diff options
Diffstat (limited to 'configure')
| -rwxr-xr-x | configure | 362 |
1 files changed, 181 insertions, 181 deletions
@@ -1004,6 +1004,25 @@ for opt do esac done +if ! has $python; then + error_exit "Python not found. Use --python=/path/to/python" +fi + +# Note that if the Python conditional here evaluates True we will exit +# with status 1 which is a shell 'false' value. +if ! $python -c 'import sys; sys.exit(sys.version_info < (2,4) or sys.version_info >= (3,))'; then + error_exit "Cannot use '$python', Python 2.4 or later is required." \ + "Note that Python 3 or later is not yet supported." \ + "Use --python=/path/to/python to specify a supported Python." +fi + +# The -B switch was added in Python 2.6. +# If it is supplied, compiled files are not written. +# Use it for Python versions which support it. +if $python -B -c 'import sys; sys.exit(0)' 2>/dev/null; then + python="$python -B" +fi + case "$cpu" in ppc) CPU_CFLAGS="-m32" @@ -1074,169 +1093,169 @@ cat << EOF Usage: configure [options] Options: [defaults in brackets after descriptions] +Standard options: + --help print this message + --prefix=PREFIX install in PREFIX [$prefix] + --interp-prefix=PREFIX where to find shared libraries, etc. + use %M for cpu name [$interp_prefix] + --target-list=LIST set target list (default: build everything) +$(echo Available targets: $default_target_list | \ + fold -s -w 53 | sed -e 's/^/ /') + +Advanced options (experts only): + --source-path=PATH path of source code [$source_path] + --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] + --cc=CC use C compiler CC [$cc] + --iasl=IASL use ACPI compiler IASL [$iasl] + --host-cc=CC use C compiler CC [$host_cc] for code run at + build time + --cxx=CXX use C++ compiler CXX [$cxx] + --objcc=OBJCC use Objective-C compiler OBJCC [$objcc] + --extra-cflags=CFLAGS append extra C compiler flags QEMU_CFLAGS + --extra-ldflags=LDFLAGS append extra linker flags LDFLAGS + --make=MAKE use specified make [$make] + --install=INSTALL use specified install [$install] + --python=PYTHON use specified python [$python] + --smbd=SMBD use specified smbd [$smbd] + --static enable static build [$static] + --mandir=PATH install man pages in PATH + --datadir=PATH install firmware in PATH$confsuffix + --docdir=PATH install documentation in PATH$confsuffix + --bindir=PATH install binaries in PATH + --libdir=PATH install libraries in PATH + --sysconfdir=PATH install config in PATH$confsuffix + --localstatedir=PATH install local state in PATH (set at runtime on win32) + --with-confsuffix=SUFFIX suffix for QEMU data inside datadir and sysconfdir [$confsuffix] + --enable-debug-tcg enable TCG debugging + --disable-debug-tcg disable TCG debugging (default) + --enable-debug-info enable debugging information (default) + --disable-debug-info disable debugging information + --enable-debug enable common debug build options + --enable-sparse enable sparse checker + --disable-sparse disable sparse checker (default) + --disable-strip disable stripping binaries + --disable-werror disable compilation abort on warning + --disable-sdl disable SDL + --enable-sdl enable SDL + --disable-gtk disable gtk UI + --enable-gtk enable gtk UI + --disable-virtfs disable VirtFS + --enable-virtfs enable VirtFS + --disable-vnc disable VNC + --enable-vnc enable VNC + --disable-cocoa disable Cocoa (Mac OS X only) + --enable-cocoa enable Cocoa (default on Mac OS X) + --audio-drv-list=LIST set audio drivers list: + Available drivers: $audio_possible_drivers + --block-drv-whitelist=L Same as --block-drv-rw-whitelist=L + --block-drv-rw-whitelist=L + set block driver read-write whitelist + (affects only QEMU, not qemu-img) + --block-drv-ro-whitelist=L + set block driver read-only whitelist + (affects only QEMU, not qemu-img) + --disable-xen disable xen backend driver support + --enable-xen enable xen backend driver support + --disable-xen-pci-passthrough + --enable-xen-pci-passthrough + --disable-brlapi disable BrlAPI + --enable-brlapi enable BrlAPI + --disable-vnc-tls disable TLS encryption for VNC server + --enable-vnc-tls enable TLS encryption for VNC server + --disable-vnc-sasl disable SASL encryption for VNC server + --enable-vnc-sasl enable SASL encryption for VNC server + --disable-vnc-jpeg disable JPEG lossy compression for VNC server + --enable-vnc-jpeg enable JPEG lossy compression for VNC server + --disable-vnc-png disable PNG compression for VNC server (default) + --enable-vnc-png enable PNG compression for VNC server + --disable-vnc-ws disable Websockets support for VNC server + --enable-vnc-ws enable Websockets support for VNC server + --disable-curses disable curses output + --enable-curses enable curses output + --disable-curl disable curl connectivity + --enable-curl enable curl connectivity + --disable-fdt disable fdt device tree + --enable-fdt enable fdt device tree + --disable-bluez disable bluez stack connectivity + --enable-bluez enable bluez stack connectivity + --disable-slirp disable SLIRP userspace network connectivity + --disable-kvm disable KVM acceleration support + --enable-kvm enable KVM acceleration support + --disable-rdma disable RDMA-based migration support + --enable-rdma enable RDMA-based migration support + --enable-tcg-interpreter enable TCG with bytecode interpreter (TCI) + --enable-system enable all system emulation targets + --disable-system disable all system emulation targets + --enable-user enable supported user emulation targets + --disable-user disable all user emulation targets + --enable-linux-user enable all linux usermode emulation targets + --disable-linux-user disable all linux usermode emulation targets + --enable-bsd-user enable all BSD usermode emulation targets + --disable-bsd-user disable all BSD usermode emulation targets + --enable-guest-base enable GUEST_BASE support for usermode + emulation targets + --disable-guest-base disable GUEST_BASE support + --enable-pie build Position Independent Executables + --disable-pie do not build Position Independent Executables + --fmod-lib path to FMOD library + --fmod-inc path to FMOD includes + --oss-lib path to OSS library + --enable-uname-release=R Return R for uname -r in usermode emulation + --cpu=CPU Build for host CPU [$cpu] + --disable-uuid disable uuid support + --enable-uuid enable uuid support + --disable-vde disable support for vde network + --enable-vde enable support for vde network + --disable-netmap disable support for netmap network + --enable-netmap enable support for netmap network + --disable-linux-aio disable Linux AIO support + --enable-linux-aio enable Linux AIO support + --disable-cap-ng disable libcap-ng support + --enable-cap-ng enable libcap-ng support + --disable-attr disables attr and xattr support + --enable-attr enable attr and xattr support + --disable-blobs disable installing provided firmware blobs + --enable-docs enable documentation build + --disable-docs disable documentation build + --disable-vhost-net disable vhost-net acceleration support + --enable-vhost-net enable vhost-net acceleration support + --enable-trace-backend=B Set trace backend + Available backends: $($python $source_path/scripts/tracetool.py --list-backends) + --with-trace-file=NAME Full PATH,NAME of file to store traces + Default:trace-<pid> + --disable-spice disable spice + --enable-spice enable spice + --enable-rbd enable building the rados block device (rbd) + --disable-libiscsi disable iscsi support + --enable-libiscsi enable iscsi support + --disable-smartcard-nss disable smartcard nss support + --enable-smartcard-nss enable smartcard nss support + --disable-libusb disable libusb (for usb passthrough) + --enable-libusb enable libusb (for usb passthrough) + --disable-usb-redir disable usb network redirection support + --enable-usb-redir enable usb network redirection support + --disable-guest-agent disable building of the QEMU Guest Agent + --enable-guest-agent enable building of the QEMU Guest Agent + --with-vss-sdk=SDK-path enable Windows VSS support in QEMU Guest Agent + --with-win-sdk=SDK-path path to Windows Platform SDK (to build VSS .tlb) + --disable-seccomp disable seccomp support + --enable-seccomp enables seccomp support + --with-coroutine=BACKEND coroutine backend. Supported options: + gthread, ucontext, sigaltstack, windows + --disable-coroutine-pool disable coroutine freelist (worse performance) + --enable-coroutine-pool enable coroutine freelist (better performance) + --enable-glusterfs enable GlusterFS backend + --disable-glusterfs disable GlusterFS backend + --enable-gcov enable test coverage analysis with gcov + --gcov=GCOV use specified gcov [$gcov_tool] + --enable-tpm enable TPM support + --disable-libssh2 disable ssh block device support + --enable-libssh2 enable ssh block device support + --disable-vhdx disables support for the Microsoft VHDX image format + --enable-vhdx enable support for the Microsoft VHDX image format + +NOTE: The object files are built at the place where configure is launched EOF -echo "Standard options:" -echo " --help print this message" -echo " --prefix=PREFIX install in PREFIX [$prefix]" -echo " --interp-prefix=PREFIX where to find shared libraries, etc." -echo " use %M for cpu name [$interp_prefix]" -echo " --target-list=LIST set target list (default: build everything)" -echo "Available targets: $default_target_list" | \ - fold -s -w 53 | sed -e 's/^/ /' -echo "" -echo "Advanced options (experts only):" -echo " --source-path=PATH path of source code [$source_path]" -echo " --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]" -echo " --cc=CC use C compiler CC [$cc]" -echo " --iasl=IASL use ACPI compiler IASL [$iasl]" -echo " --host-cc=CC use C compiler CC [$host_cc] for code run at" -echo " build time" -echo " --cxx=CXX use C++ compiler CXX [$cxx]" -echo " --objcc=OBJCC use Objective-C compiler OBJCC [$objcc]" -echo " --extra-cflags=CFLAGS append extra C compiler flags QEMU_CFLAGS" -echo " --extra-ldflags=LDFLAGS append extra linker flags LDFLAGS" -echo " --make=MAKE use specified make [$make]" -echo " --install=INSTALL use specified install [$install]" -echo " --python=PYTHON use specified python [$python]" -echo " --smbd=SMBD use specified smbd [$smbd]" -echo " --static enable static build [$static]" -echo " --mandir=PATH install man pages in PATH" -echo " --datadir=PATH install firmware in PATH$confsuffix" -echo " --docdir=PATH install documentation in PATH$confsuffix" -echo " --bindir=PATH install binaries in PATH" -echo " --libdir=PATH install libraries in PATH" -echo " --sysconfdir=PATH install config in PATH$confsuffix" -echo " --localstatedir=PATH install local state in PATH (set at runtime on win32)" -echo " --with-confsuffix=SUFFIX suffix for QEMU data inside datadir and sysconfdir [$confsuffix]" -echo " --enable-debug-tcg enable TCG debugging" -echo " --disable-debug-tcg disable TCG debugging (default)" -echo " --enable-debug-info enable debugging information (default)" -echo " --disable-debug-info disable debugging information" -echo " --enable-debug enable common debug build options" -echo " --enable-sparse enable sparse checker" -echo " --disable-sparse disable sparse checker (default)" -echo " --disable-strip disable stripping binaries" -echo " --disable-werror disable compilation abort on warning" -echo " --disable-sdl disable SDL" -echo " --enable-sdl enable SDL" -echo " --disable-gtk disable gtk UI" -echo " --enable-gtk enable gtk UI" -echo " --disable-virtfs disable VirtFS" -echo " --enable-virtfs enable VirtFS" -echo " --disable-vnc disable VNC" -echo " --enable-vnc enable VNC" -echo " --disable-cocoa disable Cocoa (Mac OS X only)" -echo " --enable-cocoa enable Cocoa (default on Mac OS X)" -echo " --audio-drv-list=LIST set audio drivers list:" -echo " Available drivers: $audio_possible_drivers" -echo " --block-drv-whitelist=L Same as --block-drv-rw-whitelist=L" -echo " --block-drv-rw-whitelist=L" -echo " set block driver read-write whitelist" -echo " (affects only QEMU, not qemu-img)" -echo " --block-drv-ro-whitelist=L" -echo " set block driver read-only whitelist" -echo " (affects only QEMU, not qemu-img)" -echo " --disable-xen disable xen backend driver support" -echo " --enable-xen enable xen backend driver support" -echo " --disable-xen-pci-passthrough" -echo " --enable-xen-pci-passthrough" -echo " --disable-brlapi disable BrlAPI" -echo " --enable-brlapi enable BrlAPI" -echo " --disable-vnc-tls disable TLS encryption for VNC server" -echo " --enable-vnc-tls enable TLS encryption for VNC server" -echo " --disable-vnc-sasl disable SASL encryption for VNC server" -echo " --enable-vnc-sasl enable SASL encryption for VNC server" -echo " --disable-vnc-jpeg disable JPEG lossy compression for VNC server" -echo " --enable-vnc-jpeg enable JPEG lossy compression for VNC server" -echo " --disable-vnc-png disable PNG compression for VNC server (default)" -echo " --enable-vnc-png enable PNG compression for VNC server" -echo " --disable-vnc-ws disable Websockets support for VNC server" -echo " --enable-vnc-ws enable Websockets support for VNC server" -echo " --disable-curses disable curses output" -echo " --enable-curses enable curses output" -echo " --disable-curl disable curl connectivity" -echo " --enable-curl enable curl connectivity" -echo " --disable-fdt disable fdt device tree" -echo " --enable-fdt enable fdt device tree" -echo " --disable-bluez disable bluez stack connectivity" -echo " --enable-bluez enable bluez stack connectivity" -echo " --disable-slirp disable SLIRP userspace network connectivity" -echo " --disable-kvm disable KVM acceleration support" -echo " --enable-kvm enable KVM acceleration support" -echo " --disable-rdma disable RDMA-based migration support" -echo " --enable-rdma enable RDMA-based migration support" -echo " --enable-tcg-interpreter enable TCG with bytecode interpreter (TCI)" -echo " --enable-system enable all system emulation targets" -echo " --disable-system disable all system emulation targets" -echo " --enable-user enable supported user emulation targets" -echo " --disable-user disable all user emulation targets" -echo " --enable-linux-user enable all linux usermode emulation targets" -echo " --disable-linux-user disable all linux usermode emulation targets" -echo " --enable-bsd-user enable all BSD usermode emulation targets" -echo " --disable-bsd-user disable all BSD usermode emulation targets" -echo " --enable-guest-base enable GUEST_BASE support for usermode" -echo " emulation targets" -echo " --disable-guest-base disable GUEST_BASE support" -echo " --enable-pie build Position Independent Executables" -echo " --disable-pie do not build Position Independent Executables" -echo " --fmod-lib path to FMOD library" -echo " --fmod-inc path to FMOD includes" -echo " --oss-lib path to OSS library" -echo " --enable-uname-release=R Return R for uname -r in usermode emulation" -echo " --cpu=CPU Build for host CPU [$cpu]" -echo " --disable-uuid disable uuid support" -echo " --enable-uuid enable uuid support" -echo " --disable-vde disable support for vde network" -echo " --enable-vde enable support for vde network" -echo " --disable-netmap disable support for netmap network" -echo " --enable-netmap enable support for netmap network" -echo " --disable-linux-aio disable Linux AIO support" -echo " --enable-linux-aio enable Linux AIO support" -echo " --disable-cap-ng disable libcap-ng support" -echo " --enable-cap-ng enable libcap-ng support" -echo " --disable-attr disables attr and xattr support" -echo " --enable-attr enable attr and xattr support" -echo " --disable-blobs disable installing provided firmware blobs" -echo " --enable-docs enable documentation build" -echo " --disable-docs disable documentation build" -echo " --disable-vhost-net disable vhost-net acceleration support" -echo " --enable-vhost-net enable vhost-net acceleration support" -echo " --enable-trace-backend=B Set trace backend" -echo " Available backends:" $($python "$source_path"/scripts/tracetool.py --list-backends) -echo " --with-trace-file=NAME Full PATH,NAME of file to store traces" -echo " Default:trace-<pid>" -echo " --disable-spice disable spice" -echo " --enable-spice enable spice" -echo " --enable-rbd enable building the rados block device (rbd)" -echo " --disable-libiscsi disable iscsi support" -echo " --enable-libiscsi enable iscsi support" -echo " --disable-smartcard-nss disable smartcard nss support" -echo " --enable-smartcard-nss enable smartcard nss support" -echo " --disable-libusb disable libusb (for usb passthrough)" -echo " --enable-libusb enable libusb (for usb passthrough)" -echo " --disable-usb-redir disable usb network redirection support" -echo " --enable-usb-redir enable usb network redirection support" -echo " --disable-guest-agent disable building of the QEMU Guest Agent" -echo " --enable-guest-agent enable building of the QEMU Guest Agent" -echo " --with-vss-sdk=SDK-path enable Windows VSS support in QEMU Guest Agent" -echo " --with-win-sdk=SDK-path path to Windows Platform SDK (to build VSS .tlb)" -echo " --disable-seccomp disable seccomp support" -echo " --enable-seccomp enables seccomp support" -echo " --with-coroutine=BACKEND coroutine backend. Supported options:" -echo " gthread, ucontext, sigaltstack, windows" -echo " --disable-coroutine-pool disable coroutine freelist (worse performance)" -echo " --enable-coroutine-pool enable coroutine freelist (better performance)" -echo " --enable-glusterfs enable GlusterFS backend" -echo " --disable-glusterfs disable GlusterFS backend" -echo " --enable-gcov enable test coverage analysis with gcov" -echo " --gcov=GCOV use specified gcov [$gcov_tool]" -echo " --enable-tpm enable TPM support" -echo " --disable-libssh2 disable ssh block device support" -echo " --enable-libssh2 enable ssh block device support" -echo " --disable-vhdx disables support for the Microsoft VHDX image format" -echo " --enable-vhdx enable support for the Microsoft VHDX image format" -echo "" -echo "NOTE: The object files are built at the place where configure is launched" exit 1 fi @@ -1419,25 +1438,6 @@ if test "$solaris" = "yes" ; then fi fi -if ! has $python; then - error_exit "Python not found. Use --python=/path/to/python" -fi - -# Note that if the Python conditional here evaluates True we will exit -# with status 1 which is a shell 'false' value. -if ! $python -c 'import sys; sys.exit(sys.version_info < (2,4) or sys.version_info >= (3,))'; then - error_exit "Cannot use '$python', Python 2.4 or later is required." \ - "Note that Python 3 or later is not yet supported." \ - "Use --python=/path/to/python to specify a supported Python." -fi - -# The -B switch was added in Python 2.6. -# If it is supplied, compiled files are not written. -# Use it for Python versions which support it. -if $python -B -c 'import sys; sys.exit(0)' 2>/dev/null; then - python="$python -B" -fi - if test -z "${target_list+xxx}" ; then target_list="$default_target_list" else |