diff options
-rw-r--r-- | block/backup.c | 2 | ||||
-rw-r--r-- | block/curl.c | 6 | ||||
-rwxr-xr-x | configure | 71 | ||||
-rw-r--r-- | hw/audio/adlib.c | 2 | ||||
-rw-r--r-- | hw/block/pflash_cfi02.c | 2 | ||||
-rw-r--r-- | hw/s390x/css.c | 2 | ||||
-rw-r--r-- | hw/timer/exynos4210_rtc.c | 4 | ||||
-rw-r--r-- | include/hw/bt.h | 8 | ||||
-rw-r--r-- | libcacard/card_7816.c | 2 | ||||
-rw-r--r-- | libcacard/card_7816t.h | 2 | ||||
-rw-r--r-- | linux-headers/asm-powerpc/epapr_hcalls.h | 4 | ||||
-rw-r--r-- | migration-rdma.c | 14 | ||||
-rw-r--r-- | qmp-commands.hx | 26 | ||||
-rw-r--r-- | slirp/arp_table.c | 4 | ||||
-rw-r--r-- | slirp/socket.c | 2 | ||||
-rw-r--r-- | target-arm/translate.c | 4 | ||||
-rw-r--r-- | tcg/tci/tcg-target.c | 7 | ||||
-rw-r--r-- | tests/test-aio.c | 6 |
18 files changed, 81 insertions, 87 deletions
diff --git a/block/backup.c b/block/backup.c index e12b3b1461..23c7264488 100644 --- a/block/backup.c +++ b/block/backup.c @@ -290,7 +290,7 @@ static void coroutine_fn backup_run(void *opaque) for (i = 0; i < BACKUP_SECTORS_PER_CLUSTER;) { /* bdrv_co_is_allocated() only returns true/false based - * on the first set of sectors it comes accross that + * on the first set of sectors it comes across that * are are all in the same state. * For that reason we must verify each sector in the * backup cluster length. We end up copying more than diff --git a/block/curl.c b/block/curl.c index e566855f76..ca2cedcec1 100644 --- a/block/curl.c +++ b/block/curl.c @@ -572,12 +572,6 @@ static BlockDriverAIOCB *curl_aio_readv(BlockDriverState *bs, acb->nb_sectors = nb_sectors; acb->bh = qemu_bh_new(curl_readv_bh_cb, acb); - - if (!acb->bh) { - DPRINTF("CURL: qemu_bh_new failed\n"); - return NULL; - } - qemu_bh_schedule(acb->bh); return &acb->common; } @@ -572,7 +572,7 @@ fi : ${make=${MAKE-make}} : ${install=${INSTALL-install}} -: ${python=${PYTHON-python}} +: ${python=${PYTHON-python -B}} : ${smbd=${SMBD-/usr/sbin/smbd}} # Default objcc to clang if available, otherwise use CC @@ -1213,6 +1213,7 @@ gcc_flags="-Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers $gcc_ gcc_flags="-Wmissing-include-dirs -Wempty-body -Wnested-externs $gcc_flags" gcc_flags="-Wendif-labels $gcc_flags" gcc_flags="-Wno-initializer-overrides $gcc_flags" +gcc_flags="-Wno-string-plus-int $gcc_flags" # Note that we do not add -Werror to gcc_flags here, because that would # enable it for all configure tests. If a configure test failed due # to -Werror this would just silently disable some features, @@ -1357,7 +1358,7 @@ fi # Note that if the Python conditional here evaluates True we will exit # with status 1 which is a shell 'false' value. -if ! "$python" -c 'import sys; sys.exit(sys.version_info < (2,4) or sys.version_info >= (3,))'; then +if ! $python -c 'import sys; sys.exit(sys.version_info < (2,4) or sys.version_info >= (3,))'; then error_exit "Cannot use '$python', Python 2.4 or later is required." \ "Note that Python 3 or later is not yet supported." \ "Use --python=/path/to/python to specify a supported Python." @@ -1478,7 +1479,7 @@ libs_softmmu="$libs_softmmu -lz" # libseccomp check if test "$seccomp" != "no" ; then - if $pkg_config --atleast-version=2.1.0 libseccomp --modversion >/dev/null 2>&1; then + if $pkg_config --atleast-version=2.1.0 libseccomp; then libs_softmmu="$libs_softmmu `$pkg_config --libs libseccomp`" QEMU_CFLAGS="$QEMU_CFLAGS `$pkg_config --cflags libseccomp`" seccomp="yes" @@ -1712,10 +1713,10 @@ if test "$gtk" != "no"; then fi gtk="no" else - gtk_cflags=`$pkg_config --cflags $gtkpackage 2>/dev/null` - gtk_libs=`$pkg_config --libs $gtkpackage 2>/dev/null` - vte_cflags=`$pkg_config --cflags $vtepackage 2>/dev/null` - vte_libs=`$pkg_config --libs $vtepackage 2>/dev/null` + gtk_cflags=`$pkg_config --cflags $gtkpackage` + gtk_libs=`$pkg_config --libs $gtkpackage` + vte_cflags=`$pkg_config --cflags $vtepackage` + vte_libs=`$pkg_config --libs $vtepackage` libs_softmmu="$gtk_libs $vte_libs $libs_softmmu" gtk="yes" fi @@ -1730,7 +1731,7 @@ if test "`basename $sdl_config`" != sdl-config && ! has ${sdl_config}; then sdl_config=sdl-config fi -if $pkg_config sdl --modversion >/dev/null 2>&1; then +if $pkg_config sdl --exists; then sdlconfig="$pkg_config sdl" _sdlversion=`$sdlconfig --modversion 2>/dev/null | sed 's/[^0-9]//g'` elif has ${sdl_config}; then @@ -1916,9 +1917,9 @@ int main(void) { return png_ptr != 0; } EOF - if $pkg_config libpng --modversion >/dev/null 2>&1; then - vnc_png_cflags=`$pkg_config libpng --cflags 2> /dev/null` - vnc_png_libs=`$pkg_config libpng --libs 2> /dev/null` + if $pkg_config libpng --exists; then + vnc_png_cflags=`$pkg_config libpng --cflags` + vnc_png_libs=`$pkg_config libpng --libs` else vnc_png_cflags="" vnc_png_libs="-lpng" @@ -2195,7 +2196,7 @@ fi ########################################## # curl probe if test "$curl" != "no" ; then - if $pkg_config libcurl --modversion >/dev/null 2>&1; then + if $pkg_config libcurl --exists; then curlconfig="$pkg_config libcurl" else curlconfig=curl-config @@ -2247,10 +2248,9 @@ if test "$mingw32" = yes; then else glib_req_ver=2.12 fi -if $pkg_config --atleast-version=$glib_req_ver gthread-2.0 > /dev/null 2>&1 -then - glib_cflags=`$pkg_config --cflags gthread-2.0 2>/dev/null` - glib_libs=`$pkg_config --libs gthread-2.0 2>/dev/null` +if $pkg_config --atleast-version=$glib_req_ver gthread-2.0; then + glib_cflags=`$pkg_config --cflags gthread-2.0` + glib_libs=`$pkg_config --libs gthread-2.0` LIBS="$glib_libs $LIBS" libs_qga="$glib_libs $libs_qga" else @@ -2279,8 +2279,8 @@ if test "$pixman" = "none"; then pixman_cflags= pixman_libs= elif test "$pixman" = "system"; then - pixman_cflags=`$pkg_config --cflags pixman-1 2>/dev/null` - pixman_libs=`$pkg_config --libs pixman-1 2>/dev/null` + pixman_cflags=`$pkg_config --cflags pixman-1` + pixman_libs=`$pkg_config --libs pixman-1` else if test ! -d ${source_path}/pixman/pixman; then error_exit "pixman not present. Your options:" \ @@ -2379,8 +2379,7 @@ fi # libssh2 probe min_libssh2_version=1.2.8 if test "$libssh2" != "no" ; then - if $pkg_config --atleast-version=$min_libssh2_version libssh2 >/dev/null 2>&1 - then + if $pkg_config --atleast-version=$min_libssh2_version libssh2; then libssh2_cflags=`$pkg_config libssh2 --cflags` libssh2_libs=`$pkg_config libssh2 --libs` libssh2=yes @@ -2598,14 +2597,14 @@ fi ########################################## # glusterfs probe if test "$glusterfs" != "no" ; then - if $pkg_config --atleast-version=3 glusterfs-api >/dev/null 2>&1; then + if $pkg_config --atleast-version=3 glusterfs-api; then glusterfs="yes" - glusterfs_cflags=`$pkg_config --cflags glusterfs-api 2>/dev/null` - glusterfs_libs=`$pkg_config --libs glusterfs-api 2>/dev/null` + glusterfs_cflags=`$pkg_config --cflags glusterfs-api` + glusterfs_libs=`$pkg_config --libs glusterfs-api` CFLAGS="$CFLAGS $glusterfs_cflags" libs_tools="$glusterfs_libs $libs_tools" libs_softmmu="$glusterfs_libs $libs_softmmu" - if $pkg_config --atleast-version=5 glusterfs-api >/dev/null 2>&1; then + if $pkg_config --atleast-version=5 glusterfs-api; then glusterfs_discard="yes" fi else @@ -2968,10 +2967,10 @@ if test "$libiscsi" != "no" ; then #include <iscsi/iscsi.h> int main(void) { iscsi_unmap_sync(NULL,0,0,0,NULL,0); return 0; } EOF - if $pkg_config --atleast-version=1.7.0 libiscsi --modversion >/dev/null 2>&1; then + if $pkg_config --atleast-version=1.7.0 libiscsi; then libiscsi="yes" - libiscsi_cflags=$($pkg_config --cflags libiscsi 2>/dev/null) - libiscsi_libs=$($pkg_config --libs libiscsi 2>/dev/null) + libiscsi_cflags=$($pkg_config --cflags libiscsi) + libiscsi_libs=$($pkg_config --libs libiscsi) CFLAGS="$CFLAGS $libiscsi_cflags" LIBS="$LIBS $libiscsi_libs" elif compile_prog "" "-liscsi" ; then @@ -3038,8 +3037,8 @@ int main(void) { spice_server_new(); return 0; } EOF spice_cflags=$($pkg_config --cflags spice-protocol spice-server 2>/dev/null) spice_libs=$($pkg_config --libs spice-protocol spice-server 2>/dev/null) - if $pkg_config --atleast-version=0.12.0 spice-server >/dev/null 2>&1 && \ - $pkg_config --atleast-version=0.12.3 spice-protocol > /dev/null 2>&1 && \ + if $pkg_config --atleast-version=0.12.0 spice-server && \ + $pkg_config --atleast-version=0.12.3 spice-protocol && \ compile_prog "$spice_cflags" "$spice_libs" ; then spice="yes" libs_softmmu="$libs_softmmu $spice_libs" @@ -3074,7 +3073,7 @@ EOF test_cflags="-Werror $test_cflags" fi if test -n "$libtool" && - $pkg_config --atleast-version=3.12.8 nss >/dev/null 2>&1 && \ + $pkg_config --atleast-version=3.12.8 nss && \ compile_prog "$test_cflags" "$libcacard_libs"; then smartcard_nss="yes" QEMU_CFLAGS="$QEMU_CFLAGS $libcacard_cflags" @@ -3090,11 +3089,11 @@ fi # check for libusb if test "$libusb" != "no" ; then - if $pkg_config --atleast-version=1.0.13 libusb-1.0 >/dev/null 2>&1 ; then + if $pkg_config --atleast-version=1.0.13 libusb-1.0; then libusb="yes" usb="libusb" - libusb_cflags=$($pkg_config --cflags libusb-1.0 2>/dev/null) - libusb_libs=$($pkg_config --libs libusb-1.0 2>/dev/null) + libusb_cflags=$($pkg_config --cflags libusb-1.0) + libusb_libs=$($pkg_config --libs libusb-1.0) QEMU_CFLAGS="$QEMU_CFLAGS $libusb_cflags" libs_softmmu="$libs_softmmu $libusb_libs" else @@ -3107,10 +3106,10 @@ fi # check for usbredirparser for usb network redirection support if test "$usb_redir" != "no" ; then - if $pkg_config --atleast-version=0.6 libusbredirparser-0.5 >/dev/null 2>&1 ; then + if $pkg_config --atleast-version=0.6 libusbredirparser-0.5; then usb_redir="yes" - usb_redir_cflags=$($pkg_config --cflags libusbredirparser-0.5 2>/dev/null) - usb_redir_libs=$($pkg_config --libs libusbredirparser-0.5 2>/dev/null) + usb_redir_cflags=$($pkg_config --cflags libusbredirparser-0.5) + usb_redir_libs=$($pkg_config --libs libusbredirparser-0.5) QEMU_CFLAGS="$QEMU_CFLAGS $usb_redir_cflags" libs_softmmu="$libs_softmmu $usb_redir_libs" else diff --git a/hw/audio/adlib.c b/hw/audio/adlib.c index 0c792475d1..bd8e9d9815 100644 --- a/hw/audio/adlib.c +++ b/hw/audio/adlib.c @@ -284,9 +284,9 @@ static void Adlib_fini (AdlibState *s) } static MemoryRegionPortio adlib_portio_list[] = { - { 0x388, 4, 1, .read = adlib_read, .write = adlib_write, }, { 0, 4, 1, .read = adlib_read, .write = adlib_write, }, { 0, 2, 1, .read = adlib_read, .write = adlib_write, }, + { 0x388, 4, 1, .read = adlib_read, .write = adlib_write, }, PORTIO_END_OF_LIST(), }; diff --git a/hw/block/pflash_cfi02.c b/hw/block/pflash_cfi02.c index 99445b09b9..8d4b828edf 100644 --- a/hw/block/pflash_cfi02.c +++ b/hw/block/pflash_cfi02.c @@ -47,7 +47,7 @@ #ifdef PFLASH_DEBUG #define DPRINTF(fmt, ...) \ do { \ - fprintf(stderr "PFLASH: " fmt , ## __VA_ARGS__); \ + fprintf(stderr, "PFLASH: " fmt , ## __VA_ARGS__); \ } while (0) #else #define DPRINTF(fmt, ...) do { } while (0) diff --git a/hw/s390x/css.c b/hw/s390x/css.c index 93b0b9733b..101da63d04 100644 --- a/hw/s390x/css.c +++ b/hw/s390x/css.c @@ -124,7 +124,7 @@ static void sch_handle_clear_func(SubchDev *sch) /* Path management: In our simple css, we always choose the only path. */ path = 0x80; - /* Reset values prior to 'issueing the clear signal'. */ + /* Reset values prior to 'issuing the clear signal'. */ p->lpum = 0; p->pom = 0xff; s->flags &= ~SCSW_FLAGS_MASK_PNO; diff --git a/hw/timer/exynos4210_rtc.c b/hw/timer/exynos4210_rtc.c index 3f2c8c5578..026f81a2e3 100644 --- a/hw/timer/exynos4210_rtc.c +++ b/hw/timer/exynos4210_rtc.c @@ -67,7 +67,7 @@ #define CURTICNT 0x0090 #define TICK_TIMER_ENABLE 0x0100 -#define TICNT_THRESHHOLD 2 +#define TICNT_THRESHOLD 2 #define RTC_ENABLE 0x0001 @@ -429,7 +429,7 @@ static void exynos4210_rtc_write(void *opaque, hwaddr offset, s->reg_rtccon = value; break; case TICCNT: - if (value > TICNT_THRESHHOLD) { + if (value > TICNT_THRESHOLD) { s->reg_ticcnt = value; } else { fprintf(stderr, diff --git a/include/hw/bt.h b/include/hw/bt.h index 830af94735..3f365bcbcb 100644 --- a/include/hw/bt.h +++ b/include/hw/bt.h @@ -640,8 +640,8 @@ typedef struct { #define OCF_SETUP_SYNC_CONN 0x0028 typedef struct { uint16_t handle; - uint32_t tx_bandwith; - uint32_t rx_bandwith; + uint32_t tx_bandwidth; + uint32_t rx_bandwidth; uint16_t max_latency; uint16_t voice_setting; uint8_t retrans_effort; @@ -652,8 +652,8 @@ typedef struct { #define OCF_ACCEPT_SYNC_CONN_REQ 0x0029 typedef struct { bdaddr_t bdaddr; - uint32_t tx_bandwith; - uint32_t rx_bandwith; + uint32_t tx_bandwidth; + uint32_t rx_bandwidth; uint16_t max_latency; uint16_t voice_setting; uint8_t retrans_effort; diff --git a/libcacard/card_7816.c b/libcacard/card_7816.c index 8d06326da6..c28bb60fe6 100644 --- a/libcacard/card_7816.c +++ b/libcacard/card_7816.c @@ -232,7 +232,7 @@ vcard_apdu_set_class(VCardAPDU *apdu) { case 0xf0: default: apdu->a_gen_type = - (apdu->a_cla == 0xff) ? VCARD_7816_PTS : VCARD_7816_PROPIETARY; + (apdu->a_cla == 0xff) ? VCARD_7816_PTS : VCARD_7816_PROPRIETARY; break; } return VCARD7816_STATUS_SUCCESS; diff --git a/libcacard/card_7816t.h b/libcacard/card_7816t.h index 9333285d73..8eef0ce42c 100644 --- a/libcacard/card_7816t.h +++ b/libcacard/card_7816t.h @@ -43,7 +43,7 @@ typedef enum { VCARD_7816_ISO, VCARD_7816_RFU, VCARD_7816_PTS, - VCARD_7816_PROPIETARY + VCARD_7816_PROPRIETARY } VCardAPDUType; diff --git a/linux-headers/asm-powerpc/epapr_hcalls.h b/linux-headers/asm-powerpc/epapr_hcalls.h index 06f724786a..33b3f89f55 100644 --- a/linux-headers/asm-powerpc/epapr_hcalls.h +++ b/linux-headers/asm-powerpc/epapr_hcalls.h @@ -78,7 +78,7 @@ #define EV_SUCCESS 0 #define EV_EPERM 1 /* Operation not permitted */ #define EV_ENOENT 2 /* Entry Not Found */ -#define EV_EIO 3 /* I/O error occured */ +#define EV_EIO 3 /* I/O error occurred */ #define EV_EAGAIN 4 /* The operation had insufficient * resources to complete and should be * retried @@ -89,7 +89,7 @@ #define EV_ENODEV 7 /* No such device */ #define EV_EINVAL 8 /* An argument supplied to the hcall was out of range or invalid */ -#define EV_INTERNAL 9 /* An internal error occured */ +#define EV_INTERNAL 9 /* An internal error occurred */ #define EV_CONFIG 10 /* A configuration error was detected */ #define EV_INVALID_STATE 11 /* The object is in an invalid state */ #define EV_UNIMPLEMENTED 12 /* Unimplemented hypercall */ diff --git a/migration-rdma.c b/migration-rdma.c index 3d1266f40a..05a155b93d 100644 --- a/migration-rdma.c +++ b/migration-rdma.c @@ -756,7 +756,7 @@ static void qemu_rdma_dump_gid(const char *who, struct rdma_cm_id *id) * connections (both IPv4 and IPv6) if the destination machine does not have * a regular infiniband network available for use. * - * The only way to gaurantee that an error is thrown for broken kernels is + * The only way to guarantee that an error is thrown for broken kernels is * for the management software to choose a *specific* interface at bind time * and validate what time of hardware it is. * @@ -778,7 +778,7 @@ static void qemu_rdma_dump_gid(const char *who, struct rdma_cm_id *id) * Infiniband. * * If we detect that we have a *pure* RoCE environment, then we can safely - * thrown an error even if the management sofware has specified '[::]' as the + * thrown an error even if the management software has specified '[::]' as the * bind address. * * However, if there is are multiple hetergeneous devices, then we cannot make @@ -801,7 +801,7 @@ static int qemu_rdma_broken_ipv6_kernel(Error **errp, struct ibv_context *verbs) * devices (non-ethernet). * * If not, then we can safely proceed with the migration. - * Otherwise, there are no gaurantees until the bug is fixed in linux. + * Otherwise, there are no guarantees until the bug is fixed in linux. */ if (!verbs) { int num_devices, x; @@ -920,9 +920,11 @@ static int qemu_rdma_resolve_host(RDMAContext *rdma, Error **errp) ret = rdma_resolve_addr(rdma->cm_id, NULL, e->ai_dst_addr, RDMA_RESOLVE_TIMEOUT_MS); if (!ret) { - ret = qemu_rdma_broken_ipv6_kernel(errp, rdma->cm_id->verbs); - if (ret) { - continue; + if (e->ai_family == AF_INET6) { + ret = qemu_rdma_broken_ipv6_kernel(errp, rdma->cm_id->verbs); + if (ret) { + continue; + } } goto route; } diff --git a/qmp-commands.hx b/qmp-commands.hx index bb09e72712..8a8f342eab 100644 --- a/qmp-commands.hx +++ b/qmp-commands.hx @@ -1402,22 +1402,22 @@ Change I/O throttle limits for a block drive. Arguments: - "device": device name (json-string) -- "bps": total throughput limit in bytes per second(json-int) -- "bps_rd": read throughput limit in bytes per second(json-int) -- "bps_wr": read throughput limit in bytes per second(json-int) -- "iops": total I/O operations per second(json-int) -- "iops_rd": read I/O operations per second(json-int) -- "iops_wr": write I/O operations per second(json-int) +- "bps": total throughput limit in bytes per second (json-int) +- "bps_rd": read throughput limit in bytes per second (json-int) +- "bps_wr": write throughput limit in bytes per second (json-int) +- "iops": total I/O operations per second (json-int) +- "iops_rd": read I/O operations per second (json-int) +- "iops_wr": write I/O operations per second (json-int) Example: -> { "execute": "block_set_io_throttle", "arguments": { "device": "virtio0", - "bps": "1000000", - "bps_rd": "0", - "bps_wr": "0", - "iops": "0", - "iops_rd": "0", - "iops_wr": "0" } } + "bps": 1000000, + "bps_rd": 0, + "bps_wr": 0, + "iops": 0, + "iops_rd": 0, + "iops_wr": 0 } } <- { "return": {} } EQMP @@ -1791,7 +1791,7 @@ Each json-object contain the following: - "vm-state-size": size of the VM state in bytes (json-int) - "date-sec": UTC date of the snapshot in seconds (json-int) - "date-nsec": fractional part in nanoseconds to be used with - date-sec(json-int) + date-sec (json-int) - "vm-clock-sec": VM clock relative to boot in seconds (json-int) - "vm-clock-nsec": fractional part in nanoseconds to be used diff --git a/slirp/arp_table.c b/slirp/arp_table.c index bf698c1ac5..ecdb0baee4 100644 --- a/slirp/arp_table.c +++ b/slirp/arp_table.c @@ -38,7 +38,7 @@ void arp_table_add(Slirp *slirp, uint32_t ip_addr, uint8_t ethaddr[ETH_ALEN]) ethaddr[3], ethaddr[4], ethaddr[5])); /* Check 0.0.0.0/8 invalid source-only addresses */ - if ((ip_addr & htonl(~(0xf << 28))) == 0) { + if ((ip_addr & htonl(~(0xfU << 28))) == 0) { return; } @@ -74,7 +74,7 @@ bool arp_table_search(Slirp *slirp, uint32_t ip_addr, DEBUG_ARG("ip = 0x%x", ip_addr); /* Check 0.0.0.0/8 invalid source-only addresses */ - assert((ip_addr & htonl(~(0xf << 28))) != 0); + assert((ip_addr & htonl(~(0xfU << 28))) != 0); /* If broadcast address */ if (ip_addr == 0xffffffff || ip_addr == broadcast_addr) { diff --git a/slirp/socket.c b/slirp/socket.c index 8e8819cf30..25d60e7a89 100644 --- a/slirp/socket.c +++ b/slirp/socket.c @@ -627,7 +627,9 @@ tcp_listen(Slirp *slirp, uint32_t haddr, u_int hport, uint32_t laddr, addr.sin_port = hport; if (((s = qemu_socket(AF_INET,SOCK_STREAM,0)) < 0) || +#ifndef _WIN32 (qemu_setsockopt(s, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(int)) < 0) || +#endif (bind(s,(struct sockaddr *)&addr, sizeof(addr)) < 0) || (listen(s,1) < 0)) { int tmperrno = errno; /* Don't clobber the real reason we failed */ diff --git a/target-arm/translate.c b/target-arm/translate.c index 9160ced4fe..4f4a0a97d2 100644 --- a/target-arm/translate.c +++ b/target-arm/translate.c @@ -6715,6 +6715,7 @@ static void disas_arm_insn(CPUARMState * env, DisasContext *s) /* setend */ if (((insn >> 9) & 1) != s->bswap_code) { /* Dynamic endianness switching not implemented. */ + qemu_log_mask(LOG_UNIMP, "arm: unimplemented setend\n"); goto illegal_op; } return; @@ -8740,6 +8741,8 @@ static int disas_thumb2_insn(CPUARMState *env, DisasContext *s, uint16_t insn_hw if (insn & (1 << 26)) { /* Secure monitor call (v6Z) */ + qemu_log_mask(LOG_UNIMP, + "arm: unimplemented secure monitor call\n"); goto illegal_op; /* not implemented. */ } else { op = (insn >> 20) & 7; @@ -9779,6 +9782,7 @@ static void disas_thumb_insn(CPUARMState *env, DisasContext *s) ARCH(6); if (((insn >> 3) & 1) != s->bswap_code) { /* Dynamic endianness switching not implemented. */ + qemu_log_mask(LOG_UNIMP, "arm: unimplemented setend\n"); goto illegal_op; } break; diff --git a/tcg/tci/tcg-target.c b/tcg/tci/tcg-target.c index 281d7d50f3..233ab3bf35 100644 --- a/tcg/tci/tcg-target.c +++ b/tcg/tci/tcg-target.c @@ -415,13 +415,6 @@ static void tcg_out_i(TCGContext *s, tcg_target_ulong v) s->code_ptr += sizeof(tcg_target_ulong); } -/* Write 64 bit value. */ -static void tcg_out64(TCGContext *s, uint64_t v) -{ - *(uint64_t *)s->code_ptr = v; - s->code_ptr += sizeof(v); -} - /* Write opcode. */ static void tcg_out_op_t(TCGContext *s, TCGOpcode op) { diff --git a/tests/test-aio.c b/tests/test-aio.c index 07a1f61f87..532a1de3f9 100644 --- a/tests/test-aio.c +++ b/tests/test-aio.c @@ -396,7 +396,7 @@ static void test_timer_schedule(void) g_assert(!aio_poll(ctx, false)); g_assert_cmpint(data.n, ==, 0); - sleep(1); + g_usleep(1 * G_USEC_PER_SEC); g_assert_cmpint(data.n, ==, 0); g_assert(aio_poll(ctx, false)); @@ -729,7 +729,7 @@ static void test_source_timer_schedule(void) g_assert_cmpint(data.n, ==, 0); - sleep(1); + g_usleep(1 * G_USEC_PER_SEC); g_assert_cmpint(data.n, ==, 0); g_assert(g_main_context_iteration(NULL, false)); @@ -739,7 +739,7 @@ static void test_source_timer_schedule(void) do { g_assert(g_main_context_iteration(NULL, true)); } while (qemu_clock_get_ns(data.clock_type) <= expiry); - sleep(1); + g_usleep(1 * G_USEC_PER_SEC); g_main_context_iteration(NULL, false); g_assert_cmpint(data.n, ==, 2); |