diff options
-rw-r--r-- | hw/arm/aspeed.c | 58 | ||||
-rw-r--r-- | hw/arm/musicpal.c | 4 | ||||
-rw-r--r-- | hw/arm/nseries.c | 8 | ||||
-rw-r--r-- | hw/arm/pxa2xx.c | 5 | ||||
-rw-r--r-- | hw/arm/realview.c | 2 | ||||
-rw-r--r-- | hw/arm/spitz.c | 4 | ||||
-rw-r--r-- | hw/arm/stellaris.c | 2 | ||||
-rw-r--r-- | hw/arm/tosa.c | 2 | ||||
-rw-r--r-- | hw/arm/versatilepb.c | 2 | ||||
-rw-r--r-- | hw/arm/vexpress.c | 2 | ||||
-rw-r--r-- | hw/arm/z2.c | 4 | ||||
-rw-r--r-- | hw/display/sii9022.c | 2 | ||||
-rw-r--r-- | hw/i2c/core.c | 6 | ||||
-rw-r--r-- | hw/ppc/e500.c | 2 | ||||
-rw-r--r-- | hw/ppc/sam460ex.c | 2 | ||||
-rw-r--r-- | include/hw/i2c/i2c.h | 2 |
16 files changed, 54 insertions, 53 deletions
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index 78432e267b..c4288b5fb1 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -385,14 +385,14 @@ static void palmetto_bmc_i2c_init(AspeedMachineState *bmc) /* The palmetto platform expects a ds3231 RTC but a ds1338 is * enough to provide basic RTC features. Alarms will be missing */ - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 0), "ds1338", 0x68); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 0), "ds1338", 0x68); smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 0), 0x50, eeprom_buf); /* add a TMP423 temperature sensor */ - dev = i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 2), - "tmp423", 0x4c); + dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), + "tmp423", 0x4c)); object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); @@ -408,12 +408,12 @@ static void ast2500_evb_i2c_init(AspeedMachineState *bmc) eeprom_buf); /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 7), + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), TYPE_TMP105, 0x4d); /* The AST2500 EVB does not have an RTC. Let's pretend that one is * plugged on the I2C bus header */ - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32); } static void ast2600_evb_i2c_init(AspeedMachineState *bmc) @@ -428,36 +428,36 @@ static void romulus_bmc_i2c_init(AspeedMachineState *bmc) /* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32); } static void swift_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 3), "pca9552", 0x60); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "pca9552", 0x60); /* The swift board expects a TMP275 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 7), "tmp105", 0x48); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "tmp105", 0x48); /* The swift board expects a pca9551 but a pca9552 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x60); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x60); /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "ds1338", 0x32); - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "ds1338", 0x32); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60); - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4c); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4c); /* The swift board expects a pca9539 but a pca9552 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 9), "pca9552", 0x74); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "pca9552", 0x74); - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4c); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4c); /* The swift board expects a pca9539 but a pca9552 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 10), "pca9552", + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "pca9552", 0x74); /* The swift board expects a TMP275 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x48); - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x4a); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x48); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x4a); } static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc) @@ -465,8 +465,8 @@ static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc) AspeedSoCState *soc = &bmc->soc; /* bus 2 : */ - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x48); - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x49); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x48); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x49); /* bus 2 : pca9546 @ 0x73 */ /* bus 3 : pca9548 @ 0x70 */ @@ -476,21 +476,21 @@ static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc) smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x54, eeprom4_54); /* PCA9539 @ 0x76, but PCA9552 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x76); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x76); /* PCA9539 @ 0x77, but PCA9552 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x77); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x77); /* bus 6 : */ - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x48); - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x49); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x48); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x49); /* bus 6 : pca9546 @ 0x73 */ /* bus 8 : */ uint8_t *eeprom8_56 = g_malloc0(8 * 1024); smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 8), 0x56, eeprom8_56); - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60); - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x61); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x61); /* bus 8 : adc128d818 @ 0x1d */ /* bus 8 : adc128d818 @ 0x1f */ @@ -519,16 +519,16 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc) aspeed_i2c_get_bus(&soc->i2c, 3), &error_fatal); - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c); - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c); /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 9), TYPE_TMP105, + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), TYPE_TMP105, 0x4a); /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32); + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32); smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 11), 0x51, eeprom_buf); diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index ff9a7c8cc6..c3b9780f35 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -1584,7 +1584,7 @@ static void musicpal_init(MachineState *machine) DeviceState *i2c_dev; DeviceState *lcd_dev; DeviceState *key_dev; - DeviceState *wm8750_dev; + I2CSlave *wm8750_dev; SysBusDevice *s; I2CBus *i2c; int i; @@ -1687,7 +1687,7 @@ static void musicpal_init(MachineState *machine) qdev_connect_gpio_out(key_dev, i, qdev_get_gpio_in(dev, i + 15)); } - wm8750_dev = i2c_create_slave(i2c, TYPE_WM8750, MP_WM_ADDR); + wm8750_dev = i2c_slave_create_simple(i2c, TYPE_WM8750, MP_WM_ADDR); dev = qdev_new(TYPE_MV88W8618_AUDIO); s = SYS_BUS_DEVICE(dev); object_property_set_link(OBJECT(dev), "wm8750", OBJECT(wm8750_dev), diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index 428a2a2c5a..e48092ca04 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -215,7 +215,7 @@ static void n8x0_i2c_setup(struct n800_s *s) I2CBus *i2c = omap_i2c_bus(s->mpu->i2c[0]); /* Attach a menelaus PM chip */ - dev = i2c_create_slave(i2c, "twl92230", N8X0_MENELAUS_ADDR); + dev = DEVICE(i2c_slave_create_simple(i2c, "twl92230", N8X0_MENELAUS_ADDR)); qdev_connect_gpio_out(dev, 3, qdev_get_gpio_in(s->mpu->ih[0], OMAP_INT_24XX_SYS_NIRQ)); @@ -224,7 +224,7 @@ static void n8x0_i2c_setup(struct n800_s *s) qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier); /* Attach a TMP105 PM chip (A0 wired to ground) */ - dev = i2c_create_slave(i2c, TYPE_TMP105, N8X0_TMP105_ADDR); + dev = DEVICE(i2c_slave_create_simple(i2c, TYPE_TMP105, N8X0_TMP105_ADDR)); qdev_connect_gpio_out(dev, 0, tmp_irq); } @@ -416,8 +416,8 @@ static void n810_kbd_setup(struct n800_s *s) /* Attach the LM8322 keyboard to the I2C bus, * should happen in n8x0_i2c_setup and s->kbd be initialised here. */ - s->kbd = i2c_create_slave(omap_i2c_bus(s->mpu->i2c[0]), - "lm8323", N810_LM8323_ADDR); + s->kbd = DEVICE(i2c_slave_create_simple(omap_i2c_bus(s->mpu->i2c[0]), + "lm8323", N810_LM8323_ADDR)); qdev_connect_gpio_out(s->kbd, 0, kbd_irq); } diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index f104a33463..6203c4cfe0 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -1522,8 +1522,9 @@ PXA2xxI2CState *pxa2xx_i2c_init(hwaddr base, s = PXA2XX_I2C(i2c_dev); /* FIXME: Should the slave device really be on a separate bus? */ i2cbus = i2c_init_bus(dev, "dummy"); - dev = i2c_create_slave(i2cbus, TYPE_PXA2XX_I2C_SLAVE, 0); - s->slave = PXA2XX_I2C_SLAVE(dev); + s->slave = PXA2XX_I2C_SLAVE(i2c_slave_create_simple(i2cbus, + TYPE_PXA2XX_I2C_SLAVE, + 0)); s->slave->host = s; return s; diff --git a/hw/arm/realview.c b/hw/arm/realview.c index 22e132058e..c1ff172b13 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -285,7 +285,7 @@ static void realview_init(MachineState *machine, dev = sysbus_create_simple(TYPE_VERSATILE_I2C, 0x10002000, NULL); i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); - i2c_create_slave(i2c, "ds1338", 0x68); + i2c_slave_create_simple(i2c, "ds1338", 0x68); /* Memory map for RealView Emulation Baseboard: */ /* 0x10000000 System registers. */ diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index f020aff974..7ac8254aa6 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -787,7 +787,7 @@ static void spitz_i2c_setup(PXA2xxState *cpu) DeviceState *wm; /* Attach a WM8750 to the bus */ - wm = i2c_create_slave(bus, TYPE_WM8750, 0); + wm = DEVICE(i2c_slave_create_simple(bus, TYPE_WM8750, 0)); spitz_wm8750_addr(wm, 0, 0); qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_WM, @@ -802,7 +802,7 @@ static void spitz_i2c_setup(PXA2xxState *cpu) static void spitz_akita_i2c_setup(PXA2xxState *cpu) { /* Attach a Max7310 to Akita I2C bus. */ - i2c_create_slave(pxa2xx_i2c_bus(cpu->i2c[0]), "max7310", + i2c_slave_create_simple(pxa2xx_i2c_bus(cpu->i2c[0]), "max7310", AKITA_MAX_ADDR); } diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index 7156fb3ece..28eb15c76c 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -1380,7 +1380,7 @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) qdev_get_gpio_in(nvic, 8)); i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); if (board->peripherals & BP_OLED_I2C) { - i2c_create_slave(i2c, "ssd0303", 0x3d); + i2c_slave_create_simple(i2c, "ssd0303", 0x3d); } } diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index 5dee2d76c6..8c1ee0cdd1 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -206,7 +206,7 @@ static uint8_t tosa_dac_recv(I2CSlave *s) static void tosa_tg_init(PXA2xxState *cpu) { I2CBus *bus = pxa2xx_i2c_bus(cpu->i2c[0]); - i2c_create_slave(bus, TYPE_TOSA_DAC, DAC_BASE); + i2c_slave_create_simple(bus, TYPE_TOSA_DAC, DAC_BASE); ssi_create_slave(cpu->ssp[1], "tosa-ssp"); } diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index d09ea24ae2..9dc93182b6 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -317,7 +317,7 @@ static void versatile_init(MachineState *machine, int board_id) dev = sysbus_create_simple(TYPE_VERSATILE_I2C, 0x10002000, NULL); i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); - i2c_create_slave(i2c, "ds1338", 0x68); + i2c_slave_create_simple(i2c, "ds1338", 0x68); /* Add PL041 AACI Interface to the LM4549 codec */ pl041 = qdev_new("pl041"); diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index 762b068e90..1dc971c34f 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -642,7 +642,7 @@ static void vexpress_common_init(MachineState *machine) dev = sysbus_create_simple(TYPE_VERSATILE_I2C, map[VE_SERIALDVI], NULL); i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); - i2c_create_slave(i2c, "sii9022", 0x39); + i2c_slave_create_simple(i2c, "sii9022", 0x39); sysbus_create_simple("pl031", map[VE_RTC], pic[4]); /* RTC */ diff --git a/hw/arm/z2.c b/hw/arm/z2.c index e1f22f5868..9a9bbc653b 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -330,8 +330,8 @@ static void z2_init(MachineState *machine) type_register_static(&aer915_info); z2_lcd = ssi_create_slave(mpu->ssp[1], TYPE_ZIPIT_LCD); bus = pxa2xx_i2c_bus(mpu->i2c[0]); - i2c_create_slave(bus, TYPE_AER915, 0x55); - wm = i2c_create_slave(bus, TYPE_WM8750, 0x1b); + i2c_slave_create_simple(bus, TYPE_AER915, 0x55); + wm = DEVICE(i2c_slave_create_simple(bus, TYPE_WM8750, 0x1b)); mpu->i2s->opaque = wm; mpu->i2s->codec_out = wm8750_dac_dat; mpu->i2s->codec_in = wm8750_adc_dat; diff --git a/hw/display/sii9022.c b/hw/display/sii9022.c index 0710ce9de5..3b82a8567f 100644 --- a/hw/display/sii9022.c +++ b/hw/display/sii9022.c @@ -161,7 +161,7 @@ static void sii9022_realize(DeviceState *dev, Error **errp) I2CBus *bus; bus = I2C_BUS(qdev_get_parent_bus(dev)); - i2c_create_slave(bus, TYPE_I2CDDC, 0x50); + i2c_slave_create_simple(bus, TYPE_I2CDDC, 0x50); } static void sii9022_class_init(ObjectClass *klass, void *data) diff --git a/hw/i2c/core.c b/hw/i2c/core.c index f81601a5b9..21ec52ac5a 100644 --- a/hw/i2c/core.c +++ b/hw/i2c/core.c @@ -281,13 +281,13 @@ bool i2c_slave_realize_and_unref(I2CSlave *dev, I2CBus *bus, Error **errp) return qdev_realize_and_unref(&dev->qdev, &bus->qbus, errp); } -DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr) +I2CSlave *i2c_slave_create_simple(I2CBus *bus, const char *name, uint8_t addr) { I2CSlave *dev = i2c_slave_new(name, addr); - i2c_slave_realize_and_unref(dev, bus, &error_fatal); + i2c_slave_realize_and_unref(dev, bus, &error_abort); - return DEVICE(dev); + return dev; } static void i2c_slave_class_init(ObjectClass *klass, void *data) diff --git a/hw/ppc/e500.c b/hw/ppc/e500.c index 5448d101d9..ab9884e315 100644 --- a/hw/ppc/e500.c +++ b/hw/ppc/e500.c @@ -941,7 +941,7 @@ void ppce500_init(MachineState *machine) memory_region_add_subregion(ccsr_addr_space, MPC8544_I2C_REGS_OFFSET, sysbus_mmio_get_region(s, 0)); i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); - i2c_create_slave(i2c, "ds1338", RTC_REGS_OFFSET); + i2c_slave_create_simple(i2c, "ds1338", RTC_REGS_OFFSET); /* General Utility device */ diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c index 1a106a68de..1702344c46 100644 --- a/hw/ppc/sam460ex.c +++ b/hw/ppc/sam460ex.c @@ -339,7 +339,7 @@ static void sam460ex_init(MachineState *machine) spd_data[20] = 4; /* SO-DIMM module */ smbus_eeprom_init_one(i2c, 0x50, spd_data); /* RTC */ - i2c_create_slave(i2c, "m41t80", 0x68); + i2c_slave_create_simple(i2c, "m41t80", 0x68); dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600800, uic[0][3]); diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h index cb7211f027..c533058998 100644 --- a/include/hw/i2c/i2c.h +++ b/include/hw/i2c/i2c.h @@ -80,7 +80,7 @@ int i2c_send(I2CBus *bus, uint8_t data); uint8_t i2c_recv(I2CBus *bus); I2CSlave *i2c_slave_new(const char *name, uint8_t addr); -DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr); +I2CSlave *i2c_slave_create_simple(I2CBus *bus, const char *name, uint8_t addr); bool i2c_slave_realize_and_unref(I2CSlave *dev, I2CBus *bus, Error **errp); /* lm832x.c */ |