diff options
Diffstat (limited to 'configure')
| -rwxr-xr-x | configure | 157 |
1 files changed, 15 insertions, 142 deletions
@@ -495,27 +495,10 @@ qed="yes" parallels="yes" sheepdog="yes" libxml2="" -container="no" debug_mutex="no" libpmem="" default_devices="yes" -# cross compilers defaults, can be overridden with --cross-cc-ARCH -cross_cc_aarch64="aarch64-linux-gnu-gcc" -cross_cc_aarch64_be="$cross_cc_aarch64" -cross_cc_cflags_aarch64_be="-mbig-endian" -cross_cc_arm="arm-linux-gnueabihf-gcc" -cross_cc_cflags_armeb="-mbig-endian" -cross_cc_i386="i386-pc-linux-gnu-gcc" -cross_cc_cflags_i386="" -cross_cc_ppc="powerpc-linux-gnu-gcc" -cross_cc_cflags_ppc="-m32" -cross_cc_ppc64="powerpc-linux-gnu-gcc" -cross_cc_cflags_ppc64="-m64" -cross_cc_ppc64le="powerpc64le-linux-gnu-gcc" - -enabled_cross_compilers="" - supported_cpu="no" supported_os="no" bogus_os="no" @@ -548,9 +531,12 @@ for opt do ;; --cross-cc-cflags-*) cc_arch=${opt#--cross-cc-flags-}; cc_arch=${cc_arch%%=*} eval "cross_cc_cflags_${cc_arch}=\$optarg" + cross_cc_vars="$cross_cc_vars cross_cc_cflags_${cc_arch}" ;; --cross-cc-*) cc_arch=${opt#--cross-cc-}; cc_arch=${cc_arch%%=*} + cc_archs="$cc_archs $cc_arch" eval "cross_cc_${cc_arch}=\$optarg" + cross_cc_vars="$cross_cc_vars cross_cc_${cc_arch}" ;; esac done @@ -745,42 +731,34 @@ ARCH= case "$cpu" in ppc|ppc64|s390|s390x|sparc64|x32|riscv32|riscv64) supported_cpu="yes" - eval "cross_cc_${cpu}=\$host_cc" ;; ppc64le) ARCH="ppc64" supported_cpu="yes" - cross_cc_ppc64le=$host_cc ;; i386|i486|i586|i686|i86pc|BePC) cpu="i386" supported_cpu="yes" - cross_cc_i386=$host_cc ;; x86_64|amd64) cpu="x86_64" supported_cpu="yes" - cross_cc_x86_64=$host_cc ;; armv*b|armv*l|arm) cpu="arm" supported_cpu="yes" - cross_cc_arm=$host_cc ;; aarch64) cpu="aarch64" supported_cpu="yes" - cross_cc_aarch64=$host_cc ;; mips*) cpu="mips" supported_cpu="yes" - cross_cc_mips=$host_cc ;; sparc|sun4[cdmuv]) cpu="sparc" supported_cpu="yes" - cross_cc_sparc=$host_cc ;; *) # This will result in either an error or falling back to TCI later @@ -1555,44 +1533,30 @@ case "$cpu" in ppc) CPU_CFLAGS="-m32" LDFLAGS="-m32 $LDFLAGS" - cross_cc_ppc=$cc - cross_cc_cflags_ppc="$CPU_CFLAGS" ;; ppc64) CPU_CFLAGS="-m64" LDFLAGS="-m64 $LDFLAGS" - cross_cc_ppc64=$cc - cross_cc_cflags_ppc64="$CPU_CFLAGS" ;; sparc) CPU_CFLAGS="-m32 -mv8plus -mcpu=ultrasparc" LDFLAGS="-m32 -mv8plus $LDFLAGS" - cross_cc_sparc=$cc - cross_cc_cflags_sparc="$CPU_CFLAGS" ;; sparc64) CPU_CFLAGS="-m64 -mcpu=ultrasparc" LDFLAGS="-m64 $LDFLAGS" - cross_cc_sparc64=$cc - cross_cc_cflags_sparc64="$CPU_CFLAGS" ;; s390) CPU_CFLAGS="-m31" LDFLAGS="-m31 $LDFLAGS" - cross_cc_s390=$cc - cross_cc_cflags_s390="$CPU_CFLAGS" ;; s390x) CPU_CFLAGS="-m64" LDFLAGS="-m64 $LDFLAGS" - cross_cc_s390x=$cc - cross_cc_cflags_s390x="$CPU_CFLAGS" ;; i386) CPU_CFLAGS="-m32" LDFLAGS="-m32 $LDFLAGS" - cross_cc_i386=$cc - cross_cc_cflags_i386="$CPU_CFLAGS" ;; x86_64) # ??? Only extremely old AMD cpus do not have cmpxchg16b. @@ -1600,18 +1564,16 @@ case "$cpu" in # runtime and generate the fallback to serial emulation. CPU_CFLAGS="-m64 -mcx16" LDFLAGS="-m64 $LDFLAGS" - cross_cc_x86_64=$cc - cross_cc_cflags_x86_64="$CPU_CFLAGS" ;; x32) CPU_CFLAGS="-mx32" LDFLAGS="-mx32 $LDFLAGS" - cross_cc_i386=$cc - cross_cc_cflags_i386="$CPU_CFLAGS" ;; # No special flags required for other host CPUs esac +eval "cross_cc_${cpu}=\$host_cc" +cross_cc_vars="$cross_cc_vars cross_cc_${cpu}" QEMU_CFLAGS="$CPU_CFLAGS $QEMU_CFLAGS" # For user-mode emulation the host arch has to be one we explicitly @@ -5894,17 +5856,6 @@ EOF fi ########################################## -# Container based cross-compiler support -# -# This is specifically for building test -# cases for foreign architectures, not -# cross-compiling QEMU itself. - -if has "docker" || has "podman"; then - container=$($python $source_path/tests/docker/docker.py probe) -fi - -########################################## # check for libpmem if test "$libpmem" != "no"; then @@ -6474,7 +6425,6 @@ echo "qed support $qed" echo "parallels support $parallels" echo "sheepdog support $sheepdog" echo "capstone $capstone" -echo "container support $container" echo "libpmem support $libpmem" echo "libudev $libudev" echo "default devices $default_devices" @@ -7384,10 +7334,6 @@ if test "$gcov" = "yes" ; then echo "GCOV=$gcov_tool" >> $config_host_mak fi -if test "$docker" != "no"; then - echo "HAVE_USER_DOCKER=y" >> $config_host_mak -fi - if test "$libudev" != "no"; then echo "CONFIG_LIBUDEV=y" >> $config_host_mak echo "LIBUDEV_LIBS=$libudev_libs" >> $config_host_mak @@ -7461,10 +7407,6 @@ case "$target" in ;; esac -target_compiler="" -target_compiler_static="" -target_compiler_cflags="" - mkdir -p $target_dir echo "# Automatically generated by configure - do not modify" > $config_target_mak @@ -7481,26 +7423,20 @@ case "$target_name" in i386) mttcg="yes" gdb_xml_files="i386-32bit.xml" - target_compiler=$cross_cc_i386 - target_compiler_cflags=$cross_cc_ccflags_i386 ;; x86_64) TARGET_BASE_ARCH=i386 mttcg="yes" gdb_xml_files="i386-64bit.xml" - target_compiler=$cross_cc_x86_64 ;; alpha) mttcg="yes" - target_compiler=$cross_cc_alpha ;; arm|armeb) TARGET_ARCH=arm bflt="yes" mttcg="yes" gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml" - target_compiler=$cross_cc_arm - eval "target_compiler_cflags=\$cross_cc_cflags_${target_name}" ;; aarch64|aarch64_be) TARGET_ARCH=aarch64 @@ -7508,41 +7444,32 @@ case "$target_name" in bflt="yes" mttcg="yes" gdb_xml_files="aarch64-core.xml aarch64-fpu.xml arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml" - target_compiler=$cross_cc_aarch64 - eval "target_compiler_cflags=\$cross_cc_cflags_${target_name}" ;; cris) - target_compiler=$cross_cc_cris ;; hppa) mttcg="yes" - target_compiler=$cross_cc_hppa ;; lm32) - target_compiler=$cross_cc_lm32 ;; m68k) bflt="yes" gdb_xml_files="cf-core.xml cf-fp.xml m68k-fp.xml" - target_compiler=$cross_cc_m68k ;; microblaze|microblazeel) TARGET_ARCH=microblaze bflt="yes" echo "TARGET_ABI32=y" >> $config_target_mak - target_compiler=$cross_cc_microblaze ;; mips|mipsel) mttcg="yes" TARGET_ARCH=mips - target_compiler=$cross_cc_mips echo "TARGET_ABI_MIPSO32=y" >> $config_target_mak ;; mipsn32|mipsn32el) mttcg="yes" TARGET_ARCH=mips64 TARGET_BASE_ARCH=mips - target_compiler=$cross_cc_mipsn32 echo "TARGET_ABI_MIPSN32=y" >> $config_target_mak echo "TARGET_ABI32=y" >> $config_target_mak ;; @@ -7550,32 +7477,24 @@ case "$target_name" in mttcg="yes" TARGET_ARCH=mips64 TARGET_BASE_ARCH=mips - target_compiler=$cross_cc_mips64 echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak ;; moxie) - target_compiler=$cross_cc_moxie ;; nios2) - target_compiler=$cross_cc_nios2 ;; or1k) - target_compiler=$cross_cc_or1k TARGET_ARCH=openrisc TARGET_BASE_ARCH=openrisc ;; ppc) gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml" - target_compiler=$cross_cc_ppc - target_compiler_cflags="$cross_cc_cflags_ppc" ;; ppc64) TARGET_BASE_ARCH=ppc TARGET_ABI_DIR=ppc mttcg=yes gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml" - target_compiler=$cross_cc_ppc64 - target_compiler_cflags="$cross_cc_cflags_ppc64" ;; ppc64le) TARGET_ARCH=ppc64 @@ -7583,7 +7502,6 @@ case "$target_name" in TARGET_ABI_DIR=ppc mttcg=yes gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml" - target_compiler=$cross_cc_ppc64le ;; ppc64abi32) TARGET_ARCH=ppc64 @@ -7591,60 +7509,48 @@ case "$target_name" in TARGET_ABI_DIR=ppc echo "TARGET_ABI32=y" >> $config_target_mak gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml" - target_compiler=$cross_cc_ppc64abi32 ;; riscv32) TARGET_BASE_ARCH=riscv TARGET_ABI_DIR=riscv mttcg=yes gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-32bit-csr.xml" - target_compiler=$cross_cc_riscv32 ;; riscv64) TARGET_BASE_ARCH=riscv TARGET_ABI_DIR=riscv mttcg=yes gdb_xml_files="riscv-64bit-cpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml" - target_compiler=$cross_cc_riscv64 ;; sh4|sh4eb) TARGET_ARCH=sh4 bflt="yes" - target_compiler=$cross_cc_sh4 ;; sparc) - target_compiler=$cross_cc_sparc ;; sparc64) TARGET_BASE_ARCH=sparc - target_compiler=$cross_cc_sparc64 ;; sparc32plus) TARGET_ARCH=sparc64 TARGET_BASE_ARCH=sparc TARGET_ABI_DIR=sparc - target_compiler=$cross_cc_sparc32plus echo "TARGET_ABI32=y" >> $config_target_mak ;; s390x) mttcg=yes gdb_xml_files="s390x-core64.xml s390-acr.xml s390-fpr.xml s390-vx.xml s390-cr.xml s390-virt.xml s390-gs.xml" - target_compiler=$cross_cc_s390x ;; tilegx) - target_compiler=$cross_cc_tilegx ;; tricore) - target_compiler=$cross_cc_tricore ;; unicore32) - target_compiler=$cross_cc_unicore32 ;; xtensa|xtensaeb) TARGET_ARCH=xtensa bflt="yes" mttcg="yes" - target_compiler=$cross_cc_xtensa ;; *) error_exit "Unsupported target CPU" @@ -7655,27 +7561,6 @@ if [ "$TARGET_BASE_ARCH" = "" ]; then TARGET_BASE_ARCH=$TARGET_ARCH fi -# Do we have a cross compiler for this target? -if has $target_compiler; then - - write_c_skeleton - - if ! do_compiler "$target_compiler" $target_compiler_cflags -o $TMPE $TMPC -static ; then - # For host systems we might get away with building without -static - if ! do_compiler "$target_compiler" $target_compiler_cflags -o $TMPE $TMPC ; then - target_compiler="" - else - enabled_cross_compilers="${enabled_cross_compilers} '${target_compiler}'" - target_compiler_static="n" - fi - else - enabled_cross_compilers="${enabled_cross_compilers} '${target_compiler}'" - target_compiler_static="y" - fi -else - target_compiler="" -fi - symlink "$source_path/Makefile.target" "$target_dir/Makefile" upper() { @@ -7752,18 +7637,6 @@ if test "$target_bsd_user" = "yes" ; then echo "CONFIG_BSD_USER=y" >> $config_target_mak fi -if test -n "$target_compiler"; then - echo "CROSS_CC_GUEST=\"$target_compiler\"" >> $config_target_mak - - if test -n "$target_compiler_static"; then - echo "CROSS_CC_GUEST_STATIC=$target_compiler_static" >> $config_target_mak - fi - - if test -n "$target_compiler_cflags"; then - echo "CROSS_CC_GUEST_CFLAGS=$target_compiler_cflags" >> $config_target_mak - fi -fi - # generate QEMU_CFLAGS/LDFLAGS for targets @@ -7894,11 +7767,6 @@ done # for target in $targets echo "PIXMAN_CFLAGS=$pixman_cflags" >> $config_host_mak echo "PIXMAN_LIBS=$pixman_libs" >> $config_host_mak -if test -n "$enabled_cross_compilers"; then - echo - echo "NOTE: cross-compilers enabled: $enabled_cross_compilers" -fi - if [ "$fdt" = "git" ]; then echo "config-host.h: dtc/all" >> $config_host_mak fi @@ -7927,15 +7795,14 @@ fi # so the build tree will be missing the link back to the new file, and # tests might fail. Prefer to keep the relevant files in their own # directory and symlink the directory instead. -DIRS="tests tests/tcg tests/tcg/cris tests/tcg/lm32 tests/libqos tests/qapi-schema tests/tcg/xtensa tests/qemu-iotests tests/vm" +DIRS="tests tests/tcg tests/tcg/lm32 tests/libqos tests/qapi-schema tests/qemu-iotests tests/vm" DIRS="$DIRS tests/fp tests/qgraph" DIRS="$DIRS docs docs/interop fsdev scsi" DIRS="$DIRS pc-bios/optionrom pc-bios/spapr-rtas pc-bios/s390-ccw" DIRS="$DIRS roms/seabios roms/vgabios" -LINKS="Makefile tests/tcg/Makefile" -LINKS="$LINKS tests/tcg/cris/Makefile tests/tcg/cris/.gdbinit" -LINKS="$LINKS tests/tcg/lm32/Makefile tests/tcg/xtensa/Makefile po/Makefile" -LINKS="$LINKS tests/fp/Makefile" +LINKS="Makefile" +LINKS="$LINKS tests/tcg/lm32/Makefile po/Makefile" +LINKS="$LINKS tests/tcg/Makefile.target tests/fp/Makefile" LINKS="$LINKS pc-bios/optionrom/Makefile pc-bios/keymaps" LINKS="$LINKS pc-bios/spapr-rtas/Makefile" LINKS="$LINKS pc-bios/s390-ccw/Makefile" @@ -7965,6 +7832,12 @@ for f in $LINKS ; do fi done +(for i in $cross_cc_vars; do + export $i +done +export target_list source_path +$source_path/tests/tcg/configure.sh) + # temporary config to build submodules for rom in seabios vgabios ; do config_mak=roms/$rom/config.mak |