diff options
| -rw-r--r-- | docs/qemupciserial.inf | 109 |
1 files changed, 109 insertions, 0 deletions
diff --git a/docs/qemupciserial.inf b/docs/qemupciserial.inf new file mode 100644 index 0000000000..3474310a4b --- /dev/null +++ b/docs/qemupciserial.inf @@ -0,0 +1,109 @@ +; qemupciserial.inf for QEMU, based on MSPORTS.INF + +; The driver itself is shipped with Windows (serial.sys). This is +; just a inf file to tell windows which pci id the serial pci card +; emulated by qemu has, and to apply a name tag to it which windows +; will show in the device manager. + +; Installing the driver: Go to device manager. You should find a "pci +; serial card" tagged with a yellow question mark. Open properties. +; Pick "update driver". Then "select driver manually". Pick "Ports +; (Com+Lpt)" from the list. Click "Have a disk". Select this file. +; Procedure may vary a bit depending on the windows version. + +; FIXME: This file covers the single port version only. + +[Version] +Signature="$CHICAGO$" +Class=Ports +ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} +Provider=%QEMU% +DriverVer=09/24/2012,1.3.0 + +[SourceDisksNames] +3426=windows cd + +[SourceDisksFiles] +serial.sys = 3426 +serenum.sys = 3426 + +[DestinationDirs] +DefaultDestDir = 11 ;LDID_SYS +ComPort.NT.Copy = 12 ;DIRID_DRIVERS +SerialEnumerator.NT.Copy=12 ;DIRID_DRIVERS + +; Drivers +;---------------------------------------------------------- +[Manufacturer] +%QEMU%=QEMU,NTx86 + +[QEMU.NTx86] +%QEMU-PCI_SERIAL.DeviceDesc% = ComPort, "PCI\VEN_1b36&DEV_0002&CC_0700" + +; COM sections +;---------------------------------------------------------- +[ComPort.AddReg] +HKR,,PortSubClass,1,01 + +[ComPort.NT] +AddReg=ComPort.AddReg, ComPort.NT.AddReg +LogConfig=caa +SyssetupPnPFlags = 1 + +[ComPort.NT.HW] +AddReg=ComPort.NT.HW.AddReg + +[ComPort.NT.AddReg] +HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" + +[ComPort.NT.HW.AddReg] +HKR,,"UpperFilters",0x00010000,"serenum" + +;-------------- Service installation +; Port Driver (function driver for this device) +[ComPort.NT.Services] +AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst +AddService = Serenum,,Serenum_Service_Inst + +; -------------- Serial Port Driver install sections +[Serial_Service_Inst] +DisplayName = %Serial.SVCDESC% +ServiceType = 1 ; SERVICE_KERNEL_DRIVER +StartType = 1 ; SERVICE_SYSTEM_START (this driver may do detection) +ErrorControl = 0 ; SERVICE_ERROR_IGNORE +ServiceBinary = %12%\serial.sys +LoadOrderGroup = Extended base + +; -------------- Serenum Driver install section +[Serenum_Service_Inst] +DisplayName = %Serenum.SVCDESC% +ServiceType = 1 ; SERVICE_KERNEL_DRIVER +StartType = 3 ; SERVICE_DEMAND_START +ErrorControl = 1 ; SERVICE_ERROR_NORMAL +ServiceBinary = %12%\serenum.sys +LoadOrderGroup = PNP Filter + +[Serial_EventLog_Inst] +AddReg = Serial_EventLog_AddReg + +[Serial_EventLog_AddReg] +HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\serial.sys" +HKR,,TypesSupported,0x00010001,7 + +; The following sections are COM port resource configs. +; Section name format means: +; Char 1 = c (COM port) +; Char 2 = I/O config: 1 (3f8), 2 (2f8), 3 (3e8), 4 (2e8), a (any) +; Char 3 = IRQ config: #, a (any) + +[caa] ; Any base, any IRQ +ConfigPriority=HARDRECONFIG +IOConfig=8@100-ffff%fff8(3ff::) +IRQConfig=S:3,4,5,7,9,10,11,12,14,15 + +[Strings] +QEMU="QEMU" +QEMU-PCI_SERIAL.DeviceDesc="QEMU Serial PCI Card" + +Serial.SVCDESC = "Serial port driver" +Serenum.SVCDESC = "Serenum Filter Driver" |