diff options
-rw-r--r-- | qemu-options.hx | 4 | ||||
-rwxr-xr-x | tests/multiboot/run_test.sh | 10 | ||||
-rwxr-xr-x | tests/qemu-iotests/051 | 7 | ||||
-rwxr-xr-x | tests/qemu-iotests/068 | 2 | ||||
-rwxr-xr-x | tests/qemu-iotests/142 | 48 | ||||
-rwxr-xr-x | tests/qemu-iotests/171 | 14 | ||||
-rwxr-xr-x | tests/qemu-iotests/check | 18 | ||||
-rwxr-xr-x | tests/rocker/all | 10 | ||||
-rw-r--r-- | tests/tcg/cris/Makefile | 8 |
9 files changed, 61 insertions, 60 deletions
diff --git a/qemu-options.hx b/qemu-options.hx index 76b1c67737..2cc70b9cfc 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -4374,7 +4374,7 @@ The simplest (insecure) usage is to provide the secret inline The simplest secure usage is to provide the secret via a file - # echo -n "letmein" > mypasswd.txt + # printf "letmein" > mypasswd.txt # $QEMU -object secret,id=sec0,file=mypasswd.txt,format=raw For greater security, AES-256-CBC should be used. To illustrate usage, @@ -4402,7 +4402,7 @@ telling openssl to base64 encode the result, but it could be left as raw bytes if desired. @example - # SECRET=$(echo -n "letmein" | + # SECRET=$(printf "letmein" | openssl enc -aes-256-cbc -a -K $KEY -iv $IV) @end example diff --git a/tests/multiboot/run_test.sh b/tests/multiboot/run_test.sh index 78d7edfc3b..c8f3da8f37 100755 --- a/tests/multiboot/run_test.sh +++ b/tests/multiboot/run_test.sh @@ -26,7 +26,7 @@ run_qemu() { local kernel=$1 shift - echo -e "\n\n=== Running test case: $kernel $@ ===\n" >> test.log + printf %b "\n\n=== Running test case: $kernel $@ ===\n\n" >> test.log $QEMU \ -kernel $kernel \ @@ -68,21 +68,21 @@ for t in mmap modules; do pass=1 if [ $debugexit != 1 ]; then - echo -e "\e[31m ?? \e[0m $t (no debugexit used, exit code $ret)" + printf %b "\e[31m ?? \e[0m $t (no debugexit used, exit code $ret)\n" pass=0 elif [ $ret != 0 ]; then - echo -e "\e[31mFAIL\e[0m $t (exit code $ret)" + printf %b "\e[31mFAIL\e[0m $t (exit code $ret)\n" pass=0 fi if ! diff $t.out test.log > /dev/null 2>&1; then - echo -e "\e[31mFAIL\e[0m $t (output difference)" + printf %b "\e[31mFAIL\e[0m $t (output difference)\n" diff -u $t.out test.log pass=0 fi if [ $pass == 1 ]; then - echo -e "\e[32mPASS\e[0m $t" + printf %b "\e[32mPASS\e[0m $t\n" fi done diff --git a/tests/qemu-iotests/051 b/tests/qemu-iotests/051 index 26c29deb51..c8cfc764bc 100755 --- a/tests/qemu-iotests/051 +++ b/tests/qemu-iotests/051 @@ -217,7 +217,7 @@ run_qemu -drive driver=null-co,cache=invalid_value # Test 142 checks the direct=on cases for cache in writeback writethrough unsafe invalid_value; do - echo -e "info block\ninfo block file\ninfo block backing\ninfo block backing-file" | \ + printf "info block %s\n" '' file backing backing-file | \ run_qemu -drive file="$TEST_IMG",cache=$cache,backing.file.filename="$TEST_IMG.base",backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=$device_id -nodefaults done @@ -325,8 +325,9 @@ echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_I $QEMU_IO -c "read -P 0x22 0 4k" "$TEST_IMG" | _filter_qemu_io -echo -e "qemu-io $device_id \"write -P 0x33 0 4k\"\ncommit $device_id" | run_qemu -drive file="$TEST_IMG",snapshot=on,if=none,id=$device_id\ - | _filter_qemu_io +printf %b "qemu-io $device_id \"write -P 0x33 0 4k\"\ncommit $device_id\n" | + run_qemu -drive file="$TEST_IMG",snapshot=on,if=none,id=$device_id | + _filter_qemu_io $QEMU_IO -c "read -P 0x33 0 4k" "$TEST_IMG" | _filter_qemu_io diff --git a/tests/qemu-iotests/068 b/tests/qemu-iotests/068 index 3801b65b9d..cfa0f2aed5 100755 --- a/tests/qemu-iotests/068 +++ b/tests/qemu-iotests/068 @@ -76,7 +76,7 @@ for extra_args in \ _make_test_img $IMG_SIZE # Give qemu some time to boot before saving the VM state - bash -c 'sleep 1; echo -e "savevm 0\nquit"' | _qemu $extra_args + { sleep 1; printf "savevm 0\nquit\n"; } | _qemu $extra_args # Now try to continue from that VM state (this should just work) echo quit | _qemu $extra_args -loadvm 0 done diff --git a/tests/qemu-iotests/142 b/tests/qemu-iotests/142 index 9a5b713256..1639c83985 100755 --- a/tests/qemu-iotests/142 +++ b/tests/qemu-iotests/142 @@ -94,36 +94,36 @@ function check_cache_all() # cache.direct is supposed to be inherited by both bs->file and # bs->backing - echo -e "cache.direct=on on none0" + printf "cache.direct=on on none0\n" echo "$hmp_cmds" | run_qemu -drive "$files","$ids",cache.direct=on | grep -e "Cache" -e "[Cc]annot|[Cc]ould not|[Cc]an't" - echo -e "\ncache.direct=on on file" + printf "\ncache.direct=on on file\n" echo "$hmp_cmds" | run_qemu -drive "$files","$ids",file.cache.direct=on | grep -e "Cache" -e "[Cc]annot|[Cc]ould not|[Cc]an't" - echo -e "\ncache.direct=on on backing" + printf "\ncache.direct=on on backing\n" echo "$hmp_cmds" | run_qemu -drive "$files","$ids",backing.cache.direct=on | grep -e "Cache" -e "[Cc]annot|[Cc]ould not|[Cc]an't" - echo -e "\ncache.direct=on on backing-file" + printf "\ncache.direct=on on backing-file\n" echo "$hmp_cmds" | run_qemu -drive "$files","$ids",backing.file.cache.direct=on | grep -e "Cache" -e "[Cc]annot|[Cc]ould not|[Cc]an't" # cache.writeback is supposed to be inherited by bs->backing; bs->file # always gets cache.writeback=on - echo -e "\n\ncache.writeback=off on none0" + printf "\n\ncache.writeback=off on none0\n" echo "$hmp_cmds" | run_qemu -drive "$files","$ids",cache.writeback=off | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" - echo -e "\ncache.writeback=off on file" + printf "\ncache.writeback=off on file\n" echo "$hmp_cmds" | run_qemu -drive "$files","$ids",file.cache.writeback=off | grep -e "doesn't" -e "does not" - echo -e "\ncache.writeback=off on backing" + printf "\ncache.writeback=off on backing\n" echo "$hmp_cmds" | run_qemu -drive "$files","$ids",backing.cache.writeback=off | grep -e "doesn't" -e "does not" - echo -e "\ncache.writeback=off on backing-file" + printf "\ncache.writeback=off on backing-file\n" echo "$hmp_cmds" | run_qemu -drive "$files","$ids",backing.file.cache.writeback=off | grep -e "doesn't" -e "does not" # cache.no-flush is supposed to be inherited by both bs->file and bs->backing - echo -e "\n\ncache.no-flush=on on none0" + printf "\n\ncache.no-flush=on on none0\n" echo "$hmp_cmds" | run_qemu -drive "$files","$ids",cache.no-flush=on | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" - echo -e "\ncache.no-flush=on on file" + printf "\ncache.no-flush=on on file\n" echo "$hmp_cmds" | run_qemu -drive "$files","$ids",file.cache.no-flush=on | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" - echo -e "\ncache.no-flush=on on backing" + printf "\ncache.no-flush=on on backing\n" echo "$hmp_cmds" | run_qemu -drive "$files","$ids",backing.cache.no-flush=on | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" - echo -e "\ncache.no-flush=on on backing-file" + printf "\ncache.no-flush=on on backing-file\n" echo "$hmp_cmds" | run_qemu -drive "$files","$ids",backing.file.cache.no-flush=on | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" } @@ -236,35 +236,35 @@ function check_cache_all_separate() { # Check cache.direct - echo -e "cache.direct=on on blk" + printf "cache.direct=on on blk\n" echo "$hmp_cmds" | run_qemu -drive "$drv_bkfile" -drive "$drv_bk" -drive "$drv_file" -drive "$drv_img",cache.direct=on | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" - echo -e "\ncache.direct=on on file" + printf "\ncache.direct=on on file\n" echo "$hmp_cmds" | run_qemu -drive "$drv_bkfile" -drive "$drv_bk" -drive "$drv_file",cache.direct=on -drive "$drv_img" | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" - echo -e "\ncache.direct=on on backing" + printf "\ncache.direct=on on backing\n" echo "$hmp_cmds" | run_qemu -drive "$drv_bkfile" -drive "$drv_bk",cache.direct=on -drive "$drv_file" -drive "$drv_img" | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" - echo -e "\ncache.direct=on on backing-file" + printf "\ncache.direct=on on backing-file\n" echo "$hmp_cmds" | run_qemu -drive "$drv_bkfile",cache.direct=on -drive "$drv_bk" -drive "$drv_file" -drive "$drv_img" | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" # Check cache.writeback - echo -e "\n\ncache.writeback=off on blk" + printf "\n\ncache.writeback=off on blk\n" echo "$hmp_cmds" | run_qemu -drive "$drv_bkfile" -drive "$drv_bk" -drive "$drv_file" -drive "$drv_img",cache.writeback=off | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" - echo -e "\ncache.writeback=off on file" + printf "\ncache.writeback=off on file\n" echo "$hmp_cmds" | run_qemu -drive "$drv_bkfile" -drive "$drv_bk" -drive "$drv_file",cache.writeback=off -drive "$drv_img" | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" - echo -e "\ncache.writeback=off on backing" + printf "\ncache.writeback=off on backing\n" echo "$hmp_cmds" | run_qemu -drive "$drv_bkfile" -drive "$drv_bk",cache.writeback=off -drive "$drv_file" -drive "$drv_img" | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" - echo -e "\ncache.writeback=off on backing-file" + printf "\ncache.writeback=off on backing-file\n" echo "$hmp_cmds" | run_qemu -drive "$drv_bkfile",cache.writeback=off -drive "$drv_bk" -drive "$drv_file" -drive "$drv_img" | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" # Check cache.no-flush - echo -e "\n\ncache.no-flush=on on blk" + printf "\n\ncache.no-flush=on on blk\n" echo "$hmp_cmds" | run_qemu -drive "$drv_bkfile" -drive "$drv_bk" -drive "$drv_file" -drive "$drv_img",cache.no-flush=on | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" - echo -e "\ncache.no-flush=on on file" + printf "\ncache.no-flush=on on file\n" echo "$hmp_cmds" | run_qemu -drive "$drv_bkfile" -drive "$drv_bk" -drive "$drv_file",cache.no-flush=on -drive "$drv_img" | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" - echo -e "\ncache.no-flush=on on backing" + printf "\ncache.no-flush=on on backing\n" echo "$hmp_cmds" | run_qemu -drive "$drv_bkfile" -drive "$drv_bk",cache.no-flush=on -drive "$drv_file" -drive "$drv_img" | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" - echo -e "\ncache.no-flush=on on backing-file" + printf "\ncache.no-flush=on on backing-file\n" echo "$hmp_cmds" | run_qemu -drive "$drv_bkfile",cache.no-flush=on -drive "$drv_bk" -drive "$drv_file" -drive "$drv_img" | grep -e "Cache" -e "[Cc]annot\|[Cc]ould not\|[Cc]an't" } diff --git a/tests/qemu-iotests/171 b/tests/qemu-iotests/171 index 257be10a0e..bcfaaf1be2 100755 --- a/tests/qemu-iotests/171 +++ b/tests/qemu-iotests/171 @@ -45,15 +45,15 @@ _supported_os Linux # Create JSON with options img_json() { - echo -n 'json:{"driver":"raw", ' - echo -n "\"offset\":\"$img_offset\", " + printf %s 'json:{"driver":"raw", ' + printf %s "\"offset\":\"$img_offset\", " if [ "$img_size" -ne -1 ] ; then - echo -n "\"size\":\"$img_size\", " + printf %s "\"size\":\"$img_size\", " fi - echo -n '"file": {' - echo -n '"driver":"file", ' - echo -n "\"filename\":\"$TEST_IMG\" " - echo -n "} }" + printf %s '"file": {' + printf %s '"driver":"file", ' + printf %s "\"filename\":\"$TEST_IMG\" " + printf %s "} }" } do_general_test() { diff --git a/tests/qemu-iotests/check b/tests/qemu-iotests/check index 4b1c6749b7..9ded37c128 100755 --- a/tests/qemu-iotests/check +++ b/tests/qemu-iotests/check @@ -141,7 +141,7 @@ _wallclock() _timestamp() { now=`date "+%T"` - echo -n " [$now]" + printf %s " [$now]" } _wrapup() @@ -255,7 +255,7 @@ seq="check" for seq in $list do err=false - echo -n "$seq" + printf %s "$seq" if [ -n "$TESTS_REMAINING_LOG" ] ; then sed -e "s/$seq//" -e 's/ / /' -e 's/^ *//' $TESTS_REMAINING_LOG > $TESTS_REMAINING_LOG.tmp mv $TESTS_REMAINING_LOG.tmp $TESTS_REMAINING_LOG @@ -281,9 +281,9 @@ do rm -f $seq.out.bad lasttime=`sed -n -e "/^$seq /s/.* //p" <$TIMESTAMP_FILE` if [ "X$lasttime" != X ]; then - echo -n " ${lasttime}s ..." + printf %s " ${lasttime}s ..." else - echo -n " " # prettier output with timestamps. + printf " " # prettier output with timestamps. fi rm -f core $seq.notrun @@ -291,7 +291,7 @@ do echo "$seq" > "${TEST_DIR}"/check.sts start=`_wallclock` - $timestamp && echo -n " ["`date "+%T"`"]" + $timestamp && printf %s " [$(date "+%T")]" if [ "$(head -n 1 "$source_iotests/$seq")" == "#!/usr/bin/env python" ]; then run_command="$PYTHON $seq" @@ -314,21 +314,21 @@ do if [ -f core ] then - echo -n " [dumped core]" + printf " [dumped core]" mv core $seq.core err=true fi if [ -f $seq.notrun ] then - $timestamp || echo -n " [not run] " - $timestamp && echo " [not run]" && echo -n " $seq -- " + $timestamp || printf " [not run] " + $timestamp && echo " [not run]" && printf %s " $seq -- " cat $seq.notrun notrun="$notrun $seq" else if [ $sts -ne 0 ] then - echo -n " [failed, exit status $sts]" + printf %s " [failed, exit status $sts]" err=true fi diff --git a/tests/rocker/all b/tests/rocker/all index d5ae9632a2..3f9b786daf 100755 --- a/tests/rocker/all +++ b/tests/rocker/all @@ -1,19 +1,19 @@ -echo -n "Running port test... " +printf "Running port test... " ./port if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi -echo -n "Running bridge test... " +printf "Running bridge test... " ./bridge if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi -echo -n "Running bridge STP test... " +printf "Running bridge STP test... " ./bridge-stp if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi -echo -n "Running bridge VLAN test... " +printf "Running bridge VLAN test... " ./bridge-vlan if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi -echo -n "Running bridge VLAN STP test... " +printf "Running bridge VLAN STP test... " ./bridge-vlan-stp if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi diff --git a/tests/tcg/cris/Makefile b/tests/tcg/cris/Makefile index 6b3dba446c..664b30ce81 100644 --- a/tests/tcg/cris/Makefile +++ b/tests/tcg/cris/Makefile @@ -150,17 +150,17 @@ check_addcv17.tst: crtv10.o sysv10.o build: $(CRT) $(SYS) $(TESTCASES) check: $(CRT) $(SYS) $(TESTCASES) - @echo -e "\nQEMU simulator." + @printf "\nQEMU simulator.\n" for case in $(TESTCASES); do \ - echo -n "$$case "; \ + printf %s "$$case "; \ SIMARGS=; \ case $$case in *v17*) SIMARGS="-cpu crisv17";; esac; \ $(SIM) $$SIMARGS ./$$case; \ done check-g: $(CRT) $(SYS) $(TESTCASES) - @echo -e "\nGDB simulator." + @printf "\nGDB simulator.\n" @for case in $(TESTCASES); do \ - echo -n "$$case "; \ + printf %s "$$case "; \ $(SIMG) $$case; \ done |