diff options
| -rw-r--r-- | Makefile.target | 2 | ||||
| -rw-r--r-- | hw/pc.c | 11 | ||||
| -rw-r--r-- | hw/ppc440_bamboo.c | 7 | ||||
| -rw-r--r-- | hw/qdev.c | 10 | ||||
| -rw-r--r-- | hw/s390-virtio-bus.c | 17 | ||||
| -rw-r--r-- | hw/s390-virtio-bus.h | 2 | ||||
| -rw-r--r-- | hw/s390-virtio.c | 8 | ||||
| -rw-r--r-- | hw/virtio-console.c | 143 | ||||
| -rw-r--r-- | hw/virtio-console.h | 19 | ||||
| -rw-r--r-- | hw/virtio-pci.c | 13 | ||||
| -rw-r--r-- | hw/virtio-serial-bus.c | 507 | ||||
| -rw-r--r-- | hw/virtio-serial.c | 111 | ||||
| -rw-r--r-- | hw/virtio-serial.h | 158 | ||||
| -rw-r--r-- | hw/virtio.h | 2 | ||||
| -rw-r--r-- | qemu-options.hx | 4 | ||||
| -rw-r--r-- | sysemu.h | 6 | ||||
| -rw-r--r-- | vl.c | 2 |
17 files changed, 809 insertions, 213 deletions
diff --git a/Makefile.target b/Makefile.target index e6614789c3..60df16dba5 100644 --- a/Makefile.target +++ b/Makefile.target @@ -172,7 +172,7 @@ ifdef CONFIG_SOFTMMU obj-y = vl.o async.o monitor.o pci.o pci_host.o pcie_host.o machine.o gdbstub.o # virtio has to be here due to weird dependency between PCI and virtio-net. # need to fix this properly -obj-y += virtio-blk.o virtio-balloon.o virtio-net.o virtio-console.o virtio-pci.o +obj-y += virtio-blk.o virtio-balloon.o virtio-net.o virtio-serial.o virtio-serial-bus.o virtio-pci.o obj-$(CONFIG_KVM) += kvm.o kvm-all.o obj-$(CONFIG_ISA_MMIO) += isa_mmio.o LIBS+=-lz @@ -1018,15 +1018,6 @@ static void pc_init1(ram_addr_t ram_size, pci_create_simple(pci_bus, -1, "lsi53c895a"); } } - - /* Add virtio console devices */ - if (pci_enabled) { - for(i = 0; i < MAX_VIRTIO_CONSOLES; i++) { - if (virtcon_hds[i]) { - pci_create_simple(pci_bus, -1, "virtio-console-pci"); - } - } - } } static void pc_init_pci(ram_addr_t ram_size, @@ -1110,7 +1101,7 @@ static QEMUMachine pc_machine_v0_10 = { .property = "class", .value = stringify(PCI_CLASS_STORAGE_OTHER), },{ - .driver = "virtio-console-pci", + .driver = "virtio-serial-pci", .property = "class", .value = stringify(PCI_CLASS_DISPLAY_OTHER), },{ diff --git a/hw/ppc440_bamboo.c b/hw/ppc440_bamboo.c index a4882406a9..1ab9872710 100644 --- a/hw/ppc440_bamboo.c +++ b/hw/ppc440_bamboo.c @@ -108,13 +108,6 @@ static void bamboo_init(ram_addr_t ram_size, env = ppc440ep_init(&ram_size, &pcibus, pci_irq_nrs, 1, cpu_model); if (pcibus) { - /* Add virtio console devices */ - for(i = 0; i < MAX_VIRTIO_CONSOLES; i++) { - if (virtcon_hds[i]) { - pci_create_simple(pcibus, -1, "virtio-console-pci"); - } - } - /* Register network interfaces. */ for (i = 0; i < nb_nics; i++) { /* There are no PCI NICs on the Bamboo board, but there are @@ -321,13 +321,9 @@ void qdev_machine_creation_done(void) CharDriverState *qdev_init_chardev(DeviceState *dev) { static int next_serial; - static int next_virtconsole; - /* FIXME: This is a nasty hack that needs to go away. */ - if (strncmp(dev->info->name, "virtio", 6) == 0) { - return virtcon_hds[next_virtconsole++]; - } else { - return serial_hds[next_serial++]; - } + + /* FIXME: This function needs to go away: use chardev properties! */ + return serial_hds[next_serial++]; } BusState *qdev_get_parent_bus(DeviceState *dev) diff --git a/hw/s390-virtio-bus.c b/hw/s390-virtio-bus.c index 980e7ebbe8..6b6dafc196 100644 --- a/hw/s390-virtio-bus.c +++ b/hw/s390-virtio-bus.c @@ -26,7 +26,7 @@ #include "loader.h" #include "elf.h" #include "hw/virtio.h" -#include "hw/virtio-console.h" +#include "hw/virtio-serial.h" #include "hw/sysbus.h" #include "kvm.h" @@ -131,7 +131,7 @@ static int s390_virtio_blk_init(VirtIOS390Device *dev) return s390_virtio_device_init(dev, vdev); } -static int s390_virtio_console_init(VirtIOS390Device *dev) +static int s390_virtio_serial_init(VirtIOS390Device *dev) { VirtIOS390Bus *bus; VirtIODevice *vdev; @@ -139,7 +139,7 @@ static int s390_virtio_console_init(VirtIOS390Device *dev) bus = DO_UPCAST(VirtIOS390Bus, bus, dev->qdev.parent_bus); - vdev = virtio_console_init((DeviceState *)dev); + vdev = virtio_serial_init((DeviceState *)dev, dev->max_virtserial_ports); if (!vdev) { return -1; } @@ -342,11 +342,14 @@ static VirtIOS390DeviceInfo s390_virtio_blk = { }, }; -static VirtIOS390DeviceInfo s390_virtio_console = { - .init = s390_virtio_console_init, - .qdev.name = "virtio-console-s390", +static VirtIOS390DeviceInfo s390_virtio_serial = { + .init = s390_virtio_serial_init, + .qdev.name = "virtio-serial-s390", + .qdev.alias = "virtio-serial", .qdev.size = sizeof(VirtIOS390Device), .qdev.props = (Property[]) { + DEFINE_PROP_UINT32("max_ports", VirtIOS390Device, max_virtserial_ports, + 31), DEFINE_PROP_END_OF_LIST(), }, }; @@ -370,7 +373,7 @@ static void s390_virtio_bus_register_withprop(VirtIOS390DeviceInfo *info) static void s390_virtio_register(void) { - s390_virtio_bus_register_withprop(&s390_virtio_console); + s390_virtio_bus_register_withprop(&s390_virtio_serial); s390_virtio_bus_register_withprop(&s390_virtio_blk); s390_virtio_bus_register_withprop(&s390_virtio_net); } diff --git a/hw/s390-virtio-bus.h b/hw/s390-virtio-bus.h index 8ae206563e..8e4763a184 100644 --- a/hw/s390-virtio-bus.h +++ b/hw/s390-virtio-bus.h @@ -41,6 +41,8 @@ typedef struct VirtIOS390Device { DriveInfo *dinfo; NICConf nic; uint32_t host_features; + /* Max. number of ports we can have for a the virtio-serial device */ + uint32_t max_virtserial_ports; } VirtIOS390Device; typedef struct VirtIOS390Bus { diff --git a/hw/s390-virtio.c b/hw/s390-virtio.c index 0fa6ba68c9..3582728378 100644 --- a/hw/s390-virtio.c +++ b/hw/s390-virtio.c @@ -26,7 +26,6 @@ #include "loader.h" #include "elf.h" #include "hw/virtio.h" -#include "hw/virtio-console.h" #include "hw/sysbus.h" #include "kvm.h" @@ -207,13 +206,6 @@ static void s390_init(ram_addr_t ram_size, strlen(kernel_cmdline), 1); } - /* Create VirtIO console */ - for(i = 0; i < MAX_VIRTIO_CONSOLES; i++) { - if (virtcon_hds[i]) { - qdev_init_nofail(qdev_create((BusState *)s390_bus, "virtio-console-s390")); - } - } - /* Create VirtIO network adapters */ for(i = 0; i < nb_nics; i++) { NICInfo *nd = &nd_table[i]; diff --git a/hw/virtio-console.c b/hw/virtio-console.c deleted file mode 100644 index 4f18ef29cb..0000000000 --- a/hw/virtio-console.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Virtio Console Device - * - * Copyright IBM, Corp. 2008 - * - * Authors: - * Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> - * - * This work is licensed under the terms of the GNU GPL, version 2. See - * the COPYING file in the top-level directory. - * - */ - -#include "hw.h" -#include "qemu-char.h" -#include "virtio.h" -#include "virtio-console.h" - - -typedef struct VirtIOConsole -{ - VirtIODevice vdev; - VirtQueue *ivq, *ovq; - CharDriverState *chr; -} VirtIOConsole; - -static VirtIOConsole *to_virtio_console(VirtIODevice *vdev) -{ - return (VirtIOConsole *)vdev; -} - -static void virtio_console_handle_output(VirtIODevice *vdev, VirtQueue *vq) -{ - VirtIOConsole *s = to_virtio_console(vdev); - VirtQueueElement elem; - - while (virtqueue_pop(vq, &elem)) { - ssize_t len = 0; - int d; - - for (d = 0; d < elem.out_num; d++) { - len += qemu_chr_write(s->chr, (uint8_t *)elem.out_sg[d].iov_base, - elem.out_sg[d].iov_len); - } - virtqueue_push(vq, &elem, len); - virtio_notify(vdev, vq); - } -} - -static void virtio_console_handle_input(VirtIODevice *vdev, VirtQueue *vq) -{ -} - -static uint32_t virtio_console_get_features(VirtIODevice *vdev, uint32_t f) -{ - return f; -} - -static int vcon_can_read(void *opaque) -{ - VirtIOConsole *s = (VirtIOConsole *) opaque; - - if (!virtio_queue_ready(s->ivq) || - !(s->vdev.status & VIRTIO_CONFIG_S_DRIVER_OK) || - virtio_queue_empty(s->ivq)) - return 0; - - /* current implementations have a page sized buffer. - * We fall back to a one byte per read if there is not enough room. - * It would be cool to have a function that returns the available byte - * instead of checking for a limit */ - if (virtqueue_avail_bytes(s->ivq, TARGET_PAGE_SIZE, 0)) - return TARGET_PAGE_SIZE; - if (virtqueue_avail_bytes(s->ivq, 1, 0)) - return 1; - return 0; -} - -static void vcon_read(void *opaque, const uint8_t *buf, int size) -{ - VirtIOConsole *s = (VirtIOConsole *) opaque; - VirtQueueElement elem; - int offset = 0; - - /* The current kernel implementation has only one outstanding input - * buffer of PAGE_SIZE. Nevertheless, this function is prepared to - * handle multiple buffers with multiple sg element for input */ - while (offset < size) { - int i = 0; - if (!virtqueue_pop(s->ivq, &elem)) - break; - while (offset < size && i < elem.in_num) { - int len = MIN(elem.in_sg[i].iov_len, size - offset); - memcpy(elem.in_sg[i].iov_base, buf + offset, len); - offset += len; - i++; - } - virtqueue_push(s->ivq, &elem, size); - } - virtio_notify(&s->vdev, s->ivq); -} - -static void vcon_event(void *opaque, int event) -{ - /* we will ignore any event for the time being */ -} - -static void virtio_console_save(QEMUFile *f, void *opaque) -{ - VirtIOConsole *s = opaque; - - virtio_save(&s->vdev, f); -} - -static int virtio_console_load(QEMUFile *f, void *opaque, int version_id) -{ - VirtIOConsole *s = opaque; - - if (version_id != 1) - return -EINVAL; - - virtio_load(&s->vdev, f); - return 0; -} - -VirtIODevice *virtio_console_init(DeviceState *dev) -{ - VirtIOConsole *s; - s = (VirtIOConsole *)virtio_common_init("virtio-console", - VIRTIO_ID_CONSOLE, - 0, sizeof(VirtIOConsole)); - s->vdev.get_features = virtio_console_get_features; - - s->ivq = virtio_add_queue(&s->vdev, 128, virtio_console_handle_input); - s->ovq = virtio_add_queue(&s->vdev, 128, virtio_console_handle_output); - - s->chr = qdev_init_chardev(dev); - qemu_chr_add_handlers(s->chr, vcon_can_read, vcon_read, vcon_event, s); - - register_savevm("virtio-console", -1, 1, virtio_console_save, virtio_console_load, s); - - return &s->vdev; -} diff --git a/hw/virtio-console.h b/hw/virtio-console.h deleted file mode 100644 index 84d0717744..0000000000 --- a/hw/virtio-console.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Virtio Console Support - * - * Copyright IBM, Corp. 2008 - * - * Authors: - * Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> - * - * This work is licensed under the terms of the GNU GPL, version 2. See - * the COPYING file in the top-level directory. - * - */ -#ifndef _QEMU_VIRTIO_CONSOLE_H -#define _QEMU_VIRTIO_CONSOLE_H - -/* The ID for virtio console */ -#define VIRTIO_ID_CONSOLE 3 - -#endif diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c index 573c98a08b..e7fabfb16b 100644 --- a/hw/virtio-pci.c +++ b/hw/virtio-pci.c @@ -95,6 +95,8 @@ typedef struct { DriveInfo *dinfo; NICConf nic; uint32_t host_features; + /* Max. number of ports we can have for a the virtio-serial device */ + uint32_t max_virtserial_ports; } VirtIOPCIProxy; /* virtio device */ @@ -483,7 +485,7 @@ static int virtio_blk_exit_pci(PCIDevice *pci_dev) return virtio_exit_pci(pci_dev); } -static int virtio_console_init_pci(PCIDevice *pci_dev) +static int virtio_serial_init_pci(PCIDevice *pci_dev) { VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev); VirtIODevice *vdev; @@ -493,7 +495,7 @@ static int virtio_console_init_pci(PCIDevice *pci_dev) proxy->class_code != PCI_CLASS_OTHERS) /* qemu-kvm */ proxy->class_code = PCI_CLASS_COMMUNICATION_OTHER; - vdev = virtio_console_init(&pci_dev->qdev); + vdev = virtio_serial_init(&pci_dev->qdev, proxy->max_virtserial_ports); if (!vdev) { return -1; } @@ -573,13 +575,16 @@ static PCIDeviceInfo virtio_info[] = { }, .qdev.reset = virtio_pci_reset, },{ - .qdev.name = "virtio-console-pci", + .qdev.name = "virtio-serial-pci", + .qdev.alias = "virtio-serial", .qdev.size = sizeof(VirtIOPCIProxy), - .init = virtio_console_init_pci, + .init = virtio_serial_init_pci, .exit = virtio_exit_pci, .qdev.props = (Property[]) { DEFINE_PROP_HEX32("class", VirtIOPCIProxy, class_code, 0), DEFINE_VIRTIO_COMMON_FEATURES(VirtIOPCIProxy, host_features), + DEFINE_PROP_UINT32("max_ports", VirtIOPCIProxy, max_virtserial_ports, + 31), DEFINE_PROP_END_OF_LIST(), }, .qdev.reset = virtio_pci_reset, diff --git a/hw/virtio-serial-bus.c b/hw/virtio-serial-bus.c new file mode 100644 index 0000000000..e8bbd7d3ee --- /dev/null +++ b/hw/virtio-serial-bus.c @@ -0,0 +1,507 @@ +/* + * A bus for connecting virtio serial and console ports + * + * Copyright (C) 2009 Red Hat, Inc. + * + * Author(s): + * Amit Shah <amit.shah@redhat.com> + * + * Some earlier parts are: + * Copyright IBM, Corp. 2008 + * authored by + * Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + */ + +#include "monitor.h" +#include "qemu-queue.h" +#include "sysbus.h" +#include "virtio-serial.h" + +/* The virtio-serial bus on top of which the ports will ride as devices */ +struct VirtIOSerialBus { + BusState qbus; + + /* This is the parent device that provides the bus for ports. */ + VirtIOSerial *vser; + + /* The maximum number of ports that can ride on top of this bus */ + uint32_t max_nr_ports; +}; + +struct VirtIOSerial { + VirtIODevice vdev; + + VirtQueue *c_ivq, *c_ovq; + /* Arrays of ivqs and ovqs: one per port */ + VirtQueue **ivqs, **ovqs; + + VirtIOSerialBus *bus; + + QTAILQ_HEAD(, VirtIOSerialPort) ports; + struct virtio_console_config config; +}; + +static VirtIOSerialPort *find_port_by_id(VirtIOSerial *vser, uint32_t id) +{ + VirtIOSerialPort *port; + + QTAILQ_FOREACH(port, &vser->ports, next) { + if (port->id == id) + return port; + } + return NULL; +} + +static VirtIOSerialPort *find_port_by_vq(VirtIOSerial *vser, VirtQueue *vq) +{ + VirtIOSerialPort *port; + + QTAILQ_FOREACH(port, &vser->ports, next) { + if (port->ivq == vq || port->ovq == vq) + return port; + } + return NULL; +} + +static size_t write_to_port(VirtIOSerialPort *port, + const uint8_t *buf, size_t size) +{ + VirtQueueElement elem; + VirtQueue *vq; + size_t offset = 0; + size_t len = 0; + + vq = port->ivq; + if (!virtio_queue_ready(vq)) { + return 0; + } + if (!size) { + return 0; + } + + while (offset < size) { + int i; + + if (!virtqueue_pop(vq, &elem)) { + break; + } + + for (i = 0; offset < size && i < elem.in_num; i++) { + len = MIN(elem.in_sg[i].iov_len, size - offset); + + memcpy(elem.in_sg[i].iov_base, buf + offset, len); + offset += len; + } + virtqueue_push(vq, &elem, len); + } + + virtio_notify(&port->vser->vdev, vq); + return offset; +} + +static size_t send_control_msg(VirtIOSerialPort *port, void *buf, size_t len) +{ + VirtQueueElement elem; + VirtQueue *vq; + struct virtio_console_control *cpkt; + + vq = port->vser->c_ivq; + if (!virtio_queue_ready(vq)) { + return 0; + } + if (!virtqueue_pop(vq, &elem)) { + return 0; + } + + cpkt = (struct virtio_console_control *)buf; + stl_p(&cpkt->id, port->id); + memcpy(elem.in_sg[0].iov_base, buf, len); + + virtqueue_push(vq, &elem, len); + virtio_notify(&port->vser->vdev, vq); + return len; +} + +static size_t send_control_event(VirtIOSerialPort *port, uint16_t event, + uint16_t value) +{ + struct virtio_console_control cpkt; + + stw_p(&cpkt.event, event); + stw_p(&cpkt.value, value); + + return send_control_msg(port, &cpkt, sizeof(cpkt)); +} + +/* Functions for use inside qemu to open and read from/write to ports */ +int virtio_serial_open(VirtIOSerialPort *port) +{ + return 0; +} + +int virtio_serial_close(VirtIOSerialPort *port) +{ + return 0; +} + +/* Individual ports/apps call this function to write to the guest. */ +ssize_t virtio_serial_write(VirtIOSerialPort *port, const uint8_t *buf, + size_t size) +{ + return write_to_port(port, buf, size); +} + +/* + * Readiness of the guest to accept data on a port. + * Returns max. data the guest can receive + */ +size_t virtio_serial_guest_ready(VirtIOSerialPort *port) +{ + VirtQueue *vq = port->ivq; + + if (!virtio_queue_ready(vq) || + !(port->vser->vdev.status & VIRTIO_CONFIG_S_DRIVER_OK) || + virtio_queue_empty(vq)) { + return 0; + } + + if (virtqueue_avail_bytes(vq, 4096, 0)) { + return 4096; + } + if (virtqueue_avail_bytes(vq, 1, 0)) { + return 1; + } + return 0; +} + +/* Guest wants to notify us of some event */ +static void handle_control_message(VirtIOSerial *vser, void *buf) +{ + struct VirtIOSerialPort *port; + struct virtio_console_control cpkt, *gcpkt; + + gcpkt = buf; + port = find_port_by_id(vser, ldl_p(&gcpkt->id)); + if (!port) + return; + + cpkt.event = lduw_p(&gcpkt->event); + cpkt.value = lduw_p(&gcpkt->value); + + switch(cpkt.event) { + case VIRTIO_CONSOLE_PORT_READY: + /* + * Now that we know the guest asked for the port name, we're + * sure the guest has initialised whatever state is necessary + * for this port. Now's a good time to let the guest know if + * this port is a console port so that the guest can hook it + * up to hvc. + */ + if (port->is_console) { + send_control_event(port, VIRTIO_CONSOLE_CONSOLE_PORT, 1); + } + /* + * When the guest has asked us for this information it means + * the guest is all setup and has its virtqueues + * initialised. If some app is interested in knowing about + * this event, let it know. + */ + if (port->info->guest_ready) { + port->info->guest_ready(port); + } + break; + } +} + +static void control_in(VirtIODevice *vdev, VirtQueue *vq) +{ +} + +static void control_out(VirtIODevice *vdev, VirtQueue *vq) +{ + VirtQueueElement elem; + VirtIOSerial *vser; + + vser = DO_UPCAST(VirtIOSerial, vdev, vdev); + + while (virtqueue_pop(vq, &elem)) { + handle_control_message(vser, elem.out_sg[0].iov_base); + virtqueue_push(vq, &elem, elem.out_sg[0].iov_len); + } + virtio_notify(vdev, vq); +} + +/* Guest wrote something to some port. */ +static void handle_output(VirtIODevice *vdev, VirtQueue *vq) +{ + VirtIOSerial *vser; + VirtQueueElement elem; + + vser = DO_UPCAST(VirtIOSerial, vdev, vdev); + + while (virtqueue_pop(vq, &elem)) { + VirtIOSerialPort *port; + size_t ret; + + port = find_port_by_vq(vser, vq); + if (!port) { + ret = 0; + goto next_buf; + } + + /* + * A port may not have any handler registered for consuming the + * data that the guest sends or it may not have a chardev associated + * with it. Just ignore the data in that case. + */ + if (!port->info->have_data) { + ret = 0; + goto next_buf; + } + + /* The guest always sends only one sg */ + ret = port->info->have_data(port, elem.out_sg[0].iov_base, + elem.out_sg[0].iov_len); + + next_buf: + virtqueue_push(vq, &elem, ret); + } + virtio_notify(vdev, vq); +} + +static void handle_input(VirtIODevice *vdev, VirtQueue *vq) +{ +} + +static uint32_t get_features(VirtIODevice *vdev, uint32_t features) +{ + features |= (1 << VIRTIO_CONSOLE_F_MULTIPORT); + + return features; +} + +/* Guest requested config info */ +static void get_config(VirtIODevice *vdev, uint8_t *config_data) +{ + VirtIOSerial *vser; + + vser = DO_UPCAST(VirtIOSerial, vdev, vdev); + memcpy(config_data, &vser->config, sizeof(struct virtio_console_config)); +} + +static void set_config(VirtIODevice *vdev, const uint8_t *config_data) +{ + struct virtio_console_config config; + + memcpy(&config, config_data, sizeof(config)); +} + +static void virtio_serial_save(QEMUFile *f, void *opaque) +{ + VirtIOSerial *s = opaque; + + /* The virtio device */ + virtio_save(&s->vdev, f); + + /* The config space */ + qemu_put_be16s(f, &s->config.cols); + qemu_put_be16s(f, &s->config.rows); + qemu_put_be32s(f, &s->config.nr_ports); +} + +static int virtio_serial_load(QEMUFile *f, void *opaque, int version_id) +{ + VirtIOSerial *s = opaque; + + if (version_id > 2) { + return -EINVAL; + } + /* The virtio device */ + virtio_load(&s->vdev, f); + + if (version_id < 2) { + return 0; + } + + /* The config space */ + qemu_get_be16s(f, &s->config.cols); + qemu_get_be16s(f, &s->config.rows); + s->config.nr_ports = qemu_get_be32(f); + + return 0; +} + +static void virtser_bus_dev_print(Monitor *mon, DeviceState *qdev, int indent); + +static struct BusInfo virtser_bus_info = { + .name = "virtio-serial-bus", + .size = sizeof(VirtIOSerialBus), + .print_dev = virtser_bus_dev_print, +}; + +static VirtIOSerialBus *virtser_bus_new(DeviceState *dev) +{ + VirtIOSerialBus *bus; + + bus = FROM_QBUS(VirtIOSerialBus, qbus_create(&virtser_bus_info, dev, + "virtio-serial-bus")); + bus->qbus.allow_hotplug = 1; + + return bus; +} + +static void virtser_bus_dev_print(Monitor *mon, DeviceState *qdev, int indent) +{ + VirtIOSerialDevice *dev = DO_UPCAST(VirtIOSerialDevice, qdev, qdev); + VirtIOSerialPort *port = DO_UPCAST(VirtIOSerialPort, dev, &dev->qdev); + + monitor_printf(mon, "%*s dev-prop-int: id: %u\n", + indent, "", port->id); +} + +static int virtser_port_qdev_init(DeviceState *qdev, DeviceInfo *base) +{ + VirtIOSerialDevice *dev = DO_UPCAST(VirtIOSerialDevice, qdev, qdev); + VirtIOSerialPortInfo *info = DO_UPCAST(VirtIOSerialPortInfo, qdev, base); + VirtIOSerialPort *port = DO_UPCAST(VirtIOSerialPort, dev, &dev->qdev); + VirtIOSerialBus *bus = DO_UPCAST(VirtIOSerialBus, qbus, qdev->parent_bus); + int ret; + bool plugging_port0; + + port->vser = bus->vser; + + /* + * Is the first console port we're seeing? If so, put it up at + * location 0. This is done for backward compatibility (old + * kernel, new qemu). + */ + plugging_port0 = port->is_console && !find_port_by_id(port->vser, 0); + + if (port->vser->config.nr_ports == bus->max_nr_ports && !plugging_port0) { + qemu_error("virtio-serial-bus: Maximum device limit reached\n"); + return -1; + } + dev->info = info; + + ret = info->init(dev); + if (ret) { + return ret; + } + + port->id = plugging_port0 ? 0 : port->vser->config.nr_ports++; + + QTAILQ_INSERT_TAIL(&port->vser->ports, port, next); + port->ivq = port->vser->ivqs[port->id]; + port->ovq = port->vser->ovqs[port->id]; + + /* Send an update to the guest about this new port added */ + virtio_notify_config(&port->vser->vdev); + + return ret; +} + +static int virtser_port_qdev_exit(DeviceState *qdev) +{ + VirtIOSerialDevice *dev = DO_UPCAST(VirtIOSerialDevice, qdev, qdev); + VirtIOSerialPort *port = DO_UPCAST(VirtIOSerialPort, dev, &dev->qdev); + VirtIOSerial *vser = port->vser; + + /* + * Don't decrement nr_ports here; thus we keep a linearly + * increasing port id. Not utilising an id again saves us a couple + * of complications: + * + * - Not having to bother about sending the port id to the guest + * kernel on hotplug or on addition of new ports; the guest can + * also linearly increment the port number. This is preferable + * because the config space won't have the need to store a + * ports_map. + * + * - Extra state to be stored for all the "holes" that got created + * so that we keep filling in the ids from the least available + * index. + * + * When such a functionality is desired, a control message to add + * a port can be introduced. + */ + QTAILQ_REMOVE(&vser->ports, port, next); + + if (port->info->exit) + port->info->exit(dev); + + return 0; +} + +void virtio_serial_port_qdev_register(VirtIOSerialPortInfo *info) +{ + info->qdev.init = virtser_port_qdev_init; + info->qdev.bus_info = &virtser_bus_info; + info->qdev.exit = virtser_port_qdev_exit; + info->qdev.unplug = qdev_simple_unplug_cb; + qdev_register(&info->qdev); +} + +VirtIODevice *virtio_serial_init(DeviceState *dev, uint32_t max_nr_ports) +{ + VirtIOSerial *vser; + VirtIODevice *vdev; + uint32_t i; + + if (!max_nr_ports) + return NULL; + + vdev = virtio_common_init("virtio-serial", VIRTIO_ID_CONSOLE, + sizeof(struct virtio_console_config), + sizeof(VirtIOSerial)); + + vser = DO_UPCAST(VirtIOSerial, vdev, vdev); + + /* Spawn a new virtio-serial bus on which the ports will ride as devices */ + vser->bus = virtser_bus_new(dev); + vser->bus->vser = vser; + QTAILQ_INIT(&vser->ports); + + vser->bus->max_nr_ports = max_nr_ports; + vser->ivqs = qemu_malloc(max_nr_ports * sizeof(VirtQueue *)); + vser->ovqs = qemu_malloc(max_nr_ports * sizeof(VirtQueue *)); + + /* Add a queue for host to guest transfers for port 0 (backward compat) */ + vser->ivqs[0] = virtio_add_queue(vdev, 128, handle_input); + /* Add a queue for guest to host transfers for port 0 (backward compat) */ + vser->ovqs[0] = virtio_add_queue(vdev, 128, handle_output); + + /* control queue: host to guest */ + vser->c_ivq = virtio_add_queue(vdev, 16, control_in); + /* control queue: guest to host */ + vser->c_ovq = virtio_add_queue(vdev, 16, control_out); + + for (i = 1; i < vser->bus->max_nr_ports; i++) { + /* Add a per-port queue for host to guest transfers */ + vser->ivqs[i] = virtio_add_queue(vdev, 128, handle_input); + /* Add a per-per queue for guest to host transfers */ + vser->ovqs[i] = virtio_add_queue(vdev, 128, handle_output); + } + + vser->config.max_nr_ports = max_nr_ports; + /* + * Reserve location 0 for a console port for backward compat + * (old kernel, new qemu) + */ + vser->config.nr_ports = 1; + + vser->vdev.get_features = get_features; + vser->vdev.get_config = get_config; + vser->vdev.set_config = set_config; + + /* + * Register for the savevm section with the virtio-console name + * to preserve backward compat + */ + register_savevm("virtio-console", -1, 2, virtio_serial_save, + virtio_serial_load, vser); + + return vdev; +} diff --git a/hw/virtio-serial.c b/hw/virtio-serial.c new file mode 100644 index 0000000000..1dc031eb29 --- /dev/null +++ b/hw/virtio-serial.c @@ -0,0 +1,111 @@ +/* + * Virtio Console and Generic Serial Port Devices + * + * Copyright Red Hat, Inc. 2009 + * + * Authors: + * Amit Shah <amit.shah@redhat.com> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + */ + +#include "qemu-char.h" +#include "virtio-serial.h" + +typedef struct VirtConsole { + VirtIOSerialPort port; + CharDriverState *chr; +} VirtConsole; + + +/* Callback function that's called when the guest sends us data */ +static size_t flush_buf(VirtIOSerialPort *port, const uint8_t *buf, size_t len) +{ + VirtConsole *vcon = DO_UPCAST(VirtConsole, port, port); + ssize_t ret; + + ret = qemu_chr_write(vcon->chr, buf, len); + + return ret < 0 ? 0 : ret; +} + +/* Readiness of the guest to accept data on a port */ +static int chr_can_read(void *opaque) +{ + VirtConsole *vcon = opaque; + + return virtio_serial_guest_ready(&vcon->port); +} + +/* Send data from a char device over to the guest */ +static void chr_read(void *opaque, const uint8_t *buf, int size) +{ + VirtConsole *vcon = opaque; + + virtio_serial_write(&vcon->port, buf, size); +} + +static void chr_event(void *opaque, int event) +{ + VirtConsole *vcon = opaque; + + switch (event) { + case CHR_EVENT_OPENED: { + virtio_serial_open(&vcon->port); + break; + } + case CHR_EVENT_CLOSED: + virtio_serial_close(&vcon->port); + break; + } +} + +/* Virtio Console Ports */ +static int virtconsole_initfn(VirtIOSerialDevice *dev) +{ + VirtIOSerialPort *port = DO_UPCAST(VirtIOSerialPort, dev, &dev->qdev); + VirtConsole *vcon = DO_UPCAST(VirtConsole, port, port); + + port->info = dev->info; + + port->is_console = true; + + if (vcon->chr) { + qemu_chr_add_handlers(vcon->chr, chr_can_read, chr_read, chr_event, + vcon); + port->info->have_data = flush_buf; + } + return 0; +} + +static int virtconsole_exitfn(VirtIOSerialDevice *dev) +{ + VirtIOSerialPort *port = DO_UPCAST(VirtIOSerialPort, dev, &dev->qdev); + VirtConsole *vcon = DO_UPCAST(VirtConsole, port, port); + + if (vcon->chr) { + port->info->have_data = NULL; + qemu_chr_close(vcon->chr); + } + + return 0; +} + +static VirtIOSerialPortInfo virtconsole_info = { + .qdev.name = "virtconsole", + .qdev.size = sizeof(VirtConsole), + .init = virtconsole_initfn, + .exit = virtconsole_exitfn, + .qdev.props = (Property[]) { + DEFINE_PROP_UINT8("is_console", VirtConsole, port.is_console, 1), + DEFINE_PROP_CHR("chardev", VirtConsole, chr), + DEFINE_PROP_END_OF_LIST(), + }, +}; + +static void virtconsole_register(void) +{ + virtio_serial_port_qdev_register(&virtconsole_info); +} +device_init(virtconsole_register) diff --git a/hw/virtio-serial.h b/hw/virtio-serial.h new file mode 100644 index 0000000000..fe8e357a75 --- /dev/null +++ b/hw/virtio-serial.h @@ -0,0 +1,158 @@ +/* + * Virtio Serial / Console Support + * + * Copyright IBM, Corp. 2008 + * Copyright Red Hat, Inc. 2009 + * + * Authors: + * Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> + * Amit Shah <amit.shah@redhat.com> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + * + */ +#ifndef _QEMU_VIRTIO_SERIAL_H +#define _QEMU_VIRTIO_SERIAL_H + +#include <stdbool.h> +#include "qdev.h" +#include "virtio.h" + +/* == Interface shared between the guest kernel and qemu == */ + +/* The Virtio ID for virtio console / serial ports */ +#define VIRTIO_ID_CONSOLE 3 + +/* Features supported */ +#define VIRTIO_CONSOLE_F_MULTIPORT 1 + +struct virtio_console_config { + /* + * These two fields are used by VIRTIO_CONSOLE_F_SIZE which + * isn't implemented here yet + */ + uint16_t cols; + uint16_t rows; + + uint32_t max_nr_ports; + uint32_t nr_ports; +} __attribute__((packed)); + +struct virtio_console_control { + uint32_t id; /* Port number */ + uint16_t event; /* The kind of control event (see below) */ + uint16_t value; /* Extra information for the key */ +}; + +/* Some events for the internal messages (control packets) */ +#define VIRTIO_CONSOLE_PORT_READY 0 +#define VIRTIO_CONSOLE_CONSOLE_PORT 1 +#define VIRTIO_CONSOLE_RESIZE 2 + +/* == In-qemu interface == */ + +typedef struct VirtIOSerial VirtIOSerial; +typedef struct VirtIOSerialBus VirtIOSerialBus; +typedef struct VirtIOSerialPort VirtIOSerialPort; +typedef struct VirtIOSerialPortInfo VirtIOSerialPortInfo; + +typedef struct VirtIOSerialDevice { + DeviceState qdev; + VirtIOSerialPortInfo *info; +} VirtIOSerialDevice; + +/* + * This is the state that's shared between all the ports. Some of the + * state is configurable via command-line options. Some of it can be + * set by individual devices in their initfn routines. Some of the + * state is set by the generic qdev device init routine. + */ +struct VirtIOSerialPort { + DeviceState dev; + VirtIOSerialPortInfo *info; + + QTAILQ_ENTRY(VirtIOSerialPort) next; + + /* + * This field gives us the virtio device as well as the qdev bus + * that we are associated with + */ + VirtIOSerial *vser; + + VirtQueue *ivq, *ovq; + + /* + * This id helps identify ports between the guest and the host. + * The guest sends a "header" with this id with each data packet + * that it sends and the host can then find out which associated + * device to send out this data to + */ + uint32_t id; + + /* Identify if this is a port that binds with hvc in the guest */ + uint8_t is_console; +}; + +struct VirtIOSerialPortInfo { + DeviceInfo qdev; + /* + * The per-port (or per-app) init function that's called when a + * new device is found on the bus. + */ + int (*init)(VirtIOSerialDevice *dev); + /* + * Per-port exit function that's called when a port gets + * hot-unplugged or removed. + */ + int (*exit)(VirtIOSerialDevice *dev); + + /* Callbacks for guest events */ + /* Guest opened device. */ + void (*guest_open)(VirtIOSerialPort *port); + /* Guest closed device. */ + void (*guest_close)(VirtIOSerialPort *port); + + /* Guest is now ready to accept data (virtqueues set up). */ + void (*guest_ready)(VirtIOSerialPort *port); + + /* + * Guest wrote some data to the port. This data is handed over to + * the app via this callback. The app should return the number of + * bytes it successfully consumed. + */ + size_t (*have_data)(VirtIOSerialPort *port, const uint8_t *buf, size_t len); +}; + +/* Interface to the virtio-serial bus */ + +/* + * Individual ports/apps should call this function to register the port + * with the virtio-serial bus + */ +void virtio_serial_port_qdev_register(VirtIOSerialPortInfo *info); + +/* + * Open a connection to the port + * Returns 0 on success (always). + */ +int virtio_serial_open(VirtIOSerialPort *port); + +/* + * Close the connection to the port + * Returns 0 on success (always). + */ +int virtio_serial_close(VirtIOSerialPort *port); + +/* + * Send data to Guest + */ +ssize_t virtio_serial_write(VirtIOSerialPort *port, const uint8_t *buf, + size_t size); + +/* + * Query whether a guest is ready to receive data. + */ +size_t virtio_serial_guest_ready(VirtIOSerialPort *port); + +#endif diff --git a/hw/virtio.h b/hw/virtio.h index 7b2b327c99..62e882bb67 100644 --- a/hw/virtio.h +++ b/hw/virtio.h @@ -171,7 +171,7 @@ void virtio_bind_device(VirtIODevice *vdev, const VirtIOBindings *binding, /* Base devices. */ VirtIODevice *virtio_blk_init(DeviceState *dev, DriveInfo *dinfo); VirtIODevice *virtio_net_init(DeviceState *dev, NICConf *conf); -VirtIODevice *virtio_console_init(DeviceState *dev); +VirtIODevice *virtio_serial_init(DeviceState *dev, uint32_t max_nr_ports); VirtIODevice *virtio_balloon_init(DeviceState *dev); void virtio_net_exit(VirtIODevice *vdev); diff --git a/qemu-options.hx b/qemu-options.hx index 5d7babf0db..ee60d8ad11 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -1891,6 +1891,10 @@ DEF("virtioconsole", HAS_ARG, QEMU_OPTION_virtiocon, \ STEXI @item -virtioconsole @var{c} Set virtio console. + +This option is maintained for backward compatibility. + +Please use @code{-device virtconsole} for the new way of invocation. ETEXI DEF("show-cursor", 0, QEMU_OPTION_show_cursor, \ @@ -231,12 +231,6 @@ extern CharDriverState *serial_hds[MAX_SERIAL_PORTS]; extern CharDriverState *parallel_hds[MAX_PARALLEL_PORTS]; -/* virtio consoles */ - -#define MAX_VIRTIO_CONSOLES 1 - -extern CharDriverState *virtcon_hds[MAX_VIRTIO_CONSOLES]; - #define TFR(expr) do { if ((expr) != -1) break; } while (errno == EINTR) #ifdef HAS_AUDIO @@ -173,6 +173,8 @@ int main(int argc, char **argv) #define DEFAULT_RAM_SIZE 128 +#define MAX_VIRTIO_CONSOLES 1 + static const char *data_dir; const char *bios_name = NULL; /* Note: drives_table[MAX_DRIVES] is a dummy block driver if none available |