device", .help = "remove USB device 'bus.addr'", - .mhandler.cmd = do_usb_del, + .mhandler.cmd = hmp_usb_del, }, STEXI @@ -706,7 +706,7 @@ ETEXI .args_type = "dx_str:s,dy_str:s,dz_str:s?", .params = "dx dy [dz]", .help = "send mouse move events", - .mhandler.cmd = do_mouse_move, + .mhandler.cmd = hmp_mouse_move, }, STEXI @@ -721,7 +721,7 @@ ETEXI .args_type = "button_state:i", .params = "state", .help = "change mouse button state (1=L, 2=M, 4=R)", - .mhandler.cmd = do_mouse_button, + .mhandler.cmd = hmp_mouse_button, }, STEXI @@ -735,7 +735,7 @@ ETEXI .args_type = "index:i", .params = "index", .help = "set which mouse device receives events", - .mhandler.cmd = do_mouse_set, + .mhandler.cmd = hmp_mouse_set, }, STEXI @@ -753,7 +753,7 @@ ETEXI .args_type = "path:F,freq:i?,bits:i?,nchannels:i?", .params = "path [frequency [bits [channels]]]", .help = "capture audio to a wave file (default frequency=44100 bits=16 channels=2)", - .mhandler.cmd = do_wav_capture, + .mhandler.cmd = hmp_wavcapture, }, STEXI @item wavcapture @var{filename} [@var{frequency} [@var{bits} [@var{channels}]]] @@ -774,7 +774,7 @@ ETEXI .args_type = "n:i", .params = "capture index", .help = "stop capture", - .mhandler.cmd = do_stop_capture, + .mhandler.cmd = hmp_stopcapture, }, STEXI @item stopcapture @var{index} @@ -818,7 +818,7 @@ ETEXI .args_type = "bootdevice:s", .params = "bootdevice", .help = "define new values for the boot device list", - .mhandler.cmd = do_boot_set, + .mhandler.cmd = hmp_boot_set, }, STEXI @@ -837,7 +837,7 @@ ETEXI .args_type = "", .params = "", .help = "inject an NMI", - .mhandler.cmd = hmp_inject_nmi, + .mhandler.cmd = hmp_nmi, }, STEXI @item nmi @var{cpu} @@ -1140,7 +1140,7 @@ ETEXI "[,snapshot=on|off][,cache=on|off]\n" "[,readonly=on|off][,copy-on-read=on|off]", .help = "add drive to PCI storage controller", - .mhandler.cmd = drive_hot_add, + .mhandler.cmd = hmp_drive_add, }, STEXI @@ -1155,7 +1155,7 @@ ETEXI .args_type = "pci_addr:s,type:s,opts:s?", .params = "auto|[[<domain>:]<bus>:]<slot> nic|storage [[vlan=n][,macaddr=addr][,model=type]] [file=file][,if=type][,bus=nr]...", .help = "hot-add PCI device", - .mhandler.cmd = pci_device_hot_add, + .mhandler.cmd = hmp_pci_add, }, #endif @@ -1171,7 +1171,7 @@ ETEXI .args_type = "pci_addr:s", .params = "[[<domain>:]<bus>:]<slot>", .help = "hot remove PCI device", - .mhandler.cmd = do_pci_device_hot_remove, + .mhandler.cmd = hmp_pci_del, }, #endif @@ -1197,7 +1197,7 @@ ETEXI "<tlb header> = 32bit x 4\n\t\t\t" "<tlb header prefix> = 32bit x 4", .user_print = pcie_aer_inject_error_print, - .mhandler.cmd_new = do_pcie_aer_inject_error, + .mhandler.cmd_new = hmp_pcie_aer_inject_error, }, STEXI @@ -1211,7 +1211,7 @@ ETEXI .args_type = "device:s,opts:s?", .params = "tap|user|socket|vde|netmap|bridge|vhost-user|dump [options]", .help = "add host VLAN client", - .mhandler.cmd = net_host_device_add, + .mhandler.cmd = hmp_host_net_add, .command_completion = host_net_add_completion, }, @@ -1226,7 +1226,7 @@ ETEXI .args_type = "vlan_id:i,device:s", .params = "vlan_id name", .help = "remove host VLAN client", - .mhandler.cmd = net_host_device_remove, + .mhandler.cmd = hmp_host_net_remove, .command_completion = host_net_remove_completion, }, @@ -1302,7 +1302,7 @@ ETEXI .args_type = "arg1:s,arg2:s?,arg3:s?", .params = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport", .help = "redirect TCP or UDP connections from host to guest (requires -net user)", - .mhandler.cmd = net_slirp_hostfwd_add, + .mhandler.cmd = hmp_hostfwd_add, }, #endif STEXI @@ -1317,7 +1317,7 @@ ETEXI .args_type = "arg1:s,arg2:s?,arg3:s?", .params = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport", .help = "remove host-to-guest TCP or UDP redirection", - .mhandler.cmd = net_slirp_hostfwd_remove, + .mhandler.cmd = hmp_hostfwd_remove, }, #endif @@ -1361,7 +1361,7 @@ ETEXI .args_type = "action:s", .params = "[reset|shutdown|poweroff|pause|debug|none]", .help = "change watchdog action", - .mhandler.cmd = do_watchdog_action, + .mhandler.cmd = hmp_watchdog_action, .command_completion = watchdog_action_completion, }, @@ -1376,7 +1376,7 @@ ETEXI .args_type = "aclname:s", .params = "aclname", .help = "list rules in the access control list", - .mhandler.cmd = do_acl_show, + .mhandler.cmd = hmp_acl_show, }, STEXI @@ -1393,7 +1393,7 @@ ETEXI .args_type = "aclname:s,policy:s", .params = "aclname allow|deny", .help = "set default access control list policy", - .mhandler.cmd = do_acl_policy, + .mhandler.cmd = hmp_acl_policy, }, STEXI @@ -1409,7 +1409,7 @@ ETEXI .args_type = "aclname:s,match:s,policy:s,index:i?", .params = "aclname match allow|deny [index]", .help = "add a match rule to the access control list", - .mhandler.cmd = do_acl_add, + .mhandler.cmd = hmp_acl_add, }, STEXI @@ -1428,7 +1428,7 @@ ETEXI .args_type = "aclname:s,match:s", .params = "aclname match", .help = "remove a match rule from the access control list", - .mhandler.cmd = do_acl_remove, + .mhandler.cmd = hmp_acl_remove, }, STEXI @@ -1442,7 +1442,7 @@ ETEXI .args_type = "aclname:s", .params = "aclname", .help = "reset the access control list", - .mhandler.cmd = do_acl_reset, + .mhandler.cmd = hmp_acl_reset, }, STEXI @@ -1504,7 +1504,7 @@ ETEXI .args_type = "broadcast:-b,cpu_index:i,bank:i,status:l,mcg_status:l,addr:l,misc:l", .params = "[-b] cpu bank status mcgstatus addr misc", .help = "inject a MCE on the given CPU [and broadcast to other CPUs with -b option]", - .mhandler.cmd = do_inject_mce, + .mhandler.cmd = hmp_mce, }, #endif @@ -1694,7 +1694,7 @@ ETEXI .args_type = "item:s?", .params = "[subcommand]", .help = "show various information about the system state", - .mhandler.cmd = do_info_help, + .mhandler.cmd = hmp_info_help, .sub_table = info_cmds, }, |