diff options
| -rw-r--r-- | Makefile | 1 | ||||
| -rw-r--r-- | Makefile.objs | 22 | ||||
| -rw-r--r-- | Makefile.target | 8 | ||||
| -rwxr-xr-x | configure | 27 | ||||
| -rw-r--r-- | docs/tracing.txt | 73 | ||||
| -rw-r--r-- | hmp-commands.hx | 11 | ||||
| -rw-r--r-- | monitor.c | 26 | ||||
| -rw-r--r-- | qemu-config.c | 7 | ||||
| -rw-r--r-- | qemu-options.hx | 27 | ||||
| -rwxr-xr-x | scripts/simpletrace.py | 4 | ||||
| -rwxr-xr-x | scripts/tracetool | 116 | ||||
| -rw-r--r-- | tests/test_path.c | 2 | ||||
| -rw-r--r-- | trace-events | 651 | ||||
| -rw-r--r-- | trace/control.c | 42 | ||||
| -rw-r--r-- | trace/control.h | 41 | ||||
| -rw-r--r-- | trace/default.c | 41 | ||||
| -rw-r--r-- | trace/simple.c (renamed from simpletrace.c) | 27 | ||||
| -rw-r--r-- | trace/simple.h (renamed from simpletrace.h) | 16 | ||||
| -rw-r--r-- | trace/stderr.c | 37 | ||||
| -rw-r--r-- | trace/stderr.h | 11 | ||||
| -rw-r--r-- | vl.c | 19 |
21 files changed, 719 insertions, 490 deletions
@@ -209,6 +209,7 @@ clean: rm -Rf .libs rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d net/*.o net/*.d fsdev/*.o fsdev/*.d ui/*.o ui/*.d qapi/*.o qapi/*.d qga/*.o qga/*.d rm -f qemu-img-cmds.h + rm -f trace/*.o trace/*.d rm -f trace.c trace.h trace.c-timestamp trace.h-timestamp rm -f trace-dtrace.dtrace trace-dtrace.dtrace-timestamp rm -f trace-dtrace.h trace-dtrace.h-timestamp diff --git a/Makefile.objs b/Makefile.objs index d1f3e5dae5..26b885bfeb 100644 --- a/Makefile.objs +++ b/Makefile.objs @@ -372,18 +372,24 @@ trace-dtrace.lo: trace-dtrace.dtrace $(call quiet-command,$(LIBTOOL) --mode=compile --tag=CC dtrace -o $@ -G -s $<, " lt GEN trace-dtrace.o") endif -simpletrace.o: simpletrace.c $(GENERATED_HEADERS) +trace/simple.o: trace/simple.c $(GENERATED_HEADERS) -ifeq ($(TRACE_BACKEND),dtrace) -trace-obj-y = trace-dtrace.o -else +trace-obj-$(CONFIG_TRACE_DTRACE) += trace-dtrace.o +ifneq ($(TRACE_BACKEND),dtrace) trace-obj-y = trace.o -ifeq ($(TRACE_BACKEND),simple) -trace-obj-y += simpletrace.o -user-obj-y += qemu-timer-common.o -endif endif +trace-nested-$(CONFIG_TRACE_DEFAULT) += default.o + +trace-nested-$(CONFIG_TRACE_SIMPLE) += simple.o +trace-obj-$(CONFIG_TRACE_SIMPLE) += qemu-timer-common.o + +trace-nested-$(CONFIG_TRACE_STDERR) += stderr.o + +trace-nested-y += control.o + +trace-obj-y += $(addprefix trace/, $(trace-nested-y)) + ###################################################################### # smartcard diff --git a/Makefile.target b/Makefile.target index 07af4d47c7..25c16d7f16 100644 --- a/Makefile.target +++ b/Makefile.target @@ -44,7 +44,7 @@ endif config-target.h: config-target.h-timestamp config-target.h-timestamp: config-target.mak -ifdef CONFIG_SYSTEMTAP_TRACE +ifdef CONFIG_TRACE_SYSTEMTAP stap: $(QEMU_PROG).stp ifdef CONFIG_USER_ONLY @@ -398,7 +398,7 @@ obj-y += $(addprefix ../, $(trace-obj-y)) obj-$(CONFIG_GDBSTUB_XML) += gdbstub-xml.o $(QEMU_PROG): $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y) - $(call LINK,$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y)) + $(call LINK,$^) gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/scripts/feature_to_c.sh @@ -414,7 +414,7 @@ clean: rm -f *.o *.a *~ $(PROGS) nwfpe/*.o fpu/*.o rm -f *.d */*.d tcg/*.o ide/*.o 9pfs/*.o rm -f hmp-commands.h qmp-commands.h gdbstub-xml.c -ifdef CONFIG_SYSTEMTAP_TRACE +ifdef CONFIG_TRACE_SYSTEMTAP rm -f *.stp endif @@ -425,7 +425,7 @@ ifneq ($(STRIP),) $(STRIP) $(patsubst %,"$(DESTDIR)$(bindir)/%",$(PROGS)) endif endif -ifdef CONFIG_SYSTEMTAP_TRACE +ifdef CONFIG_TRACE_SYSTEMTAP $(INSTALL_DIR) "$(DESTDIR)$(datadir)/../systemtap/tapset" $(INSTALL_DATA) $(QEMU_PROG).stp "$(DESTDIR)$(datadir)/../systemtap/tapset" endif @@ -3064,18 +3064,35 @@ bsd) ;; esac +# use default implementation for tracing backend-specific routines +trace_default=yes echo "TRACE_BACKEND=$trace_backend" >> $config_host_mak -if test "$trace_backend" = "simple"; then - echo "CONFIG_SIMPLE_TRACE=y" >> $config_host_mak +if test "$trace_backend" = "nop"; then + echo "CONFIG_TRACE_NOP=y" >> $config_host_mak fi -# Set the appropriate trace file. if test "$trace_backend" = "simple"; then + echo "CONFIG_TRACE_SIMPLE=y" >> $config_host_mak + trace_default=no + # Set the appropriate trace file. trace_file="\"$trace_file-\" FMT_pid" fi -if test "$trace_backend" = "dtrace" -a "$trace_backend_stap" = "yes" ; then - echo "CONFIG_SYSTEMTAP_TRACE=y" >> $config_host_mak +if test "$trace_backend" = "stderr"; then + echo "CONFIG_TRACE_STDERR=y" >> $config_host_mak + trace_default=no +fi +if test "$trace_backend" = "ust"; then + echo "CONFIG_TRACE_UST=y" >> $config_host_mak +fi +if test "$trace_backend" = "dtrace"; then + echo "CONFIG_TRACE_DTRACE=y" >> $config_host_mak + if test "$trace_backend_stap" = "yes" ; then + echo "CONFIG_TRACE_SYSTEMTAP=y" >> $config_host_mak + fi fi echo "CONFIG_TRACE_FILE=$trace_file" >> $config_host_mak +if test "$trace_default" = "yes"; then + echo "CONFIG_TRACE_DEFAULT=y" >> $config_host_mak +fi echo "TOOLS=$tools" >> $config_host_mak echo "ROMS=$roms" >> $config_host_mak diff --git a/docs/tracing.txt b/docs/tracing.txt index c99a0f27cf..4b27ab0c2a 100644 --- a/docs/tracing.txt +++ b/docs/tracing.txt @@ -12,13 +12,14 @@ for debugging, profiling, and observing execution. ./configure --trace-backend=simple make -2. Enable trace events you are interested in: +2. Create a file with the events you want to trace: - $EDITOR trace-events # remove "disable" from events you want + echo bdrv_aio_readv > /tmp/events + echo bdrv_aio_writev >> /tmp/events 3. Run the virtual machine to produce a trace file: - qemu ... # your normal QEMU invocation + qemu -trace events=/tmp/events ... # your normal QEMU invocation 4. Pretty-print the binary trace file: @@ -38,7 +39,7 @@ generate code for the trace events. Trace events are invoked directly from source code like this: #include "trace.h" /* needed for trace event prototype */ - + void *qemu_malloc(size_t size) { void *ptr; @@ -103,10 +104,45 @@ portability macros, ensure they are preceded and followed by double quotes: 4. Name trace events after their function. If there are multiple trace events in one function, append a unique distinguisher at the end of the name. -5. Declare trace events with the "disable" keyword. Some trace events can - produce a lot of output and users are typically only interested in a subset - of trace events. Marking trace events disabled by default saves the user - from having to manually disable noisy trace events. +5. If specific trace events are going to be called a huge number of times, this + might have a noticeable performance impact even when the trace events are + programmatically disabled. In this case you should declare the trace event + with the "disable" property, which will effectively disable it at compile + time (using the "nop" backend). + +== Generic interface and monitor commands == + +You can programmatically query and control the dynamic state of trace events +through a backend-agnostic interface: + +* trace_print_events + +* trace_event_set_state + Enables or disables trace events at runtime inside QEMU. + The function returns "true" if the state of the event has been successfully + changed, or "false" otherwise: + + #include "trace/control.h" + + trace_event_set_state("virtio_irq", true); /* enable */ + [...] + trace_event_set_state("virtio_irq", false); /* disable */ + +Note that some of the backends do not provide an implementation for this +interface, in which case QEMU will just print a warning. + +This functionality is also provided through monitor commands: + +* info trace-events + View available trace events and their state. State 1 means enabled, state 0 + means disabled. + +* trace-event NAME on|off + Enable/disable a given trace event. + +The "-trace events=<file>" command line argument can be used to enable the +events listed in <file> from the very beginning of the program. This file must +contain one event name per line. == Trace backends == @@ -131,6 +167,9 @@ The "nop" backend generates empty trace event functions so that the compiler can optimize out trace events completely. This is the default and imposes no performance penalty. +Note that regardless of the selected trace backend, events with the "disable" +property will be generated with the "nop" backend. + === Stderr === The "stderr" backend sends trace events directly to standard error. This @@ -157,27 +196,9 @@ unless you have specific needs for more advanced backends. flushed and emptied. This means the 'info trace' will display few or no entries if the buffer has just been flushed. -* info trace-events - View available trace events and their state. State 1 means enabled, state 0 - means disabled. - -* trace-event NAME on|off - Enable/disable a given trace event. - * trace-file on|off|flush|set <path> Enable/disable/flush the trace file or set the trace file name. -==== Enabling/disabling trace events programmatically ==== - -The st_change_trace_event_state() function can be used to enable or disable trace -events at runtime inside QEMU: - - #include "trace.h" - - st_change_trace_event_state("virtio_irq", true); /* enable */ - [...] - st_change_trace_event_state("virtio_irq", false); /* disable */ - ==== Analyzing trace files ==== The "simple" backend produces binary trace files that can be formatted with the diff --git a/hmp-commands.hx b/hmp-commands.hx index 0ccfb2867f..9e1cca8e3d 100644 --- a/hmp-commands.hx +++ b/hmp-commands.hx @@ -180,13 +180,12 @@ STEXI Output logs to @var{filename}. ETEXI -#ifdef CONFIG_SIMPLE_TRACE { .name = "trace-event", .args_type = "name:s,option:b", .params = "name on|off", .help = "changes status of a specific trace event", - .mhandler.cmd = do_change_trace_event_state, + .mhandler.cmd = do_trace_event_set_state, }, STEXI @@ -195,6 +194,7 @@ STEXI changes status of a trace event ETEXI +#if defined(CONFIG_SIMPLE_TRACE) { .name = "trace-file", .args_type = "op:s?,arg:F?", @@ -1354,14 +1354,17 @@ show roms @end table ETEXI -#ifdef CONFIG_SIMPLE_TRACE +#ifdef CONFIG_TRACE_SIMPLE STEXI @item info trace show contents of trace buffer +ETEXI +#endif + +STEXI @item info trace-events show available trace events and their state ETEXI -#endif STEXI @end table @@ -57,9 +57,11 @@ #include "json-parser.h" #include "osdep.h" #include "cpu.h" -#ifdef CONFIG_SIMPLE_TRACE -#include "trace.h" +#include "trace/control.h" +#ifdef CONFIG_TRACE_SIMPLE +#include "trace/simple.h" #endif +#include "trace/control.h" #include "ui/qemu-spice.h" //#define DEBUG @@ -592,18 +594,18 @@ static void do_help_cmd(Monitor *mon, const QDict *qdict) help_cmd(mon, qdict_get_try_str(qdict, "name")); } -#ifdef CONFIG_SIMPLE_TRACE -static void do_change_trace_event_state(Monitor *mon, const QDict *qdict) +static void do_trace_event_set_state(Monitor *mon, const QDict *qdict) { const char *tp_name = qdict_get_str(qdict, "name"); bool new_state = qdict_get_bool(qdict, "option"); - int ret = st_change_trace_event_state(tp_name, new_state); + int ret = trace_event_set_state(tp_name, new_state); if (!ret) { monitor_printf(mon, "unknown event name \"%s\"\n", tp_name); } } +#ifdef CONFIG_SIMPLE_TRACE static void do_trace_file(Monitor *mon, const QDict *qdict) { const char *op = qdict_get_try_str(qdict, "op"); @@ -996,17 +998,17 @@ static void do_info_cpu_stats(Monitor *mon) } #endif -#if defined(CONFIG_SIMPLE_TRACE) +#if defined(CONFIG_TRACE_SIMPLE) static void do_info_trace(Monitor *mon) { st_print_trace((FILE *)mon, &monitor_fprintf); } +#endif -static void do_info_trace_events(Monitor *mon) +static void do_trace_print_events(Monitor *mon) { - st_print_trace_events((FILE *)mon, &monitor_fprintf); + trace_print_events((FILE *)mon, &monitor_fprintf); } -#endif /** * do_quit(): Quit QEMU execution @@ -3135,7 +3137,7 @@ static const mon_cmd_t info_cmds[] = { .help = "show roms", .mhandler.info = do_info_roms, }, -#if defined(CONFIG_SIMPLE_TRACE) +#if defined(CONFIG_TRACE_SIMPLE) { .name = "trace", .args_type = "", @@ -3143,14 +3145,14 @@ static const mon_cmd_t info_cmds[] = { .help = "show current contents of trace buffer", .mhandler.info = do_info_trace, }, +#endif { .name = "trace-events", .args_type = "", .params = "", .help = "show available trace-events & their state", - .mhandler.info = do_info_trace_events, + .mhandler.info = do_trace_print_events, }, -#endif { .name = NULL, }, diff --git a/qemu-config.c b/qemu-config.c index 139e07768b..7a7854fd06 100644 --- a/qemu-config.c +++ b/qemu-config.c @@ -303,20 +303,21 @@ static QemuOptsList qemu_mon_opts = { }, }; -#ifdef CONFIG_SIMPLE_TRACE static QemuOptsList qemu_trace_opts = { .name = "trace", .implied_opt_name = "trace", .head = QTAILQ_HEAD_INITIALIZER(qemu_trace_opts.head), .desc = { { + .name = "events", + .type = QEMU_OPT_STRING, + },{ .name = "file", .type = QEMU_OPT_STRING, }, { /* end of list */ } }, }; -#endif static QemuOptsList qemu_cpudef_opts = { .name = "cpudef", @@ -517,9 +518,7 @@ static QemuOptsList *vm_config_groups[32] = { &qemu_global_opts, &qemu_mon_opts, &qemu_cpudef_opts, -#ifdef CONFIG_SIMPLE_TRACE &qemu_trace_opts, -#endif &qemu_option_rom_opts, &qemu_machine_opts, &qemu_boot_opts, diff --git a/qemu-options.hx b/qemu-options.hx index 35d95d1d89..f672365e42 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -2436,17 +2436,32 @@ Normally QEMU loads a configuration file from @var{sysconfdir}/qemu.conf and @var{sysconfdir}/target-@var{ARCH}.conf on startup. The @code{-nodefconfig} option will prevent QEMU from loading these configuration files at startup. ETEXI -#ifdef CONFIG_SIMPLE_TRACE DEF("trace", HAS_ARG, QEMU_OPTION_trace, - "-trace\n" - " Specify a trace file to log traces to\n", + "-trace [events=<file>][,file=<file>]\n" + " specify tracing options\n", QEMU_ARCH_ALL) STEXI -@item -trace +HXCOMM This line is not accurate, as some sub-options are backend-specific but +HXCOMM HX does not support conditional compilation of text. +@item -trace [events=@var{file}][,file=@var{file}] @findex -trace -Specify a trace file to log output traces to. + +Specify tracing options. + +@table @option +@item events=@var{file} +Immediately enable events listed in @var{file}. +The file must contain one event name (as listed in the @var{trace-events} file) +per line. + +This option is only available when using the @var{simple} and @var{stderr} +tracing backends. +@item file=@var{file} +Log output traces to @var{file}. + +This option is only available when using the @var{simple} tracing backend. +@end table ETEXI -#endif HXCOMM This is the last statement. Insert new options before this line! STEXI diff --git a/scripts/simpletrace.py b/scripts/simpletrace.py index 2ad56998ee..f55e5e63f9 100755 --- a/scripts/simpletrace.py +++ b/scripts/simpletrace.py @@ -102,10 +102,10 @@ def process(events, log, analyzer): fn_argcount = len(inspect.getargspec(fn)[0]) - 1 if fn_argcount == event_argcount + 1: # Include timestamp as first argument - return lambda _, rec: fn(*rec[1:2 + fn_argcount]) + return lambda _, rec: fn(*rec[1:2 + event_argcount]) else: # Just arguments, no timestamp - return lambda _, rec: fn(*rec[2:2 + fn_argcount]) + return lambda _, rec: fn(*rec[2:2 + event_argcount]) analyzer.begin() fn_cache = {} diff --git a/scripts/tracetool b/scripts/tracetool index 2155a57df2..743d246289 100755 --- a/scripts/tracetool +++ b/scripts/tracetool @@ -43,7 +43,26 @@ EOF # Get the name of a trace event get_name() { - echo ${1%%\(*} + local name + name=${1%%\(*} + echo "${name##* }" +} + +# Get the given property of a trace event +# 1: trace-events line +# 2: property name +# -> return 0 if property is present, or 1 otherwise +has_property() +{ + local props prop + props=${1%%\(*} + props=${props% *} + for prop in $props; do + if [ "$prop" = "$2" ]; then + return 0 + fi + done + return 1 } # Get the argument list of a trace event, including types and names @@ -101,20 +120,6 @@ get_fmt() echo "$fmt" } -# Get the state of a trace event -get_state() -{ - local str disable state - str=$(get_name "$1") - disable=${str##disable } - if [ "$disable" = "$str" ] ; then - state=1 - else - state=0 - fi - echo "$state" -} - linetoh_begin_nop() { return @@ -158,7 +163,7 @@ linetoc_end_nop() linetoh_begin_simple() { cat <<EOF -#include "simpletrace.h" +#include "trace/simple.h" EOF simple_event_num=0 @@ -174,14 +179,10 @@ cast_args_to_uint64_t() linetoh_simple() { - local name args argc trace_args state + local name args argc trace_args name=$(get_name "$1") args=$(get_args "$1") argc=$(get_argc "$1") - state=$(get_state "$1") - if [ "$state" = "0" ]; then - name=${name##disable } - fi trace_args="$simple_event_num" if [ "$argc" -gt 0 ] @@ -220,14 +221,10 @@ EOF linetoc_simple() { - local name state + local name name=$(get_name "$1") - state=$(get_state "$1") - if [ "$state" = "0" ] ; then - name=${name##disable } - fi cat <<EOF -{.tp_name = "$name", .state=$state}, +{.tp_name = "$name", .state=0}, EOF simple_event_num=$((simple_event_num + 1)) } @@ -244,7 +241,12 @@ linetoh_begin_stderr() { cat <<EOF #include <stdio.h> +#include "trace/stderr.h" + +extern TraceEvent trace_list[]; EOF + + stderr_event_num=0 } linetoh_stderr() @@ -263,29 +265,47 @@ linetoh_stderr() cat <<EOF static inline void trace_$name($args) { - fprintf(stderr, "$name $fmt\n" $argnames); + if (trace_list[$stderr_event_num].state != 0) { + fprintf(stderr, "$name $fmt\n" $argnames); + } } EOF + stderr_event_num=$((stderr_event_num + 1)) + } linetoh_end_stderr() { -return + cat <<EOF +#define NR_TRACE_EVENTS $stderr_event_num +EOF } linetoc_begin_stderr() { -return + cat <<EOF +#include "trace.h" + +TraceEvent trace_list[] = { +EOF + stderr_event_num=0 } linetoc_stderr() { -return + local name + name=$(get_name "$1") + cat <<EOF +{.tp_name = "$name", .state=0}, +EOF + stderr_event_num=$(($stderr_event_num + 1)) } linetoc_end_stderr() { -return + cat <<EOF +}; +EOF } #END OF STDERR @@ -379,14 +399,10 @@ EOF linetoh_dtrace() { - local name args argnames state nameupper + local name args argnames nameupper name=$(get_name "$1") args=$(get_args "$1") argnames=$(get_argnames "$1", ",") - state=$(get_state "$1") - if [ "$state" = "0" ] ; then - name=${name##disable } - fi nameupper=`echo $name | tr '[:lower:]' '[:upper:]'` @@ -430,13 +446,9 @@ EOF linetod_dtrace() { - local name args state + local name args name=$(get_name "$1") args=$(get_args "$1") - state=$(get_state "$1") - if [ "$state" = "0" ] ; then - name=${name##disable } - fi # DTrace provider syntax expects foo() for empty # params, not foo(void) @@ -464,14 +476,10 @@ linetostap_begin_dtrace() linetostap_dtrace() { - local i arg name args arglist state + local i arg name args arglist name=$(get_name "$1") args=$(get_args "$1") arglist=$(get_argnames "$1", "") - state=$(get_state "$1") - if [ "$state" = "0" ] ; then - name=${name##disable } - fi # Define prototype for probe arguments cat <<EOF @@ -516,18 +524,10 @@ convert() # Skip comments and empty lines test -z "${str%%#*}" && continue - # Process the line. The nop backend handles disabled lines. - disable=${str%%disable *} echo - if test -z "$disable"; then - # Pass the disabled state as an arg for the simple - # or DTrace backends which handle it dynamically. - # For all other backends, call lineto$1_nop() - if [ $backend = "simple" -o "$backend" = "dtrace" ]; then - "$process_line" "$str" - else - "lineto$1_nop" "${str##disable }" - fi + # Process the line. The nop backend handles disabled lines. + if has_property "$str" "disable"; then + "lineto$1_nop" "$str" else "$process_line" "$str" fi diff --git a/tests/test_path.c b/tests/test_path.c index 234ed97088..7265a9445d 100644 --- a/tests/test_path.c +++ b/tests/test_path.c @@ -4,7 +4,7 @@ #include "../cutils.c" #include "../path.c" #include "../trace.c" -#ifdef CONFIG_SIMPLE_TRACE +#ifdef CONFIG_TRACE_SIMPLE #include "../simpletrace.c" #endif diff --git a/trace-events b/trace-events index f08d6d0b41..98f3ec2841 100644 --- a/trace-events +++ b/trace-events @@ -17,9 +17,6 @@ # Example: qemu_malloc(size_t size) "size %zu" # # The "disable" keyword will build without the trace event. -# In case of 'simple' trace backend, it will allow the trace event to be -# compiled, but this would be turned off by default. It can be toggled on via -# the monitor. # # The <name> must be a valid as a C function name. # @@ -29,439 +26,439 @@ # The <format-string> should be a sprintf()-compatible format string. # qemu-malloc.c -disable qemu_malloc(size_t size, void *ptr) "size %zu ptr %p" -disable qemu_realloc(void *ptr, size_t size, void *newptr) "ptr %p size %zu newptr %p" -disable qemu_free(void *ptr) "ptr %p" +qemu_malloc(size_t size, void *ptr) "size %zu ptr %p" +qemu_realloc(void *ptr, size_t size, void *newptr) "ptr %p size %zu newptr %p" +qemu_free(void *ptr) "ptr %p" # osdep.c -disable qemu_memalign(size_t alignment, size_t size, void *ptr) "alignment %zu size %zu ptr %p" -disable qemu_vmalloc(size_t size, void *ptr) "size %zu ptr %p" -disable qemu_vfree(void *ptr) "ptr %p" +qemu_memalign(size_t alignment, size_t size, void *ptr) "alignment %zu size %zu ptr %p" +qemu_vmalloc(size_t size, void *ptr) "size %zu ptr %p" +qemu_vfree(void *ptr) "ptr %p" # hw/virtio.c -disable virtqueue_fill(void *vq, const void *elem, unsigned int len, unsigned int idx) "vq %p elem %p len %u idx %u" -disable virtqueue_flush(void *vq, unsigned int count) "vq %p count %u" -disable virtqueue_pop(void *vq, void *elem, unsigned int in_num, unsigned int out_num) "vq %p elem %p in_num %u out_num %u" -disable virtio_queue_notify(void *vdev, int n, void *vq) "vdev %p n %d vq %p" -disable virtio_irq(void *vq) "vq %p" -disable virtio_notify(void *vdev, void *vq) "vdev %p vq %p" +virtqueue_fill(void *vq, const void *elem, unsigned int len, unsigned int idx) "vq %p elem %p len %u idx %u" +virtqueue_flush(void *vq, unsigned int count) "vq %p count %u" +virtqueue_pop(void *vq, void *elem, unsigned int in_num, unsigned int out_num) "vq %p elem %p in_num %u out_num %u" +virtio_queue_notify(void *vdev, int n, void *vq) "vdev %p n %d vq %p" +virtio_irq(void *vq) "vq %p" +virtio_notify(void *vdev, void *vq) "vdev %p vq %p" # hw/virtio-serial-bus.c -disable virtio_serial_send_control_event(unsigned int port, uint16_t event, uint16_t value) "port %u, event %u, value %u" -disable virtio_serial_throttle_port(unsigned int port, bool throttle) "port %u, throttle %d" -disable virtio_serial_handle_control_message(uint16_t event, uint16_t value) "event %u, value %u" -disable virtio_serial_handle_control_message_port(unsigned int port) "port %u" +virtio_serial_send_control_event(unsigned int port, uint16_t event, uint16_t value) "port %u, event %u, value %u" +virtio_serial_throttle_port(unsigned int port, bool throttle) "port %u, throttle %d" +virtio_serial_handle_control_message(uint16_t event, uint16_t value) "event %u, value %u" +virtio_serial_handle_control_message_port(unsigned int port) "port %u" # hw/virtio-console.c -disable virtio_console_flush_buf(unsigned int port, size_t len, ssize_t ret) "port %u, in_len %zu, out_len %zd" -disable virtio_console_chr_read(unsigned int port, int size) "port %u, size %d" -disable virtio_console_chr_event(unsigned int port, int event) "port %u, event %d" +virtio_console_flush_buf(unsigned int port, size_t len, ssize_t ret) "port %u, in_len %zu, out_len %zd" +virtio_console_chr_read(unsigned int port, int size) "port %u, size %d" +virtio_console_chr_event(unsigned int port, int event) "port %u, event %d" # block.c -disable multiwrite_cb(void *mcb, int ret) "mcb %p ret %d" -disable bdrv_aio_multiwrite(void *mcb, int num_callbacks, int num_reqs) "mcb %p num_callbacks %d num_reqs %d" -disable bdrv_aio_multiwrite_earlyfail(void *mcb) "mcb %p" -disable bdrv_aio_multiwrite_latefail(void *mcb, int i) "mcb %p i %d" -disable bdrv_aio_flush(void *bs, void *opaque) "bs %p opaque %p" -disable bdrv_aio_readv(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %p sector_num %"PRId64" nb_sectors %d opaque %p" -disable bdrv_aio_writev(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %p sector_num %"PRId64" nb_sectors %d opaque %p" -disable bdrv_set_locked(void *bs, int locked) "bs %p locked %d" -disable bdrv_co_readv(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d" -disable bdrv_co_writev(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d" -disable bdrv_co_io(int is_write, void *acb) "is_write %d acb %p" +multiwrite_cb(void *mcb, int ret) "mcb %p ret %d" +bdrv_aio_multiwrite(void *mcb, int num_callbacks, int num_reqs) "mcb %p num_callbacks %d num_reqs %d" +bdrv_aio_multiwrite_earlyfail(void *mcb) "mcb %p" +bdrv_aio_multiwrite_latefail(void *mcb, int i) "mcb %p i %d" +bdrv_aio_flush(void *bs, void *opaque) "bs %p opaque %p" +bdrv_aio_readv(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %p sector_num %"PRId64" nb_sectors %d opaque %p" +bdrv_aio_writev(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %p sector_num %"PRId64" nb_sectors %d opaque %p" +bdrv_set_locked(void *bs, int locked) "bs %p locked %d" +bdrv_co_readv(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d" +bdrv_co_writev(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d" +bdrv_co_io(int is_write, void *acb) "is_write %d acb %p" # hw/virtio-blk.c -disable virtio_blk_req_complete(void *req, int status) "req %p status %d" -disable virtio_blk_rw_complete(void *req, int ret) "req %p ret %d" -disable virtio_blk_handle_write(void *req, uint64_t sector, size_t nsectors) "req %p sector %"PRIu64" nsectors %zu" +virtio_blk_req_complete(void *req, int status) "req %p status %d" +virtio_blk_rw_complete(void *req, int ret) "req %p ret %d" +virtio_blk_handle_write(void *req, uint64_t sector, size_t nsectors) "req %p sector %"PRIu64" nsectors %zu" # posix-aio-compat.c -disable paio_submit(void *acb, void *opaque, int64_t sector_num, int nb_sectors, int type) "acb %p opaque %p sector_num %"PRId64" nb_sectors %d type %d" -disable paio_complete(void *acb, void *opaque, int ret) "acb %p opaque %p ret %d" -disable paio_cancel(void *acb, void *opaque) "acb %p opaque %p" +paio_submit(void *acb, void *opaque, int64_t sector_num, int nb_sectors, int type) "acb %p opaque %p sector_num %"PRId64" nb_sectors %d type %d" +paio_complete(void *acb, void *opaque, int ret) "acb %p opaque %p ret %d" +paio_cancel(void *acb, void *opaque) "acb %p opaque %p" # ioport.c -disable cpu_in(unsigned int addr, unsigned int val) "addr %#x value %u" -disable cpu_out(unsigned int addr, unsigned int val) "addr %#x value %u" +cpu_in(unsigned int addr, unsigned int val) "addr %#x value %u" +cpu_out(unsigned int addr, unsigned int val) "addr %#x value %u" # balloon.c # Since requests are raised via monitor, not many tracepoints are needed. -disable balloon_event(void *opaque, unsigned long addr) "opaque %p addr %lu" +balloon_event(void *opaque, unsigned long addr) "opaque %p addr %lu" # hw/apic.c -disable apic_local_deliver(int vector, uint32_t lvt) "vector %d delivery mode %d" -disable apic_deliver_irq(uint8_t dest, uint8_t dest_mode, uint8_t delivery_mode, uint8_t vector_num, uint8_t trigger_mode) "dest %d dest_mode %d delivery_mode %d vector %d trigger_mode %d" -disable cpu_set_apic_base(uint64_t val) "%016"PRIx64"" -disable cpu_get_apic_base(uint64_t val) "%016"PRIx64"" -disable apic_mem_readl(uint64_t addr, uint32_t val) "%"PRIx64" = %08x" -disable apic_mem_writel(uint64_t addr, uint32_t val) "%"PRIx64" = %08x" +apic_local_deliver(int vector, uint32_t lvt) "vector %d delivery mode %d" +apic_deliver_irq(uint8_t dest, uint8_t dest_mode, uint8_t delivery_mode, uint8_t vector_num, uint8_t trigger_mode) "dest %d dest_mode %d delivery_mode %d vector %d trigger_mode %d" +cpu_set_apic_base(uint64_t val) "%016"PRIx64"" +cpu_get_apic_base(uint64_t val) "%016"PRIx64"" +apic_mem_readl(uint64_t addr, uint32_t val) "%"PRIx64" = %08x" +apic_mem_writel(uint64_t addr, uint32_t val) "%"PRIx64" = %08x" # coalescing -disable apic_reset_irq_delivered(int apic_irq_delivered) "old coalescing %d" -disable apic_get_irq_delivered(int apic_irq_delivered) "returning coalescing %d" -disable apic_set_irq(int apic_irq_delivered) "coalescing %d" +apic_reset_irq_delivered(int apic_irq_delivered) "old coalescing %d" +apic_get_irq_delivered(int apic_irq_delivered) "returning coalescing %d" +apic_set_irq(int apic_irq_delivered) "coalescing %d" # hw/cs4231.c -disable cs4231_mem_readl_dreg(uint32_t reg, uint32_t ret) "read dreg %d: 0x%02x" -disable cs4231_mem_readl_reg(uint32_t reg, uint32_t ret) "read reg %d: 0x%08x" -disable cs4231_mem_writel_reg(uint32_t reg, uint32_t old, uint32_t val) "write reg %d: 0x%08x -> 0x%08x" -disable cs4231_mem_writel_dreg(uint32_t reg, uint32_t old, uint32_t val) "write dreg %d: 0x%02x -> 0x%02x" +cs4231_mem_readl_dreg(uint32_t reg, uint32_t ret) "read dreg %d: 0x%02x" +cs4231_mem_readl_reg(uint32_t reg, uint32_t ret) "read reg %d: 0x%08x" +cs4231_mem_writel_reg(uint32_t reg, uint32_t old, uint32_t val) "write reg %d: 0x%08x -> 0x%08x" +cs4231_mem_writel_dreg(uint32_t reg, uint32_t old, uint32_t val) "write dreg %d: 0x%02x -> 0x%02x" # hw/ds1225y.c -disable nvram_read(uint32_t addr, uint32_t ret) "read addr %d: 0x%02x" -disable nvram_write(uint32_t addr, uint32_t old, uint32_t val) "write addr %d: 0x%02x -> 0x%02x" +nvram_read(uint32_t addr, uint32_t ret) "read addr %d: 0x%02x" +nvram_write(uint32_t addr, uint32_t old, uint32_t val) "write addr %d: 0x%02x -> 0x%02x" # hw/eccmemctl.c -disable ecc_mem_writel_mer(uint32_t val) "Write memory enable %08x" -disable ecc_mem_writel_mdr(uint32_t val) "Write memory delay %08x" -disable ecc_mem_writel_mfsr(uint32_t val) "Write memory fault status %08x" -disable ecc_mem_writel_vcr(uint32_t val) "Write slot configuration %08x" -disable ecc_mem_writel_dr(uint32_t val) "Write diagnostic %08x" -disable ecc_mem_writel_ecr0(uint32_t val) "Write event count 1 %08x" -disable ecc_mem_writel_ecr1(uint32_t val) "Write event count 2 %08x" -disable ecc_mem_readl_mer(uint32_t ret) "Read memory enable %08x" -disable ecc_mem_readl_mdr(uint32_t ret) "Read memory delay %08x" -disable ecc_mem_readl_mfsr(uint32_t ret) "Read memory fault status %08x" -disable ecc_mem_readl_vcr(uint32_t ret) "Read slot configuration %08x" -disable ecc_mem_readl_mfar0(uint32_t ret) "Read memory fault address 0 %08x" -disable ecc_mem_readl_mfar1(uint32_t ret) "Read memory fault address 1 %08x" -disable ecc_mem_readl_dr(uint32_t ret) "Read diagnostic %08x" -disable ecc_mem_readl_ecr0(uint32_t ret) "Read event count 1 %08x" -disable ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 %08x" -disable ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = %02x" -disable ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= %02x" +ecc_mem_writel_mer(uint32_t val) "Write memory enable %08x" +ecc_mem_writel_mdr(uint32_t val) "Write memory delay %08x" +ecc_mem_writel_mfsr(uint32_t val) "Write memory fault status %08x" +ecc_mem_writel_vcr(uint32_t val) "Write slot configuration %08x" +ecc_mem_writel_dr(uint32_t val) "Write diagnostic %08x" +ecc_mem_writel_ecr0(uint32_t val) "Write event count 1 %08x" +ecc_mem_writel_ecr1(uint32_t val) "Write event count 2 %08x" +ecc_mem_readl_mer(uint32_t ret) "Read memory enable %08x" +ecc_mem_readl_mdr(uint32_t ret) "Read memory delay %08x" +ecc_mem_readl_mfsr(uint32_t ret) "Read memory fault status %08x" +ecc_mem_readl_vcr(uint32_t ret) "Read slot configuration %08x" +ecc_mem_readl_mfar0(uint32_t ret) "Read memory fault address 0 %08x" +ecc_mem_readl_mfar1(uint32_t ret) "Read memory fault address 1 %08x" +ecc_mem_readl_dr(uint32_t ret) "Read diagnostic %08x" +ecc_mem_readl_ecr0(uint32_t ret) "Read event count 1 %08x" +ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 %08x" +ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = %02x" +ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= %02x" # hw/lance.c -disable lance_mem_readw(uint64_t addr, uint32_t ret) "addr=%"PRIx64"val=0x%04x" -disable lance_mem_writew(uint64_t addr, uint32_t val) "addr=%"PRIx64"val=0x%04x" +lance_mem_readw(uint64_t addr, uint32_t ret) "addr=%"PRIx64"val=0x%04x" +lance_mem_writew(uint64_t addr, uint32_t val) "addr=%"PRIx64"val=0x%04x" # hw/slavio_intctl.c -disable slavio_intctl_mem_readl(uint32_t cpu, uint64_t addr, uint32_t ret) "read cpu %d reg 0x%"PRIx64" = %x" -disable slavio_intctl_mem_writel(uint32_t cpu, uint64_t addr, uint32_t val) "write cpu %d reg 0x%"PRIx64" = %x" -disable slavio_intctl_mem_writel_clear(uint32_t cpu, uint32_t val, uint32_t intreg_pending) "Cleared cpu %d irq mask %x, curmask %x" -disable slavio_intctl_mem_writel_set(uint32_t cpu, uint32_t val, uint32_t intreg_pending) "Set cpu %d irq mask %x, curmask %x" -disable slavio_intctlm_mem_readl(uint64_t addr, uint32_t ret) "read system reg 0x%"PRIx64" = %x" -disable slavio_intctlm_mem_writel(uint64_t addr, uint32_t val) "write system reg 0x%"PRIx64" = %x" -disable slavio_intctlm_mem_writel_enable(uint32_t val, uint32_t intregm_disabled) "Enabled master irq mask %x, curmask %x" -disable slavio_intctlm_mem_writel_disable(uint32_t val, uint32_t intregm_disabled) "Disabled master irq mask %x, curmask %x" -disable slavio_intctlm_mem_writel_target(uint32_t cpu) "Set master irq cpu %d" -disable slavio_check_interrupts(uint32_t pending, uint32_t intregm_disabled) "pending %x disabled %x" -disable slavio_set_irq(uint32_t target_cpu, int irq, uint32_t pil, int level) "Set cpu %d irq %d -> pil %d level %d" -disable slavio_set_timer_irq_cpu(int cpu, int level) "Set cpu %d local timer level %d" +slavio_intctl_mem_readl(uint32_t cpu, uint64_t addr, uint32_t ret) "read cpu %d reg 0x%"PRIx64" = %x" +slavio_intctl_mem_writel(uint32_t cpu, uint64_t addr, uint32_t val) "write cpu %d reg 0x%"PRIx64" = %x" +slavio_intctl_mem_writel_clear(uint32_t cpu, uint32_t val, uint32_t intreg_pending) "Cleared cpu %d irq mask %x, curmask %x" +slavio_intctl_mem_writel_set(uint32_t cpu, uint32_t val, uint32_t intreg_pending) "Set cpu %d irq mask %x, curmask %x" +slavio_intctlm_mem_readl(uint64_t addr, uint32_t ret) "read system reg 0x%"PRIx64" = %x" +slavio_intctlm_mem_writel(uint64_t addr, uint32_t val) "write system reg 0x%"PRIx64" = %x" +slavio_intctlm_mem_writel_enable(uint32_t val, uint32_t intregm_disabled) "Enabled master irq mask %x, curmask %x" +slavio_intctlm_mem_writel_disable(uint32_t val, uint32_t intregm_disabled) "Disabled master irq mask %x, curmask %x" +slavio_intctlm_mem_writel_target(uint32_t cpu) "Set master irq cpu %d" +slavio_check_interrupts(uint32_t pending, uint32_t intregm_disabled) "pending %x disabled %x" +slavio_set_irq(uint32_t target_cpu, int irq, uint32_t pil, int level) "Set cpu %d irq %d -> pil %d level %d" +slavio_set_timer_irq_cpu(int cpu, int level) "Set cpu %d local timer level %d" # hw/slavio_misc.c -disable slavio_misc_update_irq_raise(void) "Raise IRQ" -disable slavio_misc_update_irq_lower(void) "Lower IRQ" -disable slavio_set_power_fail(int power_failing, uint8_t config) "Power fail: %d, config: %d" -disable slavio_cfg_mem_writeb(uint32_t val) "Write config %02x" -disable slavio_cfg_mem_readb(uint32_t ret) "Read config %02x" -disable slavio_diag_mem_writeb(uint32_t val) "Write diag %02x" -disable slavio_diag_mem_readb(uint32_t ret) "Read diag %02x" -disable slavio_mdm_mem_writeb(uint32_t val) "Write modem control %02x" -disable slavio_mdm_mem_readb(uint32_t ret) "Read modem control %02x" -disable slavio_aux1_mem_writeb(uint32_t val) "Write aux1 %02x" -disable slavio_aux1_mem_readb(uint32_t ret) "Read aux1 %02x" -disable slavio_aux2_mem_writeb(uint32_t val) "Write aux2 %02x" -disable slavio_aux2_mem_readb(uint32_t ret) "Read aux2 %02x" -disable apc_mem_writeb(uint32_t val) "Write power management %02x" -disable apc_mem_readb(uint32_t ret) "Read power management %02x" -disable slavio_sysctrl_mem_writel(uint32_t val) "Write system control %08x" -disable slavio_sysctrl_mem_readl(uint32_t ret) "Read system control %08x" -disable slavio_led_mem_writew(uint32_t val) "Write diagnostic LED %04x" -disable slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED %04x" +slavio_misc_update_irq_raise(void) "Raise IRQ" +slavio_misc_update_irq_lower(void) "Lower IRQ" +slavio_set_power_fail(int power_failing, uint8_t config) "Power fail: %d, config: %d" +slavio_cfg_mem_writeb(uint32_t val) "Write config %02x" +slavio_cfg_mem_readb(uint32_t ret) "Read config %02x" +slavio_diag_mem_writeb(uint32_t val) "Write diag %02x" +slavio_diag_mem_readb(uint32_t ret) "Read diag %02x" +slavio_mdm_mem_writeb(uint32_t val) "Write modem control %02x" +slavio_mdm_mem_readb(uint32_t ret) "Read modem control %02x" +slavio_aux1_mem_writeb(uint32_t val) "Write aux1 %02x" +slavio_aux1_mem_readb(uint32_t ret) "Read aux1 %02x" +slavio_aux2_mem_writeb(uint32_t val) "Write aux2 %02x" +slavio_aux2_mem_readb(uint32_t ret) "Read aux2 %02x" +apc_mem_writeb(uint32_t val) "Write power management %02x" +apc_mem_readb(uint32_t ret) "Read power management %02x" +slavio_sysctrl_mem_writel(uint32_t val) "Write system control %08x" +slavio_sysctrl_mem_readl(uint32_t ret) "Read system control %08x" +slavio_led_mem_writew(uint32_t val) "Write diagnostic LED %04x" +slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED %04x" # hw/slavio_timer.c -disable slavio_timer_get_out(uint64_t limit, uint32_t counthigh, uint32_t count) "limit %"PRIx64" count %x%08x" -disable slavio_timer_irq(uint32_t counthigh, uint32_t count) "callback: count %x%08x" -disable slavio_timer_mem_readl_invalid(uint64_t addr) "invalid read address %"PRIx64"" -disable slavio_timer_mem_readl(uint64_t addr, uint32_t ret) "read %"PRIx64" = %08x" -disable slavio_timer_mem_writel(uint64_t addr, uint32_t val) "write %"PRIx64" = %08x" -disable slavio_timer_mem_writel_limit(unsigned int timer_index, uint64_t count) "processor %d user timer set to %016"PRIx64"" -disable slavio_timer_mem_writel_counter_invalid(void) "not user timer" -disable slavio_timer_mem_writel_status_start(unsigned int timer_index) "processor %d user timer started" -disable slavio_timer_mem_writel_status_stop(unsigned int timer_index) "processor %d user timer stopped" -disable slavio_timer_mem_writel_mode_user(unsigned int timer_index) "processor %d changed from counter to user timer" -disable slavio_timer_mem_writel_mode_counter(unsigned int timer_index) "processor %d changed from user timer to counter" -disable slavio_timer_mem_writel_mode_invalid(void) "not system timer" -disable slavio_timer_mem_writel_invalid(uint64_t addr) "invalid write address %"PRIx64"" +slavio_timer_get_out(uint64_t limit, uint32_t counthigh, uint32_t count) "limit %"PRIx64" count %x%08x" +slavio_timer_irq(uint32_t counthigh, uint32_t count) "callback: count %x%08x" +slavio_timer_mem_readl_invalid(uint64_t addr) "invalid read address %"PRIx64"" +slavio_timer_mem_readl(uint64_t addr, uint32_t ret) "read %"PRIx64" = %08x" +slavio_timer_mem_writel(uint64_t addr, uint32_t val) "write %"PRIx64" = %08x" +slavio_timer_mem_writel_limit(unsigned int timer_index, uint64_t count) "processor %d user timer set to %016"PRIx64"" +slavio_timer_mem_writel_counter_invalid(void) "not user timer" +slavio_timer_mem_writel_status_start(unsigned int timer_index) "processor %d user timer started" +slavio_timer_mem_writel_status_stop(unsigned int timer_index) "processor %d user timer stopped" +slavio_timer_mem_writel_mode_user(unsigned int timer_index) "processor %d changed from counter to user timer" +slavio_timer_mem_writel_mode_counter(unsigned int timer_index) "processor %d changed from user timer to counter" +slavio_timer_mem_writel_mode_invalid(void) "not system timer" +slavio_timer_mem_writel_invalid(uint64_t addr) "invalid write address %"PRIx64"" # hw/sparc32_dma.c -disable ledma_memory_read(uint64_t addr) "DMA read addr 0x%"PRIx64"" -disable ledma_memory_write(uint64_t addr) "DMA write addr 0x%"PRIx64"" -disable sparc32_dma_set_irq_raise(void) "Raise IRQ" -disable sparc32_dma_set_irq_lower(void) "Lower IRQ" -disable espdma_memory_read(uint32_t addr) "DMA read addr 0x%08x" -disable espdma_memory_write(uint32_t addr) "DMA write addr 0x%08x" -disable sparc32_dma_mem_readl(uint64_t addr, uint32_t ret) "read dmareg %"PRIx64": 0x%08x" -disable sparc32_dma_mem_writel(uint64_t addr, uint32_t old, uint32_t val) "write dmareg %"PRIx64": 0x%08x -> 0x%08x" -disable sparc32_dma_enable_raise(void) "Raise DMA enable" -disable sparc32_dma_enable_lower(void) "Lower DMA enable" +ledma_memory_read(uint64_t addr) "DMA read addr 0x%"PRIx64"" +ledma_memory_write(uint64_t addr) "DMA write addr 0x%"PRIx64"" +sparc32_dma_set_irq_raise(void) "Raise IRQ" +sparc32_dma_set_irq_lower(void) "Lower IRQ" +espdma_memory_read(uint32_t addr) "DMA read addr 0x%08x" +espdma_memory_write(uint32_t addr) "DMA write addr 0x%08x" +sparc32_dma_mem_readl(uint64_t addr, uint32_t ret) "read dmareg %"PRIx64": 0x%08x" +sparc32_dma_mem_writel(uint64_t addr, uint32_t old, uint32_t val) "write dmareg %"PRIx64": 0x%08x -> 0x%08x" +sparc32_dma_enable_raise(void) "Raise DMA enable" +sparc32_dma_enable_lower(void) "Lower DMA enable" # hw/sun4m.c -disable sun4m_cpu_interrupt(unsigned int level) "Set CPU IRQ %d" -disable sun4m_cpu_reset_interrupt(unsigned int level) "Reset CPU IRQ %d" -disable sun4m_cpu_set_irq_raise(int level) "Raise CPU IRQ %d" -disable sun4m_cpu_set_irq_lower(int level) "Lower CPU IRQ %d" +sun4m_cpu_interrupt(unsigned int level) "Set CPU IRQ %d" +sun4m_cpu_reset_interrupt(unsigned int level) "Reset CPU IRQ %d" +sun4m_cpu_set_irq_raise(int level) "Raise CPU IRQ %d" +sun4m_cpu_set_irq_lower(int level) "Lower CPU IRQ %d" # hw/sun4m_iommu.c -disable sun4m_iommu_mem_readl(uint64_t addr, uint32_t ret) "read reg[%"PRIx64"] = %x" -disable sun4m_iommu_mem_writel(uint64_t addr, uint32_t val) "write reg[%"PRIx64"] = %x" -disable sun4m_iommu_mem_writel_ctrl(uint64_t iostart) "iostart = %"PRIx64"" -disable sun4m_iommu_mem_writel_tlbflush(uint32_t val) "tlb flush %x" -disable sun4m_iommu_mem_writel_pgflush(uint32_t val) "page flush %x" -disable sun4m_iommu_page_get_flags(uint64_t pa, uint64_t iopte, uint32_t ret) "get flags addr %"PRIx64" => pte %"PRIx64", *pte = %x" -disable sun4m_iommu_translate_pa(uint64_t addr, uint64_t pa, uint32_t iopte) "xlate dva %"PRIx64" => pa %"PRIx64" iopte = %x" -disable sun4m_iommu_bad_addr(uint64_t addr) "bad addr %"PRIx64"" +sun4m_iommu_mem_readl(uint64_t addr, uint32_t ret) "read reg[%"PRIx64"] = %x" +sun4m_iommu_mem_writel(uint64_t addr, uint32_t val) "write reg[%"PRIx64"] = %x" +sun4m_iommu_mem_writel_ctrl(uint64_t iostart) "iostart = %"PRIx64"" +sun4m_iommu_mem_writel_tlbflush(uint32_t val) "tlb flush %x" +sun4m_iommu_mem_writel_pgflush(uint32_t val) "page flush %x" +sun4m_iommu_page_get_flags(uint64_t pa, uint64_t iopte, uint32_t ret) "get flags addr %"PRIx64" => pte %"PRIx64", *pte = %x" +sun4m_iommu_translate_pa(uint64_t addr, uint64_t pa, uint32_t iopte) "xlate dva %"PRIx64" => pa %"PRIx64" iopte = %x" +sun4m_iommu_bad_addr(uint64_t addr) "bad addr %"PRIx64"" # hw/usb-ehci.c -disable usb_ehci_reset(void) "=== RESET ===" -disable usb_ehci_mmio_readl(uint32_t addr, const char *str, uint32_t val) "rd mmio %04x [%s] = %x" -disable usb_ehci_mmio_writel(uint32_t addr, const char *str, uint32_t val) "wr mmio %04x [%s] = %x" -disable usb_ehci_mmio_change(uint32_t addr, const char *str, uint32_t new, uint32_t old) "ch mmio %04x [%s] = %x (old: %x)" -disable usb_ehci_usbsts(const char *sts, int state) "usbsts %s %d" -disable usb_ehci_state(const char *schedule, const char *state) "%s schedule %s" -disable usb_ehci_qh_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t c_qtd, uint32_t n_qtd, uint32_t a_qtd) "q %p - QH @ %08x: next %08x qtds %08x,%08x,%08x" -disable usb_ehci_qh_fields(uint32_t addr, int rl, int mplen, int eps, int ep, int devaddr) "QH @ %08x - rl %d, mplen %d, eps %d, ep %d, dev %d" -disable usb_ehci_qh_bits(uint32_t addr, int c, int h, int dtc, int i) "QH @ %08x - c %d, h %d, dtc %d, i %d" -disable usb_ehci_qtd_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t altnext) "q %p - QTD @ %08x: next %08x altnext %08x" -disable usb_ehci_qtd_fields(uint32_t addr, int tbytes, int cpage, int cerr, int pid) "QTD @ %08x - tbytes %d, cpage %d, cerr %d, pid %d" -disable usb_ehci_qtd_bits(uint32_t addr, int ioc, int active, int halt, int babble, int xacterr) "QTD @ %08x - ioc %d, active %d, halt %d, babble %d, xacterr %d" -disable usb_ehci_itd(uint32_t addr, uint32_t nxt, uint32_t mplen, uint32_t mult, uint32_t ep, uint32_t devaddr) "ITD @ %08x: next %08x - mplen %d, mult %d, ep %d, dev %d" -disable usb_ehci_port_attach(uint32_t port, const char *device) "attach port #%d - %s" -disable usb_ehci_port_detach(uint32_t port) "detach port #%d" -disable usb_ehci_port_reset(uint32_t port, int enable) "reset port #%d - %d" -disable usb_ehci_data(int rw, uint32_t cpage, uint32_t offset, uint32_t addr, uint32_t len, uint32_t bufpos) "write %d, cpage %d, offset 0x%03x, addr 0x%08x, len %d, bufpos %d" -disable usb_ehci_queue_action(void *q, const char *action) "q %p: %s" +usb_ehci_reset(void) "=== RESET ===" +usb_ehci_mmio_readl(uint32_t addr, const char *str, uint32_t val) "rd mmio %04x [%s] = %x" +usb_ehci_mmio_writel(uint32_t addr, const char *str, uint32_t val) "wr mmio %04x [%s] = %x" +usb_ehci_mmio_change(uint32_t addr, const char *str, uint32_t new, uint32_t old) "ch mmio %04x [%s] = %x (old: %x)" +usb_ehci_usbsts(const char *sts, int state) "usbsts %s %d" +usb_ehci_state(const char *schedule, const char *state) "%s schedule %s" +usb_ehci_qh_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t c_qtd, uint32_t n_qtd, uint32_t a_qtd) "q %p - QH @ %08x: next %08x qtds %08x,%08x,%08x" +usb_ehci_qh_fields(uint32_t addr, int rl, int mplen, int eps, int ep, int devaddr) "QH @ %08x - rl %d, mplen %d, eps %d, ep %d, dev %d" +usb_ehci_qh_bits(uint32_t addr, int c, int h, int dtc, int i) "QH @ %08x - c %d, h %d, dtc %d, i %d" +usb_ehci_qtd_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t altnext) "q %p - QTD @ %08x: next %08x altnext %08x" +usb_ehci_qtd_fields(uint32_t addr, int tbytes, int cpage, int cerr, int pid) "QTD @ %08x - tbytes %d, cpage %d, cerr %d, pid %d" +usb_ehci_qtd_bits(uint32_t addr, int ioc, int active, int halt, int babble, int xacterr) "QTD @ %08x - ioc %d, active %d, halt %d, babble %d, xacterr %d" +usb_ehci_itd(uint32_t addr, uint32_t nxt, uint32_t mplen, uint32_t mult, uint32_t ep, uint32_t devaddr) "ITD @ %08x: next %08x - mplen %d, mult %d, ep %d, dev %d" +usb_ehci_port_attach(uint32_t port, const char *device) "attach port #%d - %s" +usb_ehci_port_detach(uint32_t port) "detach port #%d" +usb_ehci_port_reset(uint32_t port, int enable) "reset port #%d - %d" +usb_ehci_data(int rw, uint32_t cpage, uint32_t offset, uint32_t addr, uint32_t len, uint32_t bufpos) "write %d, cpage %d, offset 0x%03x, addr 0x%08x, len %d, bufpos %d" +usb_ehci_queue_action(void *q, const char *action) "q %p: %s" # hw/usb-desc.c -disable usb_desc_device(int addr, int len, int ret) "dev %d query device, len %d, ret %d" -disable usb_desc_device_qualifier(int addr, int len, int ret) "dev %d query device qualifier, len %d, ret %d" -disable usb_desc_config(int addr, int index, int len, int ret) "dev %d query config %d, len %d, ret %d" -disable usb_desc_other_speed_config(int addr, int index, int len, int ret) "dev %d query config %d, len %d, ret %d" -disable usb_desc_string(int addr, int index, int len, int ret) "dev %d query string %d, len %d, ret %d" -disable usb_set_addr(int addr) "dev %d" -disable usb_set_config(int addr, int config, int ret) "dev %d, config %d, ret %d" -disable usb_clear_device_feature(int addr, int feature, int ret) "dev %d, feature %d, ret %d" -disable usb_set_device_feature(int addr, int feature, int ret) "dev %d, feature %d, ret %d" +usb_desc_device(int addr, int len, int ret) "dev %d query device, len %d, ret %d" +usb_desc_device_qualifier(int addr, int len, int ret) "dev %d query device qualifier, len %d, ret %d" +usb_desc_config(int addr, int index, int len, int ret) "dev %d query config %d, len %d, ret %d" +usb_desc_other_speed_config(int addr, int index, int len, int ret) "dev %d query config %d, len %d, ret %d" +usb_desc_string(int addr, int index, int len, int ret) "dev %d query string %d, len %d, ret %d" +usb_set_addr(int addr) "dev %d" +usb_set_config(int addr, int config, int ret) "dev %d, config %d, ret %d" +usb_clear_device_feature(int addr, int feature, int ret) "dev %d, feature %d, ret %d" +usb_set_device_feature(int addr, int feature, int ret) "dev %d, feature %d, ret %d" # hw/scsi-bus.c -disable scsi_req_alloc(int target, int lun, int tag) "target %d lun %d tag %d" -disable scsi_req_data(int target, int lun, int tag, int len) "target %d lun %d tag %d len %d" -disable scsi_req_dequeue(int target, int lun, int tag) "target %d lun %d tag %d" -disable scsi_req_continue(int target, int lun, int tag) "target %d lun %d tag %d" -disable scsi_req_parsed(int target, int lun, int tag, int cmd, int mode, int xfer) "target %d lun %d tag %d command %d dir %d length %d" -disable scsi_req_parsed_lba(int target, int lun, int tag, int cmd, uint64_t lba) "target %d lun %d tag %d command %d lba %"PRIu64"" -disable scsi_req_parse_bad(int target, int lun, int tag, int cmd) "target %d lun %d tag %d command %d" -disable scsi_req_build_sense(int target, int lun, int tag, int key, int asc, int ascq) "target %d lun %d tag %d key %#02x asc %#02x ascq %#02x" -disable scsi_report_luns(int target, int lun, int tag) "target %d lun %d tag %d" -disable scsi_inquiry(int target, int lun, int tag, int cdb1, int cdb2) "target %d lun %d tag %d page %#02x/%#02x" -disable scsi_test_unit_ready(int target, int lun, int tag) "target %d lun %d tag %d" -disable scsi_request_sense(int target, int lun, int tag) "target %d lun %d tag %d" +scsi_req_alloc(int target, int lun, int tag) "target %d lun %d tag %d" +scsi_req_data(int target, int lun, int tag, int len) "target %d lun %d tag %d len %d" +scsi_req_dequeue(int target, int lun, int tag) "target %d lun %d tag %d" +scsi_req_continue(int target, int lun, int tag) "target %d lun %d tag %d" +scsi_req_parsed(int target, int lun, int tag, int cmd, int mode, int xfer) "target %d lun %d tag %d command %d dir %d length %d" +scsi_req_parsed_lba(int target, int lun, int tag, int cmd, uint64_t lba) "target %d lun %d tag %d command %d lba %"PRIu64"" +scsi_req_parse_bad(int target, int lun, int tag, int cmd) "target %d lun %d tag %d command %d" +scsi_req_build_sense(int target, int lun, int tag, int key, int asc, int ascq) "target %d lun %d tag %d key %#02x asc %#02x ascq %#02x" +scsi_report_luns(int target, int lun, int tag) "target %d lun %d tag %d" +scsi_inquiry(int target, int lun, int tag, int cdb1, int cdb2) "target %d lun %d tag %d page %#02x/%#02x" +scsi_test_unit_ready(int target, int lun, int tag) "target %d lun %d tag %d" +scsi_request_sense(int target, int lun, int tag) "target %d lun %d tag %d" # vl.c -disable vm_state_notify(int running, int reason) "running %d reason %d" +vm_state_notify(int running, int reason) "running %d reason %d" # block/qed-l2-cache.c -disable qed_alloc_l2_cache_entry(void *l2_cache, void *entry) "l2_cache %p entry %p" -disable qed_unref_l2_cache_entry(void *entry, int ref) "entry %p ref %d" -disable qed_find_l2_cache_entry(void *l2_cache, void *entry, uint64_t offset, int ref) "l2_cache %p entry %p offset %"PRIu64" ref %d" +qed_alloc_l2_cache_entry(void *l2_cache, void *entry) "l2_cache %p entry %p" +qed_unref_l2_cache_entry(void *entry, int ref) "entry %p ref %d" +qed_find_l2_cache_entry(void *l2_cache, void *entry, uint64_t offset, int ref) "l2_cache %p entry %p offset %"PRIu64" ref %d" # block/qed-table.c -disable qed_read_table(void *s, uint64_t offset, void *table) "s %p offset %"PRIu64" table %p" -disable qed_read_table_cb(void *s, void *table, int ret) "s %p table %p ret %d" -disable qed_write_table(void *s, uint64_t offset, void *table, unsigned int index, unsigned int n) "s %p offset %"PRIu64" table %p index %u n %u" -disable qed_write_table_cb(void *s, void *table, int flush, int ret) "s %p table %p flush %d ret %d" +qed_read_table(void *s, uint64_t offset, void *table) "s %p offset %"PRIu64" table %p" +qed_read_table_cb(void *s, void *table, int ret) "s %p table %p ret %d" +qed_write_table(void *s, uint64_t offset, void *table, unsigned int index, unsigned int n) "s %p offset %"PRIu64" table %p index %u n %u" +qed_write_table_cb(void *s, void *table, int flush, int ret) "s %p table %p flush %d ret %d" # block/qed.c -disable qed_need_check_timer_cb(void *s) "s %p" -disable qed_start_need_check_timer(void *s) "s %p" -disable qed_cancel_need_check_timer(void *s) "s %p" -disable qed_aio_complete(void *s, void *acb, int ret) "s %p acb %p ret %d" -disable qed_aio_setup(void *s, void *acb, int64_t sector_num, int nb_sectors, void *opaque, int is_write) "s %p acb %p sector_num %"PRId64" nb_sectors %d opaque %p is_write %d" -disable qed_aio_next_io(void *s, void *acb, int ret, uint64_t cur_pos) "s %p acb %p ret %d cur_pos %"PRIu64"" -disable qed_aio_read_data(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu" -disable qed_aio_write_data(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu" -disable qed_aio_write_prefill(void *s, void *acb, uint64_t start, size_t len, uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64"" -disable qed_aio_write_postfill(void *s, void *acb, uint64_t start, size_t len, uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64"" -disable qed_aio_write_main(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu" +qed_need_check_timer_cb(void *s) "s %p" +qed_start_need_check_timer(void *s) "s %p" +qed_cancel_need_check_timer(void *s) "s %p" +qed_aio_complete(void *s, void *acb, int ret) "s %p acb %p ret %d" +qed_aio_setup(void *s, void *acb, int64_t sector_num, int nb_sectors, void *opaque, int is_write) "s %p acb %p sector_num %"PRId64" nb_sectors %d opaque %p is_write %d" +qed_aio_next_io(void *s, void *acb, int ret, uint64_t cur_pos) "s %p acb %p ret %d cur_pos %"PRIu64"" +qed_aio_read_data(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu" +qed_aio_write_data(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu" +qed_aio_write_prefill(void *s, void *acb, uint64_t start, size_t len, uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64"" +qed_aio_write_postfill(void *s, void *acb, uint64_t start, size_t len, uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64"" +qed_aio_write_main(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu" # hw/g364fb.c -disable g364fb_read(uint64_t addr, uint32_t val) "read addr=0x%"PRIx64": 0x%x" -disable g364fb_write(uint64_t addr, uint32_t new) "write addr=0x%"PRIx64": 0x%x" +g364fb_read(uint64_t addr, uint32_t val) "read addr=0x%"PRIx64": 0x%x" +g364fb_write(uint64_t addr, uint32_t new) "write addr=0x%"PRIx64": 0x%x" # hw/grlib_gptimer.c -disable grlib_gptimer_enable(int id, uint32_t count) "timer:%d set count 0x%x and run" -disable grlib_gptimer_disabled(int id, uint32_t config) "timer:%d Timer disable config 0x%x" -disable grlib_gptimer_restart(int id, uint32_t reload) "timer:%d reload val: 0x%x" -disable grlib_gptimer_set_scaler(uint32_t scaler, uint32_t freq) "scaler:0x%x freq: 0x%x" -disable grlib_gptimer_hit(int id) "timer:%d HIT" -disable grlib_gptimer_readl(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x" -disable grlib_gptimer_writel(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x" +grlib_gptimer_enable(int id, uint32_t count) "timer:%d set count 0x%x and run" +grlib_gptimer_disabled(int id, uint32_t config) "timer:%d Timer disable config 0x%x" +grlib_gptimer_restart(int id, uint32_t reload) "timer:%d reload val: 0x%x" +grlib_gptimer_set_scaler(uint32_t scaler, uint32_t freq) "scaler:0x%x freq: 0x%x" +grlib_gptimer_hit(int id) "timer:%d HIT" +grlib_gptimer_readl(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x" +grlib_gptimer_writel(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x" # hw/grlib_irqmp.c -disable grlib_irqmp_check_irqs(uint32_t pend, uint32_t force, uint32_t mask, uint32_t lvl1, uint32_t lvl2) "pend:0x%04x force:0x%04x mask:0x%04x lvl1:0x%04x lvl0:0x%04x\n" -disable grlib_irqmp_ack(int intno) "interrupt:%d" -disable grlib_irqmp_set_irq(int irq) "Raise CPU IRQ %d" -disable grlib_irqmp_readl_unknown(uint64_t addr) "addr 0x%"PRIx64"" -disable grlib_irqmp_writel_unknown(uint64_t addr, uint32_t value) "addr 0x%"PRIx64" value 0x%x" +grlib_irqmp_check_irqs(uint32_t pend, uint32_t force, uint32_t mask, uint32_t lvl1, uint32_t lvl2) "pend:0x%04x force:0x%04x mask:0x%04x lvl1:0x%04x lvl0:0x%04x\n" +grlib_irqmp_ack(int intno) "interrupt:%d" +grlib_irqmp_set_irq(int irq) "Raise CPU IRQ %d" +grlib_irqmp_readl_unknown(uint64_t addr) "addr 0x%"PRIx64"" +grlib_irqmp_writel_unknown(uint64_t addr, uint32_t value) "addr 0x%"PRIx64" value 0x%x" # hw/grlib_apbuart.c -disable grlib_apbuart_event(int event) "event:%d" -disable grlib_apbuart_writel_unknown(uint64_t addr, uint32_t value) "addr 0x%"PRIx64" value 0x%x" +grlib_apbuart_event(int event) "event:%d" +grlib_apbuart_writel_unknown(uint64_t addr, uint32_t value) "addr 0x%"PRIx64" value 0x%x" # hw/leon3.c -disable leon3_set_irq(int intno) "Set CPU IRQ %d" -disable leon3_reset_irq(int intno) "Reset CPU IRQ %d" +leon3_set_irq(int intno) "Set CPU IRQ %d" +leon3_reset_irq(int intno) "Reset CPU IRQ %d" # spice-qemu-char.c -disable spice_vmc_write(ssize_t out, int len) "spice wrottn %zd of requested %d" -disable spice_vmc_read(int bytes, int len) "spice read %d of requested %d" -disable spice_vmc_register_interface(void *scd) "spice vmc registered interface %p" -disable spice_vmc_unregister_interface(void *scd) "spice vmc unregistered interface %p" +spice_vmc_write(ssize_t out, int len) "spice wrottn %zd of requested %d" +spice_vmc_read(int bytes, int len) "spice read %d of requested %d" +spice_vmc_register_interface(void *scd) "spice vmc registered interface %p" +spice_vmc_unregister_interface(void *scd) "spice vmc unregistered interface %p" # hw/lm32_pic.c -disable lm32_pic_raise_irq(void) "Raise CPU interrupt" -disable lm32_pic_lower_irq(void) "Lower CPU interrupt" -disable lm32_pic_interrupt(int irq, int level) "Set IRQ%d %d" -disable lm32_pic_set_im(uint32_t im) "im 0x%08x" -disable lm32_pic_set_ip(uint32_t ip) "ip 0x%08x" -disable lm32_pic_get_im(uint32_t im) "im 0x%08x" -disable lm32_pic_get_ip(uint32_t ip) "ip 0x%08x" +lm32_pic_raise_irq(void) "Raise CPU interrupt" +lm32_pic_lower_irq(void) "Lower CPU interrupt" +lm32_pic_interrupt(int irq, int level) "Set IRQ%d %d" +lm32_pic_set_im(uint32_t im) "im 0x%08x" +lm32_pic_set_ip(uint32_t ip) "ip 0x%08x" +lm32_pic_get_im(uint32_t im) "im 0x%08x" +lm32_pic_get_ip(uint32_t ip) "ip 0x%08x" # hw/lm32_juart.c -disable lm32_juart_get_jtx(uint32_t value) "jtx 0x%08x" -disable lm32_juart_set_jtx(uint32_t value) "jtx 0x%08x" -disable lm32_juart_get_jrx(uint32_t value) "jrx 0x%08x" -disable lm32_juart_set_jrx(uint32_t value) "jrx 0x%08x" +lm32_juart_get_jtx(uint32_t value) "jtx 0x%08x" +lm32_juart_set_jtx(uint32_t value) "jtx 0x%08x" +lm32_juart_get_jrx(uint32_t value) "jrx 0x%08x" +lm32_juart_set_jrx(uint32_t value) "jrx 0x%08x" # hw/lm32_timer.c -disable lm32_timer_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" -disable lm32_timer_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" -disable lm32_timer_hit(void) "timer hit" -disable lm32_timer_irq_state(int level) "irq state %d" +lm32_timer_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" +lm32_timer_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" +lm32_timer_hit(void) "timer hit" +lm32_timer_irq_state(int level) "irq state %d" # hw/lm32_uart.c -disable lm32_uart_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" -disable lm32_uart_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" -disable lm32_uart_irq_state(int level) "irq state %d" +lm32_uart_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" +lm32_uart_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" +lm32_uart_irq_state(int level) "irq state %d" # hw/lm32_sys.c -disable lm32_sys_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" +lm32_sys_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" # hw/milkymist-ac97.c -disable milkymist_ac97_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" -disable milkymist_ac97_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" -disable milkymist_ac97_pulse_irq_crrequest(void) "Pulse IRQ CR request" -disable milkymist_ac97_pulse_irq_crreply(void) "Pulse IRQ CR reply" -disable milkymist_ac97_pulse_irq_dmaw(void) "Pulse IRQ DMA write" -disable milkymist_ac97_pulse_irq_dmar(void) "Pulse IRQ DMA read" -disable milkymist_ac97_in_cb(int avail, uint32_t remaining) "avail %d remaining %u" -disable milkymist_ac97_in_cb_transferred(int transferred) "transferred %d" -disable milkymist_ac97_out_cb(int free, uint32_t remaining) "free %d remaining %u" -disable milkymist_ac97_out_cb_transferred(int transferred) "transferred %d" +milkymist_ac97_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_ac97_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_ac97_pulse_irq_crrequest(void) "Pulse IRQ CR request" +milkymist_ac97_pulse_irq_crreply(void) "Pulse IRQ CR reply" +milkymist_ac97_pulse_irq_dmaw(void) "Pulse IRQ DMA write" +milkymist_ac97_pulse_irq_dmar(void) "Pulse IRQ DMA read" +milkymist_ac97_in_cb(int avail, uint32_t remaining) "avail %d remaining %u" +milkymist_ac97_in_cb_transferred(int transferred) "transferred %d" +milkymist_ac97_out_cb(int free, uint32_t remaining) "free %d remaining %u" +milkymist_ac97_out_cb_transferred(int transferred) "transferred %d" # hw/milkymist-hpdmc.c -disable milkymist_hpdmc_memory_read(uint32_t addr, uint32_t value) "addr=%08x value=%08x" -disable milkymist_hpdmc_memory_write(uint32_t addr, uint32_t value) "addr=%08x value=%08x" +milkymist_hpdmc_memory_read(uint32_t addr, uint32_t value) "addr=%08x value=%08x" +milkymist_hpdmc_memory_write(uint32_t addr, uint32_t value) "addr=%08x value=%08x" # hw/milkymist-memcard.c -disable milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" -disable milkymist_memcard_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_memcard_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" # hw/milkymist-minimac2.c -disable milkymist_minimac2_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" -disable milkymist_minimac2_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" -disable milkymist_minimac2_mdio_write(uint8_t phy_addr, uint8_t addr, uint16_t value) "phy_addr %02x addr %02x value %04x" -disable milkymist_minimac2_mdio_read(uint8_t phy_addr, uint8_t addr, uint16_t value) "phy_addr %02x addr %02x value %04x" -disable milkymist_minimac2_tx_frame(uint32_t length) "length %u" -disable milkymist_minimac2_rx_frame(const void *buf, uint32_t length) "buf %p length %u" -disable milkymist_minimac2_drop_rx_frame(const void *buf) "buf %p" -disable milkymist_minimac2_rx_transfer(const void *buf, uint32_t length) "buf %p length %d" -disable milkymist_minimac2_raise_irq_rx(void) "Raise IRQ RX" -disable milkymist_minimac2_lower_irq_rx(void) "Lower IRQ RX" -disable milkymist_minimac2_pulse_irq_tx(void) "Pulse IRQ TX" +milkymist_minimac2_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_minimac2_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_minimac2_mdio_write(uint8_t phy_addr, uint8_t addr, uint16_t value) "phy_addr %02x addr %02x value %04x" +milkymist_minimac2_mdio_read(uint8_t phy_addr, uint8_t addr, uint16_t value) "phy_addr %02x addr %02x value %04x" +milkymist_minimac2_tx_frame(uint32_t length) "length %u" +milkymist_minimac2_rx_frame(const void *buf, uint32_t length) "buf %p length %u" +milkymist_minimac2_drop_rx_frame(const void *buf) "buf %p" +milkymist_minimac2_rx_transfer(const void *buf, uint32_t length) "buf %p length %d" +milkymist_minimac2_raise_irq_rx(void) "Raise IRQ RX" +milkymist_minimac2_lower_irq_rx(void) "Lower IRQ RX" +milkymist_minimac2_pulse_irq_tx(void) "Pulse IRQ TX" # hw/milkymist-pfpu.c -disable milkymist_pfpu_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" -disable milkymist_pfpu_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" -disable milkymist_pfpu_vectout(uint32_t a, uint32_t b, uint32_t dma_ptr) "a %08x b %08x dma_ptr %08x" -disable milkymist_pfpu_pulse_irq(void) "Pulse IRQ" +milkymist_pfpu_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_pfpu_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_pfpu_vectout(uint32_t a, uint32_t b, uint32_t dma_ptr) "a %08x b %08x dma_ptr %08x" +milkymist_pfpu_pulse_irq(void) "Pulse IRQ" # hw/milkymist-softusb.c -disable milkymist_softusb_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" -disable milkymist_softusb_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" -disable milkymist_softusb_mevt(uint8_t m) "m %d" -disable milkymist_softusb_kevt(uint8_t m) "m %d" -disable milkymist_softusb_mouse_event(int dx, int dy, int dz, int bs) "dx %d dy %d dz %d bs %02x" -disable milkymist_softusb_pulse_irq(void) "Pulse IRQ" +milkymist_softusb_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_softusb_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_softusb_mevt(uint8_t m) "m %d" +milkymist_softusb_kevt(uint8_t m) "m %d" +milkymist_softusb_mouse_event(int dx, int dy, int dz, int bs) "dx %d dy %d dz %d bs %02x" +milkymist_softusb_pulse_irq(void) "Pulse IRQ" # hw/milkymist-sysctl.c -disable milkymist_sysctl_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" -disable milkymist_sysctl_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" -disable milkymist_sysctl_icap_write(uint32_t value) "value %08x" -disable milkymist_sysctl_start_timer0(void) "Start timer0" -disable milkymist_sysctl_stop_timer0(void) "Stop timer0" -disable milkymist_sysctl_start_timer1(void) "Start timer1" -disable milkymist_sysctl_stop_timer1(void) "Stop timer1" -disable milkymist_sysctl_pulse_irq_timer0(void) "Pulse IRQ Timer0" -disable milkymist_sysctl_pulse_irq_timer1(void) "Pulse IRQ Timer1" +milkymist_sysctl_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_sysctl_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_sysctl_icap_write(uint32_t value) "value %08x" +milkymist_sysctl_start_timer0(void) "Start timer0" +milkymist_sysctl_stop_timer0(void) "Stop timer0" +milkymist_sysctl_start_timer1(void) "Start timer1" +milkymist_sysctl_stop_timer1(void) "Stop timer1" +milkymist_sysctl_pulse_irq_timer0(void) "Pulse IRQ Timer0" +milkymist_sysctl_pulse_irq_timer1(void) "Pulse IRQ Timer1" # hw/milkymist-tmu2.c -disable milkymist_tmu2_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" -disable milkymist_tmu2_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" -disable milkymist_tmu2_start(void) "Start TMU" -disable milkymist_tmu2_pulse_irq(void) "Pulse IRQ" +milkymist_tmu2_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_tmu2_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_tmu2_start(void) "Start TMU" +milkymist_tmu2_pulse_irq(void) "Pulse IRQ" # hw/milkymist-uart.c -disable milkymist_uart_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" -disable milkymist_uart_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" -disable milkymist_uart_pulse_irq_rx(void) "Pulse IRQ RX" -disable milkymist_uart_pulse_irq_tx(void) "Pulse IRQ TX" +milkymist_uart_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_uart_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_uart_pulse_irq_rx(void) "Pulse IRQ RX" +milkymist_uart_pulse_irq_tx(void) "Pulse IRQ TX" # hw/milkymist-vgafb.c -disable milkymist_vgafb_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" -disable milkymist_vgafb_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_vgafb_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" +milkymist_vgafb_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" # xen-all.c -disable xen_ram_alloc(unsigned long ram_addr, unsigned long size) "requested: %#lx, size %#lx" -disable xen_client_set_memory(uint64_t start_addr, unsigned long size, unsigned long phys_offset, bool log_dirty) "%#"PRIx64" size %#lx, offset %#lx, log_dirty %i" +xen_ram_alloc(unsigned long ram_addr, unsigned long size) "requested: %#lx, size %#lx" +xen_client_set_memory(uint64_t start_addr, unsigned long size, unsigned long phys_offset, bool log_dirty) "%#"PRIx64" size %#lx, offset %#lx, log_dirty %i" # xen-mapcache.c -disable xen_map_cache(uint64_t phys_addr) "want %#"PRIx64"" -disable xen_remap_bucket(uint64_t index) "index %#"PRIx64"" -disable xen_map_cache_return(void* ptr) "%p" -disable xen_map_block(uint64_t phys_addr, uint64_t size) "%#"PRIx64", size %#"PRIx64"" -disable xen_unmap_block(void* addr, unsigned long size) "%p, size %#lx" +xen_map_cache(uint64_t phys_addr) "want %#"PRIx64"" +xen_remap_bucket(uint64_t index) "index %#"PRIx64"" +xen_map_cache_return(void* ptr) "%p" +xen_map_block(uint64_t phys_addr, uint64_t size) "%#"PRIx64", size %#"PRIx64"" +xen_unmap_block(void* addr, unsigned long size) "%p, size %#lx" # exec.c -disable qemu_put_ram_ptr(void* addr) "%p" +qemu_put_ram_ptr(void* addr) "%p" # hw/xen_platform.c -disable xen_platform_log(char *s) "xen platform: %s" +xen_platform_log(char *s) "xen platform: %s" # qemu-coroutine.c -disable qemu_coroutine_enter(void *from, void *to, void *opaque) "from %p to %p opaque %p" -disable qemu_coroutine_yield(void *from, void *to) "from %p to %p" -disable qemu_coroutine_terminate(void *co) "self %p" +qemu_coroutine_enter(void *from, void *to, void *opaque) "from %p to %p opaque %p" +qemu_coroutine_yield(void *from, void *to) "from %p to %p" +qemu_coroutine_terminate(void *co) "self %p" # qemu-coroutine-lock.c -disable qemu_co_queue_next_bh(void) "" -disable qemu_co_queue_next(void *next) "next %p" -disable qemu_co_mutex_lock_entry(void *mutex, void *self) "mutex %p self %p" -disable qemu_co_mutex_lock_return(void *mutex, void *self) "mutex %p self %p" -disable qemu_co_mutex_unlock_entry(void *mutex, void *self) "mutex %p self %p" -disable qemu_co_mutex_unlock_return(void *mutex, void *self) "mutex %p self %p" +qemu_co_queue_next_bh(void) "" +qemu_co_queue_next(void *next) "next %p" +qemu_co_mutex_lock_entry(void *mutex, void *self) "mutex %p self %p" +qemu_co_mutex_lock_return(void *mutex, void *self) "mutex %p self %p" +qemu_co_mutex_unlock_entry(void *mutex, void *self) "mutex %p self %p" +qemu_co_mutex_unlock_return(void *mutex, void *self) "mutex %p self %p" # hw/escc.c -disable escc_put_queue(char channel, int b) "channel %c put: 0x%02x" -disable escc_get_queue(char channel, int val) "channel %c get 0x%02x" -disable escc_update_irq(int irq) "IRQ = %d" -disable escc_update_parameters(char channel, int speed, int parity, int data_bits, int stop_bits) "channel %c: speed=%d parity=%c data=%d stop=%d" -disable escc_mem_writeb_ctrl(char channel, uint32_t reg, uint32_t val) "Write channel %c, reg[%d] = %2.2x" -disable escc_mem_writeb_data(char channel, uint32_t val) "Write channel %c, ch %d" -disable escc_mem_readb_ctrl(char channel, uint32_t reg, uint8_t val) "Read channel %c, reg[%d] = %2.2x" -disable escc_mem_readb_data(char channel, uint32_t ret) "Read channel %c, ch %d" -disable escc_serial_receive_byte(char channel, int ch) "channel %c put ch %d" -disable escc_sunkbd_event_in(int ch) "Untranslated keycode %2.2x" -disable escc_sunkbd_event_out(int ch) "Translated keycode %2.2x" -disable escc_kbd_command(int val) "Command %d" -disable escc_sunmouse_event(int dx, int dy, int buttons_state) "dx=%d dy=%d buttons=%01x" +escc_put_queue(char channel, int b) "channel %c put: 0x%02x" +escc_get_queue(char channel, int val) "channel %c get 0x%02x" +escc_update_irq(int irq) "IRQ = %d" +escc_update_parameters(char channel, int speed, int parity, int data_bits, int stop_bits) "channel %c: speed=%d parity=%c data=%d stop=%d" +escc_mem_writeb_ctrl(char channel, uint32_t reg, uint32_t val) "Write channel %c, reg[%d] = %2.2x" +escc_mem_writeb_data(char channel, uint32_t val) "Write channel %c, ch %d" +escc_mem_readb_ctrl(char channel, uint32_t reg, uint8_t val) "Read channel %c, reg[%d] = %2.2x" +escc_mem_readb_data(char channel, uint32_t ret) "Read channel %c, ch %d" +escc_serial_receive_byte(char channel, int ch) "channel %c put ch %d" +escc_sunkbd_event_in(int ch) "Untranslated keycode %2.2x" +escc_sunkbd_event_out(int ch) "Translated keycode %2.2x" +escc_kbd_command(int val) "Command %d" +escc_sunmouse_event(int dx, int dy, int buttons_state) "dx=%d dy=%d buttons=%01x" diff --git a/trace/control.c b/trace/control.c new file mode 100644 index 0000000000..4c5527d20a --- /dev/null +++ b/trace/control.c @@ -0,0 +1,42 @@ +/* + * Interface for configuring and controlling the state of tracing events. + * + * Copyright (C) 2011 Lluís Vilanova <vilanova@ac.upc.edu> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + */ + +#include "trace/control.h" + + +void trace_backend_init_events(const char *fname) +{ + if (fname == NULL) { + return; + } + + FILE *fp = fopen(fname, "r"); + if (!fp) { + fprintf(stderr, "error: could not open trace events file '%s': %s\n", + fname, strerror(errno)); + exit(1); + } + char line_buf[1024]; + while (fgets(line_buf, sizeof(line_buf), fp)) { + size_t len = strlen(line_buf); + if (len > 1) { /* skip empty lines */ + line_buf[len - 1] = '\0'; + if (!trace_event_set_state(line_buf, true)) { + fprintf(stderr, + "error: trace event '%s' does not exist\n", line_buf); + exit(1); + } + } + } + if (fclose(fp) != 0) { + fprintf(stderr, "error: closing file '%s': %s\n", + fname, strerror(errno)); + exit(1); + } +} diff --git a/trace/control.h b/trace/control.h new file mode 100644 index 0000000000..2acaa4290e --- /dev/null +++ b/trace/control.h @@ -0,0 +1,41 @@ +/* + * Interface for configuring and controlling the state of tracing events. + * + * Copyright (C) 2011 Lluís Vilanova <vilanova@ac.upc.edu> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + */ + +#ifndef TRACE_CONTROL_H +#define TRACE_CONTROL_H + +#include "qemu-common.h" + + +/** Print the state of all events. */ +void trace_print_events(FILE *stream, fprintf_function stream_printf); +/** Set the state of an event. + * + * @return Whether the state changed. + */ +bool trace_event_set_state(const char *name, bool state); + + +/** Initialize the tracing backend. + * + * @events Name of file with events to be enabled at startup; may be NULL. + * Corresponds to commandline option "-trace events=...". + * @file Name of trace output file; may be NULL. + * Corresponds to commandline option "-trace file=...". + * @return Whether the backend could be successfully initialized. + */ +bool trace_backend_init(const char *events, const char *file); + +/** Generic function to initialize the state of events. + * + * @fname Name of file with events to enable; may be NULL. + */ +void trace_backend_init_events(const char *fname); + +#endif /* TRACE_CONTROL_H */ diff --git a/trace/default.c b/trace/default.c new file mode 100644 index 0000000000..c9b27a289b --- /dev/null +++ b/trace/default.c @@ -0,0 +1,41 @@ +/* + * Default implementation for backend initialization from commandline. + * + * Copyright (C) 2011 Lluís Vilanova <vilanova@ac.upc.edu> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + */ + +#include "trace/control.h" + + +void trace_print_events(FILE *stream, fprintf_function stream_printf) +{ + fprintf(stderr, "warning: " + "cannot print the trace events with the current backend\n"); + stream_printf(stream, "error: " + "operation not supported with the current backend\n"); +} + +bool trace_event_set_state(const char *name, bool state) +{ + fprintf(stderr, "warning: " + "cannot set the state of a trace event with the current backend\n"); + return false; +} + +bool trace_backend_init(const char *events, const char *file) +{ + if (events) { + fprintf(stderr, "error: -trace events=...: " + "option not supported by the selected tracing backend\n"); + return false; + } + if (file) { + fprintf(stderr, "error: -trace file=...: " + "option not supported by the selected tracing backend\n"); + return false; + } + return true; +} diff --git a/simpletrace.c b/trace/simple.c index de355e9675..a6093682dd 100644 --- a/simpletrace.c +++ b/trace/simple.c @@ -16,6 +16,7 @@ #include <pthread.h> #include "qemu-timer.h" #include "trace.h" +#include "trace/control.h" /** Trace file header event ID */ #define HEADER_EVENT_ID (~(uint64_t)0) /* avoids conflicting with TraceEventIDs */ @@ -302,7 +303,12 @@ void st_print_trace(FILE *stream, int (*stream_printf)(FILE *stream, const char } } -void st_print_trace_events(FILE *stream, int (*stream_printf)(FILE *stream, const char *fmt, ...)) +void st_flush_trace_buffer(void) +{ + flush_trace_file(true); +} + +void trace_print_events(FILE *stream, fprintf_function stream_printf) { unsigned int i; @@ -312,25 +318,20 @@ void st_print_trace_events(FILE *stream, int (*stream_printf)(FILE *stream, cons } } -bool st_change_trace_event_state(const char *name, bool enabled) +bool trace_event_set_state(const char *name, bool state) { unsigned int i; for (i = 0; i < NR_TRACE_EVENTS; i++) { if (!strcmp(trace_list[i].tp_name, name)) { - trace_list[i].state = enabled; + trace_list[i].state = state; return true; } } return false; } -void st_flush_trace_buffer(void) -{ - flush_trace_file(true); -} - -bool st_init(const char *file) +bool trace_backend_init(const char *events, const char *file) { pthread_t thread; pthread_attr_t attr; @@ -346,10 +347,12 @@ bool st_init(const char *file) pthread_sigmask(SIG_SETMASK, &oldset, NULL); if (ret != 0) { - return false; + fprintf(stderr, "warning: unable to initialize simple trace backend\n"); + } else { + atexit(st_flush_trace_buffer); + trace_backend_init_events(events); + st_set_trace_file(file); } - atexit(st_flush_trace_buffer); - st_set_trace_file(file); return true; } diff --git a/simpletrace.h b/trace/simple.h index 8d893bd849..466e75b4ff 100644 --- a/simpletrace.h +++ b/trace/simple.h @@ -8,14 +8,13 @@ * */ -#ifndef SIMPLETRACE_H -#define SIMPLETRACE_H +#ifndef TRACE_SIMPLE_H +#define TRACE_SIMPLE_H #include <stdint.h> #include <stdbool.h> #include <stdio.h> -#ifdef CONFIG_SIMPLE_TRACE typedef uint64_t TraceEventID; typedef struct { @@ -31,18 +30,9 @@ void trace4(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t void trace5(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4, uint64_t x5); void trace6(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4, uint64_t x5, uint64_t x6); void st_print_trace(FILE *stream, fprintf_function stream_printf); -void st_print_trace_events(FILE *stream, fprintf_function stream_printf); -bool st_change_trace_event_state(const char *tname, bool tstate); void st_print_trace_file_status(FILE *stream, fprintf_function stream_printf); void st_set_trace_file_enabled(bool enable); bool st_set_trace_file(const char *file); void st_flush_trace_buffer(void); -bool st_init(const char *file); -#else -static inline bool st_init(const char *file) -{ - return true; -} -#endif /* !CONFIG_SIMPLE_TRACE */ -#endif /* SIMPLETRACE_H */ +#endif /* TRACE_SIMPLE_H */ diff --git a/trace/stderr.c b/trace/stderr.c new file mode 100644 index 0000000000..7107c4a131 --- /dev/null +++ b/trace/stderr.c @@ -0,0 +1,37 @@ +#include "trace.h" +#include "trace/control.h" + + +void trace_print_events(FILE *stream, fprintf_function stream_printf) +{ + unsigned int i; + + for (i = 0; i < NR_TRACE_EVENTS; i++) { + stream_printf(stream, "%s [Event ID %u] : state %u\n", + trace_list[i].tp_name, i, trace_list[i].state); + } +} + +bool trace_event_set_state(const char *name, bool state) +{ + unsigned int i; + + for (i = 0; i < NR_TRACE_EVENTS; i++) { + if (!strcmp(trace_list[i].tp_name, name)) { + trace_list[i].state = state; + return true; + } + } + return false; +} + +bool trace_backend_init(const char *events, const char *file) +{ + if (file) { + fprintf(stderr, "error: -trace file=...: " + "option not supported by the selected tracing backend\n"); + return false; + } + trace_backend_init_events(events); + return true; +} diff --git a/trace/stderr.h b/trace/stderr.h new file mode 100644 index 0000000000..d575b613e3 --- /dev/null +++ b/trace/stderr.h @@ -0,0 +1,11 @@ +#ifndef TRACE_STDERR_H +#define TRACE_STDERR_H + +typedef uint64_t TraceEventID; + +typedef struct { + const char *tp_name; + bool state; +} TraceEvent; + +#endif /* ! TRACE_STDERR_H */ @@ -158,7 +158,7 @@ int main(int argc, char **argv) #include "slirp/libslirp.h" #include "trace.h" -#include "simpletrace.h" +#include "trace/control.h" #include "qemu-queue.h" #include "cpus.h" #include "arch_init.h" @@ -2204,7 +2204,6 @@ int main(int argc, char **argv, char **envp) int show_vnc_port = 0; #endif int defconfig = 1; - const char *trace_file = NULL; const char *log_mask = NULL; const char *log_file = NULL; GMemVTable mem_trace = { @@ -2212,6 +2211,8 @@ int main(int argc, char **argv, char **envp) .realloc = realloc_and_trace, .free = free_and_trace, }; + const char *trace_events = NULL; + const char *trace_file = NULL; atexit(qemu_run_exit_notifiers); error_set_progname(argv[0]); @@ -3002,14 +3003,16 @@ int main(int argc, char **argv, char **envp) } xen_mode = XEN_ATTACH; break; -#ifdef CONFIG_SIMPLE_TRACE case QEMU_OPTION_trace: + { opts = qemu_opts_parse(qemu_find_opts("trace"), optarg, 0); - if (opts) { - trace_file = qemu_opt_get(opts, "file"); + if (!opts) { + exit(1); } + trace_events = qemu_opt_get(opts, "events"); + trace_file = qemu_opt_get(opts, "file"); break; -#endif + } case QEMU_OPTION_readconfig: { int ret = qemu_read_config_file(optarg); @@ -3067,8 +3070,8 @@ int main(int argc, char **argv, char **envp) set_cpu_log(log_mask); } - if (!st_init(trace_file)) { - fprintf(stderr, "warning: unable to initialize simple trace backend\n"); + if (!trace_backend_init(trace_events, trace_file)) { + exit(1); } /* If no data_dir is specified then try to find it relative to the |