diff options
| -rw-r--r-- | qemu-options.hx | 52 |
1 files changed, 52 insertions, 0 deletions
diff --git a/qemu-options.hx b/qemu-options.hx index 49afe6cd3b..94ab8806fb 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -382,6 +382,58 @@ Add device @var{driver}. @var{prop}=@var{value} sets driver properties. Valid properties depend on the driver. To get help on possible drivers and properties, use @code{-device help} and @code{-device @var{driver},help}. + +Some drivers are: +@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}] + +Add an IPMI BMC. This is a simulation of a hardware management +interface processor that normally sits on a system. It provides +a watchdog and the ability to reset and power control the system. +You need to connect this to an IPMI interface to make it useful + +The IPMI slave address to use for the BMC. The default is 0x20. +This address is the BMC's address on the I2C network of management +controllers. If you don't know what this means, it is safe to ignore +it. + +@item -device ipmi-bmc-extern,id=@var{id},chardev=@var{id}[,slave_addr=@var{val}] + +Add a connection to an external IPMI BMC simulator. Instead of +locally emulating the BMC like the above item, instead connect +to an external entity that provides the IPMI services. + +A connection is made to an external BMC simulator. If you do this, it +is strongly recommended that you use the "reconnect=" chardev option +to reconnect to the simulator if the connection is lost. Note that if +this is not used carefully, it can be a security issue, as the +interface has the ability to send resets, NMIs, and power off the VM. +It's best if QEMU makes a connection to an external simulator running +on a secure port on localhost, so neither the simulator nor QEMU is +exposed to any outside network. + +See the "lanserv/README.vm" file in the OpenIPMI library for more +details on the external interface. + +@item -device isa-ipmi-kcs,bmc=@var{id}[,ioport=@var{val}][,irq=@var{val}] + +Add a KCS IPMI interafce on the ISA bus. This also adds a +corresponding ACPI and SMBIOS entries, if appropriate. + +@table @option +@item bmc=@var{id} +The BMC to connect to, one of ipmi-bmc-sim or ipmi-bmc-extern above. +@item ioport=@var{val} +Define the I/O address of the interface. The default is 0xca0 for KCS. +@item irq=@var{val} +Define the interrupt to use. The default is 5. To disable interrupts, +set this to 0. +@end table + +@item -device isa-ipmi-bt,bmc=@var{id}[,ioport=@var{val}][,irq=@var{val}] + +Like the KCS interface, but defines a BT interface. The default port is +0xe4 and the default interrupt is 5. + ETEXI DEF("name", HAS_ARG, QEMU_OPTION_name, |