diff options
-rw-r--r-- | MAINTAINERS | 2 | ||||
-rw-r--r-- | block-migration.c | 2 | ||||
-rw-r--r-- | block/qcow2.c | 2 | ||||
-rw-r--r-- | block/sheepdog.c | 90 | ||||
-rw-r--r-- | blockdev.c | 2 | ||||
-rwxr-xr-x | configure | 6 | ||||
-rw-r--r-- | console.c | 9 | ||||
-rw-r--r-- | cpus.c | 3 | ||||
-rw-r--r-- | exec.c | 10 | ||||
-rw-r--r-- | hw/armv7m.c | 4 | ||||
-rw-r--r-- | hw/lm32_sys.c | 2 | ||||
-rw-r--r-- | hw/lm32_timer.c | 4 | ||||
-rw-r--r-- | hw/lm32_uart.c | 4 | ||||
-rw-r--r-- | hw/milkymist-ac97.c | 4 | ||||
-rw-r--r-- | hw/milkymist-memcard.c | 4 | ||||
-rw-r--r-- | hw/milkymist-minimac2.c | 6 | ||||
-rw-r--r-- | hw/milkymist-pfpu.c | 4 | ||||
-rw-r--r-- | hw/milkymist-softusb.c | 8 | ||||
-rw-r--r-- | hw/milkymist-sysctl.c | 4 | ||||
-rw-r--r-- | hw/milkymist-tmu2.c | 8 | ||||
-rw-r--r-- | hw/qdev.c | 2 | ||||
-rw-r--r-- | hw/strongarm.c | 4 | ||||
-rw-r--r-- | hw/usb-ccid.c | 2 | ||||
-rw-r--r-- | hw/virtio-serial-bus.c | 10 | ||||
-rw-r--r-- | hw/virtio.c | 4 | ||||
-rw-r--r-- | net.c | 2 | ||||
-rw-r--r-- | net/socket.c | 6 | ||||
-rw-r--r-- | qemu-common.h | 5 | ||||
-rw-r--r-- | qemu-error.c | 2 | ||||
-rw-r--r-- | qemu-img.c | 12 |
30 files changed, 117 insertions, 110 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 35d4496186..6115e4ec08 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -480,7 +480,7 @@ S: Maintained F: tcg/ia64/ MIPS target -M: Aurelien Jarno <aurelien@aurel32.ne> +M: Aurelien Jarno <aurelien@aurel32.net> S: Maintained F: tcg/mips/ diff --git a/block-migration.c b/block-migration.c index 8d06a23649..0936c7d5ea 100644 --- a/block-migration.c +++ b/block-migration.c @@ -671,7 +671,7 @@ static int block_load(QEMUFile *f, void *opaque, int version_id) bs_prev = bs; total_sectors = bdrv_getlength(bs) >> BDRV_SECTOR_BITS; if (total_sectors <= 0) { - error_report("Error getting length of block device %s\n", + error_report("Error getting length of block device %s", device_name); return -EINVAL; } diff --git a/block/qcow2.c b/block/qcow2.c index 2c51e7ccbd..48e1b95689 100644 --- a/block/qcow2.c +++ b/block/qcow2.c @@ -936,7 +936,7 @@ static int qcow2_create2(const char *filename, int64_t total_size, (1 << cluster_bits) != cluster_size) { error_report( - "Cluster size must be a power of two between %d and %dk\n", + "Cluster size must be a power of two between %d and %dk", 1 << MIN_CLUSTER_BITS, 1 << (MAX_CLUSTER_BITS - 10)); return -EINVAL; } diff --git a/block/sheepdog.c b/block/sheepdog.c index 0392ca8c9c..80d106c2b2 100644 --- a/block/sheepdog.c +++ b/block/sheepdog.c @@ -444,18 +444,12 @@ static SheepdogAIOCB *sd_aio_setup(BlockDriverState *bs, QEMUIOVector *qiov, static int sd_schedule_bh(QEMUBHFunc *cb, SheepdogAIOCB *acb) { if (acb->bh) { - error_report("bug: %d %d\n", acb->aiocb_type, acb->aiocb_type); + error_report("bug: %d %d", acb->aiocb_type, acb->aiocb_type); return -EIO; } acb->bh = qemu_bh_new(cb, acb); - if (!acb->bh) { - error_report("oom: %d %d\n", acb->aiocb_type, acb->aiocb_type); - return -EIO; - } - qemu_bh_schedule(acb->bh); - return 0; } @@ -598,7 +592,7 @@ static int connect_to_sdog(const char *addr, const char *port) ret = getaddrinfo(addr, port, &hints, &res0); if (ret) { - error_report("unable to get address info %s, %s\n", + error_report("unable to get address info %s, %s", addr, strerror(errno)); return -1; } @@ -628,7 +622,7 @@ static int connect_to_sdog(const char *addr, const char *port) goto success; } fd = -1; - error_report("failed connect to %s:%s\n", addr, port); + error_report("failed connect to %s:%s", addr, port); success: freeaddrinfo(res0); return fd; @@ -644,7 +638,7 @@ again: if (errno == EINTR || errno == EAGAIN) { goto again; } - error_report("failed to recv a rsp, %s\n", strerror(errno)); + error_report("failed to recv a rsp, %s", strerror(errno)); return 1; } @@ -703,7 +697,7 @@ static int send_req(int sockfd, SheepdogReq *hdr, void *data, ret = do_writev(sockfd, iov, sizeof(*hdr) + *wlen, 0); if (ret) { - error_report("failed to send a req, %s\n", strerror(errno)); + error_report("failed to send a req, %s", strerror(errno)); ret = -1; } @@ -723,7 +717,7 @@ static int do_req(int sockfd, SheepdogReq *hdr, void *data, ret = do_read(sockfd, hdr, sizeof(*hdr)); if (ret) { - error_report("failed to get a rsp, %s\n", strerror(errno)); + error_report("failed to get a rsp, %s", strerror(errno)); ret = -1; goto out; } @@ -735,7 +729,7 @@ static int do_req(int sockfd, SheepdogReq *hdr, void *data, if (*rlen) { ret = do_read(sockfd, data, *rlen); if (ret) { - error_report("failed to get the data, %s\n", strerror(errno)); + error_report("failed to get the data, %s", strerror(errno)); ret = -1; goto out; } @@ -772,7 +766,7 @@ static void send_pending_req(BDRVSheepdogState *s, uint64_t oid, uint32_t id) ret = add_aio_request(s, aio_req, acb->qiov->iov, acb->qiov->niov, 0, acb->aiocb_type); if (ret < 0) { - error_report("add_aio_request is failed\n"); + error_report("add_aio_request is failed"); free_aio_req(s, aio_req); if (QLIST_EMPTY(&acb->aioreq_head)) { sd_finish_aiocb(acb); @@ -805,7 +799,7 @@ static void aio_read_response(void *opaque) /* read a header */ ret = do_read(fd, &rsp, sizeof(rsp)); if (ret) { - error_report("failed to get the header, %s\n", strerror(errno)); + error_report("failed to get the header, %s", strerror(errno)); return; } @@ -816,7 +810,7 @@ static void aio_read_response(void *opaque) } } if (!aio_req) { - error_report("cannot find aio_req %x\n", rsp.id); + error_report("cannot find aio_req %x", rsp.id); return; } @@ -852,7 +846,7 @@ static void aio_read_response(void *opaque) ret = do_readv(fd, acb->qiov->iov, rsp.data_length, aio_req->iov_offset); if (ret) { - error_report("failed to get the data, %s\n", strerror(errno)); + error_report("failed to get the data, %s", strerror(errno)); return; } break; @@ -860,7 +854,7 @@ static void aio_read_response(void *opaque) if (rsp.result != SD_RES_SUCCESS) { acb->ret = -EIO; - error_report("%s\n", sd_strerror(rsp.result)); + error_report("%s", sd_strerror(rsp.result)); } rest = free_aio_req(s, aio_req); @@ -917,7 +911,7 @@ static int get_sheep_fd(BDRVSheepdogState *s) fd = connect_to_sdog(s->addr, s->port); if (fd < 0) { - error_report("%s\n", strerror(errno)); + error_report("%s", strerror(errno)); return -1; } @@ -925,7 +919,7 @@ static int get_sheep_fd(BDRVSheepdogState *s) ret = set_nodelay(fd); if (ret) { - error_report("%s\n", strerror(errno)); + error_report("%s", strerror(errno)); closesocket(fd); return -1; } @@ -1041,7 +1035,7 @@ static int find_vdi_name(BDRVSheepdogState *s, char *filename, uint32_t snapid, } if (rsp->result != SD_RES_SUCCESS) { - error_report("cannot get vdi info, %s, %s %d %s\n", + error_report("cannot get vdi info, %s, %s %d %s", sd_strerror(rsp->result), filename, snapid, tag); ret = -1; goto out; @@ -1069,7 +1063,7 @@ static int add_aio_request(BDRVSheepdogState *s, AIOReq *aio_req, uint64_t old_oid = aio_req->base_oid; if (!nr_copies) { - error_report("bug\n"); + error_report("bug"); } memset(&hdr, 0, sizeof(hdr)); @@ -1102,14 +1096,14 @@ static int add_aio_request(BDRVSheepdogState *s, AIOReq *aio_req, /* send a header */ ret = do_write(s->fd, &hdr, sizeof(hdr)); if (ret) { - error_report("failed to send a req, %s\n", strerror(errno)); + error_report("failed to send a req, %s", strerror(errno)); return -EIO; } if (wlen) { ret = do_writev(s->fd, iov, wlen, aio_req->iov_offset); if (ret) { - error_report("failed to send a data, %s\n", strerror(errno)); + error_report("failed to send a data, %s", strerror(errno)); return -EIO; } } @@ -1151,7 +1145,7 @@ static int read_write_object(int fd, char *buf, uint64_t oid, int copies, ret = do_req(fd, (SheepdogReq *)&hdr, buf, &wlen, &rlen); if (ret) { - error_report("failed to send a request to the sheep\n"); + error_report("failed to send a request to the sheep"); return -1; } @@ -1159,7 +1153,7 @@ static int read_write_object(int fd, char *buf, uint64_t oid, int copies, case SD_RES_SUCCESS: return 0; default: - error_report("%s\n", sd_strerror(rsp->result)); + error_report("%s", sd_strerror(rsp->result)); return -1; } } @@ -1212,7 +1206,7 @@ static int sd_open(BlockDriverState *bs, const char *filename, int flags) fd = connect_to_sdog(s->addr, s->port); if (fd < 0) { - error_report("failed to connect\n"); + error_report("failed to connect"); goto out; } @@ -1281,7 +1275,7 @@ static int do_sd_create(char *filename, int64_t vdi_size, } if (rsp->result != SD_RES_SUCCESS) { - error_report("%s, %s\n", sd_strerror(rsp->result), filename); + error_report("%s, %s", sd_strerror(rsp->result), filename); return -EIO; } @@ -1308,7 +1302,7 @@ static int sd_create(const char *filename, QEMUOptionParameter *options) memset(vdi, 0, sizeof(vdi)); memset(tag, 0, sizeof(tag)); if (parse_vdiname(&s, filename, vdi, &snapid, tag) < 0) { - error_report("invalid filename\n"); + error_report("invalid filename"); return -EINVAL; } @@ -1322,7 +1316,7 @@ static int sd_create(const char *filename, QEMUOptionParameter *options) } if (vdi_size > SD_MAX_VDI_SIZE) { - error_report("too big image size\n"); + error_report("too big image size"); return -EINVAL; } @@ -1334,7 +1328,7 @@ static int sd_create(const char *filename, QEMUOptionParameter *options) /* Currently, only Sheepdog backing image is supported. */ drv = bdrv_find_protocol(backing_file); if (!drv || strcmp(drv->protocol_name, "sheepdog") != 0) { - error_report("backing_file must be a sheepdog image\n"); + error_report("backing_file must be a sheepdog image"); return -EINVAL; } @@ -1345,7 +1339,7 @@ static int sd_create(const char *filename, QEMUOptionParameter *options) s = bs->opaque; if (!is_snapshot(&s->inode)) { - error_report("cannot clone from a non snapshot vdi\n"); + error_report("cannot clone from a non snapshot vdi"); bdrv_delete(bs); return -EINVAL; } @@ -1385,7 +1379,7 @@ static void sd_close(BlockDriverState *bs) if (!ret && rsp->result != SD_RES_SUCCESS && rsp->result != SD_RES_VDI_NOT_LOCKED) { - error_report("%s, %s\n", sd_strerror(rsp->result), s->name); + error_report("%s, %s", sd_strerror(rsp->result), s->name); } qemu_aio_set_fd_handler(s->fd, NULL, NULL, NULL, NULL, NULL); @@ -1407,10 +1401,10 @@ static int sd_truncate(BlockDriverState *bs, int64_t offset) unsigned int datalen; if (offset < s->inode.vdi_size) { - error_report("shrinking is not supported\n"); + error_report("shrinking is not supported"); return -EINVAL; } else if (offset > SD_MAX_VDI_SIZE) { - error_report("too big image size\n"); + error_report("too big image size"); return -EINVAL; } @@ -1427,7 +1421,7 @@ static int sd_truncate(BlockDriverState *bs, int64_t offset) close(fd); if (ret < 0) { - error_report("failed to update an inode.\n"); + error_report("failed to update an inode."); return -EIO; } @@ -1500,7 +1494,7 @@ static int sd_create_branch(BDRVSheepdogState *s) fd = connect_to_sdog(s->addr, s->port); if (fd < 0) { - error_report("failed to connect\n"); + error_report("failed to connect"); goto out; } @@ -1618,7 +1612,7 @@ static void sd_readv_writev_bh_cb(void *p) ret = add_aio_request(s, aio_req, acb->qiov->iov, acb->qiov->niov, create, acb->aiocb_type); if (ret < 0) { - error_report("add_aio_request is failed\n"); + error_report("add_aio_request is failed"); free_aio_req(s, aio_req); acb->ret = -EIO; goto out; @@ -1695,7 +1689,7 @@ static int sd_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info) if (s->is_snapshot) { error_report("You can't create a snapshot of a snapshot VDI, " - "%s (%" PRIu32 ").\n", s->name, s->inode.vdi_id); + "%s (%" PRIu32 ").", s->name, s->inode.vdi_id); return -EINVAL; } @@ -1718,7 +1712,7 @@ static int sd_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info) ret = write_object(fd, (char *)&s->inode, vid_to_vdi_oid(s->inode.vdi_id), s->inode.nr_copies, datalen, 0, 0); if (ret < 0) { - error_report("failed to write snapshot's inode.\n"); + error_report("failed to write snapshot's inode."); ret = -EIO; goto cleanup; } @@ -1726,7 +1720,7 @@ static int sd_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info) ret = do_sd_create(s->name, s->inode.vdi_size, s->inode.vdi_id, &new_vid, 1, s->addr, s->port); if (ret < 0) { - error_report("failed to create inode for snapshot. %s\n", + error_report("failed to create inode for snapshot. %s", strerror(errno)); ret = -EIO; goto cleanup; @@ -1738,7 +1732,7 @@ static int sd_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info) s->inode.nr_copies, datalen, 0); if (ret < 0) { - error_report("failed to read new inode info. %s\n", strerror(errno)); + error_report("failed to read new inode info. %s", strerror(errno)); ret = -EIO; goto cleanup; } @@ -1777,14 +1771,14 @@ static int sd_snapshot_goto(BlockDriverState *bs, const char *snapshot_id) ret = find_vdi_name(s, vdi, snapid, tag, &vid, 1); if (ret) { - error_report("Failed to find_vdi_name\n"); + error_report("Failed to find_vdi_name"); ret = -ENOENT; goto out; } fd = connect_to_sdog(s->addr, s->port); if (fd < 0) { - error_report("failed to connect\n"); + error_report("failed to connect"); goto out; } @@ -1802,7 +1796,7 @@ static int sd_snapshot_goto(BlockDriverState *bs, const char *snapshot_id) memcpy(&s->inode, buf, sizeof(s->inode)); if (!s->inode.vm_state_size) { - error_report("Invalid snapshot\n"); + error_report("Invalid snapshot"); ret = -ENOENT; goto out; } @@ -1819,7 +1813,7 @@ out: qemu_free(buf); qemu_free(old_s); - error_report("failed to open. recover old bdrv_sd_state.\n"); + error_report("failed to open. recover old bdrv_sd_state."); return ret; } @@ -1874,7 +1868,7 @@ static int sd_snapshot_list(BlockDriverState *bs, QEMUSnapshotInfo **psn_tab) fd = connect_to_sdog(s->addr, s->port); if (fd < 0) { - error_report("failed to connect\n"); + error_report("failed to connect"); goto out; } @@ -1948,7 +1942,7 @@ static int do_load_save_vmstate(BDRVSheepdogState *s, uint8_t *data, } if (ret < 0) { - error_report("failed to save vmstate %s\n", strerror(errno)); + error_report("failed to save vmstate %s", strerror(errno)); ret = -EIO; goto cleanup; } diff --git a/blockdev.c b/blockdev.c index 1502575acb..7d579d6124 100644 --- a/blockdev.c +++ b/blockdev.c @@ -293,7 +293,7 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi) if ((buf = qemu_opt_get(opts, "trans")) != NULL) { if (!cyls) { - error_report("'%s' trans must be used with cyls,heads and secs", + error_report("'%s' trans must be used with cyls, heads and secs", buf); return NULL; } @@ -1640,7 +1640,7 @@ for drv in $audio_drv_list; do pa) audio_drv_probe $drv pulse/simple.h "-lpulse-simple -lpulse" \ - "pa_simple *s = NULL; pa_simple_free(s); return 0;" + "pa_simple *s = 0; pa_simple_free(s); return 0;" libs_softmmu="-lpulse -lpulse-simple $libs_softmmu" audio_pt_int="yes" ;; @@ -3483,7 +3483,9 @@ for bios_file in $source_path/pc-bios/*.bin $source_path/pc-bios/*.rom $source_p done mkdir -p $DIRS for f in $FILES ; do - test -e $f || symlink $source_path/$f $f + if [ -e "$source_path/$f" ] && ! [ -e "$f" ]; then + symlink "$source_path/$f" "$f" + fi done # temporary config to build submodules @@ -1349,8 +1349,15 @@ static struct DisplayAllocator default_allocator = { static void dumb_display_init(void) { DisplayState *ds = qemu_mallocz(sizeof(DisplayState)); + int width = 640; + int height = 480; + ds->allocator = &default_allocator; - ds->surface = qemu_create_displaysurface(ds, 640, 480); + if (is_fixedsize_console()) { + width = active_console->g_width; + height = active_console->g_height; + } + ds->surface = qemu_create_displaysurface(ds, width, height); register_displaystate(ds); } @@ -33,7 +33,10 @@ #include "qemu-thread.h" #include "cpus.h" + +#ifndef _WIN32 #include "compatfd.h" +#endif #ifdef SIGRTMIN #define SIG_IPI (SIGRTMIN+4) @@ -1207,12 +1207,16 @@ static inline void tb_alloc_page(TranslationBlock *tb, unsigned int n, tb_page_addr_t page_addr) { PageDesc *p; - TranslationBlock *last_first_tb; +#ifndef CONFIG_USER_ONLY + bool page_already_protected; +#endif tb->page_addr[n] = page_addr; p = page_find_alloc(page_addr >> TARGET_PAGE_BITS, 1); tb->page_next[n] = p->first_tb; - last_first_tb = p->first_tb; +#ifndef CONFIG_USER_ONLY + page_already_protected = p->first_tb != NULL; +#endif p->first_tb = (TranslationBlock *)((long)tb | n); invalidate_page_bitmap(p); @@ -1248,7 +1252,7 @@ static inline void tb_alloc_page(TranslationBlock *tb, /* if some code is already present, then the pages are already protected. So we handle the case where only the first TB is allocated in a physical page */ - if (!last_first_tb) { + if (!page_already_protected) { tlb_protect_code(page_addr); } #endif diff --git a/hw/armv7m.c b/hw/armv7m.c index 72d010a63b..83f3393eab 100644 --- a/hw/armv7m.c +++ b/hw/armv7m.c @@ -4,7 +4,7 @@ * Copyright (c) 2006-2007 CodeSourcery. * Written by Paul Brook * - * This code is licenced under the GPL. + * This code is licensed under the GPL. */ #include "sysbus.h" @@ -14,7 +14,7 @@ /* Bitbanded IO. Each word corresponds to a single bit. */ -/* Get the byte address of the real memory for a bitband acess. */ +/* Get the byte address of the real memory for a bitband access. */ static inline uint32_t bitband_addr(void * opaque, uint32_t addr) { uint32_t res; diff --git a/hw/lm32_sys.c b/hw/lm32_sys.c index 427b05fe1a..e5ff962f43 100644 --- a/hw/lm32_sys.c +++ b/hw/lm32_sys.c @@ -83,7 +83,7 @@ static void sys_write(void *opaque, target_phys_addr_t addr, uint32_t value) break; default: - error_report("lm32_sys: write access to unkown register 0x" + error_report("lm32_sys: write access to unknown register 0x" TARGET_FMT_plx, addr << 2); break; } diff --git a/hw/lm32_timer.c b/hw/lm32_timer.c index ed289847ac..49cbb22993 100644 --- a/hw/lm32_timer.c +++ b/hw/lm32_timer.c @@ -86,7 +86,7 @@ static uint32_t timer_read(void *opaque, target_phys_addr_t addr) r = (uint32_t)ptimer_get_count(s->ptimer); break; default: - error_report("lm32_timer: read access to unkown register 0x" + error_report("lm32_timer: read access to unknown register 0x" TARGET_FMT_plx, addr << 2); break; } @@ -124,7 +124,7 @@ static void timer_write(void *opaque, target_phys_addr_t addr, uint32_t value) TARGET_FMT_plx, addr << 2); break; default: - error_report("lm32_timer: write access to unkown register 0x" + error_report("lm32_timer: write access to unknown register 0x" TARGET_FMT_plx, addr << 2); break; } diff --git a/hw/lm32_uart.c b/hw/lm32_uart.c index e225087b99..09090e93b2 100644 --- a/hw/lm32_uart.c +++ b/hw/lm32_uart.c @@ -149,7 +149,7 @@ static uint32_t uart_read(void *opaque, target_phys_addr_t addr) TARGET_FMT_plx, addr << 2); break; default: - error_report("lm32_uart: read access to unkown register 0x" + error_report("lm32_uart: read access to unknown register 0x" TARGET_FMT_plx, addr << 2); break; } @@ -185,7 +185,7 @@ static void uart_write(void *opaque, target_phys_addr_t addr, uint32_t value) TARGET_FMT_plx, addr << 2); break; default: - error_report("lm32_uart: write access to unkown register 0x" + error_report("lm32_uart: write access to unknown register 0x" TARGET_FMT_plx, addr << 2); break; } diff --git a/hw/milkymist-ac97.c b/hw/milkymist-ac97.c index 6c9e318aa2..6104732f7d 100644 --- a/hw/milkymist-ac97.c +++ b/hw/milkymist-ac97.c @@ -103,7 +103,7 @@ static uint32_t ac97_read(void *opaque, target_phys_addr_t addr) break; default: - error_report("milkymist_ac97: read access to unkown register 0x" + error_report("milkymist_ac97: read access to unknown register 0x" TARGET_FMT_plx, addr << 2); break; } @@ -152,7 +152,7 @@ static void ac97_write(void *opaque, target_phys_addr_t addr, uint32_t value) break; default: - error_report("milkymist_ac97: write access to unkown register 0x" + error_report("milkymist_ac97: write access to unknown register 0x" TARGET_FMT_plx, addr); break; } diff --git a/hw/milkymist-memcard.c b/hw/milkymist-memcard.c index 06077af82a..22dc377d79 100644 --- a/hw/milkymist-memcard.c +++ b/hw/milkymist-memcard.c @@ -154,7 +154,7 @@ static uint32_t memcard_read(void *opaque, target_phys_addr_t addr) break; default: - error_report("milkymist_memcard: read access to unkown register 0x" + error_report("milkymist_memcard: read access to unknown register 0x" TARGET_FMT_plx, addr << 2); break; } @@ -210,7 +210,7 @@ static void memcard_write(void *opaque, target_phys_addr_t addr, uint32_t value) break; default: - error_report("milkymist_memcard: write access to unkown register 0x" + error_report("milkymist_memcard: write access to unknown register 0x" TARGET_FMT_plx, addr << 2); break; } diff --git a/hw/milkymist-minimac2.c b/hw/milkymist-minimac2.c index c4e28187b3..cd360264c1 100644 --- a/hw/milkymist-minimac2.c +++ b/hw/milkymist-minimac2.c @@ -234,20 +234,20 @@ static void minimac2_tx(MilkymistMinimac2State *s) uint8_t *buf = s->tx_buf; if (txcount < 64) { - error_report("milkymist_minimac2: ethernet frame too small (%u < %u)\n", + error_report("milkymist_minimac2: ethernet frame too small (%u < %u)", txcount, 64); goto err; } if (txcount > MINIMAC2_MTU) { - error_report("milkymist_minimac2: MTU exceeded (%u > %u)\n", + error_report("milkymist_minimac2: MTU exceeded (%u > %u)", txcount, MINIMAC2_MTU); goto err; } if (memcmp(buf, preamble_sfd, 8) != 0) { error_report("milkymist_minimac2: frame doesn't contain the preamble " - "and/or the SFD (%02x %02x %02x %02x %02x %02x %02x %02x)\n", + "and/or the SFD (%02x %02x %02x %02x %02x %02x %02x %02x)", buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); goto err; } diff --git a/hw/milkymist-pfpu.c b/hw/milkymist-pfpu.c index 94e631510f..306d1ce287 100644 --- a/hw/milkymist-pfpu.c +++ b/hw/milkymist-pfpu.c @@ -301,7 +301,7 @@ static int pfpu_decode_insn(MilkymistPFPUState *s) } break; default: - error_report("milkymist_pfpu: unknown opcode %d\n", op); + error_report("milkymist_pfpu: unknown opcode %d", op); break; } @@ -358,7 +358,7 @@ static void pfpu_start(MilkymistPFPUState *s) /* decode at most MICROCODE_WORDS instructions */ if (i++ >= MICROCODE_WORDS) { error_report("milkymist_pfpu: too many instructions " - "executed in microcode. No VECTOUT?\n"); + "executed in microcode. No VECTOUT?"); break; } } diff --git a/hw/milkymist-softusb.c b/hw/milkymist-softusb.c index 028f3b79ac..5ab35c3827 100644 --- a/hw/milkymist-softusb.c +++ b/hw/milkymist-softusb.c @@ -131,7 +131,7 @@ static inline void softusb_read_dmem(MilkymistSoftUsbState *s, { if (offset + len >= s->dmem_size) { error_report("milkymist_softusb: read dmem out of bounds " - "at offset 0x%x, len %d\n", offset, len); + "at offset 0x%x, len %d", offset, len); return; } @@ -143,7 +143,7 @@ static inline void softusb_write_dmem(MilkymistSoftUsbState *s, { if (offset + len >= s->dmem_size) { error_report("milkymist_softusb: write dmem out of bounds " - "at offset 0x%x, len %d\n", offset, len); + "at offset 0x%x, len %d", offset, len); return; } @@ -155,7 +155,7 @@ static inline void softusb_read_pmem(MilkymistSoftUsbState *s, { if (offset + len >= s->pmem_size) { error_report("milkymist_softusb: read pmem out of bounds " - "at offset 0x%x, len %d\n", offset, len); + "at offset 0x%x, len %d", offset, len); return; } @@ -167,7 +167,7 @@ static inline void softusb_write_pmem(MilkymistSoftUsbState *s, { if (offset + len >= s->pmem_size) { error_report("milkymist_softusb: write pmem out of bounds " - "at offset 0x%x, len %d\n", offset, len); + "at offset 0x%x, len %d", offset, len); return; } diff --git a/hw/milkymist-sysctl.c b/hw/milkymist-sysctl.c index 6bd0cb9740..7b2d544ac3 100644 --- a/hw/milkymist-sysctl.c +++ b/hw/milkymist-sysctl.c @@ -119,7 +119,7 @@ static uint32_t sysctl_read(void *opaque, target_phys_addr_t addr) break; default: - error_report("milkymist_sysctl: read access to unkown register 0x" + error_report("milkymist_sysctl: read access to unknown register 0x" TARGET_FMT_plx, addr << 2); break; } @@ -189,7 +189,7 @@ static void sysctl_write(void *opaque, target_phys_addr_t addr, uint32_t value) break; default: - error_report("milkymist_sysctl: write access to unkown register 0x" + error_report("milkymist_sysctl: write access to unknown register 0x" TARGET_FMT_plx, addr << 2); break; } diff --git a/hw/milkymist-tmu2.c b/hw/milkymist-tmu2.c index 9cebe3173b..790cdcb41c 100644 --- a/hw/milkymist-tmu2.c +++ b/hw/milkymist-tmu2.c @@ -352,21 +352,21 @@ static uint32_t tmu2_read(void *opaque, target_phys_addr_t addr) static void tmu2_check_registers(MilkymistTMU2State *s) { if (s->regs[R_BRIGHTNESS] > MAX_BRIGHTNESS) { - error_report("milkymist_tmu2: max brightness is %d\n", MAX_BRIGHTNESS); + error_report("milkymist_tmu2: max brightness is %d", MAX_BRIGHTNESS); } if (s->regs[R_ALPHA] > MAX_ALPHA) { - error_report("milkymist_tmu2: max alpha is %d\n", MAX_ALPHA); + error_report("milkymist_tmu2: max alpha is %d", MAX_ALPHA); } if (s->regs[R_VERTICESADDR] & 0x07) { error_report("milkymist_tmu2: vertex mesh address has to be 64-bit " - "aligned\n"); + "aligned"); } if (s->regs[R_TEXFBUF] & 0x01) { error_report("milkymist_tmu2: texture buffer address has to be " - "16-bit aligned\n"); + "16-bit aligned"); } } @@ -371,7 +371,7 @@ void qdev_init_nofail(DeviceState *dev) DeviceInfo *info = dev->info; if (qdev_init(dev) < 0) { - error_report("Initialization of device %s failed\n", info->name); + error_report("Initialization of device %s failed", info->name); exit(1); } } diff --git a/hw/strongarm.c b/hw/strongarm.c index de08bdf674..0e03d61a1f 100644 --- a/hw/strongarm.c +++ b/hw/strongarm.c @@ -1536,14 +1536,14 @@ StrongARMState *sa1110_init(unsigned int sdram_size, const char *rev) } if (strncmp(rev, "sa1110", 6)) { - error_report("Machine requires a SA1110 processor.\n"); + error_report("Machine requires a SA1110 processor."); exit(1); } s->env = cpu_init(rev); if (!s->env) { - error_report("Unable to find CPU definition\n"); + error_report("Unable to find CPU definition"); exit(1); } diff --git a/hw/usb-ccid.c b/hw/usb-ccid.c index 59c6431676..524b841da1 100644 --- a/hw/usb-ccid.c +++ b/hw/usb-ccid.c @@ -1240,7 +1240,7 @@ static int ccid_card_init(DeviceState *qdev, DeviceInfo *base) return -1; } if (s->card != NULL) { - error_report("Warning: usb-ccid card already full, not adding\n"); + error_report("Warning: usb-ccid card already full, not adding"); return -1; } ret = info->initfn ? info->initfn(card) : ret; diff --git a/hw/virtio-serial-bus.c b/hw/virtio-serial-bus.c index 9a12104982..bff4004bcc 100644 --- a/hw/virtio-serial-bus.c +++ b/hw/virtio-serial-bus.c @@ -337,7 +337,7 @@ static void handle_control_message(VirtIOSerial *vser, void *buf, size_t len) switch(cpkt.event) { case VIRTIO_CONSOLE_DEVICE_READY: if (!cpkt.value) { - error_report("virtio-serial-bus: Guest failure in adding device %s\n", + error_report("virtio-serial-bus: Guest failure in adding device %s", vser->bus.qbus.name); break; } @@ -352,7 +352,7 @@ static void handle_control_message(VirtIOSerial *vser, void *buf, size_t len) case VIRTIO_CONSOLE_PORT_READY: if (!cpkt.value) { - error_report("virtio-serial-bus: Guest failure in adding port %u for device %s\n", + error_report("virtio-serial-bus: Guest failure in adding port %u for device %s", port->id, vser->bus.qbus.name); break; } @@ -741,7 +741,7 @@ static int virtser_port_qdev_init(DeviceState *qdev, DeviceInfo *base) plugging_port0 = info->is_console && !find_port_by_id(port->vser, 0); if (find_port_by_id(port->vser, port->id)) { - error_report("virtio-serial-bus: A port already exists at id %u\n", + error_report("virtio-serial-bus: A port already exists at id %u", port->id); return -1; } @@ -752,7 +752,7 @@ static int virtser_port_qdev_init(DeviceState *qdev, DeviceInfo *base) } else { port->id = find_free_port_id(port->vser); if (port->id == VIRTIO_CONSOLE_BAD_ID) { - error_report("virtio-serial-bus: Maximum port limit for this device reached\n"); + error_report("virtio-serial-bus: Maximum port limit for this device reached"); return -1; } } @@ -760,7 +760,7 @@ static int virtser_port_qdev_init(DeviceState *qdev, DeviceInfo *base) max_nr_ports = tswap32(port->vser->config.max_nr_ports); if (port->id >= max_nr_ports) { - error_report("virtio-serial-bus: Out-of-range port id specified, max. allowed: %u\n", + error_report("virtio-serial-bus: Out-of-range port id specified, max. allowed: %u", max_nr_ports - 1); return -1; } diff --git a/hw/virtio.c b/hw/virtio.c index e6043de827..cc47a06a4e 100644 --- a/hw/virtio.c +++ b/hw/virtio.c @@ -797,7 +797,7 @@ int virtio_load(VirtIODevice *vdev, QEMUFile *f) /* Check it isn't doing very strange things with descriptor numbers. */ if (nheads > vdev->vq[i].vring.num) { error_report("VQ %d size 0x%x Guest index 0x%x " - "inconsistent with Host index 0x%x: delta 0x%x\n", + "inconsistent with Host index 0x%x: delta 0x%x", i, vdev->vq[i].vring.num, vring_avail_idx(&vdev->vq[i]), vdev->vq[i].last_avail_idx, nheads); @@ -805,7 +805,7 @@ int virtio_load(VirtIODevice *vdev, QEMUFile *f) } } else if (vdev->vq[i].last_avail_idx) { error_report("VQ %d address 0x0 " - "inconsistent with Host index 0x%x\n", + "inconsistent with Host index 0x%x", i, vdev->vq[i].last_avail_idx); return -1; } @@ -710,7 +710,7 @@ int qemu_find_nic_model(NICInfo *nd, const char * const *models, return i; } - error_report("qemu: Unsupported NIC model: %s", nd->model); + error_report("Unsupported NIC model: %s", nd->model); return -1; } diff --git a/net/socket.c b/net/socket.c index 7337f4fa10..bc1bf58894 100644 --- a/net/socket.c +++ b/net/socket.c @@ -530,7 +530,7 @@ int net_init_socket(QemuOpts *opts, qemu_opt_get(opts, "connect") || qemu_opt_get(opts, "mcast") || qemu_opt_get(opts, "localaddr")) { - error_report("listen=, connect=, mcast= and localaddr= is invalid with fd=\n"); + error_report("listen=, connect=, mcast= and localaddr= is invalid with fd="); return -1; } @@ -550,7 +550,7 @@ int net_init_socket(QemuOpts *opts, qemu_opt_get(opts, "connect") || qemu_opt_get(opts, "mcast") || qemu_opt_get(opts, "localaddr")) { - error_report("fd=, connect=, mcast= and localaddr= is invalid with listen=\n"); + error_report("fd=, connect=, mcast= and localaddr= is invalid with listen="); return -1; } @@ -566,7 +566,7 @@ int net_init_socket(QemuOpts *opts, qemu_opt_get(opts, "listen") || qemu_opt_get(opts, "mcast") || qemu_opt_get(opts, "localaddr")) { - error_report("fd=, listen=, mcast= and localaddr= is invalid with connect=\n"); + error_report("fd=, listen=, mcast= and localaddr= is invalid with connect="); return -1; } diff --git a/qemu-common.h b/qemu-common.h index 109498dd4d..abd7a75b72 100644 --- a/qemu-common.h +++ b/qemu-common.h @@ -112,11 +112,6 @@ static inline char *realpath(const char *path, char *resolved_path) _fullpath(resolved_path, path, _MAX_PATH); return resolved_path; } - -#define PRId64 "I64d" -#define PRIx64 "I64x" -#define PRIu64 "I64u" -#define PRIo64 "I64o" #endif /* FIXME: Remove NEED_CPU_H. */ diff --git a/qemu-error.c b/qemu-error.c index 41c191d528..4b20d283a2 100644 --- a/qemu-error.c +++ b/qemu-error.c @@ -193,6 +193,8 @@ void error_print_loc(void) /* * Print an error message to current monitor if we have one, else to stderr. + * Format arguments like sprintf(). The result should not contain + * newlines. * Prepend the current location and append a newline. * It's wrong to call this in a QMP monitor. Use qerror_report() there. */ diff --git a/qemu-img.c b/qemu-img.c index 4f162d1abe..32628b3110 100644 --- a/qemu-img.c +++ b/qemu-img.c @@ -304,11 +304,11 @@ static int img_create(int argc, char **argv) fmt = optarg; break; case 'e': - error_report("qemu-img: option -e is deprecated, please use \'-o " + error_report("option -e is deprecated, please use \'-o " "encryption\' instead!"); return 1; case '6': - error_report("qemu-img: option -6 is deprecated, please use \'-o " + error_report("option -6 is deprecated, please use \'-o " "compat6\' instead!"); return 1; case 'o': @@ -633,11 +633,11 @@ static int img_convert(int argc, char **argv) compress = 1; break; case 'e': - error_report("qemu-img: option -e is deprecated, please use \'-o " + error_report("option -e is deprecated, please use \'-o " "encryption\' instead!"); return 1; case '6': - error_report("qemu-img: option -6 is deprecated, please use \'-o " + error_report("option -6 is deprecated, please use \'-o " "compat6\' instead!"); return 1; case 'o': @@ -690,12 +690,12 @@ static int img_convert(int argc, char **argv) if (snapshot_name != NULL) { if (bs_n > 1) { - error_report("No support for concatenating multiple snapshot\n"); + error_report("No support for concatenating multiple snapshot"); ret = -1; goto out; } if (bdrv_snapshot_load_tmp(bs[0], snapshot_name) < 0) { - error_report("Failed to load snapshot\n"); + error_report("Failed to load snapshot"); ret = -1; goto out; } |