diff options
Diffstat (limited to 'crypto/block-luks.c')
-rw-r--r-- | crypto/block-luks.c | 91 |
1 files changed, 47 insertions, 44 deletions
diff --git a/crypto/block-luks.c b/crypto/block-luks.c index 743949adbf..f12fa2d270 100644 --- a/crypto/block-luks.c +++ b/crypto/block-luks.c @@ -143,7 +143,7 @@ struct QCryptoBlockLUKSKeySlot { /* salt for PBKDF2 */ uint8_t salt[QCRYPTO_BLOCK_LUKS_SALT_LEN]; /* start sector of key material */ - uint32_t key_offset; + uint32_t key_offset_sector; /* number of anti-forensic stripes */ uint32_t stripes; }; @@ -172,10 +172,10 @@ struct QCryptoBlockLUKSHeader { char hash_spec[QCRYPTO_BLOCK_LUKS_HASH_SPEC_LEN]; /* start offset of the volume data (in 512 byte sectors) */ - uint32_t payload_offset; + uint32_t payload_offset_sector; /* Number of key bytes */ - uint32_t key_bytes; + uint32_t master_key_len; /* master key checksum after PBKDF2 */ uint8_t master_key_digest[QCRYPTO_BLOCK_LUKS_DIGEST_LEN]; @@ -466,7 +466,7 @@ qcrypto_block_luks_load_key(QCryptoBlock *block, * then encrypted. */ rv = readfunc(block, - slot->key_offset * QCRYPTO_BLOCK_LUKS_SECTOR_SIZE, + slot->key_offset_sector * QCRYPTO_BLOCK_LUKS_SECTOR_SIZE, splitkey, splitkeylen, opaque, errp); @@ -584,8 +584,8 @@ qcrypto_block_luks_find_key(QCryptoBlock *block, size_t i; int rv; - *masterkey = g_new0(uint8_t, luks->header.key_bytes); - *masterkeylen = luks->header.key_bytes; + *masterkey = g_new0(uint8_t, luks->header.master_key_len); + *masterkeylen = luks->header.master_key_len; for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) { rv = qcrypto_block_luks_load_key(block, @@ -677,14 +677,14 @@ qcrypto_block_luks_open(QCryptoBlock *block, /* The header is always stored in big-endian format, so * convert everything to native */ be16_to_cpus(&luks->header.version); - be32_to_cpus(&luks->header.payload_offset); - be32_to_cpus(&luks->header.key_bytes); + be32_to_cpus(&luks->header.payload_offset_sector); + be32_to_cpus(&luks->header.master_key_len); be32_to_cpus(&luks->header.master_key_iterations); for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) { be32_to_cpus(&luks->header.key_slots[i].active); be32_to_cpus(&luks->header.key_slots[i].iterations); - be32_to_cpus(&luks->header.key_slots[i].key_offset); + be32_to_cpus(&luks->header.key_slots[i].key_offset_sector); be32_to_cpus(&luks->header.key_slots[i].stripes); } @@ -743,10 +743,11 @@ qcrypto_block_luks_open(QCryptoBlock *block, goto fail; } - cipheralg = qcrypto_block_luks_cipher_name_lookup(luks->header.cipher_name, - ciphermode, - luks->header.key_bytes, - &local_err); + cipheralg = + qcrypto_block_luks_cipher_name_lookup(luks->header.cipher_name, + ciphermode, + luks->header.master_key_len, + &local_err); if (local_err) { ret = -ENOTSUP; error_propagate(errp, local_err); @@ -838,7 +839,7 @@ qcrypto_block_luks_open(QCryptoBlock *block, } block->sector_size = QCRYPTO_BLOCK_LUKS_SECTOR_SIZE; - block->payload_offset = luks->header.payload_offset * + block->payload_offset = luks->header.payload_offset_sector * block->sector_size; luks->cipher_alg = cipheralg; @@ -993,9 +994,11 @@ qcrypto_block_luks_create(QCryptoBlock *block, strcpy(luks->header.cipher_mode, cipher_mode_spec); strcpy(luks->header.hash_spec, hash_alg); - luks->header.key_bytes = qcrypto_cipher_get_key_len(luks_opts.cipher_alg); + luks->header.master_key_len = + qcrypto_cipher_get_key_len(luks_opts.cipher_alg); + if (luks_opts.cipher_mode == QCRYPTO_CIPHER_MODE_XTS) { - luks->header.key_bytes *= 2; + luks->header.master_key_len *= 2; } /* Generate the salt used for hashing the master key @@ -1008,9 +1011,9 @@ qcrypto_block_luks_create(QCryptoBlock *block, } /* Generate random master key */ - masterkey = g_new0(uint8_t, luks->header.key_bytes); + masterkey = g_new0(uint8_t, luks->header.master_key_len); if (qcrypto_random_bytes(masterkey, - luks->header.key_bytes, errp) < 0) { + luks->header.master_key_len, errp) < 0) { goto error; } @@ -1018,7 +1021,7 @@ qcrypto_block_luks_create(QCryptoBlock *block, /* Setup the block device payload encryption objects */ if (qcrypto_block_init_cipher(block, luks_opts.cipher_alg, luks_opts.cipher_mode, masterkey, - luks->header.key_bytes, 1, errp) < 0) { + luks->header.master_key_len, 1, errp) < 0) { goto error; } @@ -1028,7 +1031,7 @@ qcrypto_block_luks_create(QCryptoBlock *block, block->ivgen = qcrypto_ivgen_new(luks_opts.ivgen_alg, ivcipheralg, luks_opts.ivgen_hash_alg, - masterkey, luks->header.key_bytes, + masterkey, luks->header.master_key_len, errp); if (!block->ivgen) { @@ -1040,7 +1043,7 @@ qcrypto_block_luks_create(QCryptoBlock *block, * key, in order to have 1 second of compute time used */ iters = qcrypto_pbkdf2_count_iters(luks_opts.hash_alg, - masterkey, luks->header.key_bytes, + masterkey, luks->header.master_key_len, luks->header.master_key_salt, QCRYPTO_BLOCK_LUKS_SALT_LEN, QCRYPTO_BLOCK_LUKS_DIGEST_LEN, @@ -1080,7 +1083,7 @@ qcrypto_block_luks_create(QCryptoBlock *block, * valid master key */ if (qcrypto_pbkdf2(luks_opts.hash_alg, - masterkey, luks->header.key_bytes, + masterkey, luks->header.master_key_len, luks->header.master_key_salt, QCRYPTO_BLOCK_LUKS_SALT_LEN, luks->header.master_key_iterations, @@ -1093,7 +1096,7 @@ qcrypto_block_luks_create(QCryptoBlock *block, /* Although LUKS has multiple key slots, we're just going * to use the first key slot */ - splitkeylen = luks->header.key_bytes * QCRYPTO_BLOCK_LUKS_STRIPES; + splitkeylen = luks->header.master_key_len * QCRYPTO_BLOCK_LUKS_STRIPES; for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) { luks->header.key_slots[i].active = i == 0 ? QCRYPTO_BLOCK_LUKS_KEY_SLOT_ENABLED : @@ -1103,7 +1106,7 @@ qcrypto_block_luks_create(QCryptoBlock *block, /* This calculation doesn't match that shown in the spec, * but instead follows the cryptsetup implementation. */ - luks->header.key_slots[i].key_offset = + luks->header.key_slots[i].key_offset_sector = (QCRYPTO_BLOCK_LUKS_KEY_SLOT_OFFSET / QCRYPTO_BLOCK_LUKS_SECTOR_SIZE) + (ROUND_UP(DIV_ROUND_UP(splitkeylen, QCRYPTO_BLOCK_LUKS_SECTOR_SIZE), @@ -1124,7 +1127,7 @@ qcrypto_block_luks_create(QCryptoBlock *block, (uint8_t *)password, strlen(password), luks->header.key_slots[0].salt, QCRYPTO_BLOCK_LUKS_SALT_LEN, - luks->header.key_bytes, + luks->header.master_key_len, &local_err); if (local_err) { error_propagate(errp, local_err); @@ -1155,13 +1158,13 @@ qcrypto_block_luks_create(QCryptoBlock *block, /* Generate a key that we'll use to encrypt the master * key, from the user's password */ - slotkey = g_new0(uint8_t, luks->header.key_bytes); + slotkey = g_new0(uint8_t, luks->header.master_key_len); if (qcrypto_pbkdf2(luks_opts.hash_alg, (uint8_t *)password, strlen(password), luks->header.key_slots[0].salt, QCRYPTO_BLOCK_LUKS_SALT_LEN, luks->header.key_slots[0].iterations, - slotkey, luks->header.key_bytes, + slotkey, luks->header.master_key_len, errp) < 0) { goto error; } @@ -1172,7 +1175,7 @@ qcrypto_block_luks_create(QCryptoBlock *block, */ cipher = qcrypto_cipher_new(luks_opts.cipher_alg, luks_opts.cipher_mode, - slotkey, luks->header.key_bytes, + slotkey, luks->header.master_key_len, errp); if (!cipher) { goto error; @@ -1181,7 +1184,7 @@ qcrypto_block_luks_create(QCryptoBlock *block, ivgen = qcrypto_ivgen_new(luks_opts.ivgen_alg, ivcipheralg, luks_opts.ivgen_hash_alg, - slotkey, luks->header.key_bytes, + slotkey, luks->header.master_key_len, errp); if (!ivgen) { goto error; @@ -1193,7 +1196,7 @@ qcrypto_block_luks_create(QCryptoBlock *block, splitkey = g_new0(uint8_t, splitkeylen); if (qcrypto_afsplit_encode(luks_opts.hash_alg, - luks->header.key_bytes, + luks->header.master_key_len, luks->header.key_slots[0].stripes, masterkey, splitkey, @@ -1217,7 +1220,7 @@ qcrypto_block_luks_create(QCryptoBlock *block, * slot headers, rounded up to the nearest sector, combined with * the size of each master key material region, also rounded up * to the nearest sector */ - luks->header.payload_offset = + luks->header.payload_offset_sector = (QCRYPTO_BLOCK_LUKS_KEY_SLOT_OFFSET / QCRYPTO_BLOCK_LUKS_SECTOR_SIZE) + (ROUND_UP(DIV_ROUND_UP(splitkeylen, QCRYPTO_BLOCK_LUKS_SECTOR_SIZE), @@ -1226,7 +1229,7 @@ qcrypto_block_luks_create(QCryptoBlock *block, QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS); block->sector_size = QCRYPTO_BLOCK_LUKS_SECTOR_SIZE; - block->payload_offset = luks->header.payload_offset * + block->payload_offset = luks->header.payload_offset_sector * block->sector_size; /* Reserve header space to match payload offset */ @@ -1239,14 +1242,14 @@ qcrypto_block_luks_create(QCryptoBlock *block, /* Everything on disk uses Big Endian, so flip header fields * before writing them */ cpu_to_be16s(&luks->header.version); - cpu_to_be32s(&luks->header.payload_offset); - cpu_to_be32s(&luks->header.key_bytes); + cpu_to_be32s(&luks->header.payload_offset_sector); + cpu_to_be32s(&luks->header.master_key_len); cpu_to_be32s(&luks->header.master_key_iterations); for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) { cpu_to_be32s(&luks->header.key_slots[i].active); cpu_to_be32s(&luks->header.key_slots[i].iterations); - cpu_to_be32s(&luks->header.key_slots[i].key_offset); + cpu_to_be32s(&luks->header.key_slots[i].key_offset_sector); cpu_to_be32s(&luks->header.key_slots[i].stripes); } @@ -1263,14 +1266,14 @@ qcrypto_block_luks_create(QCryptoBlock *block, /* Byte swap the header back to native, in case we need * to read it again later */ be16_to_cpus(&luks->header.version); - be32_to_cpus(&luks->header.payload_offset); - be32_to_cpus(&luks->header.key_bytes); + be32_to_cpus(&luks->header.payload_offset_sector); + be32_to_cpus(&luks->header.master_key_len); be32_to_cpus(&luks->header.master_key_iterations); for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) { be32_to_cpus(&luks->header.key_slots[i].active); be32_to_cpus(&luks->header.key_slots[i].iterations); - be32_to_cpus(&luks->header.key_slots[i].key_offset); + be32_to_cpus(&luks->header.key_slots[i].key_offset_sector); be32_to_cpus(&luks->header.key_slots[i].stripes); } @@ -1282,7 +1285,7 @@ qcrypto_block_luks_create(QCryptoBlock *block, /* Write out the master key material, starting at the * sector immediately following the partition header. */ if (writefunc(block, - luks->header.key_slots[0].key_offset * + luks->header.key_slots[0].key_offset_sector * QCRYPTO_BLOCK_LUKS_SECTOR_SIZE, splitkey, splitkeylen, opaque, @@ -1296,17 +1299,17 @@ qcrypto_block_luks_create(QCryptoBlock *block, luks->ivgen_hash_alg = luks_opts.ivgen_hash_alg; luks->hash_alg = luks_opts.hash_alg; - memset(masterkey, 0, luks->header.key_bytes); - memset(slotkey, 0, luks->header.key_bytes); + memset(masterkey, 0, luks->header.master_key_len); + memset(slotkey, 0, luks->header.master_key_len); return 0; error: if (masterkey) { - memset(masterkey, 0, luks->header.key_bytes); + memset(masterkey, 0, luks->header.master_key_len); } if (slotkey) { - memset(slotkey, 0, luks->header.key_bytes); + memset(slotkey, 0, luks->header.master_key_len); } qcrypto_block_free_cipher(block); @@ -1346,7 +1349,7 @@ static int qcrypto_block_luks_get_info(QCryptoBlock *block, slots->value = slot = g_new0(QCryptoBlockInfoLUKSSlot, 1); slot->active = luks->header.key_slots[i].active == QCRYPTO_BLOCK_LUKS_KEY_SLOT_ENABLED; - slot->key_offset = luks->header.key_slots[i].key_offset + slot->key_offset = luks->header.key_slots[i].key_offset_sector * QCRYPTO_BLOCK_LUKS_SECTOR_SIZE; if (slot->active) { slot->has_iters = true; |