diff options
| -rw-r--r-- | block.c | 2 | ||||
| -rw-r--r-- | block/backup.c | 4 | ||||
| -rw-r--r-- | block/curl.c | 2 | ||||
| -rw-r--r-- | block/gluster.c | 2 | ||||
| -rw-r--r-- | block/vhdx.c | 2 | ||||
| -rw-r--r-- | block/vvfat.c | 4 | ||||
| -rw-r--r-- | hw/arm/spitz.c | 15 | ||||
| -rw-r--r-- | hw/intc/exynos4210_gic.c | 6 | ||||
| -rw-r--r-- | hw/microblaze/xlnx-zynqmp-pmu.c | 10 | ||||
| -rw-r--r-- | hw/sd/bcm2835_sdhost.c | 20 | ||||
| -rw-r--r-- | qemu-img.c | 16 | ||||
| -rw-r--r-- | target/arm/helper.c | 46 | ||||
| -rw-r--r-- | tcg/i386/tcg-target.inc.c | 2 | ||||
| -rwxr-xr-x | tests/qemu-iotests/149 | 2 | ||||
| -rw-r--r-- | tests/qemu-iotests/149.out | 344 | ||||
| -rwxr-xr-x | tests/qemu-iotests/223 | 2 | ||||
| -rwxr-xr-x | tests/qemu-iotests/226 | 7 |
17 files changed, 280 insertions, 206 deletions
@@ -3002,7 +3002,7 @@ BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue, * * Reopens all BDS specified in the queue, with the appropriate * flags. All devices are prepared for reopen, and failure of any - * device will cause all device changes to be abandonded, and intermediate + * device will cause all device changes to be abandoned, and intermediate * data cleaned up. * * If all devices prepare successfully, then the changes are committed diff --git a/block/backup.c b/block/backup.c index 319fc922e8..8630d32926 100644 --- a/block/backup.c +++ b/block/backup.c @@ -91,7 +91,7 @@ static void cow_request_end(CowRequest *req) } /* Copy range to target with a bounce buffer and return the bytes copied. If - * error occured, return a negative error number */ + * error occurred, return a negative error number */ static int coroutine_fn backup_cow_with_bounce_buffer(BackupBlockJob *job, int64_t start, int64_t end, @@ -148,7 +148,7 @@ fail: } -/* Copy range to target and return the bytes copied. If error occured, return a +/* Copy range to target and return the bytes copied. If error occurred, return a * negative error number. */ static int coroutine_fn backup_cow_with_offload(BackupBlockJob *job, int64_t start, diff --git a/block/curl.c b/block/curl.c index aa42535783..229bb84a27 100644 --- a/block/curl.c +++ b/block/curl.c @@ -804,7 +804,7 @@ static int curl_open(BlockDriverState *bs, QDict *options, int flags, } /* Prior CURL 7.19.4 return value of 0 could mean that the file size is not * know or the size is zero. From 7.19.4 CURL returns -1 if size is not - * known and zero if it is realy zero-length file. */ + * known and zero if it is really zero-length file. */ #if LIBCURL_VERSION_NUM >= 0x071304 if (d < 0) { pstrcpy(state->errmsg, CURL_ERROR_SIZE, diff --git a/block/gluster.c b/block/gluster.c index a4e1c8ecd8..4fd55a9cc5 100644 --- a/block/gluster.c +++ b/block/gluster.c @@ -1326,7 +1326,7 @@ static int qemu_gluster_has_zero_init(BlockDriverState *bs) * If @start is in a trailing hole or beyond EOF, return -ENXIO. * If we can't find out, return a negative errno other than -ENXIO. * - * (Shamefully copied from file-posix.c, only miniscule adaptions.) + * (Shamefully copied from file-posix.c, only minuscule adaptions.) */ static int find_allocation(BlockDriverState *bs, off_t start, off_t *data, off_t *hole) diff --git a/block/vhdx.c b/block/vhdx.c index 4d0819750f..0795ca1985 100644 --- a/block/vhdx.c +++ b/block/vhdx.c @@ -185,7 +185,7 @@ uint32_t vhdx_checksum_calc(uint32_t crc, uint8_t *buf, size_t size, /* Validates the checksum of the buffer, with an in-place CRC. * * Zero is substituted during crc calculation for the original crc field, - * and the crc field is restored afterwards. But the buffer will be modifed + * and the crc field is restored afterwards. But the buffer will be modified * during the calculation, so this may not be not suitable for multi-threaded * use. * diff --git a/block/vvfat.c b/block/vvfat.c index c7d2ed2d96..fc41841a5c 100644 --- a/block/vvfat.c +++ b/block/vvfat.c @@ -1245,8 +1245,8 @@ static int vvfat_open(BlockDriverState *bs, QDict *options, int flags, s->fat2 = NULL; s->downcase_short_names = 1; - fprintf(stderr, "vvfat %s chs %d,%d,%d\n", - dirname, cyls, heads, secs); + DLOG(fprintf(stderr, "vvfat %s chs %d,%d,%d\n", + dirname, cyls, heads, secs)); s->sector_count = cyls * heads * secs - s->offset_to_bootsector; diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index 3cc27a1e44..c4bc3deedf 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -169,16 +169,22 @@ static void sl_nand_init(Object *obj) { SLNANDState *s = SL_NAND(obj); SysBusDevice *dev = SYS_BUS_DEVICE(obj); - DriveInfo *nand; s->ctl = 0; + + memory_region_init_io(&s->iomem, obj, &sl_ops, s, "sl", 0x40); + sysbus_init_mmio(dev, &s->iomem); +} + +static void sl_nand_realize(DeviceState *dev, Error **errp) +{ + SLNANDState *s = SL_NAND(dev); + DriveInfo *nand; + /* FIXME use a qdev drive property instead of drive_get() */ nand = drive_get(IF_MTD, 0, 0); s->nand = nand_init(nand ? blk_by_legacy_dinfo(nand) : NULL, s->manf_id, s->chip_id); - - memory_region_init_io(&s->iomem, obj, &sl_ops, s, "sl", 0x40); - sysbus_init_mmio(dev, &s->iomem); } /* Spitz Keyboard */ @@ -1079,6 +1085,7 @@ static void sl_nand_class_init(ObjectClass *klass, void *data) dc->vmsd = &vmstate_sl_nand_info; dc->props = sl_nand_properties; + dc->realize = sl_nand_realize; /* Reason: init() method uses drive_get() */ dc->user_creatable = false; } diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index b6b00a4f58..69f9c18d73 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -281,9 +281,9 @@ static void exynos4210_gic_set_irq(void *opaque, int irq, int level) qemu_set_irq(qdev_get_gpio_in(s->gic, irq), level); } -static void exynos4210_gic_init(Object *obj) +static void exynos4210_gic_realize(DeviceState *dev, Error **errp) { - DeviceState *dev = DEVICE(obj); + Object *obj = OBJECT(dev); Exynos4210GicState *s = EXYNOS4210_GIC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); const char cpu_prefix[] = "exynos4210-gic-alias_cpu"; @@ -347,13 +347,13 @@ static void exynos4210_gic_class_init(ObjectClass *klass, void *data) DeviceClass *dc = DEVICE_CLASS(klass); dc->props = exynos4210_gic_properties; + dc->realize = exynos4210_gic_realize; } static const TypeInfo exynos4210_gic_info = { .name = TYPE_EXYNOS4210_GIC, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210GicState), - .instance_init = exynos4210_gic_init, .class_init = exynos4210_gic_class_init, }; diff --git a/hw/microblaze/xlnx-zynqmp-pmu.c b/hw/microblaze/xlnx-zynqmp-pmu.c index 999a5657cf..57dc1ccd42 100644 --- a/hw/microblaze/xlnx-zynqmp-pmu.c +++ b/hw/microblaze/xlnx-zynqmp-pmu.c @@ -62,13 +62,11 @@ static void xlnx_zynqmp_pmu_soc_init(Object *obj) { XlnxZynqMPPMUSoCState *s = XLNX_ZYNQMP_PMU_SOC(obj); - object_initialize(&s->cpu, sizeof(s->cpu), - TYPE_MICROBLAZE_CPU); - object_property_add_child(obj, "pmu-cpu", OBJECT(&s->cpu), - &error_abort); + object_initialize_child(obj, "pmu-cpu", &s->cpu, sizeof(s->cpu), + TYPE_MICROBLAZE_CPU, &error_abort, NULL); - object_initialize(&s->intc, sizeof(s->intc), TYPE_XLNX_PMU_IO_INTC); - qdev_set_parent_bus(DEVICE(&s->intc), sysbus_get_default()); + sysbus_init_child_obj(obj, "intc", &s->intc, sizeof(s->intc), + TYPE_XLNX_PMU_IO_INTC); } static void xlnx_zynqmp_pmu_soc_realize(DeviceState *dev, Error **errp) diff --git a/hw/sd/bcm2835_sdhost.c b/hw/sd/bcm2835_sdhost.c index 4df4de7d67..1b760b2a7c 100644 --- a/hw/sd/bcm2835_sdhost.c +++ b/hw/sd/bcm2835_sdhost.c @@ -179,9 +179,11 @@ static void bcm2835_sdhost_fifo_run(BCM2835SDHostState *s) uint32_t value = 0; int n; int is_read; + int is_write; is_read = (s->cmd & SDCMD_READ_CMD) != 0; - if (s->datacnt != 0 && (!is_read || sdbus_data_ready(&s->sdbus))) { + is_write = (s->cmd & SDCMD_WRITE_CMD) != 0; + if (s->datacnt != 0 && (is_write || sdbus_data_ready(&s->sdbus))) { if (is_read) { n = 0; while (s->datacnt && s->fifo_len < BCM2835_SDHOST_FIFO_LEN) { @@ -201,8 +203,11 @@ static void bcm2835_sdhost_fifo_run(BCM2835SDHostState *s) if (n != 0) { bcm2835_sdhost_fifo_push(s, value); s->status |= SDHSTS_DATA_FLAG; + if (s->config & SDHCFG_DATA_IRPT_EN) { + s->status |= SDHSTS_SDIO_IRPT; + } } - } else { /* write */ + } else if (is_write) { /* write */ n = 0; while (s->datacnt > 0 && (s->fifo_len > 0 || n > 0)) { if (n == 0) { @@ -223,11 +228,18 @@ static void bcm2835_sdhost_fifo_run(BCM2835SDHostState *s) s->edm &= ~SDEDM_FSM_MASK; s->edm |= SDEDM_FSM_DATAMODE; trace_bcm2835_sdhost_edm_change("datacnt 0", s->edm); - - if ((s->cmd & SDCMD_WRITE_CMD) && + } + if (is_write) { + /* set block interrupt at end of each block transfer */ + if (s->hbct && s->datacnt % s->hbct == 0 && (s->config & SDHCFG_BLOCK_IRPT_EN)) { s->status |= SDHSTS_BLOCK_IRPT; } + /* set data interrupt after each transfer */ + s->status |= SDHSTS_DATA_FLAG; + if (s->config & SDHCFG_DATA_IRPT_EN) { + s->status |= SDHSTS_SDIO_IRPT; + } } } diff --git a/qemu-img.c b/qemu-img.c index 4a7ce43dc9..9b7506b8ae 100644 --- a/qemu-img.c +++ b/qemu-img.c @@ -2005,6 +2005,8 @@ static int convert_do_copy(ImgConvertState *s) return s->ret; } +#define MAX_BUF_SECTORS 32768 + static int img_convert(int argc, char **argv) { int c, bs_i, flags, src_flags = 0; @@ -2100,8 +2102,12 @@ static int img_convert(int argc, char **argv) int64_t sval; sval = cvtnum(optarg); - if (sval < 0) { - error_report("Invalid minimum zero buffer size for sparse output specified"); + if (sval < 0 || sval & (BDRV_SECTOR_SIZE - 1) || + sval / BDRV_SECTOR_SIZE > MAX_BUF_SECTORS) { + error_report("Invalid buffer size for sparse output specified. " + "Valid sizes are multiples of %llu up to %llu. Select " + "0 to disable sparse detection (fully allocates output).", + BDRV_SECTOR_SIZE, MAX_BUF_SECTORS * BDRV_SECTOR_SIZE); goto fail_getopt; } @@ -2385,9 +2391,9 @@ static int img_convert(int argc, char **argv) } /* increase bufsectors from the default 4096 (2M) if opt_transfer - * or discard_alignment of the out_bs is greater. Limit to 32768 (16MB) - * as maximum. */ - s.buf_sectors = MIN(32768, + * or discard_alignment of the out_bs is greater. Limit to + * MAX_BUF_SECTORS as maximum which is currently 32768 (16MB). */ + s.buf_sectors = MIN(MAX_BUF_SECTORS, MAX(s.buf_sectors, MAX(out_bs->bl.opt_transfer >> BDRV_SECTOR_BITS, out_bs->bl.pdiscard_alignment >> diff --git a/target/arm/helper.c b/target/arm/helper.c index 0604a0efbe..22d812240a 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -17,6 +17,7 @@ #include "exec/semihost.h" #include "sysemu/kvm.h" #include "fpu/softfloat.h" +#include "qemu/range.h" #define ARM_CPU_FREQ 1000000000 /* FIXME: 1 GHz, should be configurable */ @@ -9669,6 +9670,20 @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, } if (address < base || address > base + rmask) { + /* + * Address not in this region. We must check whether the + * region covers addresses in the same page as our address. + * In that case we must not report a size that covers the + * whole page for a subsequent hit against a different MPU + * region or the background region, because it would result in + * incorrect TLB hits for subsequent accesses to addresses that + * are in this MPU region. + */ + if (ranges_overlap(base, rmask, + address & TARGET_PAGE_MASK, + TARGET_PAGE_SIZE)) { + *page_size = 1; + } continue; } @@ -9888,6 +9903,22 @@ static void v8m_security_lookup(CPUARMState *env, uint32_t address, sattrs->srvalid = true; sattrs->sregion = r; } + } else { + /* + * Address not in this region. We must check whether the + * region covers addresses in the same page as our address. + * In that case we must not report a size that covers the + * whole page for a subsequent hit against a different MPU + * region or the background region, because it would result + * in incorrect TLB hits for subsequent accesses to + * addresses that are in this MPU region. + */ + if (limit >= base && + ranges_overlap(base, limit - base + 1, + addr_page_base, + TARGET_PAGE_SIZE)) { + sattrs->subpage = true; + } } } } @@ -9963,6 +9994,21 @@ static bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, } if (address < base || address > limit) { + /* + * Address not in this region. We must check whether the + * region covers addresses in the same page as our address. + * In that case we must not report a size that covers the + * whole page for a subsequent hit against a different MPU + * region or the background region, because it would result in + * incorrect TLB hits for subsequent accesses to addresses that + * are in this MPU region. + */ + if (limit >= base && + ranges_overlap(base, limit - base + 1, + addr_page_base, + TARGET_PAGE_SIZE)) { + *is_subpage = true; + } continue; } diff --git a/tcg/i386/tcg-target.inc.c b/tcg/i386/tcg-target.inc.c index e87b0d445e..a91e4f1313 100644 --- a/tcg/i386/tcg-target.inc.c +++ b/tcg/i386/tcg-target.inc.c @@ -3532,7 +3532,7 @@ static void tcg_target_init(TCGContext *s) tcg_target_available_regs[TCG_TYPE_V256] = ALL_VECTOR_REGS; } - tcg_target_call_clobber_regs = 0; + tcg_target_call_clobber_regs = ALL_VECTOR_REGS; tcg_regset_set_reg(tcg_target_call_clobber_regs, TCG_REG_EAX); tcg_regset_set_reg(tcg_target_call_clobber_regs, TCG_REG_EDX); tcg_regset_set_reg(tcg_target_call_clobber_regs, TCG_REG_ECX); diff --git a/tests/qemu-iotests/149 b/tests/qemu-iotests/149 index d3ffa259db..9e0cad76f9 100755 --- a/tests/qemu-iotests/149 +++ b/tests/qemu-iotests/149 @@ -259,7 +259,7 @@ def qemu_io_image_args(config, dev=False): if dev: return [ "--image-opts", - "driver=file,filename=%s" % config.device_path()] + "driver=host_device,filename=%s" % config.device_path()] else: return [ "--object", diff --git a/tests/qemu-iotests/149.out b/tests/qemu-iotests/149.out index 5dea00bfa8..1407ce6dad 100644 --- a/tests/qemu-iotests/149.out +++ b/tests/qemu-iotests/149.out @@ -7,13 +7,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -43,13 +43,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -67,13 +67,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha1.img', fmt=luks size=439804651 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -103,13 +103,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -127,13 +127,13 @@ sudo cryptsetup -q -v luksFormat --cipher twofish-xts-plain64 --key-size 512 --h sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -163,13 +163,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -187,13 +187,13 @@ Formatting 'TEST_DIR/luks-twofish-256-xts-plain64-sha1.img', fmt=luks size=43980 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -223,13 +223,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -247,13 +247,13 @@ sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 512 --h sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -283,13 +283,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -307,13 +307,13 @@ Formatting 'TEST_DIR/luks-serpent-256-xts-plain64-sha1.img', fmt=luks size=43980 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -343,13 +343,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -367,13 +367,13 @@ sudo cryptsetup -q -v luksFormat --cipher cast5-cbc-plain64 --key-size 128 --has sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -403,13 +403,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -427,13 +427,13 @@ Formatting 'TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img', fmt=luks size=4398046 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -463,13 +463,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -488,13 +488,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain --key-size 256 --hash sh sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -524,13 +524,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -548,13 +548,13 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-plain-sha1.img', fmt=luks size=43980465111 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -584,13 +584,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -608,13 +608,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain64 --key-size 256 --hash sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -644,13 +644,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -668,13 +668,13 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-plain64-sha1.img', fmt=luks size=439804651 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -704,13 +704,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -728,13 +728,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-cbc-essiv:sha256 --key-size 256 -- sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -764,13 +764,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -788,13 +788,13 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img', fmt=luks size=4398 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -824,13 +824,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -848,13 +848,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-essiv:sha256 --key-size 512 -- sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -884,13 +884,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -908,13 +908,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img', fmt=luks size=4398 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -944,13 +944,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -968,13 +968,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 256 --hash sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1004,13 +1004,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1028,13 +1028,13 @@ Formatting 'TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img', fmt=luks size=43 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1064,13 +1064,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1088,13 +1088,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 384 --hash sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1124,13 +1124,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1148,13 +1148,13 @@ Formatting 'TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img', fmt=luks size=43 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1184,13 +1184,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1208,13 +1208,13 @@ sudo cryptsetup -q -v luksFormat --cipher twofish-xts-plain64 --key-size 256 --h sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1244,13 +1244,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1268,13 +1268,13 @@ Formatting 'TEST_DIR/luks-twofish-128-xts-plain64-sha1.img', fmt=luks size=43980 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1304,13 +1304,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1329,13 +1329,13 @@ sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 256 --h sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1365,13 +1365,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1389,13 +1389,13 @@ Formatting 'TEST_DIR/luks-serpent-128-xts-plain64-sha1.img', fmt=luks size=43980 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1425,13 +1425,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1449,13 +1449,13 @@ sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 384 --h sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1485,13 +1485,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1509,13 +1509,13 @@ Formatting 'TEST_DIR/luks-serpent-192-xts-plain64-sha1.img', fmt=luks size=43980 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1545,13 +1545,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1571,13 +1571,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha224.img qiotest-145-aes-256-xts-plain64-sha224 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1607,13 +1607,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha224.img qiotest-145-aes-256-xts-plain64-sha224 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1631,13 +1631,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha224.img', fmt=luks size=4398046 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha224.img qiotest-145-aes-256-xts-plain64-sha224 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1667,13 +1667,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha224.img qiotest-145-aes-256-xts-plain64-sha224 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1691,13 +1691,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1727,13 +1727,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1751,13 +1751,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha256.img', fmt=luks size=4398046 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1787,13 +1787,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1811,13 +1811,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha384.img qiotest-145-aes-256-xts-plain64-sha384 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1847,13 +1847,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha384.img qiotest-145-aes-256-xts-plain64-sha384 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1871,13 +1871,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha384.img', fmt=luks size=4398046 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha384.img qiotest-145-aes-256-xts-plain64-sha384 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1907,13 +1907,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha384.img qiotest-145-aes-256-xts-plain64-sha384 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1931,13 +1931,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha512.img qiotest-145-aes-256-xts-plain64-sha512 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1967,13 +1967,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha512.img qiotest-145-aes-256-xts-plain64-sha512 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -1991,13 +1991,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha512.img', fmt=luks size=4398046 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha512.img qiotest-145-aes-256-xts-plain64-sha512 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2027,13 +2027,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha512.img qiotest-145-aes-256-xts-plain64-sha512 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2051,13 +2051,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img qiotest-145-aes-256-xts-plain64-ripemd160 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2087,13 +2087,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img qiotest-145-aes-256-xts-plain64-ripemd160 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2111,13 +2111,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img', fmt=luks size=4398 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img qiotest-145-aes-256-xts-plain64-ripemd160 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2147,13 +2147,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img qiotest-145-aes-256-xts-plain64-ripemd160 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2171,13 +2171,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain --key-size 512 --hash sh sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img qiotest-145-aes-256-xts-plain-sha1-pwslot3 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2207,13 +2207,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img qiotest-145-aes-256-xts-plain-sha1-pwslot3 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2245,13 +2245,13 @@ sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2281,13 +2281,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2305,13 +2305,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img', fmt=luks size= sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2341,13 +2341,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2365,13 +2365,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-cbc-essiv:sha256 --key-size 256 -- sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img qiotest-145-aes-256-cbc-essiv-auto-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2401,13 +2401,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img qiotest-145-aes-256-cbc-essiv-auto-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2425,13 +2425,13 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img', fmt=luks size=439804 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img qiotest-145-aes-256-cbc-essiv-auto-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2461,13 +2461,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img qiotest-145-aes-256-cbc-essiv-auto-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2485,13 +2485,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain64:sha256 --key-size 256 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img qiotest-145-aes-256-cbc-plain64-sha256-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2521,13 +2521,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img qiotest-145-aes-256-cbc-plain64-sha256-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2545,13 +2545,13 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img', fmt=luks size=43 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img qiotest-145-aes-256-cbc-plain64-sha256-sha1 # Write test pattern 0xa7 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 -qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 +qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 wrote 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Write test pattern 0x13 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 -qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 +qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 wrote 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) @@ -2581,13 +2581,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328 sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img qiotest-145-aes-256-cbc-plain64-sha256-sha1 # Read test pattern 0x91 sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 -qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 +qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 read 10485760/10485760 bytes at offset 104857600 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) # Read test pattern 0x5e sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 -qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 +qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1 read 10485760/10485760 bytes at offset 3298534883328 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) diff --git a/tests/qemu-iotests/223 b/tests/qemu-iotests/223 index b63b7a4f9e..8b1859c2dd 100755 --- a/tests/qemu-iotests/223 +++ b/tests/qemu-iotests/223 @@ -40,6 +40,8 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 _supported_fmt qcow2 _supported_proto file # uses NBD as well _supported_os Linux +# Persistent dirty bitmaps require compat=1.1 +_unsupported_imgopts 'compat=0.10' function do_run_qemu() { diff --git a/tests/qemu-iotests/226 b/tests/qemu-iotests/226 index 460aea2fc9..211ea9888a 100755 --- a/tests/qemu-iotests/226 +++ b/tests/qemu-iotests/226 @@ -41,6 +41,9 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 # Generic format, but tests file-protocol specific error handling _supported_fmt generic +if [ "$IMGOPTSSYNTAX" = "true" ]; then + _unsupported_fmt $IMGFMT +fi _supported_proto file _supported_os Linux @@ -52,10 +55,10 @@ for PROTO in "file" "host_device" "host_cdrom"; do echo "=== Testing with driver:$PROTO ===" echo echo "== Testing RO ==" - $QEMU_IO -c "open -r -o driver=$PROTO,filename=$TEST_IMG" 2>&1 | _filter_imgfmt | _filter_testdir + $QEMU_IO -c "open -r -o driver=$PROTO,filename=$TEST_IMG" 2>&1 | _filter_testdir | _filter_imgfmt $QEMU_IO -c "open -r -o driver=$PROTO,filename=/dev/null" 2>&1 | _filter_imgfmt echo "== Testing RW ==" - $QEMU_IO -c "open -o driver=$PROTO,filename=$TEST_IMG" 2>&1 | _filter_imgfmt | _filter_testdir + $QEMU_IO -c "open -o driver=$PROTO,filename=$TEST_IMG" 2>&1 | _filter_testdir | _filter_imgfmt $QEMU_IO -c "open -o driver=$PROTO,filename=/dev/null" 2>&1 | _filter_imgfmt done |