diff options
| -rw-r--r-- | hw/usb/dev-serial.c | 230 |
1 files changed, 126 insertions, 104 deletions
diff --git a/hw/usb/dev-serial.c b/hw/usb/dev-serial.c index b1622b7c7f..7a5fa3770e 100644 --- a/hw/usb/dev-serial.c +++ b/hw/usb/dev-serial.c @@ -33,72 +33,75 @@ do { printf("usb-serial: " fmt , ## __VA_ARGS__); } while (0) #define RECV_BUF (512 - (2 * 8)) /* Commands */ -#define FTDI_RESET 0 -#define FTDI_SET_MDM_CTRL 1 -#define FTDI_SET_FLOW_CTRL 2 -#define FTDI_SET_BAUD 3 -#define FTDI_SET_DATA 4 -#define FTDI_GET_MDM_ST 5 -#define FTDI_SET_EVENT_CHR 6 -#define FTDI_SET_ERROR_CHR 7 -#define FTDI_SET_LATENCY 9 -#define FTDI_GET_LATENCY 10 - -#define DeviceOutVendor ((USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_DEVICE)<<8) -#define DeviceInVendor ((USB_DIR_IN |USB_TYPE_VENDOR|USB_RECIP_DEVICE)<<8) +#define FTDI_RESET 0 +#define FTDI_SET_MDM_CTRL 1 +#define FTDI_SET_FLOW_CTRL 2 +#define FTDI_SET_BAUD 3 +#define FTDI_SET_DATA 4 +#define FTDI_GET_MDM_ST 5 +#define FTDI_SET_EVENT_CHR 6 +#define FTDI_SET_ERROR_CHR 7 +#define FTDI_SET_LATENCY 9 +#define FTDI_GET_LATENCY 10 + +#define DeviceOutVendor \ + ((USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE) << 8) +#define DeviceInVendor \ + ((USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE) << 8) /* RESET */ -#define FTDI_RESET_SIO 0 -#define FTDI_RESET_RX 1 -#define FTDI_RESET_TX 2 +#define FTDI_RESET_SIO 0 +#define FTDI_RESET_RX 1 +#define FTDI_RESET_TX 2 /* SET_MDM_CTRL */ -#define FTDI_DTR 1 -#define FTDI_SET_DTR (FTDI_DTR << 8) -#define FTDI_RTS 2 -#define FTDI_SET_RTS (FTDI_RTS << 8) +#define FTDI_DTR 1 +#define FTDI_SET_DTR (FTDI_DTR << 8) +#define FTDI_RTS 2 +#define FTDI_SET_RTS (FTDI_RTS << 8) /* SET_FLOW_CTRL */ -#define FTDI_RTS_CTS_HS 1 -#define FTDI_DTR_DSR_HS 2 -#define FTDI_XON_XOFF_HS 4 +#define FTDI_RTS_CTS_HS 1 +#define FTDI_DTR_DSR_HS 2 +#define FTDI_XON_XOFF_HS 4 /* SET_DATA */ -#define FTDI_PARITY (0x7 << 8) -#define FTDI_ODD (0x1 << 8) -#define FTDI_EVEN (0x2 << 8) -#define FTDI_MARK (0x3 << 8) -#define FTDI_SPACE (0x4 << 8) +#define FTDI_PARITY (0x7 << 8) +#define FTDI_ODD (0x1 << 8) +#define FTDI_EVEN (0x2 << 8) +#define FTDI_MARK (0x3 << 8) +#define FTDI_SPACE (0x4 << 8) -#define FTDI_STOP (0x3 << 11) -#define FTDI_STOP1 (0x0 << 11) -#define FTDI_STOP15 (0x1 << 11) -#define FTDI_STOP2 (0x2 << 11) +#define FTDI_STOP (0x3 << 11) +#define FTDI_STOP1 (0x0 << 11) +#define FTDI_STOP15 (0x1 << 11) +#define FTDI_STOP2 (0x2 << 11) /* GET_MDM_ST */ /* TODO: should be sent every 40ms */ -#define FTDI_CTS (1<<4) // CTS line status -#define FTDI_DSR (1<<5) // DSR line status -#define FTDI_RI (1<<6) // RI line status -#define FTDI_RLSD (1<<7) // Receive Line Signal Detect +#define FTDI_CTS (1 << 4) /* CTS line status */ +#define FTDI_DSR (1 << 5) /* DSR line status */ +#define FTDI_RI (1 << 6) /* RI line status */ +#define FTDI_RLSD (1 << 7) /* Receive Line Signal Detect */ /* Status */ -#define FTDI_DR (1<<0) // Data Ready -#define FTDI_OE (1<<1) // Overrun Err -#define FTDI_PE (1<<2) // Parity Err -#define FTDI_FE (1<<3) // Framing Err -#define FTDI_BI (1<<4) // Break Interrupt -#define FTDI_THRE (1<<5) // Transmitter Holding Register -#define FTDI_TEMT (1<<6) // Transmitter Empty -#define FTDI_FIFO (1<<7) // Error in FIFO +#define FTDI_DR (1 << 0) /* Data Ready */ +#define FTDI_OE (1 << 1) /* Overrun Err */ +#define FTDI_PE (1 << 2) /* Parity Err */ +#define FTDI_FE (1 << 3) /* Framing Err */ +#define FTDI_BI (1 << 4) /* Break Interrupt */ +#define FTDI_THRE (1 << 5) /* Transmitter Holding Register */ +#define FTDI_TEMT (1 << 6) /* Transmitter Empty */ +#define FTDI_FIFO (1 << 7) /* Error in FIFO */ struct USBSerialState { USBDevice dev; + USBEndpoint *intr; uint8_t recv_buf[RECV_BUF]; uint16_t recv_ptr; @@ -216,29 +219,34 @@ static uint8_t usb_get_modem_lines(USBSerialState *s) if (qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_GET_TIOCM, &flags) == -ENOTSUP) { - return FTDI_CTS|FTDI_DSR|FTDI_RLSD; + return FTDI_CTS | FTDI_DSR | FTDI_RLSD; } ret = 0; - if (flags & CHR_TIOCM_CTS) + if (flags & CHR_TIOCM_CTS) { ret |= FTDI_CTS; - if (flags & CHR_TIOCM_DSR) + } + if (flags & CHR_TIOCM_DSR) { ret |= FTDI_DSR; - if (flags & CHR_TIOCM_RI) + } + if (flags & CHR_TIOCM_RI) { ret |= FTDI_RI; - if (flags & CHR_TIOCM_CAR) + } + if (flags & CHR_TIOCM_CAR) { ret |= FTDI_RLSD; + } return ret; } static void usb_serial_handle_control(USBDevice *dev, USBPacket *p, - int request, int value, int index, int length, uint8_t *data) + int request, int value, int index, + int length, uint8_t *data) { USBSerialState *s = (USBSerialState *)dev; int ret; - DPRINTF("got control %x, value %x\n",request, value); + DPRINTF("got control %x, value %x\n", request, value); ret = usb_desc_handle_control(dev, p, request, value, index, length, data); if (ret >= 0) { return; @@ -248,7 +256,7 @@ static void usb_serial_handle_control(USBDevice *dev, USBPacket *p, case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: break; - /* Class specific requests. */ + /* Class specific requests. */ case DeviceOutVendor | FTDI_RESET: switch (value) { case FTDI_RESET_SIO: @@ -269,16 +277,18 @@ static void usb_serial_handle_control(USBDevice *dev, USBPacket *p, static int flags; qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_GET_TIOCM, &flags); if (value & FTDI_SET_RTS) { - if (value & FTDI_RTS) + if (value & FTDI_RTS) { flags |= CHR_TIOCM_RTS; - else + } else { flags &= ~CHR_TIOCM_RTS; + } } if (value & FTDI_SET_DTR) { - if (value & FTDI_DTR) + if (value & FTDI_DTR) { flags |= CHR_TIOCM_DTR; - else + } else { flags &= ~CHR_TIOCM_DTR; + } } qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_SET_TIOCM, &flags); break; @@ -293,10 +303,12 @@ static void usb_serial_handle_control(USBDevice *dev, USBPacket *p, int divisor = value & 0x3fff; /* chip special cases */ - if (divisor == 1 && subdivisor8 == 0) + if (divisor == 1 && subdivisor8 == 0) { subdivisor8 = 4; - if (divisor == 0 && subdivisor8 == 0) + } + if (divisor == 0 && subdivisor8 == 0) { divisor = 1; + } s->params.speed = (48000000 / 2) / (8 * divisor + subdivisor8); qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_SET_PARAMS, &s->params); @@ -304,30 +316,32 @@ static void usb_serial_handle_control(USBDevice *dev, USBPacket *p, } case DeviceOutVendor | FTDI_SET_DATA: switch (value & FTDI_PARITY) { - case 0: - s->params.parity = 'N'; - break; - case FTDI_ODD: - s->params.parity = 'O'; - break; - case FTDI_EVEN: - s->params.parity = 'E'; - break; - default: - DPRINTF("unsupported parity %d\n", value & FTDI_PARITY); - goto fail; + case 0: + s->params.parity = 'N'; + break; + case FTDI_ODD: + s->params.parity = 'O'; + break; + case FTDI_EVEN: + s->params.parity = 'E'; + break; + default: + DPRINTF("unsupported parity %d\n", value & FTDI_PARITY); + goto fail; } + switch (value & FTDI_STOP) { - case FTDI_STOP1: - s->params.stop_bits = 1; - break; - case FTDI_STOP2: - s->params.stop_bits = 2; - break; - default: - DPRINTF("unsupported stop bits %d\n", value & FTDI_STOP); - goto fail; + case FTDI_STOP1: + s->params.stop_bits = 1; + break; + case FTDI_STOP2: + s->params.stop_bits = 2; + break; + default: + DPRINTF("unsupported stop bits %d\n", value & FTDI_STOP); + goto fail; } + qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_SET_PARAMS, &s->params); /* TODO: TX ON/OFF */ break; @@ -423,20 +437,24 @@ static void usb_serial_handle_data(USBDevice *dev, USBPacket *p) switch (p->pid) { case USB_TOKEN_OUT: - if (devep != 2) + if (devep != 2) { goto fail; + } for (i = 0; i < p->iov.niov; i++) { iov = p->iov.iov + i; - /* XXX this blocks entire thread. Rewrite to use - * qemu_chr_fe_write and background I/O callbacks */ + /* + * XXX this blocks entire thread. Rewrite to use + * qemu_chr_fe_write and background I/O callbacks + */ qemu_chr_fe_write_all(&s->cs, iov->iov_base, iov->iov_len); } p->actual_length = p->iov.size; break; case USB_TOKEN_IN: - if (devep != 1) + if (devep != 1) { goto fail; + } usb_serial_token_in(s, p); break; @@ -464,21 +482,24 @@ static void usb_serial_read(void *opaque, const uint8_t *buf, int size) int first_size, start; /* room in the buffer? */ - if (size > (RECV_BUF - s->recv_used)) + if (size > (RECV_BUF - s->recv_used)) { size = RECV_BUF - s->recv_used; + } start = s->recv_ptr + s->recv_used; if (start < RECV_BUF) { /* copy data to end of buffer */ first_size = RECV_BUF - start; - if (first_size > size) + if (first_size > size) { first_size = size; + } memcpy(s->recv_buf + start, buf, first_size); /* wrap around to front if needed */ - if (size > first_size) + if (size > first_size) { memcpy(s->recv_buf, buf + first_size, size - first_size); + } } else { start -= RECV_BUF; memcpy(s->recv_buf + start, buf, size); @@ -493,23 +514,23 @@ static void usb_serial_event(void *opaque, QEMUChrEvent event) USBSerialState *s = opaque; switch (event) { - case CHR_EVENT_BREAK: - s->event_trigger |= FTDI_BI; - break; - case CHR_EVENT_OPENED: - if (!s->dev.attached) { - usb_device_attach(&s->dev, &error_abort); - } - break; - case CHR_EVENT_CLOSED: - if (s->dev.attached) { - usb_device_detach(&s->dev); - } - break; - case CHR_EVENT_MUX_IN: - case CHR_EVENT_MUX_OUT: - /* Ignore */ - break; + case CHR_EVENT_BREAK: + s->event_trigger |= FTDI_BI; + break; + case CHR_EVENT_OPENED: + if (!s->dev.attached) { + usb_device_attach(&s->dev, &error_abort); + } + break; + case CHR_EVENT_CLOSED: + if (s->dev.attached) { + usb_device_detach(&s->dev); + } + break; + case CHR_EVENT_MUX_IN: + case CHR_EVENT_MUX_OUT: + /* Ignore */ + break; } } @@ -549,8 +570,9 @@ static USBDevice *usb_braille_init(const char *unused) Chardev *cdrv; cdrv = qemu_chr_new("braille", "braille", NULL); - if (!cdrv) + if (!cdrv) { return NULL; + } dev = usb_new("usb-braille"); qdev_prop_set_chr(&dev->qdev, "chardev", cdrv); |