diff options
-rw-r--r-- | hw/intc/arm_gicv3.c | 14 | ||||
-rw-r--r-- | hw/intc/arm_gicv3_common.c | 1 | ||||
-rw-r--r-- | hw/intc/arm_gicv3_cpuif.c | 7 | ||||
-rw-r--r-- | hw/intc/arm_gicv3_its.c | 23 | ||||
-rw-r--r-- | hw/intc/arm_gicv3_redist.c | 141 | ||||
-rw-r--r-- | hw/intc/gicv3_internal.h | 9 | ||||
-rw-r--r-- | include/hw/intc/arm_gicv3_common.h | 7 |
7 files changed, 200 insertions, 2 deletions
diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c index d63f8af604..3f24707838 100644 --- a/hw/intc/arm_gicv3.c +++ b/hw/intc/arm_gicv3.c @@ -165,6 +165,16 @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs) cs->hppi.grp = gicv3_irq_group(cs->gic, cs, cs->hppi.irq); } + if ((cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) && cs->gic->lpi_enable && + (cs->hpplpi.prio != 0xff)) { + if (irqbetter(cs, cs->hpplpi.irq, cs->hpplpi.prio)) { + cs->hppi.irq = cs->hpplpi.irq; + cs->hppi.prio = cs->hpplpi.prio; + cs->hppi.grp = cs->hpplpi.grp; + seenbetter = true; + } + } + /* If the best interrupt we just found would preempt whatever * was the previous best interrupt before this update, then * we know it's definitely the best one now. @@ -339,9 +349,13 @@ static void gicv3_set_irq(void *opaque, int irq, int level) static void arm_gicv3_post_load(GICv3State *s) { + int i; /* Recalculate our cached idea of the current highest priority * pending interrupt, but don't set IRQ or FIQ lines. */ + for (i = 0; i < s->num_cpu; i++) { + gicv3_redist_update_lpi(&s->cpu[i]); + } gicv3_full_update_noirqset(s); /* Repopulate the cache of GICv3CPUState pointers for target CPUs */ gicv3_cache_all_target_cpustates(s); diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index 53dea2a775..223db16fec 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -435,6 +435,7 @@ static void arm_gicv3_common_reset(DeviceState *dev) memset(cs->gicr_ipriorityr, 0, sizeof(cs->gicr_ipriorityr)); cs->hppi.prio = 0xff; + cs->hpplpi.prio = 0xff; /* State in the CPU interface must *not* be reset here, because it * is part of the CPU's reset domain, not the GIC device's. diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index a032d505f5..462a35f66e 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -899,10 +899,12 @@ static void icc_activate_irq(GICv3CPUState *cs, int irq) cs->gicr_iactiver0 = deposit32(cs->gicr_iactiver0, irq, 1, 1); cs->gicr_ipendr0 = deposit32(cs->gicr_ipendr0, irq, 1, 0); gicv3_redist_update(cs); - } else { + } else if (irq < GICV3_LPI_INTID_START) { gicv3_gicd_active_set(cs->gic, irq); gicv3_gicd_pending_clear(cs->gic, irq); gicv3_update(cs->gic, irq, 1); + } else { + gicv3_redist_lpi_pending(cs, irq, 0); } } @@ -1318,7 +1320,8 @@ static void icc_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri, trace_gicv3_icc_eoir_write(is_eoir0 ? 0 : 1, gicv3_redist_affid(cs), value); - if (irq >= cs->gic->num_irq) { + if ((irq >= cs->gic->num_irq) && + !(cs->gic->lpi_enable && (irq >= GICV3_LPI_INTID_START))) { /* This handles two cases: * 1. If software writes the ID of a spurious interrupt [ie 1020-1023] * to the GICC_EOIR, the GIC ignores that write. diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c index 9761b644f7..84bcbb5f56 100644 --- a/hw/intc/arm_gicv3_its.c +++ b/hw/intc/arm_gicv3_its.c @@ -233,6 +233,7 @@ static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset, uint64_t cte = 0; bool cte_valid = false; bool result = false; + uint64_t rdbase; if (cmd == NONE) { devid = offset; @@ -293,6 +294,18 @@ static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset, * Current implementation only supports rdbase == procnum * Hence rdbase physical address is ignored */ + rdbase = (cte & GITS_CTE_RDBASE_PROCNUM_MASK) >> 1U; + + if (rdbase > s->gicv3->num_cpu) { + return result; + } + + if ((cmd == CLEAR) || (cmd == DISCARD)) { + gicv3_redist_process_lpi(&s->gicv3->cpu[rdbase], pIntid, 0); + } else { + gicv3_redist_process_lpi(&s->gicv3->cpu[rdbase], pIntid, 1); + } + if (cmd == DISCARD) { IteEntry ite = {}; /* remove mapping from interrupt translation table */ @@ -621,6 +634,7 @@ static void process_cmdq(GICv3ITSState *s) MemTxResult res = MEMTX_OK; bool result = true; uint8_t cmd; + int i; if (!(s->ctlr & ITS_CTLR_ENABLED)) { return; @@ -685,6 +699,15 @@ static void process_cmdq(GICv3ITSState *s) break; case GITS_CMD_INV: case GITS_CMD_INVALL: + /* + * Current implementation doesn't cache any ITS tables, + * but the calculated lpi priority information. We only + * need to trigger lpi priority re-calculation to be in + * sync with LPI config table or pending table changes. + */ + for (i = 0; i < s->gicv3->num_cpu; i++) { + gicv3_redist_update_lpi(&s->gicv3->cpu[i]); + } break; default: break; diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c index 2108abfe9c..7072bfcbb1 100644 --- a/hw/intc/arm_gicv3_redist.c +++ b/hw/intc/arm_gicv3_redist.c @@ -254,6 +254,9 @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset, if (cs->gicr_typer & GICR_TYPER_PLPIS) { if (value & GICR_CTLR_ENABLE_LPIS) { cs->gicr_ctlr |= GICR_CTLR_ENABLE_LPIS; + /* Check for any pending interr in pending table */ + gicv3_redist_update_lpi(cs); + gicv3_redist_update(cs); } else { cs->gicr_ctlr &= ~GICR_CTLR_ENABLE_LPIS; } @@ -532,6 +535,144 @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data, return r; } +static void gicv3_redist_check_lpi_priority(GICv3CPUState *cs, int irq) +{ + AddressSpace *as = &cs->gic->dma_as; + uint64_t lpict_baddr; + uint8_t lpite; + uint8_t prio; + + lpict_baddr = cs->gicr_propbaser & R_GICR_PROPBASER_PHYADDR_MASK; + + address_space_read(as, lpict_baddr + ((irq - GICV3_LPI_INTID_START) * + sizeof(lpite)), MEMTXATTRS_UNSPECIFIED, &lpite, + sizeof(lpite)); + + if (!(lpite & LPI_CTE_ENABLED)) { + return; + } + + if (cs->gic->gicd_ctlr & GICD_CTLR_DS) { + prio = lpite & LPI_PRIORITY_MASK; + } else { + prio = ((lpite & LPI_PRIORITY_MASK) >> 1) | 0x80; + } + + if ((prio < cs->hpplpi.prio) || + ((prio == cs->hpplpi.prio) && (irq <= cs->hpplpi.irq))) { + cs->hpplpi.irq = irq; + cs->hpplpi.prio = prio; + /* LPIs are always non-secure Grp1 interrupts */ + cs->hpplpi.grp = GICV3_G1NS; + } +} + +void gicv3_redist_update_lpi(GICv3CPUState *cs) +{ + /* + * This function scans the LPI pending table and for each pending + * LPI, reads the corresponding entry from LPI configuration table + * to extract the priority info and determine if the current LPI + * priority is lower than the last computed high priority lpi interrupt. + * If yes, replace current LPI as the new high priority lpi interrupt. + */ + AddressSpace *as = &cs->gic->dma_as; + uint64_t lpipt_baddr; + uint32_t pendt_size = 0; + uint8_t pend; + int i, bit; + uint64_t idbits; + + idbits = MIN(FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, IDBITS), + GICD_TYPER_IDBITS); + + if (!(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) || !cs->gicr_propbaser || + !cs->gicr_pendbaser) { + return; + } + + cs->hpplpi.prio = 0xff; + + lpipt_baddr = cs->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK; + + /* Determine the highest priority pending interrupt among LPIs */ + pendt_size = (1ULL << (idbits + 1)); + + for (i = GICV3_LPI_INTID_START / 8; i < pendt_size / 8; i++) { + address_space_read(as, lpipt_baddr + i, MEMTXATTRS_UNSPECIFIED, &pend, + sizeof(pend)); + + while (pend) { + bit = ctz32(pend); + gicv3_redist_check_lpi_priority(cs, i * 8 + bit); + pend &= ~(1 << bit); + } + } +} + +void gicv3_redist_lpi_pending(GICv3CPUState *cs, int irq, int level) +{ + /* + * This function updates the pending bit in lpi pending table for + * the irq being activated or deactivated. + */ + AddressSpace *as = &cs->gic->dma_as; + uint64_t lpipt_baddr; + bool ispend = false; + uint8_t pend; + + /* + * get the bit value corresponding to this irq in the + * lpi pending table + */ + lpipt_baddr = cs->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK; + + address_space_read(as, lpipt_baddr + ((irq / 8) * sizeof(pend)), + MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend)); + + ispend = extract32(pend, irq % 8, 1); + + /* no change in the value of pending bit, return */ + if (ispend == level) { + return; + } + pend = deposit32(pend, irq % 8, 1, level ? 1 : 0); + + address_space_write(as, lpipt_baddr + ((irq / 8) * sizeof(pend)), + MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend)); + + /* + * check if this LPI is better than the current hpplpi, if yes + * just set hpplpi.prio and .irq without doing a full rescan + */ + if (level) { + gicv3_redist_check_lpi_priority(cs, irq); + } else { + if (irq == cs->hpplpi.irq) { + gicv3_redist_update_lpi(cs); + } + } +} + +void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq, int level) +{ + uint64_t idbits; + + idbits = MIN(FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, IDBITS), + GICD_TYPER_IDBITS); + + if (!(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) || !cs->gicr_propbaser || + !cs->gicr_pendbaser || (irq > (1ULL << (idbits + 1)) - 1) || + irq < GICV3_LPI_INTID_START) { + return; + } + + /* set/clear the pending bit for this irq */ + gicv3_redist_lpi_pending(cs, irq, level); + + gicv3_redist_update(cs); +} + void gicv3_redist_set_irq(GICv3CPUState *cs, int irq, int level) { /* Update redistributor state for a change in an external PPI input line */ diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index 530d1c1789..a0369dace7 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -140,6 +140,8 @@ FIELD(GICR_PENDBASER, PHYADDR, 16, 36) FIELD(GICR_PENDBASER, OUTERCACHE, 56, 3) FIELD(GICR_PENDBASER, PTZ, 62, 1) +#define GICR_PROPBASER_IDBITS_THRESHOLD 0xd + #define ICC_CTLR_EL1_CBPR (1U << 0) #define ICC_CTLR_EL1_EOIMODE (1U << 1) #define ICC_CTLR_EL1_PMHE (1U << 6) @@ -305,6 +307,9 @@ FIELD(GITS_TYPER, CIL, 36, 1) #define L1TABLE_ENTRY_SIZE 8 +#define LPI_CTE_ENABLED TABLE_ENTRY_VALID_MASK +#define LPI_PRIORITY_MASK 0xfc + #define GITS_CMDQ_ENTRY_SIZE 32 #define NUM_BYTES_IN_DW 8 @@ -397,6 +402,7 @@ FIELD(MAPC, RDBASE, 16, 32) * Valid = 1 bit,RDBase = 36 bits(considering max RDBASE) */ #define GITS_CTE_SIZE (0x8ULL) +#define GITS_CTE_RDBASE_PROCNUM_MASK MAKE_64BIT_MASK(1, RDBASE_PROCNUM_LENGTH) /* Special interrupt IDs */ #define INTID_SECURE 1020 @@ -455,6 +461,9 @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data, unsigned size, MemTxAttrs attrs); void gicv3_dist_set_irq(GICv3State *s, int irq, int level); void gicv3_redist_set_irq(GICv3CPUState *cs, int irq, int level); +void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq, int level); +void gicv3_redist_lpi_pending(GICv3CPUState *cs, int irq, int level); +void gicv3_redist_update_lpi(GICv3CPUState *cs); void gicv3_redist_send_sgi(GICv3CPUState *cs, int grp, int irq, bool ns); void gicv3_init_cpuif(GICv3State *s); diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index c1348cc60a..aa4f0d6770 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -204,6 +204,13 @@ struct GICv3CPUState { * real state above; it doesn't need to be migrated. */ PendingIrq hppi; + + /* + * Cached information recalculated from LPI tables + * in guest memory + */ + PendingIrq hpplpi; + /* This is temporary working state, to avoid a malloc in gicv3_update() */ bool seenbetter; }; |