diff options
-rw-r--r-- | default-configs/arm-softmmu.mak | 1 | ||||
-rw-r--r-- | hw/arm/Makefile.objs | 1 | ||||
-rw-r--r-- | hw/arm/mps2.c | 270 |
3 files changed, 272 insertions, 0 deletions
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index 93e995d318..bfd2a88d00 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -83,6 +83,7 @@ CONFIG_ONENAND=y CONFIG_TUSB6010=y CONFIG_IMX=y CONFIG_MAINSTONE=y +CONFIG_MPS2=y CONFIG_NSERIES=y CONFIG_RASPI=y CONFIG_REALVIEW=y diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index 4c5c4ee76c..a2e56ecaae 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -18,3 +18,4 @@ obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o +obj-$(CONFIG_MPS2) += mps2.o diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c new file mode 100644 index 0000000000..22b33ffc7b --- /dev/null +++ b/hw/arm/mps2.c @@ -0,0 +1,270 @@ +/* + * ARM V2M MPS2 board emulation. + * + * Copyright (c) 2017 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* The MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger + * FPGA but is otherwise the same as the 2). Since the CPU itself + * and most of the devices are in the FPGA, the details of the board + * as seen by the guest depend significantly on the FPGA image. + * We model the following FPGA images: + * "mps2-an385" -- Cortex-M3 as documented in ARM Application Note AN385 + * "mps2-an511" -- Cortex-M3 'DesignStart' as documented in AN511 + * + * Links to the TRM for the board itself and to the various Application + * Notes which document the FPGA images can be found here: + * https://developer.arm.com/products/system-design/development-boards/cortex-m-prototyping-system + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "hw/arm/arm.h" +#include "hw/arm/armv7m.h" +#include "hw/boards.h" +#include "exec/address-spaces.h" +#include "hw/misc/unimp.h" + +typedef enum MPS2FPGAType { + FPGA_AN385, + FPGA_AN511, +} MPS2FPGAType; + +typedef struct { + MachineClass parent; + MPS2FPGAType fpga_type; + const char *cpu_model; +} MPS2MachineClass; + +typedef struct { + MachineState parent; + + ARMv7MState armv7m; + MemoryRegion psram; + MemoryRegion ssram1; + MemoryRegion ssram1_m; + MemoryRegion ssram23; + MemoryRegion ssram23_m; + MemoryRegion blockram; + MemoryRegion blockram_m1; + MemoryRegion blockram_m2; + MemoryRegion blockram_m3; + MemoryRegion sram; +} MPS2MachineState; + +#define TYPE_MPS2_MACHINE "mps2" +#define TYPE_MPS2_AN385_MACHINE MACHINE_TYPE_NAME("mps2-an385") +#define TYPE_MPS2_AN511_MACHINE MACHINE_TYPE_NAME("mps2-an511") + +#define MPS2_MACHINE(obj) \ + OBJECT_CHECK(MPS2MachineState, obj, TYPE_MPS2_MACHINE) +#define MPS2_MACHINE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(MPS2MachineClass, obj, TYPE_MPS2_MACHINE) +#define MPS2_MACHINE_CLASS(klass) \ + OBJECT_CLASS_CHECK(MPS2MachineClass, klass, TYPE_MPS2_MACHINE) + +/* Main SYSCLK frequency in Hz */ +#define SYSCLK_FRQ 25000000 + +/* Initialize the auxiliary RAM region @mr and map it into + * the memory map at @base. + */ +static void make_ram(MemoryRegion *mr, const char *name, + hwaddr base, hwaddr size) +{ + memory_region_init_ram(mr, NULL, name, size, &error_fatal); + memory_region_add_subregion(get_system_memory(), base, mr); +} + +/* Create an alias of an entire original MemoryRegion @orig + * located at @base in the memory map. + */ +static void make_ram_alias(MemoryRegion *mr, const char *name, + MemoryRegion *orig, hwaddr base) +{ + memory_region_init_alias(mr, NULL, name, orig, 0, + memory_region_size(orig)); + memory_region_add_subregion(get_system_memory(), base, mr); +} + +static void mps2_common_init(MachineState *machine) +{ + MPS2MachineState *mms = MPS2_MACHINE(machine); + MPS2MachineClass *mmc = MPS2_MACHINE_GET_CLASS(machine); + MemoryRegion *system_memory = get_system_memory(); + DeviceState *armv7m; + + if (!machine->cpu_model) { + machine->cpu_model = mmc->cpu_model; + } + + if (strcmp(machine->cpu_model, mmc->cpu_model) != 0) { + error_report("This board can only be used with CPU %s", mmc->cpu_model); + exit(1); + } + + /* The FPGA images have an odd combination of different RAMs, + * because in hardware they are different implementations and + * connected to different buses, giving varying performance/size + * tradeoffs. For QEMU they're all just RAM, though. We arbitrarily + * call the 16MB our "system memory", as it's the largest lump. + * + * Common to both boards: + * 0x21000000..0x21ffffff : PSRAM (16MB) + * AN385 only: + * 0x00000000 .. 0x003fffff : ZBT SSRAM1 + * 0x00400000 .. 0x007fffff : mirror of ZBT SSRAM1 + * 0x20000000 .. 0x203fffff : ZBT SSRAM 2&3 + * 0x20400000 .. 0x207fffff : mirror of ZBT SSRAM 2&3 + * 0x01000000 .. 0x01003fff : block RAM (16K) + * 0x01004000 .. 0x01007fff : mirror of above + * 0x01008000 .. 0x0100bfff : mirror of above + * 0x0100c000 .. 0x0100ffff : mirror of above + * AN511 only: + * 0x00000000 .. 0x0003ffff : FPGA block RAM + * 0x00400000 .. 0x007fffff : ZBT SSRAM1 + * 0x20000000 .. 0x2001ffff : SRAM + * 0x20400000 .. 0x207fffff : ZBT SSRAM 2&3 + * + * The AN385 has a feature where the lowest 16K can be mapped + * either to the bottom of the ZBT SSRAM1 or to the block RAM. + * This is of no use for QEMU so we don't implement it (as if + * zbt_boot_ctrl is always zero). + */ + memory_region_allocate_system_memory(&mms->psram, + NULL, "mps.ram", 0x1000000); + memory_region_add_subregion(system_memory, 0x21000000, &mms->psram); + + switch (mmc->fpga_type) { + case FPGA_AN385: + make_ram(&mms->ssram1, "mps.ssram1", 0x0, 0x400000); + make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x400000); + make_ram(&mms->ssram23, "mps.ssram23", 0x20000000, 0x400000); + make_ram_alias(&mms->ssram23_m, "mps.ssram23_m", + &mms->ssram23, 0x20400000); + make_ram(&mms->blockram, "mps.blockram", 0x01000000, 0x4000); + make_ram_alias(&mms->blockram_m1, "mps.blockram_m1", + &mms->blockram, 0x01004000); + make_ram_alias(&mms->blockram_m2, "mps.blockram_m2", + &mms->blockram, 0x01008000); + make_ram_alias(&mms->blockram_m3, "mps.blockram_m3", + &mms->blockram, 0x0100c000); + break; + case FPGA_AN511: + make_ram(&mms->blockram, "mps.blockram", 0x0, 0x40000); + make_ram(&mms->ssram1, "mps.ssram1", 0x00400000, 0x00800000); + make_ram(&mms->sram, "mps.sram", 0x20000000, 0x20000); + make_ram(&mms->ssram23, "mps.ssram23", 0x20400000, 0x400000); + break; + default: + g_assert_not_reached(); + } + + object_initialize(&mms->armv7m, sizeof(mms->armv7m), TYPE_ARMV7M); + armv7m = DEVICE(&mms->armv7m); + qdev_set_parent_bus(armv7m, sysbus_get_default()); + switch (mmc->fpga_type) { + case FPGA_AN385: + qdev_prop_set_uint32(armv7m, "num-irq", 32); + break; + case FPGA_AN511: + qdev_prop_set_uint32(armv7m, "num-irq", 64); + break; + default: + g_assert_not_reached(); + } + qdev_prop_set_string(armv7m, "cpu-model", machine->cpu_model); + object_property_set_link(OBJECT(&mms->armv7m), OBJECT(system_memory), + "memory", &error_abort); + object_property_set_bool(OBJECT(&mms->armv7m), true, "realized", + &error_fatal); + + create_unimplemented_device("zbtsmram mirror", 0x00400000, 0x00400000); + create_unimplemented_device("RESERVED 1", 0x00800000, 0x00800000); + create_unimplemented_device("Block RAM", 0x01000000, 0x00010000); + create_unimplemented_device("RESERVED 2", 0x01010000, 0x1EFF0000); + create_unimplemented_device("RESERVED 3", 0x20800000, 0x00800000); + create_unimplemented_device("PSRAM", 0x21000000, 0x01000000); + /* These three ranges all cover multiple devices; we may implement + * some of them below (in which case the real device takes precedence + * over the unimplemented-region mapping). + */ + create_unimplemented_device("CMSDK APB peripheral region @0x40000000", + 0x40000000, 0x00010000); + create_unimplemented_device("CMSDK peripheral region @0x40010000", + 0x40010000, 0x00010000); + create_unimplemented_device("Extra peripheral region @0x40020000", + 0x40020000, 0x00010000); + create_unimplemented_device("RESERVED 4", 0x40030000, 0x001D0000); + create_unimplemented_device("Ethernet", 0x40200000, 0x00100000); + create_unimplemented_device("VGA", 0x41000000, 0x0200000); + + system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ; + + armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename, + 0x400000); +} + +static void mps2_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->init = mps2_common_init; + mc->max_cpus = 1; +} + +static void mps2_an385_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + MPS2MachineClass *mmc = MPS2_MACHINE_CLASS(oc); + + mc->desc = "ARM MPS2 with AN385 FPGA image for Cortex-M3"; + mmc->fpga_type = FPGA_AN385; + mmc->cpu_model = "cortex-m3"; +} + +static void mps2_an511_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + MPS2MachineClass *mmc = MPS2_MACHINE_CLASS(oc); + + mc->desc = "ARM MPS2 with AN511 DesignStart FPGA image for Cortex-M3"; + mmc->fpga_type = FPGA_AN511; + mmc->cpu_model = "cortex-m3"; +} + +static const TypeInfo mps2_info = { + .name = TYPE_MPS2_MACHINE, + .parent = TYPE_MACHINE, + .abstract = true, + .instance_size = sizeof(MPS2MachineState), + .class_size = sizeof(MPS2MachineClass), + .class_init = mps2_class_init, +}; + +static const TypeInfo mps2_an385_info = { + .name = TYPE_MPS2_AN385_MACHINE, + .parent = TYPE_MPS2_MACHINE, + .class_init = mps2_an385_class_init, +}; + +static const TypeInfo mps2_an511_info = { + .name = TYPE_MPS2_AN511_MACHINE, + .parent = TYPE_MPS2_MACHINE, + .class_init = mps2_an511_class_init, +}; + +static void mps2_machine_init(void) +{ + type_register_static(&mps2_info); + type_register_static(&mps2_an385_info); + type_register_static(&mps2_an511_info); +} + +type_init(mps2_machine_init); |