diff options
Diffstat (limited to 'hmp-commands.hx')
| -rw-r--r-- | hmp-commands.hx | 821 |
1 files changed, 0 insertions, 821 deletions
diff --git a/hmp-commands.hx b/hmp-commands.hx index 9aa59f5231..eb3d1605fd 100644 --- a/hmp-commands.hx +++ b/hmp-commands.hx @@ -5,9 +5,6 @@ HXCOMM DEF(command, args, callback, arg_string, help) is used to construct HXCOMM monitor commands HXCOMM HXCOMM can be used for comments, discarded from both texi and C -STEXI -@table @option -ETEXI { .name = "help|?", @@ -18,11 +15,6 @@ ETEXI .flags = "p", }, -STEXI -@item help or ? [@var{cmd}] -@findex help -Show the help for all commands or just for command @var{cmd}. -ETEXI SRST ``help`` or ``?`` [*cmd*] Show the help for all commands or just for command *cmd*. @@ -36,16 +28,6 @@ ERST .cmd = hmp_commit, }, -STEXI -@item commit -@findex commit -Commit changes to the disk images (if -snapshot is used) or backing files. -If the backing file is smaller than the snapshot, then the backing file will be -resized to be the same size as the snapshot. If the snapshot is smaller than -the backing file, the backing file will not be truncated. If you want the -backing file to match the size of the smaller snapshot, you can safely truncate -it yourself once the commit operation successfully completes. -ETEXI SRST ``commit`` Commit changes to the disk images (if -snapshot is used) or backing files. @@ -65,11 +47,6 @@ ERST .cmd = hmp_quit, }, -STEXI -@item q or quit -@findex quit -Quit the emulator. -ETEXI SRST ``q`` or ``quit`` Quit the emulator. @@ -84,15 +61,6 @@ ERST .flags = "p", }, -STEXI -@item exit_preconfig -@findex exit_preconfig -This command makes QEMU exit the preconfig state and proceed with -VM initialization using configuration data provided on the command line -and via the QMP monitor during the preconfig state. The command is only -available during the preconfig state (i.e. when the --preconfig command -line option was in use). -ETEXI SRST ``exit_preconfig`` This command makes QEMU exit the preconfig state and proceed with @@ -110,14 +78,6 @@ ERST .cmd = hmp_block_resize, }, -STEXI -@item block_resize -@findex block_resize -Resize a block image while a guest is running. Usually requires guest -action to see the updated size. Resize to a lower size is supported, -but should be used with extreme caution. Note that this command only -resizes image files, it can not resize block devices like LVM volumes. -ETEXI SRST ``block_resize`` Resize a block image while a guest is running. Usually requires guest @@ -134,11 +94,6 @@ ERST .cmd = hmp_block_stream, }, -STEXI -@item block_stream -@findex block_stream -Copy data from a backing file into a block device. -ETEXI SRST ``block_stream`` Copy data from a backing file into a block device. @@ -152,11 +107,6 @@ ERST .cmd = hmp_block_job_set_speed, }, -STEXI -@item block_job_set_speed -@findex block_job_set_speed -Set maximum speed for a background block operation. -ETEXI SRST ``block_job_set_speed`` Set maximum speed for a background block operation. @@ -172,11 +122,6 @@ ERST .cmd = hmp_block_job_cancel, }, -STEXI -@item block_job_cancel -@findex block_job_cancel -Stop an active background block operation (streaming, mirroring). -ETEXI SRST ``block_job_cancel`` Stop an active background block operation (streaming, mirroring). @@ -190,12 +135,6 @@ ERST .cmd = hmp_block_job_complete, }, -STEXI -@item block_job_complete -@findex block_job_complete -Manually trigger completion of an active background block operation. -For mirroring, this will switch the device to the destination path. -ETEXI SRST ``block_job_complete`` Manually trigger completion of an active background block operation. @@ -210,11 +149,6 @@ ERST .cmd = hmp_block_job_pause, }, -STEXI -@item block_job_pause -@findex block_job_pause -Pause an active block streaming operation. -ETEXI SRST ``block_job_pause`` Pause an active block streaming operation. @@ -228,11 +162,6 @@ ERST .cmd = hmp_block_job_resume, }, -STEXI -@item block_job_resume -@findex block_job_resume -Resume a paused block streaming operation. -ETEXI SRST ``block_job_resume`` Resume a paused block streaming operation. @@ -246,11 +175,6 @@ ERST .cmd = hmp_eject, }, -STEXI -@item eject [-f] @var{device} -@findex eject -Eject a removable medium (use -f to force it). -ETEXI SRST ``eject [-f]`` *device* Eject a removable medium (use -f to force it). @@ -264,16 +188,6 @@ ERST .cmd = hmp_drive_del, }, -STEXI -@item drive_del @var{device} -@findex drive_del -Remove host block device. The result is that guest generated IO is no longer -submitted against the host device underlying the disk. Once a drive has -been deleted, the QEMU Block layer returns -EIO which results in IO -errors in the guest for applications that are reading/writing to the device. -These errors are always reported to the guest, regardless of the drive's error -actions (drive options rerror, werror). -ETEXI SRST ``drive_del`` *device* Remove host block device. The result is that guest generated IO is no longer @@ -292,56 +206,6 @@ ERST .cmd = hmp_change, }, -STEXI -@item change @var{device} @var{setting} -@findex change -Change the configuration of a device. - -@table @option -@item change @var{diskdevice} @var{filename} [@var{format} [@var{read-only-mode}]] -Change the medium for a removable disk device to point to @var{filename}. eg - -@example -(qemu) change ide1-cd0 /path/to/some.iso -@end example - -@var{format} is optional. - -@var{read-only-mode} may be used to change the read-only status of the device. -It accepts the following values: - -@table @var -@item retain -Retains the current status; this is the default. - -@item read-only -Makes the device read-only. - -@item read-write -Makes the device writable. -@end table - -@item change vnc @var{display},@var{options} -Change the configuration of the VNC server. The valid syntax for @var{display} -and @var{options} are described at @ref{sec_invocation}. eg - -@example -(qemu) change vnc localhost:1 -@end example - -@item change vnc password [@var{password}] - -Change the password associated with the VNC server. If the new password is not -supplied, the monitor will prompt for it to be entered. VNC passwords are only -significant up to 8 letters. eg - -@example -(qemu) change vnc password -Password: ******** -@end example - -@end table -ETEXI SRST ``change`` *device* *setting* Change the configuration of a device. @@ -391,11 +255,6 @@ ERST .cmd = hmp_screendump, }, -STEXI -@item screendump @var{filename} -@findex screendump -Save screen into PPM image @var{filename}. -ETEXI SRST ``screendump`` *filename* Save screen into PPM image *filename*. @@ -409,11 +268,6 @@ ERST .cmd = hmp_logfile, }, -STEXI -@item logfile @var{filename} -@findex logfile -Output logs to @var{filename}. -ETEXI SRST ``logfile`` *filename* Output logs to *filename*. @@ -429,11 +283,6 @@ ERST .command_completion = trace_event_completion, }, -STEXI -@item trace-event -@findex trace-event -changes status of a trace event -ETEXI SRST ``trace-event`` changes status of a trace event @@ -448,11 +297,6 @@ ERST .cmd = hmp_trace_file, }, -STEXI -@item trace-file on|off|flush -@findex trace-file -Open, close, or flush the trace file. If no argument is given, the status of the trace file is displayed. -ETEXI SRST ``trace-file on|off|flush`` Open, close, or flush the trace file. If no argument is given, the @@ -468,11 +312,6 @@ ERST .cmd = hmp_log, }, -STEXI -@item log @var{item1}[,...] -@findex log -Activate logging of the specified items. -ETEXI SRST ``log`` *item1*\ [,...] Activate logging of the specified items. @@ -486,17 +325,6 @@ ERST .cmd = hmp_savevm, }, -STEXI -@item savevm @var{tag} -@findex savevm -Create a snapshot of the whole virtual machine. If @var{tag} is -provided, it is used as human readable identifier. If there is already -a snapshot with the same tag, it is replaced. More info at -@ref{vm_snapshots}. - -Since 4.0, savevm stopped allowing the snapshot id to be set, accepting -only @var{tag} as parameter. -ETEXI SRST ``savevm`` *tag* Create a snapshot of the whole virtual machine. If *tag* is @@ -517,14 +345,6 @@ ERST .command_completion = loadvm_completion, }, -STEXI -@item loadvm @var{tag} -@findex loadvm -Set the whole virtual machine to the snapshot identified by the tag -@var{tag}. - -Since 4.0, loadvm stopped accepting snapshot id as parameter. -ETEXI SRST ``loadvm`` *tag* Set the whole virtual machine to the snapshot identified by the tag @@ -542,14 +362,6 @@ ERST .command_completion = delvm_completion, }, -STEXI -@item delvm @var{tag} -@findex delvm -Delete the snapshot identified by @var{tag}. - -Since 4.0, delvm stopped deleting snapshots by snapshot id, accepting -only @var{tag} as parameter. -ETEXI SRST ``delvm`` *tag* Delete the snapshot identified by *tag*. @@ -566,12 +378,6 @@ ERST .cmd = hmp_singlestep, }, -STEXI -@item singlestep [off] -@findex singlestep -Run the emulation in single step mode. -If called with option off, the emulation returns to normal mode. -ETEXI SRST ``singlestep [off]`` Run the emulation in single step mode. @@ -586,11 +392,6 @@ ERST .cmd = hmp_stop, }, -STEXI -@item stop -@findex stop -Stop emulation. -ETEXI SRST ``stop`` Stop emulation. @@ -604,11 +405,6 @@ ERST .cmd = hmp_cont, }, -STEXI -@item c or cont -@findex cont -Resume emulation. -ETEXI SRST ``c`` or ``cont`` Resume emulation. @@ -622,11 +418,6 @@ ERST .cmd = hmp_system_wakeup, }, -STEXI -@item system_wakeup -@findex system_wakeup -Wakeup guest from suspend. -ETEXI SRST ``system_wakeup`` Wakeup guest from suspend. @@ -640,11 +431,6 @@ ERST .cmd = hmp_gdbserver, }, -STEXI -@item gdbserver [@var{port}] -@findex gdbserver -Start gdbserver session (default @var{port}=1234) -ETEXI SRST ``gdbserver`` [*port*] Start gdbserver session (default *port*\=1234) @@ -658,11 +444,6 @@ ERST .cmd = hmp_memory_dump, }, -STEXI -@item x/fmt @var{addr} -@findex x -Virtual memory dump starting at @var{addr}. -ETEXI SRST ``x/``\ *fmt* *addr* Virtual memory dump starting at *addr*. @@ -676,64 +457,6 @@ ERST .cmd = hmp_physical_memory_dump, }, -STEXI -@item xp /@var{fmt} @var{addr} -@findex xp -Physical memory dump starting at @var{addr}. - -@var{fmt} is a format which tells the command how to format the -data. Its syntax is: @option{/@{count@}@{format@}@{size@}} - -@table @var -@item count -is the number of items to be dumped. - -@item format -can be x (hex), d (signed decimal), u (unsigned decimal), o (octal), -c (char) or i (asm instruction). - -@item size -can be b (8 bits), h (16 bits), w (32 bits) or g (64 bits). On x86, -@code{h} or @code{w} can be specified with the @code{i} format to -respectively select 16 or 32 bit code instruction size. - -@end table - -Examples: -@itemize -@item -Dump 10 instructions at the current instruction pointer: -@example -(qemu) x/10i $eip -0x90107063: ret -0x90107064: sti -0x90107065: lea 0x0(%esi,1),%esi -0x90107069: lea 0x0(%edi,1),%edi -0x90107070: ret -0x90107071: jmp 0x90107080 -0x90107073: nop -0x90107074: nop -0x90107075: nop -0x90107076: nop -@end example - -@item -Dump 80 16 bit values at the start of the video memory. -@smallexample -(qemu) xp/80hx 0xb8000 -0x000b8000: 0x0b50 0x0b6c 0x0b65 0x0b78 0x0b38 0x0b36 0x0b2f 0x0b42 -0x000b8010: 0x0b6f 0x0b63 0x0b68 0x0b73 0x0b20 0x0b56 0x0b47 0x0b41 -0x000b8020: 0x0b42 0x0b69 0x0b6f 0x0b73 0x0b20 0x0b63 0x0b75 0x0b72 -0x000b8030: 0x0b72 0x0b65 0x0b6e 0x0b74 0x0b2d 0x0b63 0x0b76 0x0b73 -0x000b8040: 0x0b20 0x0b30 0x0b35 0x0b20 0x0b4e 0x0b6f 0x0b76 0x0b20 -0x000b8050: 0x0b32 0x0b30 0x0b30 0x0b33 0x0720 0x0720 0x0720 0x0720 -0x000b8060: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 -0x000b8070: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 -0x000b8080: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 -0x000b8090: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 -@end smallexample -@end itemize -ETEXI SRST ``xp /``\ *fmt* *addr* Physical memory dump starting at *addr*. @@ -791,12 +514,6 @@ ERST .cmd = hmp_gpa2hva, }, -STEXI -@item gpa2hva @var{addr} -@findex gpa2hva -Print the host virtual address at which the guest's physical address @var{addr} -is mapped. -ETEXI SRST ``gpa2hva`` *addr* Print the host virtual address at which the guest's physical address *addr* @@ -813,12 +530,6 @@ ERST }, #endif -STEXI -@item gpa2hpa @var{addr} -@findex gpa2hpa -Print the host physical address at which the guest's physical address @var{addr} -is mapped. -ETEXI SRST ``gpa2hpa`` *addr* Print the host physical address at which the guest's physical address *addr* @@ -833,12 +544,6 @@ ERST .cmd = hmp_gva2gpa, }, -STEXI -@item gva2gpa @var{addr} -@findex gva2gpa -Print the guest physical address at which the guest's virtual address @var{addr} -is mapped based on the mapping for the current CPU. -ETEXI SRST ``gva2gpa`` *addr* Print the guest physical address at which the guest's virtual address *addr* @@ -853,12 +558,6 @@ ERST .cmd = do_print, }, -STEXI -@item p or print/@var{fmt} @var{expr} -@findex print -Print expression value. Only the @var{format} part of @var{fmt} is -used. -ETEXI SRST ``p`` or ``print/``\ *fmt* *expr* Print expression value. Only the *format* part of *fmt* is @@ -873,11 +572,6 @@ ERST .cmd = hmp_ioport_read, }, -STEXI -@item i/@var{fmt} @var{addr} [.@var{index}] -@findex i -Read I/O port. -ETEXI SRST ``i/``\ *fmt* *addr* [.\ *index*\ ] Read I/O port. @@ -891,11 +585,6 @@ ERST .cmd = hmp_ioport_write, }, -STEXI -@item o/@var{fmt} @var{addr} @var{val} -@findex o -Write to I/O port. -ETEXI SRST ``o/``\ *fmt* *addr* *val* Write to I/O port. @@ -910,19 +599,6 @@ ERST .command_completion = sendkey_completion, }, -STEXI -@item sendkey @var{keys} -@findex sendkey -Send @var{keys} to the guest. @var{keys} could be the name of the -key or the raw value in hexadecimal format. Use @code{-} to press -several keys simultaneously. Example: -@example -sendkey ctrl-alt-f1 -@end example - -This command is useful to send keys that your graphical user interface -intercepts at low level, such as @code{ctrl-alt-f1} in X Window. -ETEXI SRST ``sendkey`` *keys* Send *keys* to the guest. *keys* could be the name of the @@ -943,12 +619,6 @@ ERST .cmd = hmp_sync_profile, }, -STEXI -@item sync-profile [on|off|reset] -@findex sync-profile -Enable, disable or reset synchronization profiling. With no arguments, prints -whether profiling is on or off. -ETEXI SRST ``sync-profile [on|off|reset]`` Enable, disable or reset synchronization profiling. With no arguments, prints @@ -963,11 +633,6 @@ ERST .cmd = hmp_system_reset, }, -STEXI -@item system_reset -@findex system_reset -Reset the system. -ETEXI SRST ``system_reset`` Reset the system. @@ -981,11 +646,6 @@ ERST .cmd = hmp_system_powerdown, }, -STEXI -@item system_powerdown -@findex system_powerdown -Power down the system (if supported). -ETEXI SRST ``system_powerdown`` Power down the system (if supported). @@ -999,11 +659,6 @@ ERST .cmd = hmp_sum, }, -STEXI -@item sum @var{addr} @var{size} -@findex sum -Compute the checksum of a memory region. -ETEXI SRST ``sum`` *addr* *size* Compute the checksum of a memory region. @@ -1018,11 +673,6 @@ ERST .command_completion = device_add_completion, }, -STEXI -@item device_add @var{config} -@findex device_add -Add device. -ETEXI SRST ``device_add`` *config* Add device. @@ -1037,12 +687,6 @@ ERST .command_completion = device_del_completion, }, -STEXI -@item device_del @var{id} -@findex device_del -Remove device @var{id}. @var{id} may be a short ID -or a QOM object path. -ETEXI SRST ``device_del`` *id* Remove device *id*. *id* may be a short ID @@ -1057,11 +701,6 @@ ERST .cmd = hmp_cpu, }, -STEXI -@item cpu @var{index} -@findex cpu -Set the default CPU. -ETEXI SRST ``cpu`` *index* Set the default CPU. @@ -1075,12 +714,6 @@ ERST .cmd = hmp_mouse_move, }, -STEXI -@item mouse_move @var{dx} @var{dy} [@var{dz}] -@findex mouse_move -Move the active mouse to the specified coordinates @var{dx} @var{dy} -with optional scroll axis @var{dz}. -ETEXI SRST ``mouse_move`` *dx* *dy* [*dz*] Move the active mouse to the specified coordinates *dx* *dy* @@ -1095,11 +728,6 @@ ERST .cmd = hmp_mouse_button, }, -STEXI -@item mouse_button @var{val} -@findex mouse_button -Change the active mouse button state @var{val} (1=L, 2=M, 4=R). -ETEXI SRST ``mouse_button`` *val* Change the active mouse button state *val* (1=L, 2=M, 4=R). @@ -1113,15 +741,6 @@ ERST .cmd = hmp_mouse_set, }, -STEXI -@item mouse_set @var{index} -@findex mouse_set -Set which mouse device receives events at given @var{index}, index -can be obtained with -@example -info mice -@end example -ETEXI SRST ``mouse_set`` *index* Set which mouse device receives events at given *index*, index @@ -1138,20 +757,6 @@ ERST .help = "capture audio to a wave file (default frequency=44100 bits=16 channels=2)", .cmd = hmp_wavcapture, }, -STEXI -@item wavcapture @var{filename} @var{audiodev} [@var{frequency} [@var{bits} [@var{channels}]]] -@findex wavcapture -Capture audio into @var{filename} from @var{audiodev}, using sample rate -@var{frequency} bits per sample @var{bits} and number of channels -@var{channels}. - -Defaults: -@itemize @minus -@item Sample rate = 44100 Hz - CD quality -@item Bits = 16 -@item Number of channels = 2 - Stereo -@end itemize -ETEXI SRST ``wavcapture`` *filename* *audiodev* [*frequency* [*bits* [*channels*]]] Capture audio into *filename* from *audiodev*, using sample rate @@ -1172,14 +777,6 @@ ERST .help = "stop capture", .cmd = hmp_stopcapture, }, -STEXI -@item stopcapture @var{index} -@findex stopcapture -Stop capture with a given @var{index}, index can be obtained with -@example -info capture -@end example -ETEXI SRST ``stopcapture`` *index* Stop capture with a given *index*, index can be obtained with:: @@ -1196,11 +793,6 @@ ERST .cmd = hmp_memsave, }, -STEXI -@item memsave @var{addr} @var{size} @var{file} -@findex memsave -save to disk virtual memory dump starting at @var{addr} of size @var{size}. -ETEXI SRST ``memsave`` *addr* *size* *file* save to disk virtual memory dump starting at *addr* of size *size*. @@ -1214,11 +806,6 @@ ERST .cmd = hmp_pmemsave, }, -STEXI -@item pmemsave @var{addr} @var{size} @var{file} -@findex pmemsave -save to disk physical memory dump starting at @var{addr} of size @var{size}. -ETEXI SRST ``pmemsave`` *addr* *size* *file* save to disk physical memory dump starting at *addr* of size *size*. @@ -1232,15 +819,6 @@ ERST .cmd = hmp_boot_set, }, -STEXI -@item boot_set @var{bootdevicelist} -@findex boot_set -Define new values for the boot device list. Those values will override -the values specified on the command line through the @code{-boot} option. - -The values that can be specified here depend on the machine type, but are -the same that can be specified in the @code{-boot} command line option. -ETEXI SRST ``boot_set`` *bootdevicelist* Define new values for the boot device list. Those values will override @@ -1257,12 +835,6 @@ ERST .help = "inject an NMI", .cmd = hmp_nmi, }, -STEXI -@item nmi @var{cpu} -@findex nmi -Inject an NMI on the default CPU (x86/s390) or all CPUs (ppc64). - -ETEXI SRST ``nmi`` *cpu* Inject an NMI on the default CPU (x86/s390) or all CPUs (ppc64). @@ -1277,13 +849,6 @@ ERST .command_completion = ringbuf_write_completion, }, -STEXI -@item ringbuf_write @var{device} @var{data} -@findex ringbuf_write -Write @var{data} to ring buffer character device @var{device}. -@var{data} must be a UTF-8 string. - -ETEXI SRST ``ringbuf_write`` *device* *data* Write *data* to ring buffer character device *device*. @@ -1299,18 +864,6 @@ ERST .command_completion = ringbuf_write_completion, }, -STEXI -@item ringbuf_read @var{device} -@findex ringbuf_read -Read and print up to @var{size} bytes from ring buffer character -device @var{device}. -Certain non-printable characters are printed \uXXXX, where XXXX is the -character code in hexadecimal. Character \ is printed \\. -Bug: can screw up when the buffer contains invalid UTF-8 sequences, -NUL characters, after the ring buffer lost data, and when reading -stops because the size limit is reached. - -ETEXI SRST ``ringbuf_read`` *device* Read and print up to *size* bytes from ring buffer character @@ -1330,16 +883,6 @@ ERST .cmd = hmp_announce_self, }, -STEXI -@item announce_self -@findex announce_self -Trigger a round of GARP/RARP broadcasts; this is useful for explicitly updating the -network infrastructure after a reconfiguration or some forms of migration. -The timings of the round are set by the migration announce parameters. -An optional comma separated @var{interfaces} list restricts the announce to the -named set of interfaces. An optional @var{id} can be used to start a separate announce -timer and to change the parameters of it later. -ETEXI SRST ``announce_self`` Trigger a round of GARP/RARP broadcasts; this is useful for explicitly @@ -1364,13 +907,6 @@ ERST }, -STEXI -@item migrate [-d] [-b] [-i] @var{uri} -@findex migrate -Migrate to @var{uri} (using -d to not wait for completion). - -b for migration with full copy of disk - -i for migration with incremental copy of disk (base image is shared) -ETEXI SRST ``migrate [-d] [-b] [-i]`` *uri* Migrate to *uri* (using -d to not wait for completion). @@ -1389,11 +925,6 @@ ERST .cmd = hmp_migrate_cancel, }, -STEXI -@item migrate_cancel -@findex migrate_cancel -Cancel the current VM migration. -ETEXI SRST ``migrate_cancel`` Cancel the current VM migration. @@ -1406,11 +937,6 @@ ERST .help = "Continue migration from the given paused state", .cmd = hmp_migrate_continue, }, -STEXI -@item migrate_continue @var{state} -@findex migrate_continue -Continue migration from the paused state @var{state} -ETEXI SRST ``migrate_continue`` *state* Continue migration from the paused state *state* @@ -1424,12 +950,6 @@ ERST .cmd = hmp_migrate_incoming, }, -STEXI -@item migrate_incoming @var{uri} -@findex migrate_incoming -Continue an incoming migration using the @var{uri} (that has the same syntax -as the -incoming option). -ETEXI SRST ``migrate_incoming`` *uri* Continue an incoming migration using the *uri* (that has the same syntax @@ -1444,11 +964,6 @@ ERST .cmd = hmp_migrate_recover, }, -STEXI -@item migrate_recover @var{uri} -@findex migrate_recover -Continue a paused incoming postcopy migration using the @var{uri}. -ETEXI SRST ``migrate_recover`` *uri* Continue a paused incoming postcopy migration using the *uri*. @@ -1462,11 +977,6 @@ ERST .cmd = hmp_migrate_pause, }, -STEXI -@item migrate_pause -@findex migrate_pause -Pause an ongoing migration. Currently it only supports postcopy. -ETEXI SRST ``migrate_pause`` Pause an ongoing migration. Currently it only supports postcopy. @@ -1485,11 +995,6 @@ ERST .cmd = hmp_migrate_set_cache_size, }, -STEXI -@item migrate_set_cache_size @var{value} -@findex migrate_set_cache_size -Set cache size to @var{value} (in bytes) for xbzrle migrations. -ETEXI SRST ``migrate_set_cache_size`` *value* Set cache size to *value* (in bytes) for xbzrle migrations. @@ -1504,11 +1009,6 @@ ERST .cmd = hmp_migrate_set_speed, }, -STEXI -@item migrate_set_speed @var{value} -@findex migrate_set_speed -Set maximum speed to @var{value} (in bytes) for migrations. -ETEXI SRST ``migrate_set_speed`` *value* Set maximum speed to *value* (in bytes) for migrations. @@ -1522,11 +1022,6 @@ ERST .cmd = hmp_migrate_set_downtime, }, -STEXI -@item migrate_set_downtime @var{second} -@findex migrate_set_downtime -Set maximum tolerated downtime (in seconds) for migration. -ETEXI SRST ``migrate_set_downtime`` *second* Set maximum tolerated downtime (in seconds) for migration. @@ -1541,11 +1036,6 @@ ERST .command_completion = migrate_set_capability_completion, }, -STEXI -@item migrate_set_capability @var{capability} @var{state} -@findex migrate_set_capability -Enable/Disable the usage of a capability @var{capability} for migration. -ETEXI SRST ``migrate_set_capability`` *capability* *state* Enable/Disable the usage of a capability *capability* for migration. @@ -1560,11 +1050,6 @@ ERST .command_completion = migrate_set_parameter_completion, }, -STEXI -@item migrate_set_parameter @var{parameter} @var{value} -@findex migrate_set_parameter -Set the parameter @var{parameter} for migration. -ETEXI SRST ``migrate_set_parameter`` *parameter* *value* Set the parameter *parameter* for migration. @@ -1581,12 +1066,6 @@ ERST .cmd = hmp_migrate_start_postcopy, }, -STEXI -@item migrate_start_postcopy -@findex migrate_start_postcopy -Switch in-progress migration to postcopy mode. Ignored after the end of -migration (or once already in postcopy). -ETEXI SRST ``migrate_start_postcopy`` Switch in-progress migration to postcopy mode. Ignored after the end of @@ -1602,11 +1081,6 @@ ERST .cmd = hmp_x_colo_lost_heartbeat, }, -STEXI -@item x_colo_lost_heartbeat -@findex x_colo_lost_heartbeat -Tell COLO that heartbeat is lost, a failover or takeover is needed. -ETEXI SRST ``x_colo_lost_heartbeat`` Tell COLO that heartbeat is lost, a failover or takeover is needed. @@ -1620,13 +1094,6 @@ ERST .cmd = hmp_client_migrate_info, }, -STEXI -@item client_migrate_info @var{protocol} @var{hostname} @var{port} @var{tls-port} @var{cert-subject} -@findex client_migrate_info -Set migration information for remote display. This makes the server -ask the client to automatically reconnect using the new parameters -once migration finished successfully. Only implemented for SPICE. -ETEXI SRST ``client_migrate_info`` *protocol* *hostname* *port* *tls-port* *cert-subject* Set migration information for remote display. This makes the server @@ -1651,24 +1118,6 @@ ERST .cmd = hmp_dump_guest_memory, }, -STEXI -@item dump-guest-memory [-p] @var{filename} @var{begin} @var{length} -@item dump-guest-memory [-z|-l|-s|-w] @var{filename} -@findex dump-guest-memory -Dump guest memory to @var{protocol}. The file can be processed with crash or -gdb. Without -z|-l|-s|-w, the dump format is ELF. - -p: do paging to get guest's memory mapping. - -z: dump in kdump-compressed format, with zlib compression. - -l: dump in kdump-compressed format, with lzo compression. - -s: dump in kdump-compressed format, with snappy compression. - -w: dump in Windows crashdump format (can be used instead of ELF-dump converting), - for Windows x64 guests with vmcoreinfo driver only - filename: dump file name. - begin: the starting physical address. It's optional, and should be - specified together with length. - length: the memory size, in bytes. It's optional, and should be specified - together with begin. -ETEXI SRST ``dump-guest-memory [-p]`` *filename* *begin* *length* \ @@ -1708,11 +1157,6 @@ ERST }, #endif -STEXI -@item dump-skeys @var{filename} -@findex dump-skeys -Save guest storage keys to a file. -ETEXI SRST ``dump-skeys`` *filename* Save guest storage keys to a file. @@ -1728,11 +1172,6 @@ ERST }, #endif -STEXI -@item migration_mode @var{mode} -@findex migration_mode -Enables or disables migration mode. -ETEXI SRST ``migration_mode`` *mode* Enables or disables migration mode. @@ -1753,11 +1192,6 @@ ERST .cmd = hmp_snapshot_blkdev, }, -STEXI -@item snapshot_blkdev -@findex snapshot_blkdev -Snapshot device, using snapshot file as target if provided -ETEXI SRST ``snapshot_blkdev`` Snapshot device, using snapshot file as target if provided @@ -1773,11 +1207,6 @@ ERST .cmd = hmp_snapshot_blkdev_internal, }, -STEXI -@item snapshot_blkdev_internal -@findex snapshot_blkdev_internal -Take an internal snapshot on device if it support -ETEXI SRST ``snapshot_blkdev_internal`` Take an internal snapshot on device if it support @@ -1795,11 +1224,6 @@ ERST .cmd = hmp_snapshot_delete_blkdev_internal, }, -STEXI -@item snapshot_delete_blkdev_internal -@findex snapshot_delete_blkdev_internal -Delete an internal snapshot on device if it support -ETEXI SRST ``snapshot_delete_blkdev_internal`` Delete an internal snapshot on device if it support @@ -1819,12 +1243,6 @@ ERST "so that the result does not need a backing file.\n\t\t\t", .cmd = hmp_drive_mirror, }, -STEXI -@item drive_mirror -@findex drive_mirror -Start mirroring a block device's writes to a new destination, -using the specified target. -ETEXI SRST ``drive_mirror`` Start mirroring a block device's writes to a new destination, @@ -1847,11 +1265,6 @@ ERST "(if the target format supports it).\n\t\t\t", .cmd = hmp_drive_backup, }, -STEXI -@item drive_backup -@findex drive_backup -Start a point-in-time copy of a block device to a specificed target. -ETEXI SRST ``drive_backup`` Start a point-in-time copy of a block device to a specificed target. @@ -1869,11 +1282,6 @@ ERST .cmd = hmp_drive_add, }, -STEXI -@item drive_add -@findex drive_add -Add drive to PCI storage controller. -ETEXI SRST ``drive_add`` Add drive to PCI storage controller. @@ -1897,11 +1305,6 @@ ERST .cmd = hmp_pcie_aer_inject_error, }, -STEXI -@item pcie_aer_inject_error -@findex pcie_aer_inject_error -Inject PCIe AER error -ETEXI SRST ``pcie_aer_inject_error`` Inject PCIe AER error @@ -1916,11 +1319,6 @@ ERST .command_completion = netdev_add_completion, }, -STEXI -@item netdev_add -@findex netdev_add -Add host network device. -ETEXI SRST ``netdev_add`` Add host network device. @@ -1935,11 +1333,6 @@ ERST .command_completion = netdev_del_completion, }, -STEXI -@item netdev_del -@findex netdev_del -Remove host network device. -ETEXI SRST ``netdev_del`` Remove host network device. @@ -1954,11 +1347,6 @@ ERST .command_completion = object_add_completion, }, -STEXI -@item object_add -@findex object_add -Create QOM object. -ETEXI SRST ``object_add`` Create QOM object. @@ -1973,11 +1361,6 @@ ERST .command_completion = object_del_completion, }, -STEXI -@item object_del -@findex object_del -Destroy QOM object. -ETEXI SRST ``object_del`` Destroy QOM object. @@ -1992,11 +1375,6 @@ ERST .cmd = hmp_hostfwd_add, }, #endif -STEXI -@item hostfwd_add -@findex hostfwd_add -Redirect TCP or UDP connections from host to guest (requires -net user). -ETEXI SRST ``hostfwd_add`` Redirect TCP or UDP connections from host to guest (requires -net user). @@ -2012,11 +1390,6 @@ ERST }, #endif -STEXI -@item hostfwd_remove -@findex hostfwd_remove -Remove host-to-guest TCP or UDP redirection. -ETEXI SRST ``hostfwd_remove`` Remove host-to-guest TCP or UDP redirection. @@ -2030,11 +1403,6 @@ ERST .cmd = hmp_balloon, }, -STEXI -@item balloon @var{value} -@findex balloon -Request VM to change its memory allocation to @var{value} (in MB). -ETEXI SRST ``balloon`` *value* Request VM to change its memory allocation to *value* (in MB). @@ -2049,11 +1417,6 @@ ERST .command_completion = set_link_completion, }, -STEXI -@item set_link @var{name} [on|off] -@findex set_link -Switch link @var{name} on (i.e. up) or off (i.e. down). -ETEXI SRST ``set_link`` *name* ``[on|off]`` Switch link *name* on (i.e. up) or off (i.e. down). @@ -2068,11 +1431,6 @@ ERST .command_completion = watchdog_action_completion, }, -STEXI -@item watchdog_action -@findex watchdog_action -Change watchdog action. -ETEXI SRST ``watchdog_action`` Change watchdog action. @@ -2086,14 +1444,6 @@ ERST .cmd = hmp_acl_show, }, -STEXI -@item acl_show @var{aclname} -@findex acl_show -List all the matching rules in the access control list, and the default -policy. There are currently two named access control lists, -@var{vnc.x509dname} and @var{vnc.username} matching on the x509 client -certificate distinguished name, and SASL username respectively. -ETEXI SRST ``acl_show`` *aclname* List all the matching rules in the access control list, and the default @@ -2110,13 +1460,6 @@ ERST .cmd = hmp_acl_policy, }, -STEXI -@item acl_policy @var{aclname} @code{allow|deny} -@findex acl_policy -Set the default access control list policy, used in the event that -none of the explicit rules match. The default policy at startup is -always @code{deny}. -ETEXI SRST ``acl_policy`` *aclname* ``allow|deny`` Set the default access control list policy, used in the event that @@ -2132,16 +1475,6 @@ ERST .cmd = hmp_acl_add, }, -STEXI -@item acl_add @var{aclname} @var{match} @code{allow|deny} [@var{index}] -@findex acl_add -Add a match rule to the access control list, allowing or denying access. -The match will normally be an exact username or x509 distinguished name, -but can optionally include wildcard globs. eg @code{*@@EXAMPLE.COM} to -allow all users in the @code{EXAMPLE.COM} kerberos realm. The match will -normally be appended to the end of the ACL, but can be inserted -earlier in the list if the optional @var{index} parameter is supplied. -ETEXI SRST ``acl_add`` *aclname* *match* ``allow|deny`` [*index*] Add a match rule to the access control list, allowing or denying access. @@ -2160,11 +1493,6 @@ ERST .cmd = hmp_acl_remove, }, -STEXI -@item acl_remove @var{aclname} @var{match} -@findex acl_remove -Remove the specified match rule from the access control list. -ETEXI SRST ``acl_remove`` *aclname* *match* Remove the specified match rule from the access control list. @@ -2178,12 +1506,6 @@ ERST .cmd = hmp_acl_reset, }, -STEXI -@item acl_reset @var{aclname} -@findex acl_reset -Remove all matches from the access control list, and set the default -policy back to @code{deny}. -ETEXI SRST ``acl_reset`` *aclname* Remove all matches from the access control list, and set the default @@ -2197,14 +1519,6 @@ ERST .help = "serve block devices on the given host and port", .cmd = hmp_nbd_server_start, }, -STEXI -@item nbd_server_start @var{host}:@var{port} -@findex nbd_server_start -Start an NBD server on the given host and/or port. If the @option{-a} -option is included, all of the virtual machine's block devices that -have an inserted media on them are automatically exported; in this case, -the @option{-w} option makes the devices writable too. -ETEXI SRST ``nbd_server_start`` *host*:*port* Start an NBD server on the given host and/or port. If the ``-a`` @@ -2220,14 +1534,6 @@ ERST .help = "export a block device via NBD", .cmd = hmp_nbd_server_add, }, -STEXI -@item nbd_server_add @var{device} [ @var{name} ] -@findex nbd_server_add -Export a block device through QEMU's NBD server, which must be started -beforehand with @command{nbd_server_start}. The @option{-w} option makes the -exported device writable too. The export name is controlled by @var{name}, -defaulting to @var{device}. -ETEXI SRST ``nbd_server_add`` *device* [ *name* ] Export a block device through QEMU's NBD server, which must be started @@ -2243,15 +1549,6 @@ ERST .help = "remove an export previously exposed via NBD", .cmd = hmp_nbd_server_remove, }, -STEXI -@item nbd_server_remove [-f] @var{name} -@findex nbd_server_remove -Stop exporting a block device through QEMU's NBD server, which was -previously started with @command{nbd_server_add}. The @option{-f} -option forces the server to drop the export immediately even if -clients are connected; otherwise the command fails unless there are no -clients. -ETEXI SRST ``nbd_server_remove [-f]`` *name* Stop exporting a block device through QEMU's NBD server, which was @@ -2268,11 +1565,6 @@ ERST .help = "stop serving block devices using the NBD protocol", .cmd = hmp_nbd_server_stop, }, -STEXI -@item nbd_server_stop -@findex nbd_server_stop -Stop the QEMU embedded NBD server. -ETEXI SRST ``nbd_server_stop`` Stop the QEMU embedded NBD server. @@ -2290,11 +1582,6 @@ ERST }, #endif -STEXI -@item mce @var{cpu} @var{bank} @var{status} @var{mcgstatus} @var{addr} @var{misc} -@findex mce (x86) -Inject an MCE on the given CPU (x86 only). -ETEXI SRST ``mce`` *cpu* *bank* *status* *mcgstatus* *addr* *misc* Inject an MCE on the given CPU (x86 only). @@ -2308,13 +1595,6 @@ ERST .cmd = hmp_getfd, }, -STEXI -@item getfd @var{fdname} -@findex getfd -If a file descriptor is passed alongside this command using the SCM_RIGHTS -mechanism on unix sockets, it is stored using the name @var{fdname} for -later use by other monitor commands. -ETEXI SRST ``getfd`` *fdname* If a file descriptor is passed alongside this command using the SCM_RIGHTS @@ -2330,13 +1610,6 @@ ERST .cmd = hmp_closefd, }, -STEXI -@item closefd @var{fdname} -@findex closefd -Close the file descriptor previously assigned to @var{fdname} using the -@code{getfd} command. This is only needed if the file descriptor was never -used by another monitor command. -ETEXI SRST ``closefd`` *fdname* Close the file descriptor previously assigned to *fdname* using the @@ -2352,13 +1625,6 @@ ERST .cmd = hmp_block_passwd, }, -STEXI -@item block_passwd @var{device} @var{password} -@findex block_passwd -Set the encrypted device @var{device} password to @var{password} - -This command is now obsolete and will always return an error since 2.10 -ETEXI SRST ``block_passwd`` *device* *password* Set the encrypted device *device* password to *password* @@ -2374,12 +1640,6 @@ ERST .cmd = hmp_block_set_io_throttle, }, -STEXI -@item block_set_io_throttle @var{device} @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr} -@findex block_set_io_throttle -Change I/O throttle limits for a block drive to @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}. -@var{device} can be a block device name, a qdev ID or a QOM path. -ETEXI SRST ``block_set_io_throttle`` *device* *bps* *bps_rd* *bps_wr* *iops* *iops_rd* *iops_wr* Change I/O throttle limits for a block drive to @@ -2395,16 +1655,6 @@ ERST .cmd = hmp_set_password, }, -STEXI -@item set_password [ vnc | spice ] password [ action-if-connected ] -@findex set_password -Change spice/vnc password. Use zero to make the password stay valid -forever. @var{action-if-connected} specifies what should happen in -case a connection is established: @var{fail} makes the password change -fail. @var{disconnect} changes the password and disconnects the -client. @var{keep} changes the password and keeps the connection up. -@var{keep} is the default. -ETEXI SRST ``set_password [ vnc | spice ] password [ action-if-connected ]`` Change spice/vnc password. Use zero to make the password stay valid @@ -2423,28 +1673,6 @@ ERST .cmd = hmp_expire_password, }, -STEXI -@item expire_password [ vnc | spice ] expire-time -@findex expire_password -Specify when a password for spice/vnc becomes -invalid. @var{expire-time} accepts: - -@table @var -@item now -Invalidate password instantly. - -@item never -Password stays valid forever. - -@item +nsec -Password stays valid for @var{nsec} seconds starting now. - -@item nsec -Password is invalidated at the given time. @var{nsec} are the seconds -passed since 1970, i.e. unix epoch. - -@end table -ETEXI SRST ``expire_password [ vnc | spice ]`` *expire-time* Specify when a password for spice/vnc becomes @@ -2471,12 +1699,6 @@ ERST .command_completion = chardev_add_completion, }, -STEXI -@item chardev-add args -@findex chardev-add -chardev-add accepts the same parameters as the -chardev command line switch. - -ETEXI SRST ``chardev-add`` *args* chardev-add accepts the same parameters as the -chardev command line switch. @@ -2490,13 +1712,6 @@ ERST .cmd = hmp_chardev_change, }, -STEXI -@item chardev-change args -@findex chardev-change -chardev-change accepts existing chardev @var{id} and then the same arguments -as the -chardev command line switch (except for "id"). - -ETEXI SRST ``chardev-change`` *args* chardev-change accepts existing chardev *id* and then the same arguments @@ -2512,12 +1727,6 @@ ERST .command_completion = chardev_remove_completion, }, -STEXI -@item chardev-remove id -@findex chardev-remove -Removes the chardev @var{id}. - -ETEXI SRST ``chardev-remove`` *id* Removes the chardev *id*. @@ -2532,12 +1741,6 @@ ERST .command_completion = chardev_remove_completion, }, -STEXI -@item chardev-send-break id -@findex chardev-send-break -Send a break on the chardev @var{id}. - -ETEXI SRST ``chardev-send-break`` *id* Send a break on the chardev *id*. @@ -2553,12 +1756,6 @@ ERST .cmd = hmp_qemu_io, }, -STEXI -@item qemu-io @var{device} @var{command} -@findex qemu-io -Executes a qemu-io command on the given block device. - -ETEXI SRST ``qemu-io`` *device* *command* Executes a qemu-io command on the given block device. @@ -2572,13 +1769,6 @@ ERST .cmd = hmp_cpu_add, }, -STEXI -@item cpu-add @var{id} -@findex cpu-add -Add CPU with id @var{id}. This command is deprecated, please -+use @code{device_add} instead. For details, refer to -'docs/cpu-hotplug.rst'. -ETEXI SRST ``cpu-add`` *id* Add CPU with id *id*. This command is deprecated, please @@ -2595,10 +1785,6 @@ ERST .flags = "p", }, -STEXI -@item qom-list [@var{path}] -Print QOM properties of object at location @var{path} -ETEXI SRST ``qom-list`` [*path*] Print QOM properties of object at location *path* @@ -2613,10 +1799,6 @@ ERST .flags = "p", }, -STEXI -@item qom-set @var{path} @var{property} @var{value} -Set QOM property @var{property} of object at location @var{path} to value @var{value} -ETEXI SRST ``qom-set`` *path* *property* *value* Set QOM property *property* of object at location *path* to value *value* @@ -2632,6 +1814,3 @@ ERST .flags = "p", }, -STEXI -@end table -ETEXI |