diff options
| -rwxr-xr-x | configure | 185 |
1 files changed, 103 insertions, 82 deletions
@@ -575,7 +575,14 @@ fi else # if cross compiling, cannot launch a program, so make a static guess -if test "$cpu" = "powerpc" -o "$cpu" = "mips" -o "$cpu" = "mips64" -o "$cpu" = "s390" -o "$cpu" = "sparc" -o "$cpu" = "sparc64" -o "$cpu" = "m68k" -o "$cpu" = "armv4b"; then +if test "$cpu" = "armv4b" \ + -o "$cpu" = "m68k" \ + -o "$cpu" = "mips" \ + -o "$cpu" = "mips64" \ + -o "$cpu" = "powerpc" \ + -o "$cpu" = "s390" \ + -o "$cpu" = "sparc" \ + -o "$cpu" = "sparc64"; then bigendian="yes" fi @@ -583,7 +590,10 @@ fi # host long bits test hostlongbits="32" -if test "$cpu" = "sparc64" -o "$cpu" = "ia64" -o "$cpu" = "x86_64" -o "$cpu" = "alpha"; then +if test "$cpu" = "x86_64" \ + -o "$cpu" = "alpha" \ + -o "$cpu" = "ia64" \ + -o "$cpu" = "sparc64"; then hostlongbits="64" fi @@ -843,42 +853,42 @@ if test "$cpu" = "i386" ; then elif test "$cpu" = "x86_64" ; then echo "ARCH=x86_64" >> $config_mak echo "#define HOST_X86_64 1" >> $config_h +elif test "$cpu" = "alpha" ; then + echo "ARCH=alpha" >> $config_mak + echo "#define HOST_ALPHA 1" >> $config_h elif test "$cpu" = "armv4b" ; then echo "ARCH=arm" >> $config_mak echo "#define HOST_ARM 1" >> $config_h elif test "$cpu" = "armv4l" ; then echo "ARCH=arm" >> $config_mak echo "#define HOST_ARM 1" >> $config_h -elif test "$cpu" = "powerpc" ; then - echo "ARCH=ppc" >> $config_mak - echo "#define HOST_PPC 1" >> $config_h +elif test "$cpu" = "cris" ; then + echo "ARCH=cris" >> $config_mak + echo "#define HOST_CRIS 1" >> $config_h +elif test "$cpu" = "ia64" ; then + echo "ARCH=ia64" >> $config_mak + echo "#define HOST_IA64 1" >> $config_h +elif test "$cpu" = "m68k" ; then + echo "ARCH=m68k" >> $config_mak + echo "#define HOST_M68K 1" >> $config_h elif test "$cpu" = "mips" ; then echo "ARCH=mips" >> $config_mak echo "#define HOST_MIPS 1" >> $config_h elif test "$cpu" = "mips64" ; then echo "ARCH=mips64" >> $config_mak echo "#define HOST_MIPS64 1" >> $config_h -elif test "$cpu" = "cris" ; then - echo "ARCH=cris" >> $config_mak - echo "#define HOST_CRIS 1" >> $config_h +elif test "$cpu" = "powerpc" ; then + echo "ARCH=ppc" >> $config_mak + echo "#define HOST_PPC 1" >> $config_h elif test "$cpu" = "s390" ; then echo "ARCH=s390" >> $config_mak echo "#define HOST_S390 1" >> $config_h -elif test "$cpu" = "alpha" ; then - echo "ARCH=alpha" >> $config_mak - echo "#define HOST_ALPHA 1" >> $config_h elif test "$cpu" = "sparc" ; then echo "ARCH=sparc" >> $config_mak echo "#define HOST_SPARC 1" >> $config_h elif test "$cpu" = "sparc64" ; then echo "ARCH=sparc64" >> $config_mak echo "#define HOST_SPARC64 1" >> $config_h -elif test "$cpu" = "ia64" ; then - echo "ARCH=ia64" >> $config_mak - echo "#define HOST_IA64 1" >> $config_h -elif test "$cpu" = "m68k" ; then - echo "ARCH=m68k" >> $config_mak - echo "#define HOST_M68K 1" >> $config_h else echo "Unsupported CPU = $cpu" exit 1 @@ -1049,18 +1059,18 @@ config_h=$target_dir/config.h target_cpu=`echo $target | cut -d '-' -f 1` target_bigendian="no" [ "$target_cpu" = "armeb" ] && target_bigendian=yes -[ "$target_cpu" = "sparc" ] && target_bigendian=yes -[ "$target_cpu" = "sparc64" ] && target_bigendian=yes -[ "$target_cpu" = "sparc32plus" ] && target_bigendian=yes +[ "$target_cpu" = "m68k" ] && target_bigendian=yes +[ "$target_cpu" = "mips" ] && target_bigendian=yes +[ "$target_cpu" = "mipsn32" ] && target_bigendian=yes +[ "$target_cpu" = "mips64" ] && target_bigendian=yes [ "$target_cpu" = "ppc" ] && target_bigendian=yes [ "$target_cpu" = "ppcemb" ] && target_bigendian=yes [ "$target_cpu" = "ppc64" ] && target_bigendian=yes [ "$target_cpu" = "ppc64abi32" ] && target_bigendian=yes -[ "$target_cpu" = "mips" ] && target_bigendian=yes -[ "$target_cpu" = "mipsn32" ] && target_bigendian=yes -[ "$target_cpu" = "mips64" ] && target_bigendian=yes [ "$target_cpu" = "sh4eb" ] && target_bigendian=yes -[ "$target_cpu" = "m68k" ] && target_bigendian=yes +[ "$target_cpu" = "sparc" ] && target_bigendian=yes +[ "$target_cpu" = "sparc64" ] && target_bigendian=yes +[ "$target_cpu" = "sparc32plus" ] && target_bigendian=yes target_softmmu="no" target_user_only="no" target_linux_user="no" @@ -1129,6 +1139,18 @@ if test "$target_cpu" = "i386" ; then if test $kqemu = "yes" -a "$target_softmmu" = "yes" -a $cpu = "i386" ; then echo "#define USE_KQEMU 1" >> $config_h fi +elif test "$target_cpu" = "x86_64" ; then + echo "TARGET_ARCH=x86_64" >> $config_mak + echo "#define TARGET_ARCH \"x86_64\"" >> $config_h + echo "#define TARGET_I386 1" >> $config_h + echo "#define TARGET_X86_64 1" >> $config_h + if test $kqemu = "yes" -a "$target_softmmu" = "yes" -a $cpu = "x86_64" ; then + echo "#define USE_KQEMU 1" >> $config_h + fi +elif test "$target_cpu" = "alpha" ; then + echo "TARGET_ARCH=alpha" >> $config_mak + echo "#define TARGET_ARCH \"alpha\"" >> $config_h + echo "#define TARGET_ALPHA 1" >> $config_h elif test "$target_cpu" = "arm" -o "$target_cpu" = "armeb" ; then echo "TARGET_ARCH=arm" >> $config_mak echo "CONFIG_NO_DYNGEN_OP=yes" >> $config_mak @@ -1136,24 +1158,33 @@ elif test "$target_cpu" = "arm" -o "$target_cpu" = "armeb" ; then echo "#define TARGET_ARM 1" >> $config_h echo "#define CONFIG_NO_DYNGEN_OP 1" >> $config_h bflt="yes" -elif test "$target_cpu" = "sparc" ; then - echo "TARGET_ARCH=sparc" >> $config_mak - echo "#define TARGET_ARCH \"sparc\"" >> $config_h - echo "#define TARGET_SPARC 1" >> $config_h -elif test "$target_cpu" = "sparc64" ; then - echo "TARGET_ARCH=sparc64" >> $config_mak - echo "#define TARGET_ARCH \"sparc64\"" >> $config_h - echo "#define TARGET_SPARC 1" >> $config_h - echo "#define TARGET_SPARC64 1" >> $config_h - elfload32="yes" -elif test "$target_cpu" = "sparc32plus" ; then - echo "TARGET_ARCH=sparc64" >> $config_mak - echo "TARGET_ABI_DIR=sparc" >> $config_mak - echo "TARGET_ARCH2=sparc32plus" >> $config_mak - echo "#define TARGET_ARCH \"sparc64\"" >> $config_h - echo "#define TARGET_SPARC 1" >> $config_h - echo "#define TARGET_SPARC64 1" >> $config_h - echo "#define TARGET_ABI32 1" >> $config_h +elif test "$target_cpu" = "cris" ; then + echo "TARGET_ARCH=cris" >> $config_mak + echo "#define TARGET_ARCH \"cris\"" >> $config_h + echo "#define TARGET_CRIS 1" >> $config_h + echo "CONFIG_SOFTFLOAT=yes" >> $config_mak + echo "#define CONFIG_SOFTFLOAT 1" >> $config_h +elif test "$target_cpu" = "m68k" ; then + echo "TARGET_ARCH=m68k" >> $config_mak + echo "#define TARGET_ARCH \"m68k\"" >> $config_h + echo "#define TARGET_M68K 1" >> $config_h + bflt="yes" +elif test "$target_cpu" = "mips" -o "$target_cpu" = "mipsel" ; then + echo "TARGET_ARCH=mips" >> $config_mak + echo "#define TARGET_ARCH \"mips\"" >> $config_h + echo "#define TARGET_MIPS 1" >> $config_h + echo "#define TARGET_ABI_MIPSO32 1" >> $config_h +elif test "$target_cpu" = "mipsn32" -o "$target_cpu" = "mipsn32el" ; then + echo "TARGET_ARCH=mipsn32" >> $config_mak + echo "#define TARGET_ARCH \"mipsn32\"" >> $config_h + echo "#define TARGET_MIPS 1" >> $config_h + echo "#define TARGET_ABI_MIPSN32 1" >> $config_h +elif test "$target_cpu" = "mips64" -o "$target_cpu" = "mips64el" ; then + echo "TARGET_ARCH=mips64" >> $config_mak + echo "#define TARGET_ARCH \"mips64\"" >> $config_h + echo "#define TARGET_MIPS 1" >> $config_h + echo "#define TARGET_MIPS64 1" >> $config_h + echo "#define TARGET_ABI_MIPSN64 1" >> $config_h elif test "$target_cpu" = "ppc" ; then echo "TARGET_ARCH=ppc" >> $config_mak echo "#define TARGET_ARCH \"ppc\"" >> $config_h @@ -1178,50 +1209,29 @@ elif test "$target_cpu" = "ppc64abi32" ; then echo "#define TARGET_PPC 1" >> $config_h echo "#define TARGET_PPC64 1" >> $config_h echo "#define TARGET_ABI32 1" >> $config_h -elif test "$target_cpu" = "x86_64" ; then - echo "TARGET_ARCH=x86_64" >> $config_mak - echo "#define TARGET_ARCH \"x86_64\"" >> $config_h - echo "#define TARGET_I386 1" >> $config_h - echo "#define TARGET_X86_64 1" >> $config_h - if test $kqemu = "yes" -a "$target_softmmu" = "yes" -a $cpu = "x86_64" ; then - echo "#define USE_KQEMU 1" >> $config_h - fi -elif test "$target_cpu" = "mips" -o "$target_cpu" = "mipsel" ; then - echo "TARGET_ARCH=mips" >> $config_mak - echo "#define TARGET_ARCH \"mips\"" >> $config_h - echo "#define TARGET_MIPS 1" >> $config_h - echo "#define TARGET_ABI_MIPSO32 1" >> $config_h -elif test "$target_cpu" = "mipsn32" -o "$target_cpu" = "mipsn32el" ; then - echo "TARGET_ARCH=mipsn32" >> $config_mak - echo "#define TARGET_ARCH \"mipsn32\"" >> $config_h - echo "#define TARGET_MIPS 1" >> $config_h - echo "#define TARGET_ABI_MIPSN32 1" >> $config_h -elif test "$target_cpu" = "mips64" -o "$target_cpu" = "mips64el" ; then - echo "TARGET_ARCH=mips64" >> $config_mak - echo "#define TARGET_ARCH \"mips64\"" >> $config_h - echo "#define TARGET_MIPS 1" >> $config_h - echo "#define TARGET_MIPS64 1" >> $config_h - echo "#define TARGET_ABI_MIPSN64 1" >> $config_h -elif test "$target_cpu" = "cris" ; then - echo "TARGET_ARCH=cris" >> $config_mak - echo "#define TARGET_ARCH \"cris\"" >> $config_h - echo "#define TARGET_CRIS 1" >> $config_h - echo "CONFIG_SOFTFLOAT=yes" >> $config_mak - echo "#define CONFIG_SOFTFLOAT 1" >> $config_h elif test "$target_cpu" = "sh4" -o "$target_cpu" = "sh4eb" ; then echo "TARGET_ARCH=sh4" >> $config_mak echo "#define TARGET_ARCH \"sh4\"" >> $config_h echo "#define TARGET_SH4 1" >> $config_h bflt="yes" -elif test "$target_cpu" = "m68k" ; then - echo "TARGET_ARCH=m68k" >> $config_mak - echo "#define TARGET_ARCH \"m68k\"" >> $config_h - echo "#define TARGET_M68K 1" >> $config_h - bflt="yes" -elif test "$target_cpu" = "alpha" ; then - echo "TARGET_ARCH=alpha" >> $config_mak - echo "#define TARGET_ARCH \"alpha\"" >> $config_h - echo "#define TARGET_ALPHA 1" >> $config_h +elif test "$target_cpu" = "sparc" ; then + echo "TARGET_ARCH=sparc" >> $config_mak + echo "#define TARGET_ARCH \"sparc\"" >> $config_h + echo "#define TARGET_SPARC 1" >> $config_h +elif test "$target_cpu" = "sparc64" ; then + echo "TARGET_ARCH=sparc64" >> $config_mak + echo "#define TARGET_ARCH \"sparc64\"" >> $config_h + echo "#define TARGET_SPARC 1" >> $config_h + echo "#define TARGET_SPARC64 1" >> $config_h + elfload32="yes" +elif test "$target_cpu" = "sparc32plus" ; then + echo "TARGET_ARCH=sparc64" >> $config_mak + echo "TARGET_ABI_DIR=sparc" >> $config_mak + echo "TARGET_ARCH2=sparc32plus" >> $config_mak + echo "#define TARGET_ARCH \"sparc64\"" >> $config_h + echo "#define TARGET_SPARC 1" >> $config_h + echo "#define TARGET_SPARC64 1" >> $config_h + echo "#define TARGET_ABI32 1" >> $config_h else echo "Unsupported target CPU" exit 1 @@ -1247,7 +1257,18 @@ if test "$target_darwin_user" = "yes" ; then echo "#define CONFIG_DARWIN_USER 1" >> $config_h fi -if test "$target_cpu" = "arm" -o "$target_cpu" = "armeb" -o "$target_cpu" = "sparc" -o "$target_cpu" = "sparc64" -o "$target_cpu" = "sparc32plus" -o "$target_cpu" = "m68k" -o "$target_cpu" = "mips" -o "$target_cpu" = "mipsel" -o "$target_cpu" = "mipsn32" -o "$target_cpu" = "mipsn32el" -o "$target_cpu" = "mips64" -o "$target_cpu" = "mips64el"; then +if test "$target_cpu" = "arm" \ + -o "$target_cpu" = "armeb" \ + -o "$target_cpu" = "m68k" \ + -o "$target_cpu" = "mips" \ + -o "$target_cpu" = "mipsel" \ + -o "$target_cpu" = "mipsn32" \ + -o "$target_cpu" = "mipsn32el" \ + -o "$target_cpu" = "mips64" \ + -o "$target_cpu" = "mips64el" \ + -o "$target_cpu" = "sparc" \ + -o "$target_cpu" = "sparc64" \ + -o "$target_cpu" = "sparc32plus"; then echo "CONFIG_SOFTFLOAT=yes" >> $config_mak echo "#define CONFIG_SOFTFLOAT 1" >> $config_h fi |