diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/system/arm/versatile.rst | 34 | ||||
| -rw-r--r-- | docs/system/arm/vexpress.rst | 28 |
2 files changed, 62 insertions, 0 deletions
diff --git a/docs/system/arm/versatile.rst b/docs/system/arm/versatile.rst index 51221c30a4..2ae792bac3 100644 --- a/docs/system/arm/versatile.rst +++ b/docs/system/arm/versatile.rst @@ -27,3 +27,37 @@ The Arm Versatile baseboard is emulated with the following devices: devices. - PL181 MultiMedia Card Interface with SD card. + +Booting a Linux kernel +---------------------- + +Building a current Linux kernel with ``versatile_defconfig`` should be +enough to get something running. Nowadays an out-of-tree build is +recommended (and also useful if you build a lot of different targets). +In the following example $BLD points to the build directory and $SRC +points to the root of the Linux source tree. You can drop $SRC if you +are running from there. + +.. code-block:: bash + + $ make O=$BLD -C $SRC ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- versatile_defconfig + $ make O=$BLD -C $SRC ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- + +You may want to enable some additional modules if you want to boot +something from the SCSI interface:: + + CONFIG_PCI=y + CONFIG_PCI_VERSATILE=y + CONFIG_SCSI=y + CONFIG_SCSI_SYM53C8XX_2=y + +You can then boot with a command line like: + +.. code-block:: bash + + $ qemu-system-arm -machine type=versatilepb \ + -serial mon:stdio \ + -drive if=scsi,driver=file,filename=debian-buster-armel-rootfs.ext4 \ + -kernel zImage \ + -dtb versatile-pb.dtb \ + -append "console=ttyAMA0 ro root=/dev/sda" diff --git a/docs/system/arm/vexpress.rst b/docs/system/arm/vexpress.rst index 7f1bcbef07..3e3839e923 100644 --- a/docs/system/arm/vexpress.rst +++ b/docs/system/arm/vexpress.rst @@ -58,3 +58,31 @@ Other differences between the hardware and the QEMU model: ``vexpress-a15``, and have IRQs from 40 upwards. If a dtb is provided on the command line then QEMU will edit it to include suitable entries describing these transports for the guest. + +Booting a Linux kernel +---------------------- + +Building a current Linux kernel with ``multi_v7_defconfig`` should be +enough to get something running. Nowadays an out-of-tree build is +recommended (and also useful if you build a lot of different targets). +In the following example $BLD points to the build directory and $SRC +points to the root of the Linux source tree. You can drop $SRC if you +are running from there. + +.. code-block:: bash + + $ make O=$BLD -C $SRC ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- multi_v7_defconfig + $ make O=$BLD -C $SRC ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- + +By default you will want to boot your rootfs off the sdcard interface. +Your rootfs will need to be padded to the right size. With a suitable +DTB you could also add devices to the virtio-mmio bus. + +.. code-block:: bash + + $ qemu-system-arm -cpu cortex-a15 -smp 4 -m 4096 \ + -machine type=vexpress-a15 -serial mon:stdio \ + -drive if=sd,driver=file,filename=armel-rootfs.ext4 \ + -kernel zImage \ + -dtb vexpress-v2p-ca15-tc1.dtb \ + -append "console=ttyAMA0 root=/dev/mmcblk0 ro" |