aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rwxr-xr-xconfigure7
-rw-r--r--hw/ide/ahci.c89
-rw-r--r--hw/ide/ich.c1
-rw-r--r--hw/ide/macio.c489
-rw-r--r--include/glib-compat.h35
-rw-r--r--include/hw/ppc/mac_dbdma.h4
-rw-r--r--qtest.c138
-rw-r--r--tests/ahci-test.c328
-rw-r--r--tests/libqos/ahci.c38
-rw-r--r--tests/libqos/ahci.h3
-rw-r--r--tests/libqos/libqos.c85
-rw-r--r--tests/libqos/libqos.h2
-rw-r--r--tests/libqos/malloc.c74
-rw-r--r--tests/libqos/malloc.h1
-rw-r--r--tests/libqtest.c47
-rw-r--r--tests/libqtest.h49
16 files changed, 1031 insertions, 359 deletions
diff --git a/configure b/configure
index f758f32061..9852aef526 100755
--- a/configure
+++ b/configure
@@ -2779,12 +2779,7 @@ fi
##########################################
# glib support probe
-if test "$mingw32" = yes; then
- # g_poll is required in order to integrate with the glib main loop.
- glib_req_ver=2.20
-else
- glib_req_ver=2.12
-fi
+glib_req_ver=2.22
glib_modules=gthread-2.0
if test "$modules" = yes; then
glib_modules="$glib_modules gmodule-2.0"
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 833fd45faf..9e5d86297c 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -198,6 +198,61 @@ static void map_page(AddressSpace *as, uint8_t **ptr, uint64_t addr,
}
}
+/**
+ * Check the cmd register to see if we should start or stop
+ * the DMA or FIS RX engines.
+ *
+ * @ad: Device to engage.
+ * @allow_stop: Allow device to transition from started to stopped?
+ * 'no' is useful for migration post_load, which does not expect a transition.
+ *
+ * @return 0 on success, -1 on error.
+ */
+static int ahci_cond_start_engines(AHCIDevice *ad, bool allow_stop)
+{
+ AHCIPortRegs *pr = &ad->port_regs;
+
+ if (pr->cmd & PORT_CMD_START) {
+ if (ahci_map_clb_address(ad)) {
+ pr->cmd |= PORT_CMD_LIST_ON;
+ } else {
+ error_report("AHCI: Failed to start DMA engine: "
+ "bad command list buffer address");
+ return -1;
+ }
+ } else if (pr->cmd & PORT_CMD_LIST_ON) {
+ if (allow_stop) {
+ ahci_unmap_clb_address(ad);
+ pr->cmd = pr->cmd & ~(PORT_CMD_LIST_ON);
+ } else {
+ error_report("AHCI: DMA engine should be off, "
+ "but appears to still be running");
+ return -1;
+ }
+ }
+
+ if (pr->cmd & PORT_CMD_FIS_RX) {
+ if (ahci_map_fis_address(ad)) {
+ pr->cmd |= PORT_CMD_FIS_ON;
+ } else {
+ error_report("AHCI: Failed to start FIS receive engine: "
+ "bad FIS receive buffer address");
+ return -1;
+ }
+ } else if (pr->cmd & PORT_CMD_FIS_ON) {
+ if (allow_stop) {
+ ahci_unmap_fis_address(ad);
+ pr->cmd = pr->cmd & ~(PORT_CMD_FIS_ON);
+ } else {
+ error_report("AHCI: FIS receive engine should be off, "
+ "but appears to still be running");
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
static void ahci_port_write(AHCIState *s, int port, int offset, uint32_t val)
{
AHCIPortRegs *pr = &s->dev[port].port_regs;
@@ -229,29 +284,8 @@ static void ahci_port_write(AHCIState *s, int port, int offset, uint32_t val)
* including LIST_ON and FIS_ON. */
pr->cmd = (pr->cmd & PORT_CMD_RO_MASK) | (val & ~PORT_CMD_RO_MASK);
- if (pr->cmd & PORT_CMD_START) {
- if (ahci_map_clb_address(&s->dev[port])) {
- pr->cmd |= PORT_CMD_LIST_ON;
- } else {
- error_report("AHCI: Failed to start DMA engine: "
- "bad command list buffer address");
- }
- } else if (pr->cmd & PORT_CMD_LIST_ON) {
- ahci_unmap_clb_address(&s->dev[port]);
- pr->cmd = pr->cmd & ~(PORT_CMD_LIST_ON);
- }
-
- if (pr->cmd & PORT_CMD_FIS_RX) {
- if (ahci_map_fis_address(&s->dev[port])) {
- pr->cmd |= PORT_CMD_FIS_ON;
- } else {
- error_report("AHCI: Failed to start FIS receive engine: "
- "bad FIS receive buffer address");
- }
- } else if (pr->cmd & PORT_CMD_FIS_ON) {
- ahci_unmap_fis_address(&s->dev[port]);
- pr->cmd = pr->cmd & ~(PORT_CMD_FIS_ON);
- }
+ /* Check FIS RX and CLB engines, allow transition to false: */
+ ahci_cond_start_engines(&s->dev[port], true);
/* XXX usually the FIS would be pending on the bus here and
issuing deferred until the OS enables FIS receival.
@@ -1404,8 +1438,12 @@ static int ahci_state_post_load(void *opaque, int version_id)
for (i = 0; i < s->ports; i++) {
ad = &s->dev[i];
- ahci_map_clb_address(ad);
- ahci_map_fis_address(ad);
+ /* Only remap the CLB address if appropriate, disallowing a state
+ * transition from 'on' to 'off' it should be consistent here. */
+ if (ahci_cond_start_engines(ad, false) != 0) {
+ return -1;
+ }
+
/*
* If an error is present, ad->busy_slot will be valid and not -1.
* In this case, an operation is waiting to resume and will re-check
@@ -1461,7 +1499,6 @@ typedef struct SysbusAHCIState {
static const VMStateDescription vmstate_sysbus_ahci = {
.name = "sysbus-ahci",
- .unmigratable = 1, /* Still buggy under I/O load */
.fields = (VMStateField[]) {
VMSTATE_AHCI(ahci, SysbusAHCIState),
VMSTATE_END_OF_LIST()
diff --git a/hw/ide/ich.c b/hw/ide/ich.c
index b1d8874671..350c7f1c75 100644
--- a/hw/ide/ich.c
+++ b/hw/ide/ich.c
@@ -82,7 +82,6 @@
static const VMStateDescription vmstate_ich9_ahci = {
.name = "ich9_ahci",
- .unmigratable = 1, /* Still buggy under I/O load */
.version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_PCI_DEVICE(parent_obj, AHCIPCIState),
diff --git a/hw/ide/macio.c b/hw/ide/macio.c
index a009674f48..585a27bd6c 100644
--- a/hw/ide/macio.c
+++ b/hw/ide/macio.c
@@ -51,128 +51,261 @@ static const int debug_macio = 0;
#define MACIO_PAGE_SIZE 4096
-static void pmac_ide_atapi_transfer_cb(void *opaque, int ret)
+static void pmac_dma_read(BlockBackend *blk,
+ int64_t sector_num, int nb_sectors,
+ void (*cb)(void *opaque, int ret), void *opaque)
{
DBDMA_io *io = opaque;
MACIOIDEState *m = io->opaque;
IDEState *s = idebus_active_if(&m->bus);
- int unaligned;
+ dma_addr_t dma_addr, dma_len;
+ void *mem;
+ int nsector, remainder;
- if (ret < 0) {
- m->aiocb = NULL;
- qemu_sglist_destroy(&s->sg);
- ide_atapi_io_error(s, ret);
- io->remainder_len = 0;
- goto done;
+ qemu_iovec_destroy(&io->iov);
+ qemu_iovec_init(&io->iov, io->len / MACIO_PAGE_SIZE + 1);
+
+ if (io->remainder_len > 0) {
+ /* Return remainder of request */
+ int transfer = MIN(io->remainder_len, io->len);
+
+ MACIO_DPRINTF("--- DMA read pop - bounce addr: %p addr: %"
+ HWADDR_PRIx " remainder_len: %x\n",
+ &io->remainder + (0x200 - transfer), io->addr,
+ io->remainder_len);
+
+ cpu_physical_memory_write(io->addr,
+ &io->remainder + (0x200 - transfer),
+ transfer);
+
+ io->remainder_len -= transfer;
+ io->len -= transfer;
+ io->addr += transfer;
+
+ s->io_buffer_index += transfer;
+ s->io_buffer_size -= transfer;
+
+ if (io->remainder_len != 0) {
+ /* Still waiting for remainder */
+ return;
+ }
+
+ if (io->len == 0) {
+ MACIO_DPRINTF("--- finished all read processing; go and finish\n");
+ cb(opaque, 0);
+ return;
+ }
}
- if (!m->dma_active) {
- MACIO_DPRINTF("waiting for data (%#x - %#x - %x)\n",
- s->nsector, io->len, s->status);
- /* data not ready yet, wait for the channel to get restarted */
- io->processing = false;
- return;
+ if (s->drive_kind == IDE_CD) {
+ sector_num = (int64_t)(s->lba << 2) + (s->io_buffer_index >> 9);
+ } else {
+ sector_num = ide_get_sector(s) + (s->io_buffer_index >> 9);
}
- MACIO_DPRINTF("io_buffer_size = %#x\n", s->io_buffer_size);
+ nsector = ((io->len + 0x1ff) >> 9);
+ remainder = (nsector << 9) - io->len;
- if (s->io_buffer_size > 0) {
- m->aiocb = NULL;
- qemu_sglist_destroy(&s->sg);
+ MACIO_DPRINTF("--- DMA read transfer - addr: %" HWADDR_PRIx " len: %x\n",
+ io->addr, io->len);
- s->packet_transfer_size -= s->io_buffer_size;
+ dma_addr = io->addr;
+ dma_len = io->len;
+ mem = dma_memory_map(&address_space_memory, dma_addr, &dma_len,
+ DMA_DIRECTION_FROM_DEVICE);
- s->io_buffer_index += s->io_buffer_size;
- s->lba += s->io_buffer_index >> 11;
- s->io_buffer_index &= 0x7ff;
+ if (!remainder) {
+ MACIO_DPRINTF("--- DMA read aligned - addr: %" HWADDR_PRIx
+ " len: %x\n", io->addr, io->len);
+ qemu_iovec_add(&io->iov, mem, io->len);
+ } else {
+ MACIO_DPRINTF("--- DMA read unaligned - addr: %" HWADDR_PRIx
+ " len: %x\n", io->addr, io->len);
+ qemu_iovec_add(&io->iov, mem, io->len);
+
+ MACIO_DPRINTF("--- DMA read push - bounce addr: %p "
+ "remainder_len: %x\n",
+ &io->remainder + 0x200 - remainder, remainder);
+ qemu_iovec_add(&io->iov, &io->remainder + 0x200 - remainder,
+ remainder);
+
+ io->remainder_len = remainder;
}
- s->io_buffer_size = MIN(io->len, s->packet_transfer_size);
+ s->io_buffer_size -= io->len;
+ s->io_buffer_index += io->len;
- MACIO_DPRINTF("remainder: %d io->len: %d size: %d\n", io->remainder_len,
- io->len, s->packet_transfer_size);
- if (io->remainder_len && io->len) {
- /* guest wants the rest of its previous transfer */
- int remainder_len = MIN(io->remainder_len, io->len);
+ io->len = 0;
- MACIO_DPRINTF("copying remainder %d bytes\n", remainder_len);
+ MACIO_DPRINTF("--- Block read transfer - sector_num: %"PRIx64" "
+ "nsector: %x\n",
+ sector_num, nsector);
- cpu_physical_memory_write(io->addr, io->remainder + 0x200 -
- remainder_len, remainder_len);
+ m->aiocb = blk_aio_readv(blk, sector_num, &io->iov, nsector, cb, io);
+}
- io->addr += remainder_len;
- io->len -= remainder_len;
- s->io_buffer_size = remainder_len;
- io->remainder_len -= remainder_len;
- /* treat remainder as individual transfer, start again */
- qemu_sglist_init(&s->sg, DEVICE(m), io->len / MACIO_PAGE_SIZE + 1,
- &address_space_memory);
- pmac_ide_atapi_transfer_cb(opaque, 0);
- return;
- }
+static void pmac_dma_write(BlockBackend *blk,
+ int64_t sector_num, int nb_sectors,
+ void (*cb)(void *opaque, int ret), void *opaque)
+{
+ DBDMA_io *io = opaque;
+ MACIOIDEState *m = io->opaque;
+ IDEState *s = idebus_active_if(&m->bus);
+ dma_addr_t dma_addr, dma_len;
+ void *mem;
+ int nsector, remainder;
+ int extra = 0;
- if (!s->packet_transfer_size) {
- MACIO_DPRINTF("end of transfer\n");
- ide_atapi_cmd_ok(s);
- m->dma_active = false;
+ qemu_iovec_destroy(&io->iov);
+ qemu_iovec_init(&io->iov, io->len / MACIO_PAGE_SIZE + 1);
+
+ if (io->remainder_len > 0) {
+ /* Return remainder of request */
+ int transfer = MIN(io->remainder_len, io->len);
+
+ MACIO_DPRINTF("--- processing write remainder %x\n", transfer);
+ cpu_physical_memory_read(io->addr,
+ &io->remainder + (0x200 - transfer),
+ transfer);
+
+ io->remainder_len -= transfer;
+ io->len -= transfer;
+ io->addr += transfer;
+
+ s->io_buffer_index += transfer;
+ s->io_buffer_size -= transfer;
+
+ if (io->remainder_len != 0) {
+ /* Still waiting for remainder */
+ return;
+ }
+
+ MACIO_DPRINTF("--> prepending bounce buffer with size 0x200\n");
+
+ /* Sector transfer complete - prepend to request */
+ qemu_iovec_add(&io->iov, &io->remainder, 0x200);
+ extra = 1;
}
- if (io->len == 0) {
- MACIO_DPRINTF("end of DMA\n");
- goto done;
+ if (s->drive_kind == IDE_CD) {
+ sector_num = (int64_t)(s->lba << 2) + (s->io_buffer_index >> 9);
+ } else {
+ sector_num = ide_get_sector(s) + (s->io_buffer_index >> 9);
}
- /* launch next transfer */
+ nsector = (io->len >> 9);
+ remainder = io->len - (nsector << 9);
- /* handle unaligned accesses first, get them over with and only do the
- remaining bulk transfer using our async DMA helpers */
- unaligned = io->len & 0x1ff;
- if (unaligned) {
- int sector_num = (s->lba << 2) + (s->io_buffer_index >> 9);
- int nsector = io->len >> 9;
+ MACIO_DPRINTF("--- DMA write transfer - addr: %" HWADDR_PRIx " len: %x\n",
+ io->addr, io->len);
+ MACIO_DPRINTF("xxx remainder: %x\n", remainder);
+ MACIO_DPRINTF("xxx sector_num: %"PRIx64" nsector: %x\n",
+ sector_num, nsector);
- MACIO_DPRINTF("precopying unaligned %d bytes to %#" HWADDR_PRIx "\n",
- unaligned, io->addr + io->len - unaligned);
+ dma_addr = io->addr;
+ dma_len = io->len;
+ mem = dma_memory_map(&address_space_memory, dma_addr, &dma_len,
+ DMA_DIRECTION_TO_DEVICE);
- blk_read(s->blk, sector_num + nsector, io->remainder, 1);
- cpu_physical_memory_write(io->addr + io->len - unaligned,
- io->remainder, unaligned);
+ if (!remainder) {
+ MACIO_DPRINTF("--- DMA write aligned - addr: %" HWADDR_PRIx
+ " len: %x\n", io->addr, io->len);
+ qemu_iovec_add(&io->iov, mem, io->len);
+ } else {
+ /* Write up to last complete sector */
+ MACIO_DPRINTF("--- DMA write unaligned - addr: %" HWADDR_PRIx
+ " len: %x\n", io->addr, (nsector << 9));
+ qemu_iovec_add(&io->iov, mem, (nsector << 9));
+
+ MACIO_DPRINTF("--- DMA write read - bounce addr: %p "
+ "remainder_len: %x\n", &io->remainder, remainder);
+ cpu_physical_memory_read(io->addr + (nsector << 9), &io->remainder,
+ remainder);
+
+ io->remainder_len = 0x200 - remainder;
- io->len -= unaligned;
+ MACIO_DPRINTF("xxx remainder_len: %x\n", io->remainder_len);
}
- MACIO_DPRINTF("io->len = %#x\n", io->len);
+ s->io_buffer_size -= ((nsector + extra) << 9);
+ s->io_buffer_index += ((nsector + extra) << 9);
+
+ io->len = 0;
- qemu_sglist_init(&s->sg, DEVICE(m), io->len / MACIO_PAGE_SIZE + 1,
- &address_space_memory);
- qemu_sglist_add(&s->sg, io->addr, io->len);
- io->addr += s->io_buffer_size;
- io->remainder_len = MIN(s->packet_transfer_size - s->io_buffer_size,
- (0x200 - unaligned) & 0x1ff);
- MACIO_DPRINTF("set remainder to: %d\n", io->remainder_len);
+ MACIO_DPRINTF("--- Block write transfer - sector_num: %"PRIx64" "
+ "nsector: %x\n", sector_num, nsector + extra);
- /* We would read no data from the block layer, thus not get a callback.
- Just fake completion manually. */
- if (!io->len) {
- pmac_ide_atapi_transfer_cb(opaque, 0);
+ m->aiocb = blk_aio_writev(blk, sector_num, &io->iov, nsector + extra, cb,
+ io);
+}
+
+static void pmac_ide_atapi_transfer_cb(void *opaque, int ret)
+{
+ DBDMA_io *io = opaque;
+ MACIOIDEState *m = io->opaque;
+ IDEState *s = idebus_active_if(&m->bus);
+ int64_t sector_num;
+ int nsector, remainder;
+
+ MACIO_DPRINTF("\ns is %p\n", s);
+ MACIO_DPRINTF("io_buffer_index: %x\n", s->io_buffer_index);
+ MACIO_DPRINTF("io_buffer_size: %x packet_transfer_size: %x\n",
+ s->io_buffer_size, s->packet_transfer_size);
+ MACIO_DPRINTF("lba: %x\n", s->lba);
+ MACIO_DPRINTF("io_addr: %" HWADDR_PRIx " io_len: %x\n", io->addr,
+ io->len);
+
+ if (ret < 0) {
+ MACIO_DPRINTF("THERE WAS AN ERROR! %d\n", ret);
+ ide_atapi_io_error(s, ret);
+ goto done;
+ }
+
+ if (!m->dma_active) {
+ MACIO_DPRINTF("waiting for data (%#x - %#x - %x)\n",
+ s->nsector, io->len, s->status);
+ /* data not ready yet, wait for the channel to get restarted */
+ io->processing = false;
return;
}
- io->len = 0;
+ if (s->io_buffer_size <= 0) {
+ ide_atapi_cmd_ok(s);
+ m->dma_active = false;
+ goto done;
+ }
- MACIO_DPRINTF("sector_num=%d size=%d, cmd_cmd=%d\n",
- (s->lba << 2) + (s->io_buffer_index >> 9),
- s->packet_transfer_size, s->dma_cmd);
+ if (io->len == 0) {
+ MACIO_DPRINTF("End of DMA transfer\n");
+ goto done;
+ }
- m->aiocb = dma_blk_read(s->blk, &s->sg,
- (int64_t)(s->lba << 2) + (s->io_buffer_index >> 9),
- pmac_ide_atapi_transfer_cb, io);
+ if (s->lba == -1) {
+ /* Non-block ATAPI transfer - just copy to RAM */
+ s->io_buffer_size = MIN(s->io_buffer_size, io->len);
+ cpu_physical_memory_write(io->addr, s->io_buffer, s->io_buffer_size);
+ ide_atapi_cmd_ok(s);
+ m->dma_active = false;
+ goto done;
+ }
+
+ /* Calculate number of sectors */
+ sector_num = (int64_t)(s->lba << 2) + (s->io_buffer_index >> 9);
+ nsector = (io->len + 0x1ff) >> 9;
+ remainder = io->len & 0x1ff;
+
+ MACIO_DPRINTF("nsector: %d remainder: %x\n", nsector, remainder);
+ MACIO_DPRINTF("sector: %"PRIx64" %zx\n", sector_num, io->iov.size / 512);
+
+ pmac_dma_read(s->blk, sector_num, nsector, pmac_ide_atapi_transfer_cb, io);
return;
done:
- MACIO_DPRINTF("done DMA\n");
+ MACIO_DPRINTF("done DMA\n\n");
block_acct_done(blk_get_stats(s->blk), &s->acct);
io->dma_end(opaque);
+
+ return;
}
static void pmac_ide_transfer_cb(void *opaque, int ret)
@@ -180,24 +313,19 @@ static void pmac_ide_transfer_cb(void *opaque, int ret)
DBDMA_io *io = opaque;
MACIOIDEState *m = io->opaque;
IDEState *s = idebus_active_if(&m->bus);
- int n = 0;
int64_t sector_num;
- int unaligned;
+ int nsector, remainder;
+
+ MACIO_DPRINTF("pmac_ide_transfer_cb\n");
if (ret < 0) {
MACIO_DPRINTF("DMA error\n");
m->aiocb = NULL;
- qemu_sglist_destroy(&s->sg);
ide_dma_error(s);
io->remainder_len = 0;
goto done;
}
- if (--io->requests) {
- /* More requests still in flight */
- return;
- }
-
if (!m->dma_active) {
MACIO_DPRINTF("waiting for data (%#x - %#x - %x)\n",
s->nsector, io->len, s->status);
@@ -206,155 +334,48 @@ static void pmac_ide_transfer_cb(void *opaque, int ret)
return;
}
- sector_num = ide_get_sector(s);
- MACIO_DPRINTF("io_buffer_size = %#x\n", s->io_buffer_size);
- if (s->io_buffer_size > 0) {
- m->aiocb = NULL;
- qemu_sglist_destroy(&s->sg);
- n = (s->io_buffer_size + 0x1ff) >> 9;
- sector_num += n;
- ide_set_sector(s, sector_num);
- s->nsector -= n;
- }
-
- if (io->finish_remain_read) {
- /* Finish a stale read from the last iteration */
- io->finish_remain_read = false;
- cpu_physical_memory_write(io->finish_addr, io->remainder,
- io->finish_len);
- }
-
- MACIO_DPRINTF("remainder: %d io->len: %d nsector: %d "
- "sector_num: %" PRId64 "\n",
- io->remainder_len, io->len, s->nsector, sector_num);
- if (io->remainder_len && io->len) {
- /* guest wants the rest of its previous transfer */
- int remainder_len = MIN(io->remainder_len, io->len);
- uint8_t *p = &io->remainder[0x200 - remainder_len];
-
- MACIO_DPRINTF("copying remainder %d bytes at %#" HWADDR_PRIx "\n",
- remainder_len, io->addr);
-
- switch (s->dma_cmd) {
- case IDE_DMA_READ:
- cpu_physical_memory_write(io->addr, p, remainder_len);
- break;
- case IDE_DMA_WRITE:
- cpu_physical_memory_read(io->addr, p, remainder_len);
- break;
- case IDE_DMA_TRIM:
- break;
- }
- io->addr += remainder_len;
- io->len -= remainder_len;
- io->remainder_len -= remainder_len;
-
- if (s->dma_cmd == IDE_DMA_WRITE && !io->remainder_len) {
- io->requests++;
- qemu_iovec_reset(&io->iov);
- qemu_iovec_add(&io->iov, io->remainder, 0x200);
-
- m->aiocb = blk_aio_writev(s->blk, sector_num - 1, &io->iov, 1,
- pmac_ide_transfer_cb, io);
- }
- }
-
- if (s->nsector == 0 && !io->remainder_len) {
+ if (s->io_buffer_size <= 0) {
MACIO_DPRINTF("end of transfer\n");
s->status = READY_STAT | SEEK_STAT;
ide_set_irq(s->bus);
m->dma_active = false;
+ goto done;
}
if (io->len == 0) {
- MACIO_DPRINTF("end of DMA\n");
+ MACIO_DPRINTF("End of DMA transfer\n");
goto done;
}
- /* launch next transfer */
+ /* Calculate number of sectors */
+ sector_num = ide_get_sector(s) + (s->io_buffer_index >> 9);
+ nsector = (io->len + 0x1ff) >> 9;
+ remainder = io->len & 0x1ff;
- s->io_buffer_index = 0;
- s->io_buffer_size = MIN(io->len, s->nsector * 512);
-
- /* handle unaligned accesses first, get them over with and only do the
- remaining bulk transfer using our async DMA helpers */
- unaligned = io->len & 0x1ff;
- if (unaligned) {
- int nsector = io->len >> 9;
-
- MACIO_DPRINTF("precopying unaligned %d bytes to %#" HWADDR_PRIx "\n",
- unaligned, io->addr + io->len - unaligned);
-
- switch (s->dma_cmd) {
- case IDE_DMA_READ:
- io->requests++;
- io->finish_addr = io->addr + io->len - unaligned;
- io->finish_len = unaligned;
- io->finish_remain_read = true;
- qemu_iovec_reset(&io->iov);
- qemu_iovec_add(&io->iov, io->remainder, 0x200);
-
- m->aiocb = blk_aio_readv(s->blk, sector_num + nsector, &io->iov, 1,
- pmac_ide_transfer_cb, io);
- break;
- case IDE_DMA_WRITE:
- /* cache the contents in our io struct */
- cpu_physical_memory_read(io->addr + io->len - unaligned,
- io->remainder + io->remainder_len,
- unaligned);
- break;
- case IDE_DMA_TRIM:
- break;
- }
- }
-
- MACIO_DPRINTF("io->len = %#x\n", io->len);
-
- qemu_sglist_init(&s->sg, DEVICE(m), io->len / MACIO_PAGE_SIZE + 1,
- &address_space_memory);
- qemu_sglist_add(&s->sg, io->addr, io->len);
- io->addr += io->len + unaligned;
- io->remainder_len = (0x200 - unaligned) & 0x1ff;
- MACIO_DPRINTF("set remainder to: %d\n", io->remainder_len);
-
- /* Only subsector reads happening */
- if (!io->len) {
- if (!io->requests) {
- io->requests++;
- pmac_ide_transfer_cb(opaque, ret);
- }
- return;
- }
-
- io->len = 0;
+ s->nsector -= nsector;
- MACIO_DPRINTF("sector_num=%" PRId64 " n=%d, nsector=%d, cmd_cmd=%d\n",
- sector_num, n, s->nsector, s->dma_cmd);
+ MACIO_DPRINTF("nsector: %d remainder: %x\n", nsector, remainder);
+ MACIO_DPRINTF("sector: %"PRIx64" %x\n", sector_num, nsector);
switch (s->dma_cmd) {
case IDE_DMA_READ:
- m->aiocb = dma_blk_read(s->blk, &s->sg, sector_num,
- pmac_ide_transfer_cb, io);
+ pmac_dma_read(s->blk, sector_num, nsector, pmac_ide_transfer_cb, io);
break;
case IDE_DMA_WRITE:
- m->aiocb = dma_blk_write(s->blk, &s->sg, sector_num,
- pmac_ide_transfer_cb, io);
+ pmac_dma_write(s->blk, sector_num, nsector, pmac_ide_transfer_cb, io);
break;
case IDE_DMA_TRIM:
- m->aiocb = dma_blk_io(s->blk, &s->sg, sector_num,
- ide_issue_trim, pmac_ide_transfer_cb, io,
- DMA_DIRECTION_TO_DEVICE);
+ MACIO_DPRINTF("TRIM command issued!");
break;
}
- io->requests++;
return;
done:
if (s->dma_cmd == IDE_DMA_READ || s->dma_cmd == IDE_DMA_WRITE) {
block_acct_done(blk_get_stats(s->blk), &s->acct);
}
- io->dma_end(io);
+ io->dma_end(opaque);
}
static void pmac_ide_transfer(DBDMA_io *io)
@@ -364,31 +385,10 @@ static void pmac_ide_transfer(DBDMA_io *io)
MACIO_DPRINTF("\n");
- s->io_buffer_size = 0;
if (s->drive_kind == IDE_CD) {
-
- /* Handle non-block ATAPI DMA transfers */
- if (s->lba == -1) {
- s->io_buffer_size = MIN(io->len, s->packet_transfer_size);
- block_acct_start(blk_get_stats(s->blk), &s->acct, s->io_buffer_size,
- BLOCK_ACCT_READ);
- MACIO_DPRINTF("non-block ATAPI DMA transfer size: %d\n",
- s->io_buffer_size);
-
- /* Copy ATAPI buffer directly to RAM and finish */
- cpu_physical_memory_write(io->addr, s->io_buffer,
- s->io_buffer_size);
- ide_atapi_cmd_ok(s);
- m->dma_active = false;
-
- MACIO_DPRINTF("end of non-block ATAPI DMA transfer\n");
- block_acct_done(blk_get_stats(s->blk), &s->acct);
- io->dma_end(io);
- return;
- }
-
block_acct_start(blk_get_stats(s->blk), &s->acct, io->len,
BLOCK_ACCT_READ);
+
pmac_ide_atapi_transfer_cb(io, 0);
return;
}
@@ -406,7 +406,6 @@ static void pmac_ide_transfer(DBDMA_io *io)
break;
}
- io->requests++;
pmac_ide_transfer_cb(io, 0);
}
@@ -562,6 +561,30 @@ static void ide_dbdma_start(IDEDMA *dma, IDEState *s,
BlockCompletionFunc *cb)
{
MACIOIDEState *m = container_of(dma, MACIOIDEState, dma);
+ DBDMAState *dbdma = m->dbdma;
+ DBDMA_io *io;
+ int i;
+
+ s->io_buffer_index = 0;
+ if (s->drive_kind == IDE_CD) {
+ s->io_buffer_size = s->packet_transfer_size;
+ } else {
+ s->io_buffer_size = s->nsector * 0x200;
+ }
+
+ MACIO_DPRINTF("\n\n------------ IDE transfer\n");
+ MACIO_DPRINTF("buffer_size: %x buffer_index: %x\n",
+ s->io_buffer_size, s->io_buffer_index);
+ MACIO_DPRINTF("lba: %x size: %x\n", s->lba, s->io_buffer_size);
+ MACIO_DPRINTF("-------------------------\n");
+
+ for (i = 0; i < DBDMA_CHANNELS; i++) {
+ io = &dbdma->channels[i].io;
+
+ if (io->opaque == m) {
+ io->remainder_len = 0;
+ }
+ }
MACIO_DPRINTF("\n");
m->dma_active = true;
diff --git a/include/glib-compat.h b/include/glib-compat.h
index 28d9f15bd3..318e000368 100644
--- a/include/glib-compat.h
+++ b/include/glib-compat.h
@@ -23,14 +23,6 @@
#define G_TIME_SPAN_SECOND (G_GINT64_CONSTANT(1000000))
#endif
-#if !GLIB_CHECK_VERSION(2, 14, 0)
-static inline guint g_timeout_add_seconds(guint interval, GSourceFunc function,
- gpointer data)
-{
- return g_timeout_add(interval * 1000, function, data);
-}
-#endif
-
#if !GLIB_CHECK_VERSION(2, 28, 0)
static inline gint64 qemu_g_get_monotonic_time(void)
{
@@ -47,23 +39,6 @@ static inline gint64 qemu_g_get_monotonic_time(void)
#define g_get_monotonic_time() qemu_g_get_monotonic_time()
#endif
-#if !GLIB_CHECK_VERSION(2, 16, 0)
-static inline int g_strcmp0(const char *str1, const char *str2)
-{
- int result;
-
- if (!str1) {
- result = -(str1 != str2);
- } else if (!str2) {
- result = (str1 != str2);
- } else {
- result = strcmp(str1, str2);
- }
-
- return result;
-}
-#endif
-
#ifdef _WIN32
/*
* g_poll has a problem on Windows when using
@@ -71,16 +46,6 @@ static inline int g_strcmp0(const char *str1, const char *str2)
*/
#define g_poll(fds, nfds, timeout) g_poll_fixed(fds, nfds, timeout)
gint g_poll_fixed(GPollFD *fds, guint nfds, gint timeout);
-#elif !GLIB_CHECK_VERSION(2, 20, 0)
-/*
- * Glib before 2.20.0 doesn't implement g_poll, so wrap it to compile properly
- * on older systems.
- */
-static inline gint g_poll(GPollFD *fds, guint nfds, gint timeout)
-{
- GMainContext *ctx = g_main_context_default();
- return g_main_context_get_poll_func(ctx)(fds, nfds, timeout);
-}
#endif
#if !GLIB_CHECK_VERSION(2, 31, 0)
diff --git a/include/hw/ppc/mac_dbdma.h b/include/hw/ppc/mac_dbdma.h
index d7db06c031..c5803279da 100644
--- a/include/hw/ppc/mac_dbdma.h
+++ b/include/hw/ppc/mac_dbdma.h
@@ -43,10 +43,6 @@ struct DBDMA_io {
uint8_t remainder[0x200];
int remainder_len;
QEMUIOVector iov;
- bool finish_remain_read;
- hwaddr finish_addr;
- hwaddr finish_len;
- int requests;
};
/*
diff --git a/qtest.c b/qtest.c
index 8d1e66caa3..05cefd2800 100644
--- a/qtest.c
+++ b/qtest.c
@@ -119,12 +119,24 @@ static bool qtest_opened;
* > write ADDR SIZE DATA
* < OK
*
+ * > b64read ADDR SIZE
+ * < OK B64_DATA
+ *
+ * > b64write ADDR SIZE B64_DATA
+ * < OK
+ *
+ * > memset ADDR SIZE VALUE
+ * < OK
+ *
* ADDR, SIZE, VALUE are all integers parsed with strtoul() with a base of 0.
*
* DATA is an arbitrarily long hex number prefixed with '0x'. If it's smaller
* than the expected size, the value will be zero filled at the end of the data
* sequence.
*
+ * B64_DATA is an arbitrarily long base64 encoded string.
+ * If the sizes do not match, the data will be truncated.
+ *
* IRQ management:
*
* > irq_intercept_in QOM-PATH
@@ -182,23 +194,46 @@ static void qtest_send_prefix(CharDriverState *chr)
(long) tv.tv_sec, (long) tv.tv_usec);
}
-static void GCC_FMT_ATTR(2, 3) qtest_send(CharDriverState *chr,
- const char *fmt, ...)
+static void GCC_FMT_ATTR(1, 2) qtest_log_send(const char *fmt, ...)
{
va_list ap;
- char buffer[1024];
- size_t len;
+
+ if (!qtest_log_fp || !qtest_opened) {
+ return;
+ }
+
+ qtest_send_prefix(NULL);
va_start(ap, fmt);
- len = vsnprintf(buffer, sizeof(buffer), fmt, ap);
+ vfprintf(qtest_log_fp, fmt, ap);
va_end(ap);
+}
- qemu_chr_fe_write_all(chr, (uint8_t *)buffer, len);
+static void do_qtest_send(CharDriverState *chr, const char *str, size_t len)
+{
+ qemu_chr_fe_write_all(chr, (uint8_t *)str, len);
if (qtest_log_fp && qtest_opened) {
- fprintf(qtest_log_fp, "%s", buffer);
+ fprintf(qtest_log_fp, "%s", str);
}
}
+static void qtest_send(CharDriverState *chr, const char *str)
+{
+ do_qtest_send(chr, str, strlen(str));
+}
+
+static void GCC_FMT_ATTR(2, 3) qtest_sendf(CharDriverState *chr,
+ const char *fmt, ...)
+{
+ va_list ap;
+ gchar *buffer;
+
+ va_start(ap, fmt);
+ buffer = g_strdup_vprintf(fmt, ap);
+ qtest_send(chr, buffer);
+ va_end(ap);
+}
+
static void qtest_irq_handler(void *opaque, int n, int level)
{
qemu_irq old_irq = *(qemu_irq *)opaque;
@@ -208,8 +243,8 @@ static void qtest_irq_handler(void *opaque, int n, int level)
CharDriverState *chr = qtest_chr;
irq_levels[n] = level;
qtest_send_prefix(chr);
- qtest_send(chr, "IRQ %s %d\n",
- level ? "raise" : "lower", n);
+ qtest_sendf(chr, "IRQ %s %d\n",
+ level ? "raise" : "lower", n);
}
}
@@ -318,7 +353,7 @@ static void qtest_process_command(CharDriverState *chr, gchar **words)
value = cpu_inl(addr);
}
qtest_send_prefix(chr);
- qtest_send(chr, "OK 0x%04x\n", value);
+ qtest_sendf(chr, "OK 0x%04x\n", value);
} else if (strcmp(words[0], "writeb") == 0 ||
strcmp(words[0], "writew") == 0 ||
strcmp(words[0], "writel") == 0 ||
@@ -375,10 +410,11 @@ static void qtest_process_command(CharDriverState *chr, gchar **words)
tswap64s(&value);
}
qtest_send_prefix(chr);
- qtest_send(chr, "OK 0x%016" PRIx64 "\n", value);
+ qtest_sendf(chr, "OK 0x%016" PRIx64 "\n", value);
} else if (strcmp(words[0], "read") == 0) {
uint64_t addr, len, i;
uint8_t *data;
+ char *enc;
g_assert(words[1] && words[2]);
addr = strtoull(words[1], NULL, 0);
@@ -387,14 +423,33 @@ static void qtest_process_command(CharDriverState *chr, gchar **words)
data = g_malloc(len);
cpu_physical_memory_read(addr, data, len);
- qtest_send_prefix(chr);
- qtest_send(chr, "OK 0x");
+ enc = g_malloc(2 * len + 1);
for (i = 0; i < len; i++) {
- qtest_send(chr, "%02x", data[i]);
+ sprintf(&enc[i * 2], "%02x", data[i]);
}
- qtest_send(chr, "\n");
+
+ qtest_send_prefix(chr);
+ qtest_sendf(chr, "OK 0x%s\n", enc);
g_free(data);
+ g_free(enc);
+ } else if (strcmp(words[0], "b64read") == 0) {
+ uint64_t addr, len;
+ uint8_t *data;
+ gchar *b64_data;
+
+ g_assert(words[1] && words[2]);
+ addr = strtoull(words[1], NULL, 0);
+ len = strtoull(words[2], NULL, 0);
+
+ data = g_malloc(len);
+ cpu_physical_memory_read(addr, data, len);
+ b64_data = g_base64_encode(data, len);
+ qtest_send_prefix(chr);
+ qtest_sendf(chr, "OK %s\n", b64_data);
+
+ g_free(data);
+ g_free(b64_data);
} else if (strcmp(words[0], "write") == 0) {
uint64_t addr, len, i;
uint8_t *data;
@@ -424,6 +479,51 @@ static void qtest_process_command(CharDriverState *chr, gchar **words)
qtest_send_prefix(chr);
qtest_send(chr, "OK\n");
+ } else if (strcmp(words[0], "memset") == 0) {
+ uint64_t addr, len;
+ uint8_t *data;
+ uint8_t pattern;
+
+ g_assert(words[1] && words[2] && words[3]);
+ addr = strtoull(words[1], NULL, 0);
+ len = strtoull(words[2], NULL, 0);
+ pattern = strtoull(words[3], NULL, 0);
+
+ data = g_malloc(len);
+ memset(data, pattern, len);
+ cpu_physical_memory_write(addr, data, len);
+ g_free(data);
+
+ qtest_send_prefix(chr);
+ qtest_send(chr, "OK\n");
+ } else if (strcmp(words[0], "b64write") == 0) {
+ uint64_t addr, len;
+ uint8_t *data;
+ size_t data_len;
+ gsize out_len;
+
+ g_assert(words[1] && words[2] && words[3]);
+ addr = strtoull(words[1], NULL, 0);
+ len = strtoull(words[2], NULL, 0);
+
+ data_len = strlen(words[3]);
+ if (data_len < 3) {
+ qtest_send(chr, "ERR invalid argument size\n");
+ return;
+ }
+
+ data = g_base64_decode_inplace(words[3], &out_len);
+ if (out_len != len) {
+ qtest_log_send("b64write: data length mismatch (told %"PRIu64", "
+ "found %zu)\n",
+ len, out_len);
+ out_len = MIN(out_len, len);
+ }
+
+ cpu_physical_memory_write(addr, data, out_len);
+
+ qtest_send_prefix(chr);
+ qtest_send(chr, "OK\n");
} else if (qtest_enabled() && strcmp(words[0], "clock_step") == 0) {
int64_t ns;
@@ -434,7 +534,8 @@ static void qtest_process_command(CharDriverState *chr, gchar **words)
}
qtest_clock_warp(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + ns);
qtest_send_prefix(chr);
- qtest_send(chr, "OK %"PRIi64"\n", (int64_t)qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
+ qtest_sendf(chr, "OK %"PRIi64"\n",
+ (int64_t)qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
} else if (qtest_enabled() && strcmp(words[0], "clock_set") == 0) {
int64_t ns;
@@ -442,10 +543,11 @@ static void qtest_process_command(CharDriverState *chr, gchar **words)
ns = strtoll(words[1], NULL, 0);
qtest_clock_warp(ns);
qtest_send_prefix(chr);
- qtest_send(chr, "OK %"PRIi64"\n", (int64_t)qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
+ qtest_sendf(chr, "OK %"PRIi64"\n",
+ (int64_t)qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
} else {
qtest_send_prefix(chr);
- qtest_send(chr, "FAIL Unknown command `%s'\n", words[0]);
+ qtest_sendf(chr, "FAIL Unknown command '%s'\n", words[0]);
}
}
diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index 7c23bb2180..6e3fa819e0 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -97,6 +97,72 @@ static void generate_pattern(void *buffer, size_t len, size_t cycle_len)
}
}
+/**
+ * Verify that the transfer did not corrupt our state at all.
+ */
+static void verify_state(AHCIQState *ahci)
+{
+ int i, j;
+ uint32_t ahci_fingerprint;
+ uint64_t hba_base;
+ uint64_t hba_stored;
+ AHCICommandHeader cmd;
+
+ ahci_fingerprint = qpci_config_readl(ahci->dev, PCI_VENDOR_ID);
+ g_assert_cmphex(ahci_fingerprint, ==, ahci->fingerprint);
+
+ /* If we haven't initialized, this is as much as can be validated. */
+ if (!ahci->hba_base) {
+ return;
+ }
+
+ hba_base = (uint64_t)qpci_config_readl(ahci->dev, PCI_BASE_ADDRESS_5);
+ hba_stored = (uint64_t)(uintptr_t)ahci->hba_base;
+ g_assert_cmphex(hba_base, ==, hba_stored);
+
+ g_assert_cmphex(ahci_rreg(ahci, AHCI_CAP), ==, ahci->cap);
+ g_assert_cmphex(ahci_rreg(ahci, AHCI_CAP2), ==, ahci->cap2);
+
+ for (i = 0; i < 32; i++) {
+ g_assert_cmphex(ahci_px_rreg(ahci, i, AHCI_PX_FB), ==,
+ ahci->port[i].fb);
+ g_assert_cmphex(ahci_px_rreg(ahci, i, AHCI_PX_CLB), ==,
+ ahci->port[i].clb);
+ for (j = 0; j < 32; j++) {
+ ahci_get_command_header(ahci, i, j, &cmd);
+ g_assert_cmphex(cmd.prdtl, ==, ahci->port[i].prdtl[j]);
+ g_assert_cmphex(cmd.ctba, ==, ahci->port[i].ctba[j]);
+ }
+ }
+}
+
+static void ahci_migrate(AHCIQState *from, AHCIQState *to, const char *uri)
+{
+ QOSState *tmp = to->parent;
+ QPCIDevice *dev = to->dev;
+ if (uri == NULL) {
+ uri = "tcp:127.0.0.1:1234";
+ }
+
+ /* context will be 'to' after completion. */
+ migrate(from->parent, to->parent, uri);
+
+ /* We'd like for the AHCIState objects to still point
+ * to information specific to its specific parent
+ * instance, but otherwise just inherit the new data. */
+ memcpy(to, from, sizeof(AHCIQState));
+ to->parent = tmp;
+ to->dev = dev;
+
+ tmp = from->parent;
+ dev = from->dev;
+ memset(from, 0x00, sizeof(AHCIQState));
+ from->parent = tmp;
+ from->dev = dev;
+
+ verify_state(to);
+}
+
/*** Test Setup & Teardown ***/
/**
@@ -146,6 +212,8 @@ static AHCIQState *ahci_boot(const char *cli, ...)
static void ahci_shutdown(AHCIQState *ahci)
{
QOSState *qs = ahci->parent;
+
+ set_context(qs);
ahci_clean_mem(ahci);
free_ahci_device(ahci->dev);
g_free(ahci);
@@ -806,7 +874,7 @@ static void ahci_test_io_rw_simple(AHCIQState *ahci, unsigned bufsize,
/* Write some indicative pattern to our buffer. */
generate_pattern(tx, bufsize, AHCI_SECTOR_SIZE);
- memwrite(ptr, tx, bufsize);
+ bufwrite(ptr, tx, bufsize);
/* Write this buffer to disk, then read it back to the DMA buffer. */
ahci_guest_io(ahci, port, write_cmd, ptr, bufsize, sector);
@@ -814,7 +882,7 @@ static void ahci_test_io_rw_simple(AHCIQState *ahci, unsigned bufsize,
ahci_guest_io(ahci, port, read_cmd, ptr, bufsize, sector);
/*** Read back the Data ***/
- memread(ptr, rx, bufsize);
+ bufread(ptr, rx, bufsize);
g_assert_cmphex(memcmp(tx, rx, bufsize), ==, 0);
ahci_free(ahci, ptr);
@@ -950,7 +1018,7 @@ static void test_dma_fragmented(void)
/* Create a DMA buffer in guest memory, and write our pattern to it. */
ptr = guest_alloc(ahci->parent->alloc, bufsize);
g_assert(ptr);
- memwrite(ptr, tx, bufsize);
+ bufwrite(ptr, tx, bufsize);
cmd = ahci_command_create(CMD_WRITE_DMA);
ahci_command_adjust(cmd, 0, ptr, bufsize, 32);
@@ -967,7 +1035,7 @@ static void test_dma_fragmented(void)
g_free(cmd);
/* Read back the guest's receive buffer into local memory */
- memread(ptr, rx, bufsize);
+ bufread(ptr, rx, bufsize);
guest_free(ahci->parent->alloc, ptr);
g_assert_cmphex(memcmp(tx, rx, bufsize), ==, 0);
@@ -1003,7 +1071,7 @@ static void test_flush_retry(void)
debug_path,
tmp_path);
- /* Issue Flush Command */
+ /* Issue Flush Command and wait for error */
port = ahci_port_select(ahci);
ahci_port_clear(ahci, port);
cmd = ahci_command_create(CMD_FLUSH_CACHE);
@@ -1022,6 +1090,250 @@ static void test_flush_retry(void)
ahci_shutdown(ahci);
}
+/**
+ * Basic sanity test to boot a machine, find an AHCI device, and shutdown.
+ */
+static void test_migrate_sanity(void)
+{
+ AHCIQState *src, *dst;
+ const char *uri = "tcp:127.0.0.1:1234";
+
+ src = ahci_boot("-m 1024 -M q35 "
+ "-hda %s ", tmp_path);
+ dst = ahci_boot("-m 1024 -M q35 "
+ "-hda %s "
+ "-incoming %s", tmp_path, uri);
+
+ ahci_migrate(src, dst, uri);
+
+ ahci_shutdown(src);
+ ahci_shutdown(dst);
+}
+
+/**
+ * DMA Migration test: Write a pattern, migrate, then read.
+ */
+static void test_migrate_dma(void)
+{
+ AHCIQState *src, *dst;
+ uint8_t px;
+ size_t bufsize = 4096;
+ unsigned char *tx = g_malloc(bufsize);
+ unsigned char *rx = g_malloc0(bufsize);
+ unsigned i;
+ const char *uri = "tcp:127.0.0.1:1234";
+
+ src = ahci_boot_and_enable("-m 1024 -M q35 "
+ "-hda %s ", tmp_path);
+ dst = ahci_boot("-m 1024 -M q35 "
+ "-hda %s "
+ "-incoming %s", tmp_path, uri);
+
+ set_context(src->parent);
+
+ /* initialize */
+ px = ahci_port_select(src);
+ ahci_port_clear(src, px);
+
+ /* create pattern */
+ for (i = 0; i < bufsize; i++) {
+ tx[i] = (bufsize - i);
+ }
+
+ /* Write, migrate, then read. */
+ ahci_io(src, px, CMD_WRITE_DMA, tx, bufsize, 0);
+ ahci_migrate(src, dst, uri);
+ ahci_io(dst, px, CMD_READ_DMA, rx, bufsize, 0);
+
+ /* Verify pattern */
+ g_assert_cmphex(memcmp(tx, rx, bufsize), ==, 0);
+
+ ahci_shutdown(src);
+ ahci_shutdown(dst);
+ g_free(rx);
+ g_free(tx);
+}
+
+/**
+ * DMA Error Test
+ *
+ * Simulate an error on first write, Try to write a pattern,
+ * Confirm the VM has stopped, resume the VM, verify command
+ * has completed, then read back the data and verify.
+ */
+static void test_halted_dma(void)
+{
+ AHCIQState *ahci;
+ uint8_t port;
+ size_t bufsize = 4096;
+ unsigned char *tx = g_malloc(bufsize);
+ unsigned char *rx = g_malloc0(bufsize);
+ unsigned i;
+ uint64_t ptr;
+ AHCICommand *cmd;
+
+ prepare_blkdebug_script(debug_path, "write_aio");
+
+ ahci = ahci_boot_and_enable("-drive file=blkdebug:%s:%s,if=none,id=drive0,"
+ "format=qcow2,cache=writeback,"
+ "rerror=stop,werror=stop "
+ "-M q35 "
+ "-device ide-hd,drive=drive0 ",
+ debug_path,
+ tmp_path);
+
+ /* Initialize and prepare */
+ port = ahci_port_select(ahci);
+ ahci_port_clear(ahci, port);
+
+ for (i = 0; i < bufsize; i++) {
+ tx[i] = (bufsize - i);
+ }
+
+ /* create DMA source buffer and write pattern */
+ ptr = ahci_alloc(ahci, bufsize);
+ g_assert(ptr);
+ memwrite(ptr, tx, bufsize);
+
+ /* Attempt to write (and fail) */
+ cmd = ahci_guest_io_halt(ahci, port, CMD_WRITE_DMA,
+ ptr, bufsize, 0);
+
+ /* Attempt to resume the command */
+ ahci_guest_io_resume(ahci, cmd);
+ ahci_free(ahci, ptr);
+
+ /* Read back and verify */
+ ahci_io(ahci, port, CMD_READ_DMA, rx, bufsize, 0);
+ g_assert_cmphex(memcmp(tx, rx, bufsize), ==, 0);
+
+ /* Cleanup and go home */
+ ahci_shutdown(ahci);
+ g_free(rx);
+ g_free(tx);
+}
+
+/**
+ * DMA Error Migration Test
+ *
+ * Simulate an error on first write, Try to write a pattern,
+ * Confirm the VM has stopped, migrate, resume the VM,
+ * verify command has completed, then read back the data and verify.
+ */
+static void test_migrate_halted_dma(void)
+{
+ AHCIQState *src, *dst;
+ uint8_t port;
+ size_t bufsize = 4096;
+ unsigned char *tx = g_malloc(bufsize);
+ unsigned char *rx = g_malloc0(bufsize);
+ unsigned i;
+ uint64_t ptr;
+ AHCICommand *cmd;
+ const char *uri = "tcp:127.0.0.1:1234";
+
+ prepare_blkdebug_script(debug_path, "write_aio");
+
+ src = ahci_boot_and_enable("-drive file=blkdebug:%s:%s,if=none,id=drive0,"
+ "format=qcow2,cache=writeback,"
+ "rerror=stop,werror=stop "
+ "-M q35 "
+ "-device ide-hd,drive=drive0 ",
+ debug_path,
+ tmp_path);
+
+ dst = ahci_boot("-drive file=%s,if=none,id=drive0,"
+ "format=qcow2,cache=writeback,"
+ "rerror=stop,werror=stop "
+ "-M q35 "
+ "-device ide-hd,drive=drive0 "
+ "-incoming %s",
+ tmp_path, uri);
+
+ set_context(src->parent);
+
+ /* Initialize and prepare */
+ port = ahci_port_select(src);
+ ahci_port_clear(src, port);
+
+ for (i = 0; i < bufsize; i++) {
+ tx[i] = (bufsize - i);
+ }
+
+ /* create DMA source buffer and write pattern */
+ ptr = ahci_alloc(src, bufsize);
+ g_assert(ptr);
+ memwrite(ptr, tx, bufsize);
+
+ /* Write, trigger the VM to stop, migrate, then resume. */
+ cmd = ahci_guest_io_halt(src, port, CMD_WRITE_DMA,
+ ptr, bufsize, 0);
+ ahci_migrate(src, dst, uri);
+ ahci_guest_io_resume(dst, cmd);
+ ahci_free(dst, ptr);
+
+ /* Read back */
+ ahci_io(dst, port, CMD_READ_DMA, rx, bufsize, 0);
+
+ /* Verify TX and RX are identical */
+ g_assert_cmphex(memcmp(tx, rx, bufsize), ==, 0);
+
+ /* Cleanup and go home. */
+ ahci_shutdown(src);
+ ahci_shutdown(dst);
+ g_free(rx);
+ g_free(tx);
+}
+
+/**
+ * Migration test: Try to flush, migrate, then resume.
+ */
+static void test_flush_migrate(void)
+{
+ AHCIQState *src, *dst;
+ AHCICommand *cmd;
+ uint8_t px;
+ const char *s;
+ const char *uri = "tcp:127.0.0.1:1234";
+
+ prepare_blkdebug_script(debug_path, "flush_to_disk");
+
+ src = ahci_boot_and_enable("-drive file=blkdebug:%s:%s,if=none,id=drive0,"
+ "cache=writeback,rerror=stop,werror=stop "
+ "-M q35 "
+ "-device ide-hd,drive=drive0 ",
+ debug_path, tmp_path);
+ dst = ahci_boot("-drive file=%s,if=none,id=drive0,"
+ "cache=writeback,rerror=stop,werror=stop "
+ "-M q35 "
+ "-device ide-hd,drive=drive0 "
+ "-incoming %s", tmp_path, uri);
+
+ set_context(src->parent);
+
+ /* Issue Flush Command */
+ px = ahci_port_select(src);
+ ahci_port_clear(src, px);
+ cmd = ahci_command_create(CMD_FLUSH_CACHE);
+ ahci_command_commit(src, cmd, px);
+ ahci_command_issue_async(src, cmd);
+ qmp_eventwait("STOP");
+
+ /* Migrate over */
+ ahci_migrate(src, dst, uri);
+
+ /* Complete the command */
+ s = "{'execute':'cont' }";
+ qmp_async(s);
+ qmp_eventwait("RESUME");
+ ahci_command_wait(dst, cmd);
+ ahci_command_verify(dst, cmd);
+
+ ahci_command_free(cmd);
+ ahci_shutdown(src);
+ ahci_shutdown(dst);
+}
+
/******************************************************************************/
/* AHCI I/O Test Matrix Definitions */
@@ -1270,6 +1582,12 @@ int main(int argc, char **argv)
qtest_add_func("/ahci/flush/simple", test_flush);
qtest_add_func("/ahci/flush/retry", test_flush_retry);
+ qtest_add_func("/ahci/flush/migrate", test_flush_migrate);
+
+ qtest_add_func("/ahci/migrate/sanity", test_migrate_sanity);
+ qtest_add_func("/ahci/migrate/dma/simple", test_migrate_dma);
+ qtest_add_func("/ahci/io/dma/lba28/retry", test_halted_dma);
+ qtest_add_func("/ahci/migrate/dma/halted", test_migrate_halted_dma);
ret = g_test_run();
diff --git a/tests/libqos/ahci.c b/tests/libqos/ahci.c
index 843cf72980..7e17bb691e 100644
--- a/tests/libqos/ahci.c
+++ b/tests/libqos/ahci.c
@@ -566,6 +566,33 @@ inline unsigned size_to_prdtl(unsigned bytes, unsigned bytes_per_prd)
return (bytes + bytes_per_prd - 1) / bytes_per_prd;
}
+/* Issue a command, expecting it to fail and STOP the VM */
+AHCICommand *ahci_guest_io_halt(AHCIQState *ahci, uint8_t port,
+ uint8_t ide_cmd, uint64_t buffer,
+ size_t bufsize, uint64_t sector)
+{
+ AHCICommand *cmd;
+
+ cmd = ahci_command_create(ide_cmd);
+ ahci_command_adjust(cmd, sector, buffer, bufsize, 0);
+ ahci_command_commit(ahci, cmd, port);
+ ahci_command_issue_async(ahci, cmd);
+ qmp_eventwait("STOP");
+
+ return cmd;
+}
+
+/* Resume a previously failed command and verify/finalize */
+void ahci_guest_io_resume(AHCIQState *ahci, AHCICommand *cmd)
+{
+ /* Complete the command */
+ qmp_async("{'execute':'cont' }");
+ qmp_eventwait("RESUME");
+ ahci_command_wait(ahci, cmd);
+ ahci_command_verify(ahci, cmd);
+ ahci_command_free(cmd);
+}
+
/* Given a guest buffer address, perform an IO operation */
void ahci_guest_io(AHCIQState *ahci, uint8_t port, uint8_t ide_cmd,
uint64_t buffer, size_t bufsize, uint64_t sector)
@@ -623,15 +650,16 @@ void ahci_io(AHCIQState *ahci, uint8_t port, uint8_t ide_cmd,
g_assert(props);
ptr = ahci_alloc(ahci, bufsize);
g_assert(ptr);
+ qmemset(ptr, 0x00, bufsize);
if (props->write) {
- memwrite(ptr, buffer, bufsize);
+ bufwrite(ptr, buffer, bufsize);
}
ahci_guest_io(ahci, port, ide_cmd, ptr, bufsize, sector);
if (props->read) {
- memread(ptr, buffer, bufsize);
+ bufread(ptr, buffer, bufsize);
}
ahci_free(ahci, ptr);
@@ -742,7 +770,7 @@ void ahci_command_set_offset(AHCICommand *cmd, uint64_t lba_sect)
fis->lba_lo[1] = (lba_sect >> 8) & 0xFF;
fis->lba_lo[2] = (lba_sect >> 16) & 0xFF;
if (cmd->props->lba28) {
- fis->device = (fis->device & 0xF0) || (lba_sect >> 24) & 0x0F;
+ fis->device = (fis->device & 0xF0) | ((lba_sect >> 24) & 0x0F);
}
fis->lba_hi[0] = (lba_sect >> 24) & 0xFF;
fis->lba_hi[1] = (lba_sect >> 32) & 0xFF;
@@ -760,7 +788,9 @@ void ahci_command_set_sizes(AHCICommand *cmd, uint64_t xbytes,
/* Each PRD can describe up to 4MiB, and must not be odd. */
g_assert_cmphex(prd_size, <=, 4096 * 1024);
g_assert_cmphex(prd_size & 0x01, ==, 0x00);
- cmd->prd_size = prd_size;
+ if (prd_size) {
+ cmd->prd_size = prd_size;
+ }
cmd->xbytes = xbytes;
cmd->fis.count = (cmd->xbytes / AHCI_SECTOR_SIZE);
cmd->header.prdtl = size_to_prdtl(cmd->xbytes, cmd->prd_size);
diff --git a/tests/libqos/ahci.h b/tests/libqos/ahci.h
index 40e8ca48ba..779e812400 100644
--- a/tests/libqos/ahci.h
+++ b/tests/libqos/ahci.h
@@ -524,6 +524,9 @@ unsigned ahci_pick_cmd(AHCIQState *ahci, uint8_t port);
unsigned size_to_prdtl(unsigned bytes, unsigned bytes_per_prd);
void ahci_guest_io(AHCIQState *ahci, uint8_t port, uint8_t ide_cmd,
uint64_t gbuffer, size_t size, uint64_t sector);
+AHCICommand *ahci_guest_io_halt(AHCIQState *ahci, uint8_t port, uint8_t ide_cmd,
+ uint64_t gbuffer, size_t size, uint64_t sector);
+void ahci_guest_io_resume(AHCIQState *ahci, AHCICommand *cmd);
void ahci_io(AHCIQState *ahci, uint8_t port, uint8_t ide_cmd,
void *buffer, size_t bufsize, uint64_t sector);
diff --git a/tests/libqos/libqos.c b/tests/libqos/libqos.c
index 7e7207856e..fce625b18a 100644
--- a/tests/libqos/libqos.c
+++ b/tests/libqos/libqos.c
@@ -1,5 +1,6 @@
#include <stdio.h>
#include <stdlib.h>
+#include <string.h>
#include <glib.h>
#include <unistd.h>
#include <fcntl.h>
@@ -62,6 +63,90 @@ void qtest_shutdown(QOSState *qs)
g_free(qs);
}
+void set_context(QOSState *s)
+{
+ global_qtest = s->qts;
+}
+
+static QDict *qmp_execute(const char *command)
+{
+ char *fmt;
+ QDict *rsp;
+
+ fmt = g_strdup_printf("{ 'execute': '%s' }", command);
+ rsp = qmp(fmt);
+ g_free(fmt);
+
+ return rsp;
+}
+
+void migrate(QOSState *from, QOSState *to, const char *uri)
+{
+ const char *st;
+ char *s;
+ QDict *rsp, *sub;
+ bool running;
+
+ set_context(from);
+
+ /* Is the machine currently running? */
+ rsp = qmp_execute("query-status");
+ g_assert(qdict_haskey(rsp, "return"));
+ sub = qdict_get_qdict(rsp, "return");
+ g_assert(qdict_haskey(sub, "running"));
+ running = qdict_get_bool(sub, "running");
+ QDECREF(rsp);
+
+ /* Issue the migrate command. */
+ s = g_strdup_printf("{ 'execute': 'migrate',"
+ "'arguments': { 'uri': '%s' } }",
+ uri);
+ rsp = qmp(s);
+ g_free(s);
+ g_assert(qdict_haskey(rsp, "return"));
+ QDECREF(rsp);
+
+ /* Wait for STOP event, but only if we were running: */
+ if (running) {
+ qmp_eventwait("STOP");
+ }
+
+ /* If we were running, we can wait for an event. */
+ if (running) {
+ migrate_allocator(from->alloc, to->alloc);
+ set_context(to);
+ qmp_eventwait("RESUME");
+ return;
+ }
+
+ /* Otherwise, we need to wait: poll until migration is completed. */
+ while (1) {
+ rsp = qmp_execute("query-migrate");
+ g_assert(qdict_haskey(rsp, "return"));
+ sub = qdict_get_qdict(rsp, "return");
+ g_assert(qdict_haskey(sub, "status"));
+ st = qdict_get_str(sub, "status");
+
+ /* "setup", "active", "completed", "failed", "cancelled" */
+ if (strcmp(st, "completed") == 0) {
+ QDECREF(rsp);
+ break;
+ }
+
+ if ((strcmp(st, "setup") == 0) || (strcmp(st, "active") == 0)) {
+ QDECREF(rsp);
+ g_usleep(5000);
+ continue;
+ }
+
+ fprintf(stderr, "Migration did not complete, status: %s\n", st);
+ g_assert_not_reached();
+ }
+
+ migrate_allocator(from->alloc, to->alloc);
+ set_context(to);
+}
+
void mkimg(const char *file, const char *fmt, unsigned size_mb)
{
gchar *cli;
diff --git a/tests/libqos/libqos.h b/tests/libqos/libqos.h
index f57362b688..e1f14ea6fb 100644
--- a/tests/libqos/libqos.h
+++ b/tests/libqos/libqos.h
@@ -21,6 +21,8 @@ QOSState *qtest_boot(QOSOps *ops, const char *cmdline_fmt, ...);
void qtest_shutdown(QOSState *qs);
void mkimg(const char *file, const char *fmt, unsigned size_mb);
void mkqcow2(const char *file, unsigned size_mb);
+void set_context(QOSState *s);
+void migrate(QOSState *from, QOSState *to, const char *uri);
void prepare_blkdebug_script(const char *debug_fn, const char *event);
static inline uint64_t qmalloc(QOSState *q, size_t bytes)
diff --git a/tests/libqos/malloc.c b/tests/libqos/malloc.c
index 67f31902fd..827613005a 100644
--- a/tests/libqos/malloc.c
+++ b/tests/libqos/malloc.c
@@ -30,8 +30,8 @@ struct QGuestAllocator {
uint64_t end;
uint32_t page_size;
- MemList used;
- MemList free;
+ MemList *used;
+ MemList *free;
};
#define DEFAULT_PAGE_SIZE 4096
@@ -150,7 +150,7 @@ static uint64_t mlist_fulfill(QGuestAllocator *s, MemBlock *freenode,
addr = freenode->addr;
if (freenode->size == size) {
/* re-use this freenode as our used node */
- QTAILQ_REMOVE(&s->free, freenode, MLIST_ENTNAME);
+ QTAILQ_REMOVE(s->free, freenode, MLIST_ENTNAME);
usednode = freenode;
} else {
/* adjust the free node and create a new used node */
@@ -159,7 +159,7 @@ static uint64_t mlist_fulfill(QGuestAllocator *s, MemBlock *freenode,
usednode = mlist_new(addr, size);
}
- mlist_sort_insert(&s->used, usednode);
+ mlist_sort_insert(s->used, usednode);
return addr;
}
@@ -171,7 +171,7 @@ static void mlist_check(QGuestAllocator *s)
uint64_t addr = s->start > 0 ? s->start - 1 : 0;
uint64_t next = s->start;
- QTAILQ_FOREACH(node, &s->free, MLIST_ENTNAME) {
+ QTAILQ_FOREACH(node, s->free, MLIST_ENTNAME) {
g_assert_cmpint(node->addr, >, addr);
g_assert_cmpint(node->addr, >=, next);
addr = node->addr;
@@ -180,7 +180,7 @@ static void mlist_check(QGuestAllocator *s)
addr = s->start > 0 ? s->start - 1 : 0;
next = s->start;
- QTAILQ_FOREACH(node, &s->used, MLIST_ENTNAME) {
+ QTAILQ_FOREACH(node, s->used, MLIST_ENTNAME) {
g_assert_cmpint(node->addr, >, addr);
g_assert_cmpint(node->addr, >=, next);
addr = node->addr;
@@ -192,7 +192,7 @@ static uint64_t mlist_alloc(QGuestAllocator *s, uint64_t size)
{
MemBlock *node;
- node = mlist_find_space(&s->free, size);
+ node = mlist_find_space(s->free, size);
if (!node) {
fprintf(stderr, "Out of guest memory.\n");
g_assert_not_reached();
@@ -208,7 +208,7 @@ static void mlist_free(QGuestAllocator *s, uint64_t addr)
return;
}
- node = mlist_find_key(&s->used, addr);
+ node = mlist_find_key(s->used, addr);
if (!node) {
fprintf(stderr, "Error: no record found for an allocation at "
"0x%016" PRIx64 ".\n",
@@ -217,9 +217,9 @@ static void mlist_free(QGuestAllocator *s, uint64_t addr)
}
/* Rip it out of the used list and re-insert back into the free list. */
- QTAILQ_REMOVE(&s->used, node, MLIST_ENTNAME);
- mlist_sort_insert(&s->free, node);
- mlist_coalesce(&s->free, node);
+ QTAILQ_REMOVE(s->used, node, MLIST_ENTNAME);
+ mlist_sort_insert(s->free, node);
+ mlist_coalesce(s->free, node);
}
/*
@@ -233,7 +233,7 @@ void alloc_uninit(QGuestAllocator *allocator)
QAllocOpts mask;
/* Check for guest leaks, and destroy the list. */
- QTAILQ_FOREACH_SAFE(node, &allocator->used, MLIST_ENTNAME, tmp) {
+ QTAILQ_FOREACH_SAFE(node, allocator->used, MLIST_ENTNAME, tmp) {
if (allocator->opts & (ALLOC_LEAK_WARN | ALLOC_LEAK_ASSERT)) {
fprintf(stderr, "guest malloc leak @ 0x%016" PRIx64 "; "
"size 0x%016" PRIx64 ".\n",
@@ -248,7 +248,7 @@ void alloc_uninit(QGuestAllocator *allocator)
/* If we have previously asserted that there are no leaks, then there
* should be only one node here with a specific address and size. */
mask = ALLOC_LEAK_ASSERT | ALLOC_PARANOID;
- QTAILQ_FOREACH_SAFE(node, &allocator->free, MLIST_ENTNAME, tmp) {
+ QTAILQ_FOREACH_SAFE(node, allocator->free, MLIST_ENTNAME, tmp) {
if ((allocator->opts & mask) == mask) {
if ((node->addr != allocator->start) ||
(node->size != allocator->end - allocator->start)) {
@@ -260,6 +260,8 @@ void alloc_uninit(QGuestAllocator *allocator)
g_free(node);
}
+ g_free(allocator->used);
+ g_free(allocator->free);
g_free(allocator);
}
@@ -297,11 +299,13 @@ QGuestAllocator *alloc_init(uint64_t start, uint64_t end)
s->start = start;
s->end = end;
- QTAILQ_INIT(&s->used);
- QTAILQ_INIT(&s->free);
+ s->used = g_malloc(sizeof(MemList));
+ s->free = g_malloc(sizeof(MemList));
+ QTAILQ_INIT(s->used);
+ QTAILQ_INIT(s->free);
node = mlist_new(s->start, s->end - s->start);
- QTAILQ_INSERT_HEAD(&s->free, node, MLIST_ENTNAME);
+ QTAILQ_INSERT_HEAD(s->free, node, MLIST_ENTNAME);
s->page_size = DEFAULT_PAGE_SIZE;
@@ -319,7 +323,7 @@ QGuestAllocator *alloc_init_flags(QAllocOpts opts,
void alloc_set_page_size(QGuestAllocator *allocator, size_t page_size)
{
/* Can't alter the page_size for an allocator in-use */
- g_assert(QTAILQ_EMPTY(&allocator->used));
+ g_assert(QTAILQ_EMPTY(allocator->used));
g_assert(is_power_of_2(page_size));
allocator->page_size = page_size;
@@ -329,3 +333,39 @@ void alloc_set_flags(QGuestAllocator *allocator, QAllocOpts opts)
{
allocator->opts |= opts;
}
+
+void migrate_allocator(QGuestAllocator *src,
+ QGuestAllocator *dst)
+{
+ MemBlock *node, *tmp;
+ MemList *tmpused, *tmpfree;
+
+ /* The general memory layout should be equivalent,
+ * though opts can differ. */
+ g_assert_cmphex(src->start, ==, dst->start);
+ g_assert_cmphex(src->end, ==, dst->end);
+
+ /* Destroy (silently, regardless of options) the dest-list: */
+ QTAILQ_FOREACH_SAFE(node, dst->used, MLIST_ENTNAME, tmp) {
+ g_free(node);
+ }
+ QTAILQ_FOREACH_SAFE(node, dst->free, MLIST_ENTNAME, tmp) {
+ g_free(node);
+ }
+
+ tmpused = dst->used;
+ tmpfree = dst->free;
+
+ /* Inherit the lists of the source allocator: */
+ dst->used = src->used;
+ dst->free = src->free;
+
+ /* Source is now re-initialized, the source memory is 'invalid' now: */
+ src->used = tmpused;
+ src->free = tmpfree;
+ QTAILQ_INIT(src->used);
+ QTAILQ_INIT(src->free);
+ node = mlist_new(src->start, src->end - src->start);
+ QTAILQ_INSERT_HEAD(src->free, node, MLIST_ENTNAME);
+ return;
+}
diff --git a/tests/libqos/malloc.h b/tests/libqos/malloc.h
index 71ac407dcd..0c6c9b7f30 100644
--- a/tests/libqos/malloc.h
+++ b/tests/libqos/malloc.h
@@ -31,6 +31,7 @@ void alloc_uninit(QGuestAllocator *allocator);
/* Always returns page aligned values */
uint64_t guest_alloc(QGuestAllocator *allocator, size_t size);
void guest_free(QGuestAllocator *allocator, uint64_t addr);
+void migrate_allocator(QGuestAllocator *src, QGuestAllocator *dst);
QGuestAllocator *alloc_init(uint64_t start, uint64_t end);
QGuestAllocator *alloc_init_flags(QAllocOpts flags,
diff --git a/tests/libqtest.c b/tests/libqtest.c
index a525dc532c..e5188e0327 100644
--- a/tests/libqtest.c
+++ b/tests/libqtest.c
@@ -695,28 +695,55 @@ void qtest_add_data_func(const char *str, const void *data, void (*fn))
g_free(path);
}
+void qtest_bufwrite(QTestState *s, uint64_t addr, const void *data, size_t size)
+{
+ gchar *bdata;
+
+ bdata = g_base64_encode(data, size);
+ qtest_sendf(s, "b64write 0x%" PRIx64 " 0x%zx ", addr, size);
+ socket_send(s->fd, bdata, strlen(bdata));
+ socket_send(s->fd, "\n", 1);
+ qtest_rsp(s, 0);
+ g_free(bdata);
+}
+
+void qtest_bufread(QTestState *s, uint64_t addr, void *data, size_t size)
+{
+ gchar **args;
+ size_t len;
+
+ qtest_sendf(s, "b64read 0x%" PRIx64 " 0x%zx\n", addr, size);
+ args = qtest_rsp(s, 2);
+
+ g_base64_decode_inplace(args[1], &len);
+ if (size != len) {
+ fprintf(stderr, "bufread: asked for %zu bytes but decoded %zu\n",
+ size, len);
+ len = MIN(len, size);
+ }
+
+ memcpy(data, args[1], len);
+ g_strfreev(args);
+}
+
void qtest_memwrite(QTestState *s, uint64_t addr, const void *data, size_t size)
{
const uint8_t *ptr = data;
size_t i;
+ char *enc = g_malloc(2 * size + 1);
- qtest_sendf(s, "write 0x%" PRIx64 " 0x%zx 0x", addr, size);
for (i = 0; i < size; i++) {
- qtest_sendf(s, "%02x", ptr[i]);
+ sprintf(&enc[i * 2], "%02x", ptr[i]);
}
- qtest_sendf(s, "\n");
+
+ qtest_sendf(s, "write 0x%" PRIx64 " 0x%zx 0x%s\n", addr, size, enc);
qtest_rsp(s, 0);
+ g_free(enc);
}
void qtest_memset(QTestState *s, uint64_t addr, uint8_t pattern, size_t size)
{
- size_t i;
-
- qtest_sendf(s, "write 0x%" PRIx64 " 0x%zx 0x", addr, size);
- for (i = 0; i < size; i++) {
- qtest_sendf(s, "%02x", pattern);
- }
- qtest_sendf(s, "\n");
+ qtest_sendf(s, "memset 0x%" PRIx64 " 0x%zx 0x%02x\n", addr, size, pattern);
qtest_rsp(s, 0);
}
diff --git a/tests/libqtest.h b/tests/libqtest.h
index 4b54b5da9e..ec42031523 100644
--- a/tests/libqtest.h
+++ b/tests/libqtest.h
@@ -301,6 +301,17 @@ uint64_t qtest_readq(QTestState *s, uint64_t addr);
void qtest_memread(QTestState *s, uint64_t addr, void *data, size_t size);
/**
+ * qtest_bufread:
+ * @s: #QTestState instance to operate on.
+ * @addr: Guest address to read from.
+ * @data: Pointer to where memory contents will be stored.
+ * @size: Number of bytes to read.
+ *
+ * Read guest memory into a buffer and receive using a base64 encoding.
+ */
+void qtest_bufread(QTestState *s, uint64_t addr, void *data, size_t size);
+
+/**
* qtest_memwrite:
* @s: #QTestState instance to operate on.
* @addr: Guest address to write to.
@@ -312,6 +323,18 @@ void qtest_memread(QTestState *s, uint64_t addr, void *data, size_t size);
void qtest_memwrite(QTestState *s, uint64_t addr, const void *data, size_t size);
/**
+ * qtest_bufwrite:
+ * @s: #QTestState instance to operate on.
+ * @addr: Guest address to write to.
+ * @data: Pointer to the bytes that will be written to guest memory.
+ * @size: Number of bytes to write.
+ *
+ * Write a buffer to guest memory and transmit using a base64 encoding.
+ */
+void qtest_bufwrite(QTestState *s, uint64_t addr,
+ const void *data, size_t size);
+
+/**
* qtest_memset:
* @s: #QTestState instance to operate on.
* @addr: Guest address to write to.
@@ -699,6 +722,19 @@ static inline void memread(uint64_t addr, void *data, size_t size)
}
/**
+ * bufread:
+ * @addr: Guest address to read from.
+ * @data: Pointer to where memory contents will be stored.
+ * @size: Number of bytes to read.
+ *
+ * Read guest memory into a buffer, receive using a base64 encoding.
+ */
+static inline void bufread(uint64_t addr, void *data, size_t size)
+{
+ qtest_bufread(global_qtest, addr, data, size);
+}
+
+/**
* memwrite:
* @addr: Guest address to write to.
* @data: Pointer to the bytes that will be written to guest memory.
@@ -712,6 +748,19 @@ static inline void memwrite(uint64_t addr, const void *data, size_t size)
}
/**
+ * bufwrite:
+ * @addr: Guest address to write to.
+ * @data: Pointer to the bytes that will be written to guest memory.
+ * @size: Number of bytes to write.
+ *
+ * Write a buffer to guest memory, transmit using a base64 encoding.
+ */
+static inline void bufwrite(uint64_t addr, const void *data, size_t size)
+{
+ qtest_bufwrite(global_qtest, addr, data, size);
+}
+
+/**
* qmemset:
* @addr: Guest address to write to.
* @patt: Byte pattern to fill the guest memory region with.
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 16:57:11 +0000