aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--tests/qemu-iotests/common.filter36
-rw-r--r--tests/qemu-iotests/common.rc13
2 files changed, 31 insertions, 18 deletions
diff --git a/tests/qemu-iotests/common.filter b/tests/qemu-iotests/common.filter
index c282bc24f0..35fddc746f 100644
--- a/tests/qemu-iotests/common.filter
+++ b/tests/qemu-iotests/common.filter
@@ -23,37 +23,37 @@
#
_filter_date()
{
- sed \
+ $SED \
-e 's/[A-Z][a-z][a-z] [A-z][a-z][a-z] *[0-9][0-9]* [0-9][0-9]:[0-9][0-9]:[0-9][0-9] [0-9][0-9][0-9][0-9]$/DATE/'
}
_filter_generated_node_ids()
{
- sed -re 's/\#block[0-9]{3,}/NODE_NAME/'
+ $SED -re 's/\#block[0-9]{3,}/NODE_NAME/'
}
_filter_qom_path()
{
- sed -e 's#\(Attached to: *\) /.*#\1 PATH#'
+ $SED -e 's#\(Attached to: *\) /.*#\1 PATH#'
}
# replace occurrences of the actual TEST_DIR value with TEST_DIR
_filter_testdir()
{
- sed -e "s#$TEST_DIR/#TEST_DIR/#g"
+ $SED -e "s#$TEST_DIR/#TEST_DIR/#g"
}
# replace occurrences of the actual IMGFMT value with IMGFMT
_filter_imgfmt()
{
- sed -e "s#$IMGFMT#IMGFMT#g"
+ $SED -e "s#$IMGFMT#IMGFMT#g"
}
# Replace error message when the format is not supported and delete
# the output lines after the first one
_filter_qemu_img_check()
{
- sed -e '/allocated.*fragmented.*compressed clusters/d' \
+ $SED -e '/allocated.*fragmented.*compressed clusters/d' \
-e 's/qemu-img: This image format does not support checks/No errors were found on the image./' \
-e '/Image end offset: [0-9]\+/d'
}
@@ -61,13 +61,13 @@ _filter_qemu_img_check()
# Removes \r from messages
_filter_win32()
{
- sed -e 's/\r//g'
+ $SED -e 's/\r//g'
}
# sanitize qemu-io output
_filter_qemu_io()
{
- _filter_win32 | sed -e "s/[0-9]* ops\; [0-9/:. sec]* ([0-9/.inf]* [EPTGMKiBbytes]*\/sec and [0-9/.inf]* ops\/sec)/X ops\; XX:XX:XX.X (XXX YYY\/sec and XXX ops\/sec)/" \
+ _filter_win32 | $SED -e "s/[0-9]* ops\; [0-9/:. sec]* ([0-9/.inf]* [EPTGMKiBbytes]*\/sec and [0-9/.inf]* ops\/sec)/X ops\; XX:XX:XX.X (XXX YYY\/sec and XXX ops\/sec)/" \
-e "s/: line [0-9][0-9]*: *[0-9][0-9]*\( Aborted\| Killed\)/:\1/" \
-e "s/qemu-io> //g"
}
@@ -75,7 +75,7 @@ _filter_qemu_io()
# replace occurrences of QEMU_PROG with "qemu"
_filter_qemu()
{
- sed -e "s#\\(^\\|(qemu) \\)$(basename $QEMU_PROG):#\1QEMU_PROG:#" \
+ $SED -e "s#\\(^\\|(qemu) \\)$(basename $QEMU_PROG):#\1QEMU_PROG:#" \
-e 's#^QEMU [0-9]\+\.[0-9]\+\.[0-9]\+ monitor#QEMU X.Y.Z monitor#' \
-e $'s#\r##' # QEMU monitor uses \r\n line endings
}
@@ -84,7 +84,7 @@ _filter_qemu()
_filter_qmp()
{
_filter_win32 | \
- sed -e 's#\("\(micro\)\?seconds": \)[0-9]\+#\1 TIMESTAMP#g' \
+ $SED -e 's#\("\(micro\)\?seconds": \)[0-9]\+#\1 TIMESTAMP#g' \
-e 's#^{"QMP":.*}$#QMP_VERSION#' \
-e '/^ "QMP": {\s*$/, /^ }\s*$/ c\' \
-e ' QMP_VERSION'
@@ -93,32 +93,32 @@ _filter_qmp()
# readline makes HMP command strings so long that git complains
_filter_hmp()
{
- sed -e $'s/^\\((qemu) \\)\\?.*\e\\[D/\\1/g' \
+ $SED -e $'s/^\\((qemu) \\)\\?.*\e\\[D/\\1/g' \
-e $'s/\e\\[K//g'
}
# replace block job offset
_filter_block_job_offset()
{
- sed -e 's/, "offset": [0-9]\+,/, "offset": OFFSET,/'
+ $SED -e 's/, "offset": [0-9]\+,/, "offset": OFFSET,/'
}
# replace block job len
_filter_block_job_len()
{
- sed -e 's/, "len": [0-9]\+,/, "len": LEN,/g'
+ $SED -e 's/, "len": [0-9]\+,/, "len": LEN,/g'
}
# replace actual image size (depends on the host filesystem)
_filter_actual_image_size()
{
- sed -s 's/\("actual-size":\s*\)[0-9]\+/\1SIZE/g'
+ $SED -s 's/\("actual-size":\s*\)[0-9]\+/\1SIZE/g'
}
# replace driver-specific options in the "Formatting..." line
_filter_img_create()
{
- sed -e "s#$REMOTE_TEST_DIR#TEST_DIR#g" \
+ $SED -e "s#$REMOTE_TEST_DIR#TEST_DIR#g" \
-e "s#$IMGPROTO:$TEST_DIR#TEST_DIR#g" \
-e "s#$TEST_DIR#TEST_DIR#g" \
-e "s#$IMGFMT#IMGFMT#g" \
@@ -154,7 +154,7 @@ _filter_img_info()
discard=0
regex_json_spec_start='^ *"format-specific": \{'
- sed -e "s#$REMOTE_TEST_DIR#TEST_DIR#g" \
+ $SED -e "s#$REMOTE_TEST_DIR#TEST_DIR#g" \
-e "s#$IMGPROTO:$TEST_DIR#TEST_DIR#g" \
-e "s#$TEST_DIR#TEST_DIR#g" \
-e "s#$IMGFMT#IMGFMT#g" \
@@ -201,7 +201,7 @@ _filter_img_info()
# human and json output
_filter_qemu_img_map()
{
- sed -e 's/\([0-9a-fx]* *[0-9a-fx]* *\)[0-9a-fx]* */\1/g' \
+ $SED -e 's/\([0-9a-fx]* *[0-9a-fx]* *\)[0-9a-fx]* */\1/g' \
-e 's/"offset": [0-9]\+/"offset": OFFSET/g' \
-e 's/Mapped to *//' | _filter_testdir | _filter_imgfmt
}
@@ -213,7 +213,7 @@ _filter_nbd()
# receive callbacks sometimes, making them unreliable.
#
# Filter out the TCP port number since this changes between runs.
- sed -e '/nbd\/.*\.c:/d' \
+ $SED -e '/nbd\/.*\.c:/d' \
-e 's#127\.0\.0\.1:[0-9]*#127.0.0.1:PORT#g' \
-e "s#?socket=$TEST_DIR#?socket=TEST_DIR#g" \
-e 's#\(foo\|PORT/\?\|.sock\): Failed to .*$#\1#'
diff --git a/tests/qemu-iotests/common.rc b/tests/qemu-iotests/common.rc
index f21020eba6..a543e546c2 100644
--- a/tests/qemu-iotests/common.rc
+++ b/tests/qemu-iotests/common.rc
@@ -17,6 +17,19 @@
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
+SED=
+for sed in sed gsed; do
+ ($sed --version | grep 'GNU sed') > /dev/null 2>&1
+ if [ "$?" -eq 0 ]; then
+ SED=$sed
+ break
+ fi
+done
+if [ -z "$SED" ]; then
+ echo "$0: GNU sed not found"
+ exit 1
+fi
+
dd()
{
if [ "$HOSTOS" == "Linux" ]