diff options
| -rw-r--r-- | hw/Makefile.objs | 1 | ||||
| -rw-r--r-- | hw/puv3.c | 1 | ||||
| -rw-r--r-- | hw/puv3_dma.c | 109 |
3 files changed, 111 insertions, 0 deletions
diff --git a/hw/Makefile.objs b/hw/Makefile.objs index d84b2215d4..3ba5dd0c6b 100644 --- a/hw/Makefile.objs +++ b/hw/Makefile.objs @@ -71,6 +71,7 @@ hw-obj-$(CONFIG_PUV3) += puv3_intc.o hw-obj-$(CONFIG_PUV3) += puv3_ost.o hw-obj-$(CONFIG_PUV3) += puv3_gpio.o hw-obj-$(CONFIG_PUV3) += puv3_pm.o +hw-obj-$(CONFIG_PUV3) += puv3_dma.o # PCI watchdog devices hw-obj-$(CONFIG_PCI) += wdt_i6300esb.o @@ -49,6 +49,7 @@ static void puv3_soc_init(CPUUniCore32State *env) /* Initialize minimal necessary devices for kernel booting */ sysbus_create_simple("puv3_pm", PUV3_PM_BASE, NULL); + sysbus_create_simple("puv3_dma", PUV3_DMA_BASE, NULL); sysbus_create_simple("puv3_ost", PUV3_OST_BASE, irqs[PUV3_IRQS_OST0]); sysbus_create_varargs("puv3_gpio", PUV3_GPIO_BASE, irqs[PUV3_IRQS_GPIOLOW0], irqs[PUV3_IRQS_GPIOLOW1], diff --git a/hw/puv3_dma.c b/hw/puv3_dma.c new file mode 100644 index 0000000000..85b97bfdeb --- /dev/null +++ b/hw/puv3_dma.c @@ -0,0 +1,109 @@ +/* + * DMA device simulation in PKUnity SoC + * + * Copyright (C) 2010-2012 Guan Xuetao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation, or any later version. + * See the COPYING file in the top-level directory. + */ +#include "hw.h" +#include "sysbus.h" + +#undef DEBUG_PUV3 +#include "puv3.h" + +#define PUV3_DMA_CH_NR (6) +#define PUV3_DMA_CH_MASK (0xff) +#define PUV3_DMA_CH(offset) ((offset) >> 8) + +typedef struct { + SysBusDevice busdev; + MemoryRegion iomem; + uint32_t reg_CFG[PUV3_DMA_CH_NR]; +} PUV3DMAState; + +static uint64_t puv3_dma_read(void *opaque, target_phys_addr_t offset, + unsigned size) +{ + PUV3DMAState *s = opaque; + uint32_t ret = 0; + + assert(PUV3_DMA_CH(offset) < PUV3_DMA_CH_NR); + + switch (offset & PUV3_DMA_CH_MASK) { + case 0x10: + ret = s->reg_CFG[PUV3_DMA_CH(offset)]; + break; + default: + DPRINTF("Bad offset 0x%x\n", offset); + } + DPRINTF("offset 0x%x, value 0x%x\n", offset, ret); + + return ret; +} + +static void puv3_dma_write(void *opaque, target_phys_addr_t offset, + uint64_t value, unsigned size) +{ + PUV3DMAState *s = opaque; + + assert(PUV3_DMA_CH(offset) < PUV3_DMA_CH_NR); + + switch (offset & PUV3_DMA_CH_MASK) { + case 0x10: + s->reg_CFG[PUV3_DMA_CH(offset)] = value; + break; + default: + DPRINTF("Bad offset 0x%x\n", offset); + } + DPRINTF("offset 0x%x, value 0x%x\n", offset, value); +} + +static const MemoryRegionOps puv3_dma_ops = { + .read = puv3_dma_read, + .write = puv3_dma_write, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + }, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static int puv3_dma_init(SysBusDevice *dev) +{ + PUV3DMAState *s = FROM_SYSBUS(PUV3DMAState, dev); + int i; + + for (i = 0; i < PUV3_DMA_CH_NR; i++) { + s->reg_CFG[i] = 0x0; + } + + memory_region_init_io(&s->iomem, &puv3_dma_ops, s, "puv3_dma", + PUV3_REGS_OFFSET); + sysbus_init_mmio(dev, &s->iomem); + + return 0; +} + +static void puv3_dma_class_init(ObjectClass *klass, void *data) +{ + SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass); + + sdc->init = puv3_dma_init; +} + +static const TypeInfo puv3_dma_info = { + .name = "puv3_dma", + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(PUV3DMAState), + .class_init = puv3_dma_class_init, +}; + +static void puv3_dma_register_type(void) +{ + type_register_static(&puv3_dma_info); +} + +type_init(puv3_dma_register_type) |