aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--hw/a9mpcore.c13
-rw-r--r--hw/arm11mpcore.c17
-rw-r--r--hw/arm_gic.c68
-rw-r--r--hw/armv7m_nvic.c31
-rw-r--r--hw/realview_gic.c7
5 files changed, 87 insertions, 49 deletions
diff --git a/hw/a9mpcore.c b/hw/a9mpcore.c
index 3ef0e138c4..521b8cc784 100644
--- a/hw/a9mpcore.c
+++ b/hw/a9mpcore.c
@@ -11,9 +11,8 @@
#include "sysbus.h"
/* Configuration for arm_gic.c:
- * number of external IRQ lines, max number of CPUs, how to ID current CPU
+ * max number of CPUs, how to ID current CPU
*/
-#define GIC_NIRQ 96
#define NCPU 4
static inline int
@@ -37,6 +36,7 @@ typedef struct a9mp_priv_state {
MemoryRegion ptimer_iomem;
MemoryRegion container;
DeviceState *mptimer;
+ uint32_t num_irq;
} a9mp_priv_state;
static uint64_t a9_scu_read(void *opaque, target_phys_addr_t offset,
@@ -153,7 +153,7 @@ static int a9mp_priv_init(SysBusDevice *dev)
hw_error("a9mp_priv_init: num-cpu may not be more than %d\n", NCPU);
}
- gic_init(&s->gic, s->num_cpu);
+ gic_init(&s->gic, s->num_cpu, s->num_irq);
s->mptimer = qdev_create(NULL, "arm_mptimer");
qdev_prop_set_uint32(s->mptimer, "num-cpu", s->num_cpu);
@@ -216,6 +216,13 @@ static SysBusDeviceInfo a9mp_priv_info = {
.qdev.reset = a9mp_priv_reset,
.qdev.props = (Property[]) {
DEFINE_PROP_UINT32("num-cpu", a9mp_priv_state, num_cpu, 1),
+ /* The Cortex-A9MP may have anything from 0 to 224 external interrupt
+ * IRQ lines (with another 32 internal). We default to 64+32, which
+ * is the number provided by the Cortex-A9MP test chip in the
+ * Realview PBX-A9 and Versatile Express A9 development boards.
+ * Other boards may differ and should set this property appropriately.
+ */
+ DEFINE_PROP_UINT32("num-irq", a9mp_priv_state, num_irq, 96),
DEFINE_PROP_END_OF_LIST(),
}
};
diff --git a/hw/arm11mpcore.c b/hw/arm11mpcore.c
index bc0457e58b..f4d88dca7c 100644
--- a/hw/arm11mpcore.c
+++ b/hw/arm11mpcore.c
@@ -10,11 +10,6 @@
#include "sysbus.h"
#include "qemu-timer.h"
-/* ??? The MPCore TRM says the on-chip controller has 224 external IRQ lines
- (+ 32 internal). However my test chip only exposes/reports 32.
- More importantly Linux falls over if more than 32 are present! */
-#define GIC_NIRQ 64
-
#define NCPU 4
static inline int
@@ -37,6 +32,7 @@ typedef struct mpcore_priv_state {
MemoryRegion iomem;
MemoryRegion container;
DeviceState *mptimer;
+ uint32_t num_irq;
} mpcore_priv_state;
/* Per-CPU private memory mapped IO. */
@@ -132,7 +128,7 @@ static int mpcore_priv_init(SysBusDevice *dev)
{
mpcore_priv_state *s = FROM_SYSBUSGIC(mpcore_priv_state, dev);
- gic_init(&s->gic, s->num_cpu);
+ gic_init(&s->gic, s->num_cpu, s->num_irq);
s->mptimer = qdev_create(NULL, "arm_mptimer");
qdev_prop_set_uint32(s->mptimer, "num-cpu", s->num_cpu);
qdev_init_nofail(s->mptimer);
@@ -221,6 +217,15 @@ static SysBusDeviceInfo mpcore_priv_info = {
.qdev.size = sizeof(mpcore_priv_state),
.qdev.props = (Property[]) {
DEFINE_PROP_UINT32("num-cpu", mpcore_priv_state, num_cpu, 1),
+ /* The ARM11 MPCORE TRM says the on-chip controller may have
+ * anything from 0 to 224 external interrupt IRQ lines (with another
+ * 32 internal). We default to 32+32, which is the number provided by
+ * the ARM11 MPCore test chip in the Realview Versatile Express
+ * coretile. Other boards may differ and should set this property
+ * appropriately. Some Linux kernels may not boot if the hardware
+ * has more IRQ lines than the kernel expects.
+ */
+ DEFINE_PROP_UINT32("num-irq", mpcore_priv_state, num_irq, 64),
DEFINE_PROP_END_OF_LIST(),
}
};
diff --git a/hw/arm_gic.c b/hw/arm_gic.c
index 0339cf59fb..cf582a5a14 100644
--- a/hw/arm_gic.c
+++ b/hw/arm_gic.c
@@ -11,6 +11,8 @@
controller, MPCore distributed interrupt controller and ARMv7-M
Nested Vectored Interrupt Controller. */
+/* Maximum number of possible interrupts, determined by the GIC architecture */
+#define GIC_MAXIRQ 1020
//#define DEBUG_GIC
#ifdef DEBUG_GIC
@@ -86,13 +88,13 @@ typedef struct gic_state
int enabled;
int cpu_enabled[NCPU];
- gic_irq_state irq_state[GIC_NIRQ];
+ gic_irq_state irq_state[GIC_MAXIRQ];
#ifndef NVIC
- int irq_target[GIC_NIRQ];
+ int irq_target[GIC_MAXIRQ];
#endif
int priority1[32][NCPU];
- int priority2[GIC_NIRQ - 32];
- int last_active[GIC_NIRQ][NCPU];
+ int priority2[GIC_MAXIRQ - 32];
+ int last_active[GIC_MAXIRQ][NCPU];
int priority_mask[NCPU];
int running_irq[NCPU];
@@ -111,6 +113,7 @@ typedef struct gic_state
struct gic_state *backref[NCPU];
MemoryRegion cpuiomem[NCPU+1]; /* CPU interfaces */
#endif
+ uint32_t num_irq;
} gic_state;
/* TODO: Many places that call this routine could be optimized. */
@@ -133,7 +136,7 @@ static void gic_update(gic_state *s)
}
best_prio = 0x100;
best_irq = 1023;
- for (irq = 0; irq < GIC_NIRQ; irq++) {
+ for (irq = 0; irq < s->num_irq; irq++) {
if (GIC_TEST_ENABLED(irq, cm) && GIC_TEST_PENDING(irq, cm)) {
if (GIC_GET_PRIORITY(irq, cpu) < best_prio) {
best_prio = GIC_GET_PRIORITY(irq, cpu);
@@ -222,7 +225,7 @@ static void gic_complete_irq(gic_state * s, int cpu, int irq)
int update = 0;
int cm = 1 << cpu;
DPRINTF("EOI %d\n", irq);
- if (irq >= GIC_NIRQ) {
+ if (irq >= s->num_irq) {
/* This handles two cases:
* 1. If software writes the ID of a spurious interrupt [ie 1023]
* to the GICC_EOIR, the GIC ignores that write.
@@ -279,7 +282,7 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
if (offset == 0)
return s->enabled;
if (offset == 4)
- return ((GIC_NIRQ / 32) - 1) | ((NUM_CPU(s) - 1) << 5);
+ return ((s->num_irq / 32) - 1) | ((NUM_CPU(s) - 1) << 5);
if (offset < 0x08)
return 0;
if (offset >= 0x80) {
@@ -295,7 +298,7 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
else
irq = (offset - 0x180) * 8;
irq += GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
res = 0;
for (i = 0; i < 8; i++) {
@@ -310,7 +313,7 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
else
irq = (offset - 0x280) * 8;
irq += GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
res = 0;
mask = (irq < 32) ? cm : ALL_CPU_MASK;
@@ -322,7 +325,7 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
} else if (offset < 0x400) {
/* Interrupt Active. */
irq = (offset - 0x300) * 8 + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
res = 0;
mask = (irq < 32) ? cm : ALL_CPU_MASK;
@@ -334,14 +337,14 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
} else if (offset < 0x800) {
/* Interrupt Priority. */
irq = (offset - 0x400) + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
res = GIC_GET_PRIORITY(irq, cpu);
#ifndef NVIC
} else if (offset < 0xc00) {
/* Interrupt CPU Target. */
irq = (offset - 0x800) + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
if (irq >= 29 && irq <= 31) {
res = cm;
@@ -351,7 +354,7 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
} else if (offset < 0xf00) {
/* Interrupt Configuration. */
irq = (offset - 0xc00) * 2 + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
res = 0;
for (i = 0; i < 4; i++) {
@@ -426,7 +429,7 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
} else if (offset < 0x180) {
/* Interrupt Set Enable. */
irq = (offset - 0x100) * 8 + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
if (irq < 16)
value = 0xff;
@@ -451,7 +454,7 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
} else if (offset < 0x200) {
/* Interrupt Clear Enable. */
irq = (offset - 0x180) * 8 + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
if (irq < 16)
value = 0;
@@ -468,7 +471,7 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
} else if (offset < 0x280) {
/* Interrupt Set Pending. */
irq = (offset - 0x200) * 8 + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
if (irq < 16)
irq = 0;
@@ -481,7 +484,7 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
} else if (offset < 0x300) {
/* Interrupt Clear Pending. */
irq = (offset - 0x280) * 8 + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
for (i = 0; i < 8; i++) {
/* ??? This currently clears the pending bit for all CPUs, even
@@ -497,7 +500,7 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
} else if (offset < 0x800) {
/* Interrupt Priority. */
irq = (offset - 0x400) + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
if (irq < 32) {
s->priority1[irq][cpu] = value;
@@ -508,7 +511,7 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
} else if (offset < 0xc00) {
/* Interrupt CPU Target. */
irq = (offset - 0x800) + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
if (irq < 29)
value = 0;
@@ -518,7 +521,7 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
} else if (offset < 0xf00) {
/* Interrupt Configuration. */
irq = (offset - 0xc00) * 4 + GIC_BASE_IRQ;
- if (irq >= GIC_NIRQ)
+ if (irq >= s->num_irq)
goto bad_reg;
if (irq < 32)
value |= 0xaa;
@@ -699,7 +702,7 @@ static const MemoryRegionOps gic_cpu_ops = {
static void gic_reset(gic_state *s)
{
int i;
- memset(s->irq_state, 0, GIC_NIRQ * sizeof(gic_irq_state));
+ memset(s->irq_state, 0, GIC_MAXIRQ * sizeof(gic_irq_state));
for (i = 0 ; i < NUM_CPU(s); i++) {
s->priority_mask[i] = 0xf0;
s->current_pending[i] = 1023;
@@ -735,17 +738,17 @@ static void gic_save(QEMUFile *f, void *opaque)
qemu_put_be32(f, s->cpu_enabled[i]);
for (j = 0; j < 32; j++)
qemu_put_be32(f, s->priority1[j][i]);
- for (j = 0; j < GIC_NIRQ; j++)
+ for (j = 0; j < s->num_irq; j++)
qemu_put_be32(f, s->last_active[j][i]);
qemu_put_be32(f, s->priority_mask[i]);
qemu_put_be32(f, s->running_irq[i]);
qemu_put_be32(f, s->running_priority[i]);
qemu_put_be32(f, s->current_pending[i]);
}
- for (i = 0; i < GIC_NIRQ - 32; i++) {
+ for (i = 0; i < s->num_irq - 32; i++) {
qemu_put_be32(f, s->priority2[i]);
}
- for (i = 0; i < GIC_NIRQ; i++) {
+ for (i = 0; i < s->num_irq; i++) {
#ifndef NVIC
qemu_put_be32(f, s->irq_target[i]);
#endif
@@ -772,17 +775,17 @@ static int gic_load(QEMUFile *f, void *opaque, int version_id)
s->cpu_enabled[i] = qemu_get_be32(f);
for (j = 0; j < 32; j++)
s->priority1[j][i] = qemu_get_be32(f);
- for (j = 0; j < GIC_NIRQ; j++)
+ for (j = 0; j < s->num_irq; j++)
s->last_active[j][i] = qemu_get_be32(f);
s->priority_mask[i] = qemu_get_be32(f);
s->running_irq[i] = qemu_get_be32(f);
s->running_priority[i] = qemu_get_be32(f);
s->current_pending[i] = qemu_get_be32(f);
}
- for (i = 0; i < GIC_NIRQ - 32; i++) {
+ for (i = 0; i < s->num_irq - 32; i++) {
s->priority2[i] = qemu_get_be32(f);
}
- for (i = 0; i < GIC_NIRQ; i++) {
+ for (i = 0; i < s->num_irq; i++) {
#ifndef NVIC
s->irq_target[i] = qemu_get_be32(f);
#endif
@@ -798,9 +801,9 @@ static int gic_load(QEMUFile *f, void *opaque, int version_id)
}
#if NCPU > 1
-static void gic_init(gic_state *s, int num_cpu)
+static void gic_init(gic_state *s, int num_cpu, int num_irq)
#else
-static void gic_init(gic_state *s)
+static void gic_init(gic_state *s, int num_irq)
#endif
{
int i;
@@ -808,7 +811,12 @@ static void gic_init(gic_state *s)
#if NCPU > 1
s->num_cpu = num_cpu;
#endif
- qdev_init_gpio_in(&s->busdev.qdev, gic_set_irq, GIC_NIRQ - 32);
+ s->num_irq = num_irq + GIC_BASE_IRQ;
+ if (s->num_irq > GIC_MAXIRQ) {
+ hw_error("requested %u interrupt lines exceeds GIC maximum %d\n",
+ num_irq, GIC_MAXIRQ);
+ }
+ qdev_init_gpio_in(&s->busdev.qdev, gic_set_irq, s->num_irq - 32);
for (i = 0; i < NUM_CPU(s); i++) {
sysbus_init_irq(&s->busdev, &s->parent_irq[i]);
}
diff --git a/hw/armv7m_nvic.c b/hw/armv7m_nvic.c
index bf8c3c50dc..28f36ba525 100644
--- a/hw/armv7m_nvic.c
+++ b/hw/armv7m_nvic.c
@@ -15,9 +15,6 @@
#include "arm-misc.h"
#include "exec-memory.h"
-/* 32 internal lines (16 used for system exceptions) plus 64 external
- interrupt lines. */
-#define GIC_NIRQ 96
#define NCPU 1
#define NVIC 1
@@ -41,6 +38,7 @@ typedef struct {
int64_t tick;
QEMUTimer *timer;
} systick;
+ uint32_t num_irq;
} nvic_state;
/* qemu timers run at 1GHz. We want something closer to 1MHz. */
@@ -125,7 +123,7 @@ static uint32_t nvic_readl(void *opaque, uint32_t offset)
switch (offset) {
case 4: /* Interrupt Control Type. */
- return (GIC_NIRQ / 32) - 1;
+ return (s->num_irq / 32) - 1;
case 0x10: /* SysTick Control and Status. */
val = s->systick.control;
s->systick.control &= ~SYSTICK_COUNTFLAG;
@@ -169,7 +167,7 @@ static uint32_t nvic_readl(void *opaque, uint32_t offset)
if (s->gic.current_pending[0] != 1023)
val |= (s->gic.current_pending[0] << 12);
/* ISRPENDING */
- for (irq = 32; irq < GIC_NIRQ; irq++) {
+ for (irq = 32; irq < s->num_irq; irq++) {
if (s->gic.irq_state[irq].pending) {
val |= (1 << 22);
break;
@@ -384,16 +382,33 @@ static int armv7m_nvic_init(SysBusDevice *dev)
{
nvic_state *s= FROM_SYSBUSGIC(nvic_state, dev);
- gic_init(&s->gic);
+ /* note that for the M profile gic_init() takes the number of external
+ * interrupt lines only.
+ */
+ gic_init(&s->gic, s->num_irq);
memory_region_add_subregion(get_system_memory(), 0xe000e000, &s->gic.iomem);
s->systick.timer = qemu_new_timer_ns(vm_clock, systick_timer_tick, s);
- vmstate_register(&dev->qdev, -1, &vmstate_nvic, s);
return 0;
}
+static SysBusDeviceInfo armv7m_nvic_priv_info = {
+ .init = armv7m_nvic_init,
+ .qdev.name = "armv7m_nvic",
+ .qdev.size = sizeof(nvic_state),
+ .qdev.vmsd = &vmstate_nvic,
+ .qdev.props = (Property[]) {
+ /* The ARM v7m may have anything from 0 to 496 external interrupt
+ * IRQ lines. We default to 64. Other boards may differ and should
+ * set this property appropriately.
+ */
+ DEFINE_PROP_UINT32("num-irq", nvic_state, num_irq, 64),
+ DEFINE_PROP_END_OF_LIST(),
+ }
+};
+
static void armv7m_nvic_register_devices(void)
{
- sysbus_register_dev("armv7m_nvic", sizeof(nvic_state), armv7m_nvic_init);
+ sysbus_register_withprop(&armv7m_nvic_priv_info);
}
device_init(armv7m_nvic_register_devices)
diff --git a/hw/realview_gic.c b/hw/realview_gic.c
index 8c4d509ee7..7342edef69 100644
--- a/hw/realview_gic.c
+++ b/hw/realview_gic.c
@@ -9,7 +9,6 @@
#include "sysbus.h"
-#define GIC_NIRQ 96
#define NCPU 1
/* Only a single "CPU" interface is present. */
@@ -37,7 +36,11 @@ static int realview_gic_init(SysBusDevice *dev)
{
RealViewGICState *s = FROM_SYSBUSGIC(RealViewGICState, dev);
- gic_init(&s->gic);
+ /* The GICs on the RealView boards have a fixed nonconfigurable
+ * number of interrupt lines, so we don't need to expose this as
+ * a qdev property.
+ */
+ gic_init(&s->gic, 96);
realview_gic_map_setup(s);
sysbus_init_mmio(dev, &s->container);
return 0;
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 13:18:54 +0000