diff options
| -rw-r--r-- | Makefile.objs | 1 | ||||
| -rw-r--r-- | hw/ide/ahci.c | 305 | ||||
| -rw-r--r-- | hw/ide/ahci.h | 309 | ||||
| -rw-r--r-- | hw/ide/ich.c | 61 |
4 files changed, 375 insertions, 301 deletions
diff --git a/Makefile.objs b/Makefile.objs index f1c7bfe4ea..353b1a8318 100644 --- a/Makefile.objs +++ b/Makefile.objs @@ -244,6 +244,7 @@ hw-obj-$(CONFIG_IDE_CMD646) += ide/cmd646.o hw-obj-$(CONFIG_IDE_MACIO) += ide/macio.o hw-obj-$(CONFIG_IDE_VIA) += ide/via.o hw-obj-$(CONFIG_AHCI) += ide/ahci.o +hw-obj-$(CONFIG_AHCI) += ide/ich.o # SCSI layer hw-obj-$(CONFIG_LSI_SCSI_PCI) += lsi53c895a.o diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c index 671b4df7f6..28412d09aa 100644 --- a/hw/ide/ahci.c +++ b/hw/ide/ahci.c @@ -72,6 +72,7 @@ #include "cpu-common.h" #include "internal.h" #include <hw/ide/pci.h> +#include <hw/ide/ahci.h> /* #define DEBUG_AHCI */ @@ -83,304 +84,6 @@ do { fprintf(stderr, "ahci: %s: [%d] ", __FUNCTION__, port); \ #define DPRINTF(port, fmt, ...) do {} while(0) #endif -#define AHCI_PCI_BAR 5 -#define AHCI_MAX_PORTS 32 -#define AHCI_MAX_SG 168 /* hardware max is 64K */ -#define AHCI_DMA_BOUNDARY 0xffffffff -#define AHCI_USE_CLUSTERING 0 -#define AHCI_MAX_CMDS 32 -#define AHCI_CMD_SZ 32 -#define AHCI_CMD_SLOT_SZ (AHCI_MAX_CMDS * AHCI_CMD_SZ) -#define AHCI_RX_FIS_SZ 256 -#define AHCI_CMD_TBL_CDB 0x40 -#define AHCI_CMD_TBL_HDR_SZ 0x80 -#define AHCI_CMD_TBL_SZ (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16)) -#define AHCI_CMD_TBL_AR_SZ (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS) -#define AHCI_PORT_PRIV_DMA_SZ (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \ - AHCI_RX_FIS_SZ) - -#define AHCI_IRQ_ON_SG (1 << 31) -#define AHCI_CMD_ATAPI (1 << 5) -#define AHCI_CMD_WRITE (1 << 6) -#define AHCI_CMD_PREFETCH (1 << 7) -#define AHCI_CMD_RESET (1 << 8) -#define AHCI_CMD_CLR_BUSY (1 << 10) - -#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */ -#define RX_FIS_SDB 0x58 /* offset of SDB FIS data */ -#define RX_FIS_UNK 0x60 /* offset of Unknown FIS data */ - -/* global controller registers */ -#define HOST_CAP 0x00 /* host capabilities */ -#define HOST_CTL 0x04 /* global host control */ -#define HOST_IRQ_STAT 0x08 /* interrupt status */ -#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */ -#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */ - -/* HOST_CTL bits */ -#define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */ -#define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */ -#define HOST_CTL_AHCI_EN (1 << 31) /* AHCI enabled */ - -/* HOST_CAP bits */ -#define HOST_CAP_SSC (1 << 14) /* Slumber capable */ -#define HOST_CAP_AHCI (1 << 18) /* AHCI only */ -#define HOST_CAP_CLO (1 << 24) /* Command List Override support */ -#define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */ -#define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */ -#define HOST_CAP_64 (1 << 31) /* PCI DAC (64-bit DMA) support */ - -/* registers for each SATA port */ -#define PORT_LST_ADDR 0x00 /* command list DMA addr */ -#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */ -#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */ -#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */ -#define PORT_IRQ_STAT 0x10 /* interrupt status */ -#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */ -#define PORT_CMD 0x18 /* port command */ -#define PORT_TFDATA 0x20 /* taskfile data */ -#define PORT_SIG 0x24 /* device TF signature */ -#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */ -#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */ -#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */ -#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */ -#define PORT_CMD_ISSUE 0x38 /* command issue */ -#define PORT_RESERVED 0x3c /* reserved */ - -/* PORT_IRQ_{STAT,MASK} bits */ -#define PORT_IRQ_COLD_PRES (1 << 31) /* cold presence detect */ -#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */ -#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */ -#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */ -#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */ -#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */ -#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */ -#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */ - -#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */ -#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */ -#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */ -#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */ -#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */ -#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */ -#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */ -#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */ -#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */ - -#define PORT_IRQ_FREEZE (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | \ - PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY | \ - PORT_IRQ_UNK_FIS) -#define PORT_IRQ_ERROR (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | \ - PORT_IRQ_HBUS_DATA_ERR) -#define DEF_PORT_IRQ (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | \ - PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | \ - PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS) - -/* PORT_CMD bits */ -#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */ -#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */ -#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */ -#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */ -#define PORT_CMD_CLO (1 << 3) /* Command list override */ -#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */ -#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */ -#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */ - -#define PORT_CMD_ICC_MASK (0xf << 28) /* i/f ICC state mask */ -#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */ -#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */ -#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */ - -#define PORT_IRQ_STAT_DHRS (1 << 0) /* Device to Host Register FIS */ -#define PORT_IRQ_STAT_PSS (1 << 1) /* PIO Setup FIS */ -#define PORT_IRQ_STAT_DSS (1 << 2) /* DMA Setup FIS */ -#define PORT_IRQ_STAT_SDBS (1 << 3) /* Set Device Bits */ -#define PORT_IRQ_STAT_UFS (1 << 4) /* Unknown FIS */ -#define PORT_IRQ_STAT_DPS (1 << 5) /* Descriptor Processed */ -#define PORT_IRQ_STAT_PCS (1 << 6) /* Port Connect Change Status */ -#define PORT_IRQ_STAT_DMPS (1 << 7) /* Device Mechanical Presence - Status */ -#define PORT_IRQ_STAT_PRCS (1 << 22) /* File Ready Status */ -#define PORT_IRQ_STAT_IPMS (1 << 23) /* Incorrect Port Multiplier - Status */ -#define PORT_IRQ_STAT_OFS (1 << 24) /* Overflow Status */ -#define PORT_IRQ_STAT_INFS (1 << 26) /* Interface Non-Fatal Error - Status */ -#define PORT_IRQ_STAT_IFS (1 << 27) /* Interface Fatal Error */ -#define PORT_IRQ_STAT_HBDS (1 << 28) /* Host Bus Data Error Status */ -#define PORT_IRQ_STAT_HBFS (1 << 29) /* Host Bus Fatal Error Status */ -#define PORT_IRQ_STAT_TFES (1 << 30) /* Task File Error Status */ -#define PORT_IRQ_STAT_CPDS (1 << 31) /* Code Port Detect Status */ - -/* ap->flags bits */ -#define AHCI_FLAG_NO_NCQ (1 << 24) -#define AHCI_FLAG_IGN_IRQ_IF_ERR (1 << 25) /* ignore IRQ_IF_ERR */ -#define AHCI_FLAG_HONOR_PI (1 << 26) /* honor PORTS_IMPL */ -#define AHCI_FLAG_IGN_SERR_INTERNAL (1 << 27) /* ignore SERR_INTERNAL */ -#define AHCI_FLAG_32BIT_ONLY (1 << 28) /* force 32bit */ - -#define ATA_SRST (1 << 2) /* software reset */ - -#define STATE_RUN 0 -#define STATE_RESET 1 - -#define SATA_SCR_SSTATUS_DET_NODEV 0x0 -#define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3 - -#define SATA_SCR_SSTATUS_SPD_NODEV 0x00 -#define SATA_SCR_SSTATUS_SPD_GEN1 0x10 - -#define SATA_SCR_SSTATUS_IPM_NODEV 0x000 -#define SATA_SCR_SSTATUS_IPM_ACTIVE 0X100 - -#define AHCI_SCR_SCTL_DET 0xf - -#define SATA_FIS_TYPE_REGISTER_H2D 0x27 -#define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80 - -#define AHCI_CMD_HDR_CMD_FIS_LEN 0x1f -#define AHCI_CMD_HDR_PRDT_LEN 16 - -#define SATA_SIGNATURE_CDROM 0xeb140000 -#define SATA_SIGNATURE_DISK 0x00000101 - -#define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20 - /* Shouldn't this be 0x2c? */ - -#define SATA_PORTS 4 - -#define AHCI_PORT_REGS_START_ADDR 0x100 -#define AHCI_PORT_REGS_END_ADDR (AHCI_PORT_REGS_START_ADDR + SATA_PORTS * 0x80) -#define AHCI_PORT_ADDR_OFFSET_MASK 0x7f - -#define AHCI_NUM_COMMAND_SLOTS 31 -#define AHCI_SUPPORTED_SPEED 20 -#define AHCI_SUPPORTED_SPEED_GEN1 1 -#define AHCI_VERSION_1_0 0x10000 - -#define AHCI_PROGMODE_MAJOR_REV_1 1 - -#define AHCI_COMMAND_TABLE_ACMD 0x40 - -#define IDE_FEATURE_DMA 1 - -#define READ_FPDMA_QUEUED 0x60 -#define WRITE_FPDMA_QUEUED 0x61 - -#define RES_FIS_DSFIS 0x00 -#define RES_FIS_PSFIS 0x20 -#define RES_FIS_RFIS 0x40 -#define RES_FIS_SDBFIS 0x58 -#define RES_FIS_UFIS 0x60 - -typedef struct AHCIControlRegs { - uint32_t cap; - uint32_t ghc; - uint32_t irqstatus; - uint32_t impl; - uint32_t version; -} AHCIControlRegs; - -typedef struct AHCIPortRegs { - uint32_t lst_addr; - uint32_t lst_addr_hi; - uint32_t fis_addr; - uint32_t fis_addr_hi; - uint32_t irq_stat; - uint32_t irq_mask; - uint32_t cmd; - uint32_t unused0; - uint32_t tfdata; - uint32_t sig; - uint32_t scr_stat; - uint32_t scr_ctl; - uint32_t scr_err; - uint32_t scr_act; - uint32_t cmd_issue; - uint32_t reserved; -} AHCIPortRegs; - -typedef struct AHCICmdHdr { - uint32_t opts; - uint32_t status; - uint64_t tbl_addr; - uint32_t reserved[4]; -} __attribute__ ((packed)) AHCICmdHdr; - -typedef struct AHCI_SG { - uint64_t addr; - uint32_t reserved; - uint32_t flags_size; -} __attribute__ ((packed)) AHCI_SG; - -typedef struct AHCIDevice AHCIDevice; - -typedef struct NCQTransferState { - AHCIDevice *drive; - BlockDriverAIOCB *aiocb; - QEMUSGList sglist; - int is_read; - uint16_t sector_count; - uint64_t lba; - uint8_t tag; - int slot; - int used; -} NCQTransferState; - -struct AHCIDevice { - IDEDMA dma; - IDEBus port; - int port_no; - uint32_t port_state; - uint32_t finished; - AHCIPortRegs port_regs; - struct AHCIState *hba; - QEMUBH *check_bh; - uint8_t *lst; - uint8_t *res_fis; - int dma_status; - int done_atapi_packet; - int busy_slot; - BlockDriverCompletionFunc *dma_cb; - AHCICmdHdr *cur_cmd; - NCQTransferState ncq_tfs[AHCI_MAX_CMDS]; -}; - -typedef struct AHCIState { - AHCIDevice dev[SATA_PORTS]; - AHCIControlRegs control_regs; - int mem; - qemu_irq irq; -} AHCIState; - -typedef struct AHCIPCIState { - PCIDevice card; - AHCIState ahci; -} AHCIPCIState; - -typedef struct NCQFrame { - uint8_t fis_type; - uint8_t c; - uint8_t command; - uint8_t sector_count_low; - uint8_t lba0; - uint8_t lba1; - uint8_t lba2; - uint8_t fua; - uint8_t lba3; - uint8_t lba4; - uint8_t lba5; - uint8_t sector_count_high; - uint8_t tag; - uint8_t reserved5; - uint8_t reserved6; - uint8_t control; - uint8_t reserved7; - uint8_t reserved8; - uint8_t reserved9; - uint8_t reserved10; -} __attribute__ ((packed)) NCQFrame; - static void check_cmd(AHCIState *s, int port); static int handle_cmd(AHCIState *s,int port,int slot); static void ahci_reset_port(AHCIState *s, int port); @@ -1410,7 +1113,7 @@ static const IDEDMAOps ahci_dma_ops = { .reset = ahci_dma_reset, }; -static void ahci_init(AHCIState *s, DeviceState *qdev) +void ahci_init(AHCIState *s, DeviceState *qdev) { qemu_irq *irqs; int i; @@ -1434,7 +1137,7 @@ static void ahci_init(AHCIState *s, DeviceState *qdev) } } -static void ahci_pci_map(PCIDevice *pci_dev, int region_num, +void ahci_pci_map(PCIDevice *pci_dev, int region_num, pcibus_t addr, pcibus_t size, int type) { struct AHCIPCIState *d = (struct AHCIPCIState *)pci_dev; @@ -1443,7 +1146,7 @@ static void ahci_pci_map(PCIDevice *pci_dev, int region_num, cpu_register_physical_memory(addr, size, s->mem); } -static void ahci_reset(void *opaque) +void ahci_reset(void *opaque) { struct AHCIPCIState *d = opaque; int i; diff --git a/hw/ide/ahci.h b/hw/ide/ahci.h new file mode 100644 index 0000000000..63ef7855c6 --- /dev/null +++ b/hw/ide/ahci.h @@ -0,0 +1,309 @@ +#ifndef HW_IDE_AHCI_H +#define HW_IDE_AHCI_H + +#define AHCI_PCI_BAR 5 +#define AHCI_MAX_PORTS 32 +#define AHCI_MAX_SG 168 /* hardware max is 64K */ +#define AHCI_DMA_BOUNDARY 0xffffffff +#define AHCI_USE_CLUSTERING 0 +#define AHCI_MAX_CMDS 32 +#define AHCI_CMD_SZ 32 +#define AHCI_CMD_SLOT_SZ (AHCI_MAX_CMDS * AHCI_CMD_SZ) +#define AHCI_RX_FIS_SZ 256 +#define AHCI_CMD_TBL_CDB 0x40 +#define AHCI_CMD_TBL_HDR_SZ 0x80 +#define AHCI_CMD_TBL_SZ (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16)) +#define AHCI_CMD_TBL_AR_SZ (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS) +#define AHCI_PORT_PRIV_DMA_SZ (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \ + AHCI_RX_FIS_SZ) + +#define AHCI_IRQ_ON_SG (1 << 31) +#define AHCI_CMD_ATAPI (1 << 5) +#define AHCI_CMD_WRITE (1 << 6) +#define AHCI_CMD_PREFETCH (1 << 7) +#define AHCI_CMD_RESET (1 << 8) +#define AHCI_CMD_CLR_BUSY (1 << 10) + +#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */ +#define RX_FIS_SDB 0x58 /* offset of SDB FIS data */ +#define RX_FIS_UNK 0x60 /* offset of Unknown FIS data */ + +/* global controller registers */ +#define HOST_CAP 0x00 /* host capabilities */ +#define HOST_CTL 0x04 /* global host control */ +#define HOST_IRQ_STAT 0x08 /* interrupt status */ +#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */ +#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */ + +/* HOST_CTL bits */ +#define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */ +#define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */ +#define HOST_CTL_AHCI_EN (1 << 31) /* AHCI enabled */ + +/* HOST_CAP bits */ +#define HOST_CAP_SSC (1 << 14) /* Slumber capable */ +#define HOST_CAP_AHCI (1 << 18) /* AHCI only */ +#define HOST_CAP_CLO (1 << 24) /* Command List Override support */ +#define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */ +#define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */ +#define HOST_CAP_64 (1 << 31) /* PCI DAC (64-bit DMA) support */ + +/* registers for each SATA port */ +#define PORT_LST_ADDR 0x00 /* command list DMA addr */ +#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */ +#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */ +#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */ +#define PORT_IRQ_STAT 0x10 /* interrupt status */ +#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */ +#define PORT_CMD 0x18 /* port command */ +#define PORT_TFDATA 0x20 /* taskfile data */ +#define PORT_SIG 0x24 /* device TF signature */ +#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */ +#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */ +#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */ +#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */ +#define PORT_CMD_ISSUE 0x38 /* command issue */ +#define PORT_RESERVED 0x3c /* reserved */ + +/* PORT_IRQ_{STAT,MASK} bits */ +#define PORT_IRQ_COLD_PRES (1 << 31) /* cold presence detect */ +#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */ +#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */ +#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */ +#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */ +#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */ +#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */ +#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */ + +#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */ +#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */ +#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */ +#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */ +#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */ +#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */ +#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */ +#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */ +#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */ + +#define PORT_IRQ_FREEZE (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | \ + PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY | \ + PORT_IRQ_UNK_FIS) +#define PORT_IRQ_ERROR (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | \ + PORT_IRQ_HBUS_DATA_ERR) +#define DEF_PORT_IRQ (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | \ + PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | \ + PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS) + +/* PORT_CMD bits */ +#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */ +#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */ +#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */ +#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */ +#define PORT_CMD_CLO (1 << 3) /* Command list override */ +#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */ +#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */ +#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */ + +#define PORT_CMD_ICC_MASK (0xf << 28) /* i/f ICC state mask */ +#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */ +#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */ +#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */ + +#define PORT_IRQ_STAT_DHRS (1 << 0) /* Device to Host Register FIS */ +#define PORT_IRQ_STAT_PSS (1 << 1) /* PIO Setup FIS */ +#define PORT_IRQ_STAT_DSS (1 << 2) /* DMA Setup FIS */ +#define PORT_IRQ_STAT_SDBS (1 << 3) /* Set Device Bits */ +#define PORT_IRQ_STAT_UFS (1 << 4) /* Unknown FIS */ +#define PORT_IRQ_STAT_DPS (1 << 5) /* Descriptor Processed */ +#define PORT_IRQ_STAT_PCS (1 << 6) /* Port Connect Change Status */ +#define PORT_IRQ_STAT_DMPS (1 << 7) /* Device Mechanical Presence + Status */ +#define PORT_IRQ_STAT_PRCS (1 << 22) /* File Ready Status */ +#define PORT_IRQ_STAT_IPMS (1 << 23) /* Incorrect Port Multiplier + Status */ +#define PORT_IRQ_STAT_OFS (1 << 24) /* Overflow Status */ +#define PORT_IRQ_STAT_INFS (1 << 26) /* Interface Non-Fatal Error + Status */ +#define PORT_IRQ_STAT_IFS (1 << 27) /* Interface Fatal Error */ +#define PORT_IRQ_STAT_HBDS (1 << 28) /* Host Bus Data Error Status */ +#define PORT_IRQ_STAT_HBFS (1 << 29) /* Host Bus Fatal Error Status */ +#define PORT_IRQ_STAT_TFES (1 << 30) /* Task File Error Status */ +#define PORT_IRQ_STAT_CPDS (1 << 31) /* Code Port Detect Status */ + +/* ap->flags bits */ +#define AHCI_FLAG_NO_NCQ (1 << 24) +#define AHCI_FLAG_IGN_IRQ_IF_ERR (1 << 25) /* ignore IRQ_IF_ERR */ +#define AHCI_FLAG_HONOR_PI (1 << 26) /* honor PORTS_IMPL */ +#define AHCI_FLAG_IGN_SERR_INTERNAL (1 << 27) /* ignore SERR_INTERNAL */ +#define AHCI_FLAG_32BIT_ONLY (1 << 28) /* force 32bit */ + +#define ATA_SRST (1 << 2) /* software reset */ + +#define STATE_RUN 0 +#define STATE_RESET 1 + +#define SATA_SCR_SSTATUS_DET_NODEV 0x0 +#define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3 + +#define SATA_SCR_SSTATUS_SPD_NODEV 0x00 +#define SATA_SCR_SSTATUS_SPD_GEN1 0x10 + +#define SATA_SCR_SSTATUS_IPM_NODEV 0x000 +#define SATA_SCR_SSTATUS_IPM_ACTIVE 0X100 + +#define AHCI_SCR_SCTL_DET 0xf + +#define SATA_FIS_TYPE_REGISTER_H2D 0x27 +#define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80 + +#define AHCI_CMD_HDR_CMD_FIS_LEN 0x1f +#define AHCI_CMD_HDR_PRDT_LEN 16 + +#define SATA_SIGNATURE_CDROM 0xeb140000 +#define SATA_SIGNATURE_DISK 0x00000101 + +#define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20 + /* Shouldn't this be 0x2c? */ + +#define SATA_PORTS 4 + +#define AHCI_PORT_REGS_START_ADDR 0x100 +#define AHCI_PORT_REGS_END_ADDR (AHCI_PORT_REGS_START_ADDR + SATA_PORTS * 0x80) +#define AHCI_PORT_ADDR_OFFSET_MASK 0x7f + +#define AHCI_NUM_COMMAND_SLOTS 31 +#define AHCI_SUPPORTED_SPEED 20 +#define AHCI_SUPPORTED_SPEED_GEN1 1 +#define AHCI_VERSION_1_0 0x10000 + +#define AHCI_PROGMODE_MAJOR_REV_1 1 + +#define AHCI_COMMAND_TABLE_ACMD 0x40 + +#define IDE_FEATURE_DMA 1 + +#define READ_FPDMA_QUEUED 0x60 +#define WRITE_FPDMA_QUEUED 0x61 + +#define RES_FIS_DSFIS 0x00 +#define RES_FIS_PSFIS 0x20 +#define RES_FIS_RFIS 0x40 +#define RES_FIS_SDBFIS 0x58 +#define RES_FIS_UFIS 0x60 + +typedef struct AHCIControlRegs { + uint32_t cap; + uint32_t ghc; + uint32_t irqstatus; + uint32_t impl; + uint32_t version; +} AHCIControlRegs; + +typedef struct AHCIPortRegs { + uint32_t lst_addr; + uint32_t lst_addr_hi; + uint32_t fis_addr; + uint32_t fis_addr_hi; + uint32_t irq_stat; + uint32_t irq_mask; + uint32_t cmd; + uint32_t unused0; + uint32_t tfdata; + uint32_t sig; + uint32_t scr_stat; + uint32_t scr_ctl; + uint32_t scr_err; + uint32_t scr_act; + uint32_t cmd_issue; + uint32_t reserved; +} AHCIPortRegs; + +typedef struct AHCICmdHdr { + uint32_t opts; + uint32_t status; + uint64_t tbl_addr; + uint32_t reserved[4]; +} __attribute__ ((packed)) AHCICmdHdr; + +typedef struct AHCI_SG { + uint64_t addr; + uint32_t reserved; + uint32_t flags_size; +} __attribute__ ((packed)) AHCI_SG; + +typedef struct AHCIDevice AHCIDevice; + +typedef struct NCQTransferState { + AHCIDevice *drive; + BlockDriverAIOCB *aiocb; + QEMUSGList sglist; + int is_read; + uint16_t sector_count; + uint64_t lba; + uint8_t tag; + int slot; + int used; +} NCQTransferState; + +struct AHCIDevice { + IDEDMA dma; + IDEBus port; + int port_no; + uint32_t port_state; + uint32_t finished; + AHCIPortRegs port_regs; + struct AHCIState *hba; + QEMUBH *check_bh; + uint8_t *lst; + uint8_t *res_fis; + int dma_status; + int done_atapi_packet; + int busy_slot; + BlockDriverCompletionFunc *dma_cb; + AHCICmdHdr *cur_cmd; + NCQTransferState ncq_tfs[AHCI_MAX_CMDS]; +}; + +typedef struct AHCIState { + AHCIDevice dev[SATA_PORTS]; + AHCIControlRegs control_regs; + int mem; + qemu_irq irq; +} AHCIState; + +typedef struct AHCIPCIState { + PCIDevice card; + AHCIState ahci; +} AHCIPCIState; + +typedef struct NCQFrame { + uint8_t fis_type; + uint8_t c; + uint8_t command; + uint8_t sector_count_low; + uint8_t lba0; + uint8_t lba1; + uint8_t lba2; + uint8_t fua; + uint8_t lba3; + uint8_t lba4; + uint8_t lba5; + uint8_t sector_count_high; + uint8_t tag; + uint8_t reserved5; + uint8_t reserved6; + uint8_t control; + uint8_t reserved7; + uint8_t reserved8; + uint8_t reserved9; + uint8_t reserved10; +} __attribute__ ((packed)) NCQFrame; + +void ahci_init(AHCIState *s, DeviceState *qdev); + +void ahci_pci_map(PCIDevice *pci_dev, int region_num, + pcibus_t addr, pcibus_t size, int type); + +void ahci_reset(void *opaque); + +#endif /* HW_IDE_AHCI_H */ diff --git a/hw/ide/ich.c b/hw/ide/ich.c new file mode 100644 index 0000000000..9868b73592 --- /dev/null +++ b/hw/ide/ich.c @@ -0,0 +1,61 @@ +#include <hw/hw.h> +#include <hw/msi.h> +#include <hw/pc.h> +#include <hw/pci.h> +#include <hw/isa.h> +#include "block.h" +#include "block_int.h" +#include "sysemu.h" +#include "dma.h" + +#include <hw/ide/pci.h> +#include <hw/ide/ahci.h> + +static int pci_ich9_ahci_initfn(PCIDevice *dev) +{ + struct AHCIPCIState *d; + d = DO_UPCAST(struct AHCIPCIState, card, dev); + + pci_config_set_vendor_id(d->card.config, PCI_VENDOR_ID_INTEL); + pci_config_set_device_id(d->card.config, PCI_DEVICE_ID_INTEL_82801IR); + + pci_config_set_class(d->card.config, PCI_CLASS_STORAGE_SATA); + pci_config_set_revision(d->card.config, 0x02); + pci_config_set_prog_interface(d->card.config, AHCI_PROGMODE_MAJOR_REV_1); + + d->card.config[PCI_CACHE_LINE_SIZE] = 0x08; /* Cache line size */ + d->card.config[PCI_LATENCY_TIMER] = 0x00; /* Latency timer */ + pci_config_set_interrupt_pin(d->card.config, 1); + + /* XXX Software should program this register */ + d->card.config[0x90] = 1 << 6; /* Address Map Register - AHCI mode */ + + qemu_register_reset(ahci_reset, d); + + /* XXX BAR size should be 1k, but that breaks, so bump it to 4k for now */ + pci_register_bar(&d->card, 5, 0x1000, PCI_BASE_ADDRESS_SPACE_MEMORY, + ahci_pci_map); + + msi_init(dev, 0x50, 1, true, false); + + ahci_init(&d->ahci, &dev->qdev); + d->ahci.irq = d->card.irq[0]; + + return 0; +} + +static PCIDeviceInfo ich_ahci_info[] = { + { + .qdev.name = "ich9-ahci", + .qdev.size = sizeof(AHCIPCIState), + .init = pci_ich9_ahci_initfn, + },{ + /* end of list */ + } +}; + +static void ich_ahci_register(void) +{ + pci_qdev_register_many(ich_ahci_info); +} +device_init(ich_ahci_register); |