diff options
| -rw-r--r-- | disas.c | 275 | ||||
| -rw-r--r-- | disas/capstone.c | 286 | ||||
| -rw-r--r-- | disas/meson.build | 1 | ||||
| -rw-r--r-- | include/disas/dis-asm.h | 12 | ||||
| -rw-r--r-- | meson.build | 1 |
5 files changed, 300 insertions, 275 deletions
@@ -109,255 +109,6 @@ static int print_insn_od_target(bfd_vma pc, disassemble_info *info) return print_insn_objdump(pc, info, "OBJD-T"); } -#ifdef CONFIG_CAPSTONE -/* Temporary storage for the capstone library. This will be alloced via - malloc with a size private to the library; thus there's no reason not - to share this across calls and across host vs target disassembly. */ -static __thread cs_insn *cap_insn; - -/* Initialize the Capstone library. */ -/* ??? It would be nice to cache this. We would need one handle for the - host and one for the target. For most targets we can reset specific - parameters via cs_option(CS_OPT_MODE, new_mode), but we cannot change - CS_ARCH_* in this way. Thus we would need to be able to close and - re-open the target handle with a different arch for the target in order - to handle AArch64 vs AArch32 mode switching. */ -static cs_err cap_disas_start(disassemble_info *info, csh *handle) -{ - cs_mode cap_mode = info->cap_mode; - cs_err err; - - cap_mode += (info->endian == BFD_ENDIAN_BIG ? CS_MODE_BIG_ENDIAN - : CS_MODE_LITTLE_ENDIAN); - - err = cs_open(info->cap_arch, cap_mode, handle); - if (err != CS_ERR_OK) { - return err; - } - - /* ??? There probably ought to be a better place to put this. */ - if (info->cap_arch == CS_ARCH_X86) { - /* We don't care about errors (if for some reason the library - is compiled without AT&T syntax); the user will just have - to deal with the Intel syntax. */ - cs_option(*handle, CS_OPT_SYNTAX, CS_OPT_SYNTAX_ATT); - } - - /* "Disassemble" unknown insns as ".byte W,X,Y,Z". */ - cs_option(*handle, CS_OPT_SKIPDATA, CS_OPT_ON); - - /* Allocate temp space for cs_disasm_iter. */ - if (cap_insn == NULL) { - cap_insn = cs_malloc(*handle); - if (cap_insn == NULL) { - cs_close(handle); - return CS_ERR_MEM; - } - } - return CS_ERR_OK; -} - -static void cap_dump_insn_units(disassemble_info *info, cs_insn *insn, - int i, int n) -{ - fprintf_function print = info->fprintf_func; - FILE *stream = info->stream; - - switch (info->cap_insn_unit) { - case 4: - if (info->endian == BFD_ENDIAN_BIG) { - for (; i < n; i += 4) { - print(stream, " %08x", ldl_be_p(insn->bytes + i)); - - } - } else { - for (; i < n; i += 4) { - print(stream, " %08x", ldl_le_p(insn->bytes + i)); - } - } - break; - - case 2: - if (info->endian == BFD_ENDIAN_BIG) { - for (; i < n; i += 2) { - print(stream, " %04x", lduw_be_p(insn->bytes + i)); - } - } else { - for (; i < n; i += 2) { - print(stream, " %04x", lduw_le_p(insn->bytes + i)); - } - } - break; - - default: - for (; i < n; i++) { - print(stream, " %02x", insn->bytes[i]); - } - break; - } -} - -static void cap_dump_insn(disassemble_info *info, cs_insn *insn) -{ - fprintf_function print = info->fprintf_func; - int i, n, split; - - print(info->stream, "0x%08" PRIx64 ": ", insn->address); - - n = insn->size; - split = info->cap_insn_split; - - /* Dump the first SPLIT bytes of the instruction. */ - cap_dump_insn_units(info, insn, 0, MIN(n, split)); - - /* Add padding up to SPLIT so that mnemonics line up. */ - if (n < split) { - int width = (split - n) / info->cap_insn_unit; - width *= (2 * info->cap_insn_unit + 1); - print(info->stream, "%*s", width, ""); - } - - /* Print the actual instruction. */ - print(info->stream, " %-8s %s\n", insn->mnemonic, insn->op_str); - - /* Dump any remaining part of the insn on subsequent lines. */ - for (i = split; i < n; i += split) { - print(info->stream, "0x%08" PRIx64 ": ", insn->address + i); - cap_dump_insn_units(info, insn, i, MIN(n, i + split)); - print(info->stream, "\n"); - } -} - -/* Disassemble SIZE bytes at PC for the target. */ -static bool cap_disas_target(disassemble_info *info, uint64_t pc, size_t size) -{ - uint8_t cap_buf[1024]; - csh handle; - cs_insn *insn; - size_t csize = 0; - - if (cap_disas_start(info, &handle) != CS_ERR_OK) { - return false; - } - insn = cap_insn; - - while (1) { - size_t tsize = MIN(sizeof(cap_buf) - csize, size); - const uint8_t *cbuf = cap_buf; - - target_read_memory(pc + csize, cap_buf + csize, tsize, info); - csize += tsize; - size -= tsize; - - while (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) { - cap_dump_insn(info, insn); - } - - /* If the target memory is not consumed, go back for more... */ - if (size != 0) { - /* ... taking care to move any remaining fractional insn - to the beginning of the buffer. */ - if (csize != 0) { - memmove(cap_buf, cbuf, csize); - } - continue; - } - - /* Since the target memory is consumed, we should not have - a remaining fractional insn. */ - if (csize != 0) { - (*info->fprintf_func)(info->stream, - "Disassembler disagrees with translator " - "over instruction decoding\n" - "Please report this to qemu-devel@nongnu.org\n"); - } - break; - } - - cs_close(&handle); - return true; -} - -/* Disassemble SIZE bytes at CODE for the host. */ -static bool cap_disas_host(disassemble_info *info, void *code, size_t size) -{ - csh handle; - const uint8_t *cbuf; - cs_insn *insn; - uint64_t pc; - - if (cap_disas_start(info, &handle) != CS_ERR_OK) { - return false; - } - insn = cap_insn; - - cbuf = code; - pc = (uintptr_t)code; - - while (cs_disasm_iter(handle, &cbuf, &size, &pc, insn)) { - cap_dump_insn(info, insn); - } - if (size != 0) { - (*info->fprintf_func)(info->stream, - "Disassembler disagrees with TCG over instruction encoding\n" - "Please report this to qemu-devel@nongnu.org\n"); - } - - cs_close(&handle); - return true; -} - -#if !defined(CONFIG_USER_ONLY) -/* Disassemble COUNT insns at PC for the target. */ -static bool cap_disas_monitor(disassemble_info *info, uint64_t pc, int count) -{ - uint8_t cap_buf[32]; - csh handle; - cs_insn *insn; - size_t csize = 0; - - if (cap_disas_start(info, &handle) != CS_ERR_OK) { - return false; - } - insn = cap_insn; - - while (1) { - /* We want to read memory for one insn, but generically we do not - know how much memory that is. We have a small buffer which is - known to be sufficient for all supported targets. Try to not - read beyond the page, Just In Case. For even more simplicity, - ignore the actual target page size and use a 1k boundary. If - that turns out to be insufficient, we'll come back around the - loop and read more. */ - uint64_t epc = QEMU_ALIGN_UP(pc + csize + 1, 1024); - size_t tsize = MIN(sizeof(cap_buf) - csize, epc - pc); - const uint8_t *cbuf = cap_buf; - - /* Make certain that we can make progress. */ - assert(tsize != 0); - info->read_memory_func(pc, cap_buf + csize, tsize, info); - csize += tsize; - - if (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) { - cap_dump_insn(info, insn); - if (--count <= 0) { - break; - } - } - memmove(cap_buf, cbuf, csize); - } - - cs_close(&handle); - return true; -} -#endif /* !CONFIG_USER_ONLY */ -#else -# define cap_disas_target(i, p, s) false -# define cap_disas_host(i, p, s) false -# define cap_disas_monitor(i, p, c) false -# define cap_disas_plugin(i, p, c) false -#endif /* CONFIG_CAPSTONE */ - static void initialize_debug(CPUDebug *s) { memset(s, 0, sizeof(*s)); @@ -515,32 +266,6 @@ static void plugin_print_address(bfd_vma addr, struct disassemble_info *info) } -#ifdef CONFIG_CAPSTONE -/* Disassemble a single instruction directly into plugin output */ -static -bool cap_disas_plugin(disassemble_info *info, uint64_t pc, size_t size) -{ - uint8_t cap_buf[64]; - const uint8_t *cbuf = cap_buf; - csh handle; - - if (cap_disas_start(info, &handle) != CS_ERR_OK) { - return false; - } - - assert(size < sizeof(cap_buf)); - target_read_memory(pc, cap_buf, size, info); - - if (cs_disasm_iter(handle, &cbuf, &size, &pc, cap_insn)) { - GString *s = (GString *)info->stream; - g_string_printf(s, "%s %s", cap_insn->mnemonic, cap_insn->op_str); - } - - cs_close(&handle); - return true; -} -#endif - /* * We should only be dissembling one instruction at a time here. If * there is left over it usually indicates the front end has read more diff --git a/disas/capstone.c b/disas/capstone.c new file mode 100644 index 0000000000..b48f83958d --- /dev/null +++ b/disas/capstone.c @@ -0,0 +1,286 @@ +/* + * Interface to the capstone disassembler. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "qemu/bswap.h" +#include "disas/dis-asm.h" +#include "disas/capstone.h" + + +/* + * Temporary storage for the capstone library. This will be alloced via + * malloc with a size private to the library; thus there's no reason not + * to share this across calls and across host vs target disassembly. + */ +static __thread cs_insn *cap_insn; + +/* + * Initialize the Capstone library. + * + * ??? It would be nice to cache this. We would need one handle for the + * host and one for the target. For most targets we can reset specific + * parameters via cs_option(CS_OPT_MODE, new_mode), but we cannot change + * CS_ARCH_* in this way. Thus we would need to be able to close and + * re-open the target handle with a different arch for the target in order + * to handle AArch64 vs AArch32 mode switching. + */ +static cs_err cap_disas_start(disassemble_info *info, csh *handle) +{ + cs_mode cap_mode = info->cap_mode; + cs_err err; + + cap_mode += (info->endian == BFD_ENDIAN_BIG ? CS_MODE_BIG_ENDIAN + : CS_MODE_LITTLE_ENDIAN); + + err = cs_open(info->cap_arch, cap_mode, handle); + if (err != CS_ERR_OK) { + return err; + } + + /* "Disassemble" unknown insns as ".byte W,X,Y,Z". */ + cs_option(*handle, CS_OPT_SKIPDATA, CS_OPT_ON); + + if (info->cap_arch == CS_ARCH_X86) { + /* + * We don't care about errors (if for some reason the library + * is compiled without AT&T syntax); the user will just have + * to deal with the Intel syntax. + */ + cs_option(*handle, CS_OPT_SYNTAX, CS_OPT_SYNTAX_ATT); + } + + /* Allocate temp space for cs_disasm_iter. */ + if (cap_insn == NULL) { + cap_insn = cs_malloc(*handle); + if (cap_insn == NULL) { + cs_close(handle); + return CS_ERR_MEM; + } + } + return CS_ERR_OK; +} + +static void cap_dump_insn_units(disassemble_info *info, cs_insn *insn, + int i, int n) +{ + fprintf_function print = info->fprintf_func; + FILE *stream = info->stream; + + switch (info->cap_insn_unit) { + case 4: + if (info->endian == BFD_ENDIAN_BIG) { + for (; i < n; i += 4) { + print(stream, " %08x", ldl_be_p(insn->bytes + i)); + + } + } else { + for (; i < n; i += 4) { + print(stream, " %08x", ldl_le_p(insn->bytes + i)); + } + } + break; + + case 2: + if (info->endian == BFD_ENDIAN_BIG) { + for (; i < n; i += 2) { + print(stream, " %04x", lduw_be_p(insn->bytes + i)); + } + } else { + for (; i < n; i += 2) { + print(stream, " %04x", lduw_le_p(insn->bytes + i)); + } + } + break; + + default: + for (; i < n; i++) { + print(stream, " %02x", insn->bytes[i]); + } + break; + } +} + +static void cap_dump_insn(disassemble_info *info, cs_insn *insn) +{ + fprintf_function print = info->fprintf_func; + FILE *stream = info->stream; + int i, n, split; + + print(stream, "0x%08" PRIx64 ": ", insn->address); + + n = insn->size; + split = info->cap_insn_split; + + /* Dump the first SPLIT bytes of the instruction. */ + cap_dump_insn_units(info, insn, 0, MIN(n, split)); + + /* Add padding up to SPLIT so that mnemonics line up. */ + if (n < split) { + int width = (split - n) / info->cap_insn_unit; + width *= (2 * info->cap_insn_unit + 1); + print(stream, "%*s", width, ""); + } + + /* Print the actual instruction. */ + print(stream, " %-8s %s\n", insn->mnemonic, insn->op_str); + + /* Dump any remaining part of the insn on subsequent lines. */ + for (i = split; i < n; i += split) { + print(stream, "0x%08" PRIx64 ": ", insn->address + i); + cap_dump_insn_units(info, insn, i, MIN(n, i + split)); + print(stream, "\n"); + } +} + +/* Disassemble SIZE bytes at PC for the target. */ +bool cap_disas_target(disassemble_info *info, uint64_t pc, size_t size) +{ + uint8_t cap_buf[1024]; + csh handle; + cs_insn *insn; + size_t csize = 0; + + if (cap_disas_start(info, &handle) != CS_ERR_OK) { + return false; + } + insn = cap_insn; + + while (1) { + size_t tsize = MIN(sizeof(cap_buf) - csize, size); + const uint8_t *cbuf = cap_buf; + + info->read_memory_func(pc + csize, cap_buf + csize, tsize, info); + csize += tsize; + size -= tsize; + + while (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) { + cap_dump_insn(info, insn); + } + + /* If the target memory is not consumed, go back for more... */ + if (size != 0) { + /* + * ... taking care to move any remaining fractional insn + * to the beginning of the buffer. + */ + if (csize != 0) { + memmove(cap_buf, cbuf, csize); + } + continue; + } + + /* + * Since the target memory is consumed, we should not have + * a remaining fractional insn. + */ + if (csize != 0) { + info->fprintf_func(info->stream, + "Disassembler disagrees with translator " + "over instruction decoding\n" + "Please report this to qemu-devel@nongnu.org\n"); + } + break; + } + + cs_close(&handle); + return true; +} + +/* Disassemble SIZE bytes at CODE for the host. */ +bool cap_disas_host(disassemble_info *info, void *code, size_t size) +{ + csh handle; + const uint8_t *cbuf; + cs_insn *insn; + uint64_t pc; + + if (cap_disas_start(info, &handle) != CS_ERR_OK) { + return false; + } + insn = cap_insn; + + cbuf = code; + pc = (uintptr_t)code; + + while (cs_disasm_iter(handle, &cbuf, &size, &pc, insn)) { + cap_dump_insn(info, insn); + } + if (size != 0) { + info->fprintf_func(info->stream, + "Disassembler disagrees with TCG over instruction encoding\n" + "Please report this to qemu-devel@nongnu.org\n"); + } + + cs_close(&handle); + return true; +} + +/* Disassemble COUNT insns at PC for the target. */ +bool cap_disas_monitor(disassemble_info *info, uint64_t pc, int count) +{ + uint8_t cap_buf[32]; + csh handle; + cs_insn *insn; + size_t csize = 0; + + if (cap_disas_start(info, &handle) != CS_ERR_OK) { + return false; + } + insn = cap_insn; + + while (1) { + /* + * We want to read memory for one insn, but generically we do not + * know how much memory that is. We have a small buffer which is + * known to be sufficient for all supported targets. Try to not + * read beyond the page, Just In Case. For even more simplicity, + * ignore the actual target page size and use a 1k boundary. If + * that turns out to be insufficient, we'll come back around the + * loop and read more. + */ + uint64_t epc = QEMU_ALIGN_UP(pc + csize + 1, 1024); + size_t tsize = MIN(sizeof(cap_buf) - csize, epc - pc); + const uint8_t *cbuf = cap_buf; + + /* Make certain that we can make progress. */ + assert(tsize != 0); + info->read_memory_func(pc, cap_buf + csize, tsize, info); + csize += tsize; + + if (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) { + cap_dump_insn(info, insn); + if (--count <= 0) { + break; + } + } + memmove(cap_buf, cbuf, csize); + } + + cs_close(&handle); + return true; +} + +/* Disassemble a single instruction directly into plugin output */ +bool cap_disas_plugin(disassemble_info *info, uint64_t pc, size_t size) +{ + uint8_t cap_buf[32]; + const uint8_t *cbuf = cap_buf; + csh handle; + + if (cap_disas_start(info, &handle) != CS_ERR_OK) { + return false; + } + + assert(size < sizeof(cap_buf)); + info->read_memory_func(pc, cap_buf, size, info); + + if (cs_disasm_iter(handle, &cbuf, &size, &pc, cap_insn)) { + info->fprintf_func(info->stream, "%s %s", + cap_insn->mnemonic, cap_insn->op_str); + } + + cs_close(&handle); + return true; +} diff --git a/disas/meson.build b/disas/meson.build index bde8280c73..09a852742e 100644 --- a/disas/meson.build +++ b/disas/meson.build @@ -21,5 +21,6 @@ common_ss.add(when: 'CONFIG_S390_DIS', if_true: files('s390.c')) common_ss.add(when: 'CONFIG_SH4_DIS', if_true: files('sh4.c')) common_ss.add(when: 'CONFIG_SPARC_DIS', if_true: files('sparc.c')) common_ss.add(when: 'CONFIG_XTENSA_DIS', if_true: files('xtensa.c')) +common_ss.add(when: capstone, if_true: files('capstone.c')) specific_ss.add(when: 'CONFIG_TCG_INTERPRETER', if_true: files('tci.c')) diff --git a/include/disas/dis-asm.h b/include/disas/dis-asm.h index 6b45aa9898..2164762b46 100644 --- a/include/disas/dis-asm.h +++ b/include/disas/dis-asm.h @@ -460,6 +460,18 @@ int print_insn_riscv32 (bfd_vma, disassemble_info*); int print_insn_riscv64 (bfd_vma, disassemble_info*); int print_insn_rx(bfd_vma, disassemble_info *); +#ifdef CONFIG_CAPSTONE +bool cap_disas_target(disassemble_info *info, uint64_t pc, size_t size); +bool cap_disas_host(disassemble_info *info, void *code, size_t size); +bool cap_disas_monitor(disassemble_info *info, uint64_t pc, int count); +bool cap_disas_plugin(disassemble_info *info, uint64_t pc, size_t size); +#else +# define cap_disas_target(i, p, s) false +# define cap_disas_host(i, p, s) false +# define cap_disas_monitor(i, p, c) false +# define cap_disas_plugin(i, p, c) false +#endif /* CONFIG_CAPSTONE */ + #ifndef ATTRIBUTE_UNUSED #define ATTRIBUTE_UNUSED __attribute__((unused)) #endif diff --git a/meson.build b/meson.build index ccad7cabf1..bb13fcf98c 100644 --- a/meson.build +++ b/meson.build @@ -1104,6 +1104,7 @@ common_ss.add(files('cpus-common.c')) subdir('softmmu') +common_ss.add(capstone) specific_ss.add(files('disas.c', 'exec.c', 'gdbstub.c'), capstone, libpmem, libdaxctl) specific_ss.add(files('exec-vary.c')) specific_ss.add(when: 'CONFIG_TCG', if_true: files( |