diff options
-rw-r--r-- | hw/ppc/meson.build | 1 | ||||
-rw-r--r-- | hw/ppc/pnv_i2c.c | 697 | ||||
-rw-r--r-- | include/hw/ppc/pnv_i2c.h | 38 | ||||
-rw-r--r-- | include/hw/ppc/pnv_xscom.h | 3 |
4 files changed, 739 insertions, 0 deletions
diff --git a/hw/ppc/meson.build b/hw/ppc/meson.build index 7338f9432a..ea44856d43 100644 --- a/hw/ppc/meson.build +++ b/hw/ppc/meson.build @@ -43,6 +43,7 @@ ppc_ss.add(when: 'CONFIG_POWERNV', if_true: files( 'pnv.c', 'pnv_xscom.c', 'pnv_core.c', + 'pnv_i2c.c', 'pnv_lpc.c', 'pnv_psi.c', 'pnv_occ.c', diff --git a/hw/ppc/pnv_i2c.c b/hw/ppc/pnv_i2c.c new file mode 100644 index 0000000000..f75e59e709 --- /dev/null +++ b/hw/ppc/pnv_i2c.c @@ -0,0 +1,697 @@ +/* + * QEMU PowerPC PowerNV Processor I2C model + * + * Copyright (c) 2019-2023, IBM Corporation. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "qemu/module.h" +#include "qemu/log.h" +#include "sysemu/reset.h" + +#include "hw/irq.h" +#include "hw/qdev-properties.h" + +#include "hw/ppc/pnv.h" +#include "hw/ppc/pnv_chip.h" +#include "hw/ppc/pnv_i2c.h" +#include "hw/ppc/pnv_xscom.h" +#include "hw/ppc/fdt.h" + +#include <libfdt.h> + +/* I2C FIFO register */ +#define I2C_FIFO_REG 0x4 +#define I2C_FIFO PPC_BITMASK(0, 7) + +/* I2C command register */ +#define I2C_CMD_REG 0x5 +#define I2C_CMD_WITH_START PPC_BIT(0) +#define I2C_CMD_WITH_ADDR PPC_BIT(1) +#define I2C_CMD_READ_CONT PPC_BIT(2) +#define I2C_CMD_WITH_STOP PPC_BIT(3) +#define I2C_CMD_INTR_STEERING PPC_BITMASK(6, 7) /* P9 */ +#define I2C_CMD_INTR_STEER_HOST 1 +#define I2C_CMD_INTR_STEER_OCC 2 +#define I2C_CMD_DEV_ADDR PPC_BITMASK(8, 14) +#define I2C_CMD_READ_NOT_WRITE PPC_BIT(15) +#define I2C_CMD_LEN_BYTES PPC_BITMASK(16, 31) +#define I2C_MAX_TFR_LEN 0xfff0ull + +/* I2C mode register */ +#define I2C_MODE_REG 0x6 +#define I2C_MODE_BIT_RATE_DIV PPC_BITMASK(0, 15) +#define I2C_MODE_PORT_NUM PPC_BITMASK(16, 21) +#define I2C_MODE_ENHANCED PPC_BIT(28) +#define I2C_MODE_DIAGNOSTIC PPC_BIT(29) +#define I2C_MODE_PACING_ALLOW PPC_BIT(30) +#define I2C_MODE_WRAP PPC_BIT(31) + +/* I2C watermark register */ +#define I2C_WATERMARK_REG 0x7 +#define I2C_WATERMARK_HIGH PPC_BITMASK(16, 19) +#define I2C_WATERMARK_LOW PPC_BITMASK(24, 27) + +/* + * I2C interrupt mask and condition registers + * + * NB: The function of 0x9 and 0xa changes depending on whether you're reading + * or writing to them. When read they return the interrupt condition bits + * and on writes they update the interrupt mask register. + * + * The bit definitions are the same for all the interrupt registers. + */ +#define I2C_INTR_MASK_REG 0x8 + +#define I2C_INTR_RAW_COND_REG 0x9 /* read */ +#define I2C_INTR_MASK_OR_REG 0x9 /* write*/ + +#define I2C_INTR_COND_REG 0xa /* read */ +#define I2C_INTR_MASK_AND_REG 0xa /* write */ + +#define I2C_INTR_ALL PPC_BITMASK(16, 31) +#define I2C_INTR_INVALID_CMD PPC_BIT(16) +#define I2C_INTR_LBUS_PARITY_ERR PPC_BIT(17) +#define I2C_INTR_BKEND_OVERRUN_ERR PPC_BIT(18) +#define I2C_INTR_BKEND_ACCESS_ERR PPC_BIT(19) +#define I2C_INTR_ARBT_LOST_ERR PPC_BIT(20) +#define I2C_INTR_NACK_RCVD_ERR PPC_BIT(21) +#define I2C_INTR_DATA_REQ PPC_BIT(22) +#define I2C_INTR_CMD_COMP PPC_BIT(23) +#define I2C_INTR_STOP_ERR PPC_BIT(24) +#define I2C_INTR_I2C_BUSY PPC_BIT(25) +#define I2C_INTR_NOT_I2C_BUSY PPC_BIT(26) +#define I2C_INTR_SCL_EQ_1 PPC_BIT(28) +#define I2C_INTR_SCL_EQ_0 PPC_BIT(29) +#define I2C_INTR_SDA_EQ_1 PPC_BIT(30) +#define I2C_INTR_SDA_EQ_0 PPC_BIT(31) + +/* I2C status register */ +#define I2C_RESET_I2C_REG 0xb /* write */ +#define I2C_RESET_ERRORS 0xc +#define I2C_STAT_REG 0xb /* read */ +#define I2C_STAT_INVALID_CMD PPC_BIT(0) +#define I2C_STAT_LBUS_PARITY_ERR PPC_BIT(1) +#define I2C_STAT_BKEND_OVERRUN_ERR PPC_BIT(2) +#define I2C_STAT_BKEND_ACCESS_ERR PPC_BIT(3) +#define I2C_STAT_ARBT_LOST_ERR PPC_BIT(4) +#define I2C_STAT_NACK_RCVD_ERR PPC_BIT(5) +#define I2C_STAT_DATA_REQ PPC_BIT(6) +#define I2C_STAT_CMD_COMP PPC_BIT(7) +#define I2C_STAT_STOP_ERR PPC_BIT(8) +#define I2C_STAT_UPPER_THRS PPC_BITMASK(9, 15) +#define I2C_STAT_ANY_I2C_INTR PPC_BIT(16) +#define I2C_STAT_PORT_HISTORY_BUSY PPC_BIT(19) +#define I2C_STAT_SCL_INPUT_LEVEL PPC_BIT(20) +#define I2C_STAT_SDA_INPUT_LEVEL PPC_BIT(21) +#define I2C_STAT_PORT_BUSY PPC_BIT(22) +#define I2C_STAT_INTERFACE_BUSY PPC_BIT(23) +#define I2C_STAT_FIFO_ENTRY_COUNT PPC_BITMASK(24, 31) + +#define I2C_STAT_ANY_ERR (I2C_STAT_INVALID_CMD | I2C_STAT_LBUS_PARITY_ERR | \ + I2C_STAT_BKEND_OVERRUN_ERR | \ + I2C_STAT_BKEND_ACCESS_ERR | I2C_STAT_ARBT_LOST_ERR | \ + I2C_STAT_NACK_RCVD_ERR | I2C_STAT_STOP_ERR) + + +#define I2C_INTR_ACTIVE \ + ((I2C_STAT_ANY_ERR >> 16) | I2C_INTR_CMD_COMP | I2C_INTR_DATA_REQ) + +/* Pseudo-status used for timeouts */ +#define I2C_STAT_PSEUDO_TIMEOUT PPC_BIT(63) + +/* I2C extended status register */ +#define I2C_EXTD_STAT_REG 0xc +#define I2C_EXTD_STAT_FIFO_SIZE PPC_BITMASK(0, 7) +#define I2C_EXTD_STAT_MSM_CURSTATE PPC_BITMASK(11, 15) +#define I2C_EXTD_STAT_SCL_IN_SYNC PPC_BIT(16) +#define I2C_EXTD_STAT_SDA_IN_SYNC PPC_BIT(17) +#define I2C_EXTD_STAT_S_SCL PPC_BIT(18) +#define I2C_EXTD_STAT_S_SDA PPC_BIT(19) +#define I2C_EXTD_STAT_M_SCL PPC_BIT(20) +#define I2C_EXTD_STAT_M_SDA PPC_BIT(21) +#define I2C_EXTD_STAT_HIGH_WATER PPC_BIT(22) +#define I2C_EXTD_STAT_LOW_WATER PPC_BIT(23) +#define I2C_EXTD_STAT_I2C_BUSY PPC_BIT(24) +#define I2C_EXTD_STAT_SELF_BUSY PPC_BIT(25) +#define I2C_EXTD_STAT_I2C_VERSION PPC_BITMASK(27, 31) + +/* I2C residual front end/back end length */ +#define I2C_RESIDUAL_LEN_REG 0xd +#define I2C_RESIDUAL_FRONT_END PPC_BITMASK(0, 15) +#define I2C_RESIDUAL_BACK_END PPC_BITMASK(16, 31) + +/* Port busy register */ +#define I2C_PORT_BUSY_REG 0xe +#define I2C_SET_S_SCL_REG 0xd +#define I2C_RESET_S_SCL_REG 0xf +#define I2C_SET_S_SDA_REG 0x10 +#define I2C_RESET_S_SDA_REG 0x11 + +#define PNV_I2C_FIFO_SIZE 8 + +static I2CBus *pnv_i2c_get_bus(PnvI2C *i2c) +{ + uint8_t port = GETFIELD(I2C_MODE_PORT_NUM, i2c->regs[I2C_MODE_REG]); + + if (port >= i2c->num_busses) { + qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid bus number %d/%d\n", port, + i2c->num_busses); + return NULL; + } + return i2c->busses[port]; +} + +static void pnv_i2c_update_irq(PnvI2C *i2c) +{ + I2CBus *bus = pnv_i2c_get_bus(i2c); + bool recv = !!(i2c->regs[I2C_CMD_REG] & I2C_CMD_READ_NOT_WRITE); + uint16_t front_end = GETFIELD(I2C_RESIDUAL_FRONT_END, + i2c->regs[I2C_RESIDUAL_LEN_REG]); + uint16_t back_end = GETFIELD(I2C_RESIDUAL_BACK_END, + i2c->regs[I2C_RESIDUAL_LEN_REG]); + uint8_t fifo_count = GETFIELD(I2C_STAT_FIFO_ENTRY_COUNT, + i2c->regs[I2C_STAT_REG]); + uint8_t fifo_free = PNV_I2C_FIFO_SIZE - fifo_count; + + if (!bus) { + qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n"); + return; + } + + if (i2c_bus_busy(bus)) { + i2c->regs[I2C_STAT_REG] &= ~I2C_STAT_DATA_REQ; + + if (recv) { + if (fifo_count >= + GETFIELD(I2C_WATERMARK_HIGH, i2c->regs[I2C_WATERMARK_REG])) { + i2c->regs[I2C_EXTD_STAT_REG] |= I2C_EXTD_STAT_HIGH_WATER; + } else { + i2c->regs[I2C_EXTD_STAT_REG] &= ~I2C_EXTD_STAT_HIGH_WATER; + } + + if (((i2c->regs[I2C_EXTD_STAT_REG] & I2C_EXTD_STAT_HIGH_WATER) && + fifo_count != 0) || front_end == 0) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_DATA_REQ; + } + } else { + if (fifo_count <= + GETFIELD(I2C_WATERMARK_LOW, i2c->regs[I2C_WATERMARK_REG])) { + i2c->regs[I2C_EXTD_STAT_REG] |= I2C_EXTD_STAT_LOW_WATER; + } else { + i2c->regs[I2C_EXTD_STAT_REG] &= ~I2C_EXTD_STAT_LOW_WATER; + } + + if (back_end > 0 && + (fifo_free >= back_end || + (i2c->regs[I2C_EXTD_STAT_REG] & I2C_EXTD_STAT_LOW_WATER))) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_DATA_REQ; + } + } + + if (back_end == 0 && front_end == 0) { + i2c->regs[I2C_STAT_REG] &= ~I2C_STAT_DATA_REQ; + i2c->regs[I2C_STAT_REG] |= I2C_STAT_CMD_COMP; + + if (i2c->regs[I2C_CMD_REG] & I2C_CMD_WITH_STOP) { + i2c_end_transfer(bus); + i2c->regs[I2C_EXTD_STAT_REG] &= + ~(I2C_EXTD_STAT_I2C_BUSY | I2C_EXTD_STAT_SELF_BUSY); + } + } else { + i2c->regs[I2C_STAT_REG] &= ~I2C_STAT_CMD_COMP; + } + } + + /* + * Status and interrupt registers have nearly the same layout. + */ + i2c->regs[I2C_INTR_RAW_COND_REG] = i2c->regs[I2C_STAT_REG] >> 16; + i2c->regs[I2C_INTR_COND_REG] = + i2c->regs[I2C_INTR_RAW_COND_REG] & i2c->regs[I2C_INTR_MASK_REG]; + + qemu_set_irq(i2c->psi_irq, i2c->regs[I2C_INTR_COND_REG] != 0); +} + +static void pnv_i2c_fifo_update_count(PnvI2C *i2c) +{ + uint64_t stat = i2c->regs[I2C_STAT_REG]; + + i2c->regs[I2C_STAT_REG] = SETFIELD(I2C_STAT_FIFO_ENTRY_COUNT, stat, + fifo8_num_used(&i2c->fifo)); +} + +static void pnv_i2c_frontend_update(PnvI2C *i2c) +{ + uint64_t residual_end = i2c->regs[I2C_RESIDUAL_LEN_REG]; + uint16_t front_end = GETFIELD(I2C_RESIDUAL_FRONT_END, residual_end); + + i2c->regs[I2C_RESIDUAL_LEN_REG] = + SETFIELD(I2C_RESIDUAL_FRONT_END, residual_end, front_end - 1); +} + +static void pnv_i2c_fifo_flush(PnvI2C *i2c) +{ + I2CBus *bus = pnv_i2c_get_bus(i2c); + uint8_t data; + int ret; + + if (!bus) { + qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n"); + return; + } + if (!i2c_bus_busy(bus)) { + return; + } + + if (i2c->regs[I2C_CMD_REG] & I2C_CMD_READ_NOT_WRITE) { + if (fifo8_is_full(&i2c->fifo)) { + return; + } + + data = i2c_recv(bus); + fifo8_push(&i2c->fifo, data); + } else { + if (fifo8_is_empty(&i2c->fifo)) { + return; + } + + data = fifo8_pop(&i2c->fifo); + ret = i2c_send(bus, data); + if (ret) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_NACK_RCVD_ERR; + i2c_end_transfer(bus); + } + } + + pnv_i2c_fifo_update_count(i2c); + pnv_i2c_frontend_update(i2c); +} + +static void pnv_i2c_handle_cmd(PnvI2C *i2c, uint64_t val) +{ + I2CBus *bus = pnv_i2c_get_bus(i2c); + uint8_t addr = GETFIELD(I2C_CMD_DEV_ADDR, val); + int recv = !!(val & I2C_CMD_READ_NOT_WRITE); + uint32_t len_bytes = GETFIELD(I2C_CMD_LEN_BYTES, val); + + if (!(val & I2C_CMD_WITH_START) && !(val & I2C_CMD_WITH_ADDR) && + !(val & I2C_CMD_WITH_STOP) && !len_bytes) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid command 0x%"PRIx64"\n", + val); + return; + } + + if (!(i2c->regs[I2C_STAT_REG] & I2C_STAT_CMD_COMP)) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: command in progress\n"); + return; + } + + if (!bus) { + qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n"); + return; + } + + i2c->regs[I2C_RESIDUAL_LEN_REG] = + SETFIELD(I2C_RESIDUAL_FRONT_END, 0ull, len_bytes) | + SETFIELD(I2C_RESIDUAL_BACK_END, 0ull, len_bytes); + + if (val & I2C_CMD_WITH_START) { + if (i2c_start_transfer(bus, addr, recv)) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_NACK_RCVD_ERR; + } else { + i2c->regs[I2C_EXTD_STAT_REG] |= + (I2C_EXTD_STAT_I2C_BUSY | I2C_EXTD_STAT_SELF_BUSY); + pnv_i2c_fifo_flush(i2c); + } + } +} + +static void pnv_i2c_backend_update(PnvI2C *i2c) +{ + uint64_t residual_end = i2c->regs[I2C_RESIDUAL_LEN_REG]; + uint16_t back_end = GETFIELD(I2C_RESIDUAL_BACK_END, residual_end); + + if (!back_end) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_BKEND_ACCESS_ERR; + return; + } + + i2c->regs[I2C_RESIDUAL_LEN_REG] = + SETFIELD(I2C_RESIDUAL_BACK_END, residual_end, back_end - 1); +} + +static void pnv_i2c_fifo_in(PnvI2C *i2c) +{ + uint8_t data = GETFIELD(I2C_FIFO, i2c->regs[I2C_FIFO_REG]); + I2CBus *bus = pnv_i2c_get_bus(i2c); + + if (!bus) { + qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n"); + return; + } + + if (!i2c_bus_busy(bus)) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: no command in progress\n"); + return; + } + + if (i2c->regs[I2C_CMD_REG] & I2C_CMD_READ_NOT_WRITE) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: read command in progress\n"); + return; + } + + if (fifo8_is_full(&i2c->fifo)) { + if (!(i2c->regs[I2C_MODE_REG] & I2C_MODE_PACING_ALLOW)) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_BKEND_OVERRUN_ERR; + } + return; + } + + fifo8_push(&i2c->fifo, data); + pnv_i2c_fifo_update_count(i2c); + pnv_i2c_backend_update(i2c); + pnv_i2c_fifo_flush(i2c); +} + +static void pnv_i2c_fifo_out(PnvI2C *i2c) +{ + uint8_t data; + I2CBus *bus = pnv_i2c_get_bus(i2c); + + if (!bus) { + qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n"); + return; + } + + if (!i2c_bus_busy(bus)) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: no command in progress\n"); + return; + } + + if (!(i2c->regs[I2C_CMD_REG] & I2C_CMD_READ_NOT_WRITE)) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: write command in progress\n"); + return; + } + + if (fifo8_is_empty(&i2c->fifo)) { + if (!(i2c->regs[I2C_MODE_REG] & I2C_MODE_PACING_ALLOW)) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_BKEND_OVERRUN_ERR; + } + return; + } + + data = fifo8_pop(&i2c->fifo); + + i2c->regs[I2C_FIFO_REG] = SETFIELD(I2C_FIFO, 0ull, data); + pnv_i2c_fifo_update_count(i2c); + pnv_i2c_backend_update(i2c); +} + +static uint64_t pnv_i2c_xscom_read(void *opaque, hwaddr addr, + unsigned size) +{ + PnvI2C *i2c = PNV_I2C(opaque); + uint32_t offset = addr >> 3; + uint64_t val = -1; + int i; + + switch (offset) { + case I2C_STAT_REG: + val = i2c->regs[offset]; + break; + + case I2C_FIFO_REG: + pnv_i2c_fifo_out(i2c); + val = i2c->regs[offset]; + break; + + case I2C_PORT_BUSY_REG: /* compute busy bit for each port */ + val = 0; + for (i = 0; i < i2c->num_busses; i++) { + val |= i2c_bus_busy(i2c->busses[i]) << i; + } + break; + + case I2C_CMD_REG: + case I2C_MODE_REG: + case I2C_WATERMARK_REG: + case I2C_INTR_MASK_REG: + case I2C_INTR_RAW_COND_REG: + case I2C_INTR_COND_REG: + case I2C_EXTD_STAT_REG: + case I2C_RESIDUAL_LEN_REG: + val = i2c->regs[offset]; + break; + default: + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: read at register: 0x%" + HWADDR_PRIx "\n", addr >> 3); + } + + pnv_i2c_update_irq(i2c); + + return val; +} + +static void pnv_i2c_xscom_write(void *opaque, hwaddr addr, + uint64_t val, unsigned size) +{ + PnvI2C *i2c = PNV_I2C(opaque); + uint32_t offset = addr >> 3; + + switch (offset) { + case I2C_MODE_REG: + { + i2c->regs[offset] = val; + I2CBus *bus = pnv_i2c_get_bus(i2c); + if (!bus) { + qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n"); + return; + } + if (i2c_bus_busy(bus)) { + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: command in progress\n"); + } + } + break; + + case I2C_CMD_REG: + i2c->regs[offset] = val; + pnv_i2c_handle_cmd(i2c, val); + break; + + case I2C_FIFO_REG: + i2c->regs[offset] = val; + pnv_i2c_fifo_in(i2c); + break; + + case I2C_WATERMARK_REG: + i2c->regs[offset] = val; + break; + + case I2C_RESET_I2C_REG: + i2c->regs[I2C_MODE_REG] = 0; + i2c->regs[I2C_CMD_REG] = 0; + i2c->regs[I2C_WATERMARK_REG] = 0; + i2c->regs[I2C_INTR_MASK_REG] = 0; + i2c->regs[I2C_INTR_COND_REG] = 0; + i2c->regs[I2C_INTR_RAW_COND_REG] = 0; + i2c->regs[I2C_STAT_REG] = 0; + i2c->regs[I2C_RESIDUAL_LEN_REG] = 0; + i2c->regs[I2C_EXTD_STAT_REG] &= + (I2C_EXTD_STAT_FIFO_SIZE | I2C_EXTD_STAT_I2C_VERSION); + break; + + case I2C_RESET_ERRORS: + i2c->regs[I2C_STAT_REG] &= ~I2C_STAT_ANY_ERR; + i2c->regs[I2C_RESIDUAL_LEN_REG] = 0; + i2c->regs[I2C_EXTD_STAT_REG] &= + (I2C_EXTD_STAT_FIFO_SIZE | I2C_EXTD_STAT_I2C_VERSION); + fifo8_reset(&i2c->fifo); + break; + + case I2C_INTR_MASK_REG: + i2c->regs[offset] = val; + break; + + case I2C_INTR_MASK_OR_REG: + i2c->regs[I2C_INTR_MASK_REG] |= val; + break; + + case I2C_INTR_MASK_AND_REG: + i2c->regs[I2C_INTR_MASK_REG] &= val; + break; + + case I2C_PORT_BUSY_REG: + case I2C_SET_S_SCL_REG: + case I2C_RESET_S_SCL_REG: + case I2C_SET_S_SDA_REG: + case I2C_RESET_S_SDA_REG: + i2c->regs[offset] = val; + break; + default: + i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD; + qemu_log_mask(LOG_GUEST_ERROR, "I2C: write at register: 0x%" + HWADDR_PRIx " val=0x%"PRIx64"\n", addr >> 3, val); + } + + pnv_i2c_update_irq(i2c); +} + +static const MemoryRegionOps pnv_i2c_xscom_ops = { + .read = pnv_i2c_xscom_read, + .write = pnv_i2c_xscom_write, + .valid.min_access_size = 8, + .valid.max_access_size = 8, + .impl.min_access_size = 8, + .impl.max_access_size = 8, + .endianness = DEVICE_BIG_ENDIAN, +}; + +static int pnv_i2c_bus_dt_xscom(PnvI2C *i2c, void *fdt, + int offset, int index) +{ + int i2c_bus_offset; + const char i2c_compat[] = + "ibm,opal-i2c\0ibm,power8-i2c-port\0ibm,power9-i2c-port"; + g_autofree char *i2c_port_name = NULL; + g_autofree char *name = g_strdup_printf("i2c-bus@%x", index); + + i2c_bus_offset = fdt_add_subnode(fdt, offset, name); + _FDT(i2c_bus_offset); + + _FDT((fdt_setprop_cell(fdt, i2c_bus_offset, "reg", index))); + _FDT((fdt_setprop_cell(fdt, i2c_bus_offset, "#address-cells", 1))); + _FDT((fdt_setprop_cell(fdt, i2c_bus_offset, "#size-cells", 0))); + _FDT(fdt_setprop(fdt, i2c_bus_offset, "compatible", i2c_compat, + sizeof(i2c_compat))); + _FDT((fdt_setprop_cell(fdt, i2c_bus_offset, "bus-frequency", 400000))); + + i2c_port_name = g_strdup_printf("p8_%08x_e%dp%d", i2c->chip->chip_id, + i2c->engine, index); + _FDT(fdt_setprop_string(fdt, i2c_bus_offset, "ibm,port-name", + i2c_port_name)); + return 0; +} + +#define XSCOM_BUS_FREQUENCY 466500000 +#define I2C_CLOCK_FREQUENCY (XSCOM_BUS_FREQUENCY / 4) + +static int pnv_i2c_dt_xscom(PnvXScomInterface *dev, void *fdt, + int offset) +{ + PnvI2C *i2c = PNV_I2C(dev); + int i2c_offset; + const char i2c_compat[] = "ibm,power8-i2cm\0ibm,power9-i2cm"; + uint32_t i2c_pcba = PNV9_XSCOM_I2CM_BASE + + i2c->engine * PNV9_XSCOM_I2CM_SIZE; + uint32_t reg[2] = { + cpu_to_be32(i2c_pcba), + cpu_to_be32(PNV9_XSCOM_I2CM_SIZE) + }; + int i; + g_autofree char *name = g_strdup_printf("i2cm@%x", i2c_pcba); + + i2c_offset = fdt_add_subnode(fdt, offset, name); + _FDT(i2c_offset); + + _FDT(fdt_setprop(fdt, i2c_offset, "reg", reg, sizeof(reg))); + + _FDT((fdt_setprop_cell(fdt, i2c_offset, "#address-cells", 1))); + _FDT((fdt_setprop_cell(fdt, i2c_offset, "#size-cells", 0))); + _FDT(fdt_setprop(fdt, i2c_offset, "compatible", i2c_compat, + sizeof(i2c_compat))); + _FDT((fdt_setprop_cell(fdt, i2c_offset, "chip-engine#", i2c->engine))); + _FDT((fdt_setprop_cell(fdt, i2c_offset, "clock-frequency", + I2C_CLOCK_FREQUENCY))); + + for (i = 0; i < i2c->num_busses; i++) { + pnv_i2c_bus_dt_xscom(i2c, fdt, i2c_offset, i); + } + return 0; +} + +static void pnv_i2c_reset(void *dev) +{ + PnvI2C *i2c = PNV_I2C(dev); + + memset(i2c->regs, 0, sizeof(i2c->regs)); + + i2c->regs[I2C_STAT_REG] = I2C_STAT_CMD_COMP; + i2c->regs[I2C_EXTD_STAT_REG] = + SETFIELD(I2C_EXTD_STAT_FIFO_SIZE, 0ull, PNV_I2C_FIFO_SIZE) | + SETFIELD(I2C_EXTD_STAT_I2C_VERSION, 0ull, 23); /* last version */ + + fifo8_reset(&i2c->fifo); +} + +static void pnv_i2c_realize(DeviceState *dev, Error **errp) +{ + PnvI2C *i2c = PNV_I2C(dev); + int i; + + assert(i2c->chip); + + pnv_xscom_region_init(&i2c->xscom_regs, OBJECT(i2c), &pnv_i2c_xscom_ops, + i2c, "xscom-i2c", PNV9_XSCOM_I2CM_SIZE); + + i2c->busses = g_new(I2CBus *, i2c->num_busses); + for (i = 0; i < i2c->num_busses; i++) { + char name[32]; + + snprintf(name, sizeof(name), TYPE_PNV_I2C ".%d", i); + i2c->busses[i] = i2c_init_bus(dev, name); + } + + fifo8_create(&i2c->fifo, PNV_I2C_FIFO_SIZE); + + qemu_register_reset(pnv_i2c_reset, dev); + + qdev_init_gpio_out(DEVICE(dev), &i2c->psi_irq, 1); +} + +static Property pnv_i2c_properties[] = { + DEFINE_PROP_LINK("chip", PnvI2C, chip, TYPE_PNV_CHIP, PnvChip *), + DEFINE_PROP_UINT32("engine", PnvI2C, engine, 1), + DEFINE_PROP_UINT32("num-busses", PnvI2C, num_busses, 1), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pnv_i2c_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PnvXScomInterfaceClass *xscomc = PNV_XSCOM_INTERFACE_CLASS(klass); + + xscomc->dt_xscom = pnv_i2c_dt_xscom; + + dc->desc = "PowerNV I2C"; + dc->realize = pnv_i2c_realize; + device_class_set_props(dc, pnv_i2c_properties); +} + +static const TypeInfo pnv_i2c_info = { + .name = TYPE_PNV_I2C, + .parent = TYPE_DEVICE, + .instance_size = sizeof(PnvI2C), + .class_init = pnv_i2c_class_init, + .interfaces = (InterfaceInfo[]) { + { TYPE_PNV_XSCOM_INTERFACE }, + { } + } +}; + +static void pnv_i2c_register_types(void) +{ + type_register_static(&pnv_i2c_info); +} + +type_init(pnv_i2c_register_types); diff --git a/include/hw/ppc/pnv_i2c.h b/include/hw/ppc/pnv_i2c.h new file mode 100644 index 0000000000..1a37730f1e --- /dev/null +++ b/include/hw/ppc/pnv_i2c.h @@ -0,0 +1,38 @@ +/* + * QEMU PowerPC PowerNV Processor I2C model + * + * Copyright (c) 2019-2023, IBM Corporation. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef PPC_PNV_I2C_H +#define PPC_PNV_I2C_H + +#include "hw/ppc/pnv.h" +#include "hw/i2c/i2c.h" +#include "qemu/fifo8.h" + +#define TYPE_PNV_I2C "pnv-i2c" +#define PNV_I2C(obj) OBJECT_CHECK(PnvI2C, (obj), TYPE_PNV_I2C) + +#define PNV_I2C_REGS 0x20 + +typedef struct PnvI2C { + DeviceState parent; + + struct PnvChip *chip; + + qemu_irq psi_irq; + + uint64_t regs[PNV_I2C_REGS]; + uint32_t engine; + uint32_t num_busses; + I2CBus **busses; + + MemoryRegion xscom_regs; + + Fifo8 fifo; +} PnvI2C; + +#endif /* PPC_PNV_I2C_H */ diff --git a/include/hw/ppc/pnv_xscom.h b/include/hw/ppc/pnv_xscom.h index 35b19610f7..056392ab60 100644 --- a/include/hw/ppc/pnv_xscom.h +++ b/include/hw/ppc/pnv_xscom.h @@ -90,6 +90,9 @@ struct PnvXScomInterfaceClass { ((uint64_t)(((core) & 0x1C) + 0x40) << 22) #define PNV9_XSCOM_EQ_SIZE 0x100000 +#define PNV9_XSCOM_I2CM_BASE 0xa0000 +#define PNV9_XSCOM_I2CM_SIZE 0x1000 + #define PNV9_XSCOM_OCC_BASE PNV_XSCOM_OCC_BASE #define PNV9_XSCOM_OCC_SIZE 0x8000 |