diff options
| -rw-r--r-- | hw/i2c/aspeed_i2c.c | 16 |
1 files changed, 12 insertions, 4 deletions
diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index c762c7366a..9a3a232fb8 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -52,6 +52,13 @@ #define I2CD_AC_TIMING_REG2 0x08 /* Clock and AC Timing Control #1 */ #define I2CD_INTR_CTRL_REG 0x0c /* I2CD Interrupt Control */ #define I2CD_INTR_STS_REG 0x10 /* I2CD Interrupt Status */ + +#define I2CD_INTR_SLAVE_ADDR_MATCH (0x1 << 31) /* 0: addr1 1: addr2 */ +#define I2CD_INTR_SLAVE_ADDR_RX_PENDING (0x1 << 30) +/* bits[19-16] Reserved */ + +/* All bits below are cleared by writing 1 */ +#define I2CD_INTR_SLAVE_INACTIVE_TIMEOUT (0x1 << 15) #define I2CD_INTR_SDA_DL_TIMEOUT (0x1 << 14) #define I2CD_INTR_BUS_RECOVER_DONE (0x1 << 13) #define I2CD_INTR_SMBUS_ALERT (0x1 << 12) /* Bus [0-3] only */ @@ -59,7 +66,7 @@ #define I2CD_INTR_SMBUS_DEV_ALERT_ADDR (0x1 << 10) /* Removed */ #define I2CD_INTR_SMBUS_DEF_ADDR (0x1 << 9) /* Removed */ #define I2CD_INTR_GCALL_ADDR (0x1 << 8) /* Removed */ -#define I2CD_INTR_SLAVE_MATCH (0x1 << 7) /* use RX_DONE */ +#define I2CD_INTR_SLAVE_ADDR_RX_MATCH (0x1 << 7) /* use RX_DONE */ #define I2CD_INTR_SCL_TIMEOUT (0x1 << 6) #define I2CD_INTR_ABNORMAL (0x1 << 5) #define I2CD_INTR_NORMAL_STOP (0x1 << 4) @@ -188,7 +195,6 @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) { bus->cmd &= ~0xFFFF; bus->cmd |= value & 0xFFFF; - bus->intr_status = 0; if (bus->cmd & I2CD_M_START_CMD) { uint8_t state = aspeed_i2c_get_state(bus) & I2CD_MACTIVE ? @@ -284,8 +290,10 @@ static void aspeed_i2c_bus_write(void *opaque, hwaddr offset, break; case I2CD_INTR_STS_REG: bus->intr_status &= ~(value & 0x7FFF); - bus->controller->intr_status &= ~(1 << bus->id); - qemu_irq_lower(bus->controller->irq); + if (!bus->intr_status) { + bus->controller->intr_status &= ~(1 << bus->id); + qemu_irq_lower(bus->controller->irq); + } break; case I2CD_DEV_ADDR_REG: qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n", |