diff options
| -rw-r--r-- | tests/Makefile | 7 | ||||
| -rw-r--r-- | tests/rcutorture.c | 449 |
2 files changed, 455 insertions, 1 deletions
diff --git a/tests/Makefile b/tests/Makefile index c2e2e52f22..db5b3c3df1 100644 --- a/tests/Makefile +++ b/tests/Makefile @@ -60,6 +60,8 @@ gcov-files-test-mul64-y = util/host-utils.c check-unit-y += tests/test-int128$(EXESUF) # all code tested by test-int128 is inside int128.h gcov-files-test-int128-y = +check-unit-y += tests/rcutorture$(EXESUF) +gcov-files-rcutorture-y = util/rcu.c check-unit-y += tests/test-bitops$(EXESUF) check-unit-$(CONFIG_HAS_GLIB_SUBPROCESS_TESTS) += tests/test-qdev-global-props$(EXESUF) check-unit-y += tests/check-qom-interface$(EXESUF) @@ -223,7 +225,8 @@ test-obj-y = tests/check-qint.o tests/check-qstring.o tests/check-qdict.o \ tests/test-qmp-input-visitor.o tests/test-qmp-input-strict.o \ tests/test-qmp-commands.o tests/test-visitor-serialization.o \ tests/test-x86-cpuid.o tests/test-mul64.o tests/test-int128.o \ - tests/test-opts-visitor.o tests/test-qmp-event.o + tests/test-opts-visitor.o tests/test-qmp-event.o \ + tests/rcutorture.o test-qapi-obj-y = tests/test-qapi-visit.o tests/test-qapi-types.o \ tests/test-qapi-event.o @@ -252,6 +255,8 @@ tests/test-x86-cpuid$(EXESUF): tests/test-x86-cpuid.o tests/test-xbzrle$(EXESUF): tests/test-xbzrle.o migration/xbzrle.o page_cache.o libqemuutil.a tests/test-cutils$(EXESUF): tests/test-cutils.o util/cutils.o tests/test-int128$(EXESUF): tests/test-int128.o +tests/rcutorture$(EXESUF): tests/rcutorture.o libqemuutil.a + tests/test-qdev-global-props$(EXESUF): tests/test-qdev-global-props.o \ hw/core/qdev.o hw/core/qdev-properties.o hw/core/hotplug.o\ hw/core/irq.o \ diff --git a/tests/rcutorture.c b/tests/rcutorture.c new file mode 100644 index 0000000000..cb7841105f --- /dev/null +++ b/tests/rcutorture.c @@ -0,0 +1,449 @@ +/* + * rcutorture.c: simple user-level performance/stress test of RCU. + * + * Usage: + * ./rcu <nreaders> rperf [ <seconds> ] + * Run a read-side performance test with the specified + * number of readers for <seconds> seconds. + * ./rcu <nupdaters> uperf [ <seconds> ] + * Run an update-side performance test with the specified + * number of updaters and specified duration. + * ./rcu <nreaders> perf [ <seconds> ] + * Run a combined read/update performance test with the specified + * number of readers and one updater and specified duration. + * + * The above tests produce output as follows: + * + * n_reads: 46008000 n_updates: 146026 nreaders: 2 nupdaters: 1 duration: 1 + * ns/read: 43.4707 ns/update: 6848.1 + * + * The first line lists the total number of RCU reads and updates executed + * during the test, the number of reader threads, the number of updater + * threads, and the duration of the test in seconds. The second line + * lists the average duration of each type of operation in nanoseconds, + * or "nan" if the corresponding type of operation was not performed. + * + * ./rcu <nreaders> stress [ <seconds> ] + * Run a stress test with the specified number of readers and + * one updater. + * + * This test produces output as follows: + * + * n_reads: 114633217 n_updates: 3903415 n_mberror: 0 + * rcu_stress_count: 114618391 14826 0 0 0 0 0 0 0 0 0 + * + * The first line lists the number of RCU read and update operations + * executed, followed by the number of memory-ordering violations + * (which will be zero in a correct RCU implementation). The second + * line lists the number of readers observing progressively more stale + * data. A correct RCU implementation will have all but the first two + * numbers non-zero. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (c) 2008 Paul E. McKenney, IBM Corporation. + */ + +/* + * Test variables. + */ + +#include <glib.h> +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include "qemu/atomic.h" +#include "qemu/rcu.h" +#include "qemu/compiler.h" +#include "qemu/thread.h" + +long long n_reads = 0LL; +long n_updates = 0L; +int nthreadsrunning; + +#define GOFLAG_INIT 0 +#define GOFLAG_RUN 1 +#define GOFLAG_STOP 2 + +static volatile int goflag = GOFLAG_INIT; + +#define RCU_READ_RUN 1000 + +#define NR_THREADS 100 +static QemuThread threads[NR_THREADS]; +static struct rcu_reader_data *data[NR_THREADS]; +static int n_threads; + +static void create_thread(void *(*func)(void *)) +{ + if (n_threads >= NR_THREADS) { + fprintf(stderr, "Thread limit of %d exceeded!\n", NR_THREADS); + exit(-1); + } + qemu_thread_create(&threads[n_threads], "test", func, &data[n_threads], + QEMU_THREAD_JOINABLE); + n_threads++; +} + +static void wait_all_threads(void) +{ + int i; + + for (i = 0; i < n_threads; i++) { + qemu_thread_join(&threads[i]); + } + n_threads = 0; +} + +/* + * Performance test. + */ + +static void *rcu_read_perf_test(void *arg) +{ + int i; + long long n_reads_local = 0; + + rcu_register_thread(); + + *(struct rcu_reader_data **)arg = &rcu_reader; + atomic_inc(&nthreadsrunning); + while (goflag == GOFLAG_INIT) { + g_usleep(1000); + } + while (goflag == GOFLAG_RUN) { + for (i = 0; i < RCU_READ_RUN; i++) { + rcu_read_lock(); + rcu_read_unlock(); + } + n_reads_local += RCU_READ_RUN; + } + atomic_add(&n_reads, n_reads_local); + + rcu_unregister_thread(); + return NULL; +} + +static void *rcu_update_perf_test(void *arg) +{ + long long n_updates_local = 0; + + rcu_register_thread(); + + *(struct rcu_reader_data **)arg = &rcu_reader; + atomic_inc(&nthreadsrunning); + while (goflag == GOFLAG_INIT) { + g_usleep(1000); + } + while (goflag == GOFLAG_RUN) { + synchronize_rcu(); + n_updates_local++; + } + atomic_add(&n_updates, n_updates_local); + + rcu_unregister_thread(); + return NULL; +} + +static void perftestinit(void) +{ + nthreadsrunning = 0; +} + +static void perftestrun(int nthreads, int duration, int nreaders, int nupdaters) +{ + while (atomic_read(&nthreadsrunning) < nthreads) { + g_usleep(1000); + } + goflag = GOFLAG_RUN; + g_usleep(duration * G_USEC_PER_SEC); + goflag = GOFLAG_STOP; + wait_all_threads(); + printf("n_reads: %lld n_updates: %ld nreaders: %d nupdaters: %d duration: %d\n", + n_reads, n_updates, nreaders, nupdaters, duration); + printf("ns/read: %g ns/update: %g\n", + ((duration * 1000*1000*1000.*(double)nreaders) / + (double)n_reads), + ((duration * 1000*1000*1000.*(double)nupdaters) / + (double)n_updates)); + exit(0); +} + +static void perftest(int nreaders, int duration) +{ + int i; + + perftestinit(); + for (i = 0; i < nreaders; i++) { + create_thread(rcu_read_perf_test); + } + create_thread(rcu_update_perf_test); + perftestrun(i + 1, duration, nreaders, 1); +} + +static void rperftest(int nreaders, int duration) +{ + int i; + + perftestinit(); + for (i = 0; i < nreaders; i++) { + create_thread(rcu_read_perf_test); + } + perftestrun(i, duration, nreaders, 0); +} + +static void uperftest(int nupdaters, int duration) +{ + int i; + + perftestinit(); + for (i = 0; i < nupdaters; i++) { + create_thread(rcu_update_perf_test); + } + perftestrun(i, duration, 0, nupdaters); +} + +/* + * Stress test. + */ + +#define RCU_STRESS_PIPE_LEN 10 + +struct rcu_stress { + int pipe_count; + int mbtest; +}; + +struct rcu_stress rcu_stress_array[RCU_STRESS_PIPE_LEN] = { { 0 } }; +struct rcu_stress *rcu_stress_current; +int rcu_stress_idx; + +int n_mberror; +long long rcu_stress_count[RCU_STRESS_PIPE_LEN + 1]; + + +static void *rcu_read_stress_test(void *arg) +{ + int i; + int itercnt = 0; + struct rcu_stress *p; + int pc; + long long n_reads_local = 0; + volatile int garbage = 0; + + rcu_register_thread(); + + *(struct rcu_reader_data **)arg = &rcu_reader; + while (goflag == GOFLAG_INIT) { + g_usleep(1000); + } + while (goflag == GOFLAG_RUN) { + rcu_read_lock(); + p = atomic_rcu_read(&rcu_stress_current); + if (p->mbtest == 0) { + n_mberror++; + } + for (i = 0; i < 100; i++) { + garbage++; + } + pc = p->pipe_count; + rcu_read_unlock(); + if ((pc > RCU_STRESS_PIPE_LEN) || (pc < 0)) { + pc = RCU_STRESS_PIPE_LEN; + } + atomic_inc(&rcu_stress_count[pc]); + n_reads_local++; + if ((++itercnt % 0x1000) == 0) { + synchronize_rcu(); + } + } + atomic_add(&n_reads, n_reads_local); + + rcu_unregister_thread(); + return NULL; +} + +static void *rcu_update_stress_test(void *arg) +{ + int i; + struct rcu_stress *p; + + rcu_register_thread(); + + *(struct rcu_reader_data **)arg = &rcu_reader; + while (goflag == GOFLAG_INIT) { + g_usleep(1000); + } + while (goflag == GOFLAG_RUN) { + i = rcu_stress_idx + 1; + if (i >= RCU_STRESS_PIPE_LEN) { + i = 0; + } + p = &rcu_stress_array[i]; + p->mbtest = 0; + smp_mb(); + p->pipe_count = 0; + p->mbtest = 1; + atomic_rcu_set(&rcu_stress_current, p); + rcu_stress_idx = i; + for (i = 0; i < RCU_STRESS_PIPE_LEN; i++) { + if (i != rcu_stress_idx) { + rcu_stress_array[i].pipe_count++; + } + } + synchronize_rcu(); + n_updates++; + } + + rcu_unregister_thread(); + return NULL; +} + +static void *rcu_fake_update_stress_test(void *arg) +{ + rcu_register_thread(); + + *(struct rcu_reader_data **)arg = &rcu_reader; + while (goflag == GOFLAG_INIT) { + g_usleep(1000); + } + while (goflag == GOFLAG_RUN) { + synchronize_rcu(); + g_usleep(1000); + } + + rcu_unregister_thread(); + return NULL; +} + +static void stresstest(int nreaders, int duration) +{ + int i; + + rcu_stress_current = &rcu_stress_array[0]; + rcu_stress_current->pipe_count = 0; + rcu_stress_current->mbtest = 1; + for (i = 0; i < nreaders; i++) { + create_thread(rcu_read_stress_test); + } + create_thread(rcu_update_stress_test); + for (i = 0; i < 5; i++) { + create_thread(rcu_fake_update_stress_test); + } + goflag = GOFLAG_RUN; + g_usleep(duration * G_USEC_PER_SEC); + goflag = GOFLAG_STOP; + wait_all_threads(); + printf("n_reads: %lld n_updates: %ld n_mberror: %d\n", + n_reads, n_updates, n_mberror); + printf("rcu_stress_count:"); + for (i = 0; i <= RCU_STRESS_PIPE_LEN; i++) { + printf(" %lld", rcu_stress_count[i]); + } + printf("\n"); + exit(0); +} + +/* GTest interface */ + +static void gtest_stress(int nreaders, int duration) +{ + int i; + + rcu_stress_current = &rcu_stress_array[0]; + rcu_stress_current->pipe_count = 0; + rcu_stress_current->mbtest = 1; + for (i = 0; i < nreaders; i++) { + create_thread(rcu_read_stress_test); + } + create_thread(rcu_update_stress_test); + for (i = 0; i < 5; i++) { + create_thread(rcu_fake_update_stress_test); + } + goflag = GOFLAG_RUN; + g_usleep(duration * G_USEC_PER_SEC); + goflag = GOFLAG_STOP; + wait_all_threads(); + g_assert_cmpint(n_mberror, ==, 0); + for (i = 2; i <= RCU_STRESS_PIPE_LEN; i++) { + g_assert_cmpint(rcu_stress_count[i], ==, 0); + } +} + +static void gtest_stress_1_1(void) +{ + gtest_stress(1, 1); +} + +static void gtest_stress_10_1(void) +{ + gtest_stress(10, 1); +} + +static void gtest_stress_1_5(void) +{ + gtest_stress(1, 5); +} + +static void gtest_stress_10_5(void) +{ + gtest_stress(10, 5); +} + +/* + * Mainprogram. + */ + +static void usage(int argc, char *argv[]) +{ + fprintf(stderr, "Usage: %s [nreaders [ perf | stress ] ]\n", argv[0]); + exit(-1); +} + +int main(int argc, char *argv[]) +{ + int nreaders = 1; + int duration = 1; + + if (argc >= 2 && argv[1][0] == '-') { + g_test_init(&argc, &argv, NULL); + if (g_test_quick()) { + g_test_add_func("/rcu/torture/1reader", gtest_stress_1_1); + g_test_add_func("/rcu/torture/10readers", gtest_stress_10_1); + } else { + g_test_add_func("/rcu/torture/1reader", gtest_stress_1_5); + g_test_add_func("/rcu/torture/10readers", gtest_stress_10_5); + } + return g_test_run(); + } + + if (argc >= 2) { + nreaders = strtoul(argv[1], NULL, 0); + } + if (argc > 3) { + duration = strtoul(argv[3], NULL, 0); + } + if (argc < 3 || strcmp(argv[2], "stress") == 0) { + stresstest(nreaders, duration); + } else if (strcmp(argv[2], "rperf") == 0) { + rperftest(nreaders, duration); + } else if (strcmp(argv[2], "uperf") == 0) { + uperftest(nreaders, duration); + } else if (strcmp(argv[2], "perf") == 0) { + perftest(nreaders, duration); + } + usage(argc, argv); + return 0; +} |