diff options
-rw-r--r-- | hw/ide.c | 157 |
1 files changed, 137 insertions, 20 deletions
@@ -307,14 +307,24 @@ typedef struct IDEState { /* ide regs */ uint8_t feature; uint8_t error; - uint16_t nsector; /* 0 is 256 to ease computations */ + uint32_t nsector; uint8_t sector; uint8_t lcyl; uint8_t hcyl; + /* other part of tf for lba48 support */ + uint8_t hob_feature; + uint8_t hob_nsector; + uint8_t hob_sector; + uint8_t hob_lcyl; + uint8_t hob_hcyl; + uint8_t select; uint8_t status; + /* 0x3f6 command, only meaningful for drive 0 */ uint8_t cmd; + /* set for lba48 access */ + uint8_t lba48; /* depends on bit 4 in select, only meaningful for drive 0 */ struct IDEState *cur_drive; BlockDriverState *bs; @@ -463,13 +473,19 @@ static void ide_identify(IDEState *s) put_le16(p + 80, 0xf0); /* ata3 -> ata6 supported */ put_le16(p + 81, 0x16); /* conforms to ata5 */ put_le16(p + 82, (1 << 14)); - put_le16(p + 83, (1 << 14)); + /* 13=flush_cache_ext,12=flush_cache,10=lba48 */ + put_le16(p + 83, (1 << 14) | (1 << 13) | (1 <<12) | (1 << 10)); put_le16(p + 84, (1 << 14)); put_le16(p + 85, (1 << 14)); - put_le16(p + 86, 0); + /* 13=flush_cache_ext,12=flush_cache,10=lba48 */ + put_le16(p + 86, (1 << 14) | (1 << 13) | (1 <<12) | (1 << 10)); put_le16(p + 87, (1 << 14)); put_le16(p + 88, 0x3f | (1 << 13)); /* udma5 set and supported */ put_le16(p + 93, 1 | (1 << 14) | 0x2000); + put_le16(p + 100, s->nb_sectors); + put_le16(p + 101, s->nb_sectors >> 16); + put_le16(p + 102, s->nb_sectors >> 32); + put_le16(p + 103, s->nb_sectors >> 48); memcpy(s->identify_data, p, sizeof(s->identify_data)); s->identify_set = 1; @@ -573,12 +589,19 @@ static int64_t ide_get_sector(IDEState *s) int64_t sector_num; if (s->select & 0x40) { /* lba */ - sector_num = ((s->select & 0x0f) << 24) | (s->hcyl << 16) | - (s->lcyl << 8) | s->sector; + if (!s->lba48) { + sector_num = ((s->select & 0x0f) << 24) | (s->hcyl << 16) | + (s->lcyl << 8) | s->sector; + } else { + sector_num = ((int64_t)s->hob_hcyl << 40) | + ((int64_t) s->hob_lcyl << 32) | + ((int64_t) s->hob_sector << 24) | + ((int64_t) s->hcyl << 16) | + ((int64_t) s->lcyl << 8) | s->sector; + } } else { sector_num = ((s->hcyl << 8) | s->lcyl) * s->heads * s->sectors + - (s->select & 0x0f) * s->sectors + - (s->sector - 1); + (s->select & 0x0f) * s->sectors + (s->sector - 1); } return sector_num; } @@ -587,10 +610,19 @@ static void ide_set_sector(IDEState *s, int64_t sector_num) { unsigned int cyl, r; if (s->select & 0x40) { - s->select = (s->select & 0xf0) | (sector_num >> 24); - s->hcyl = (sector_num >> 16); - s->lcyl = (sector_num >> 8); - s->sector = (sector_num); + if (!s->lba48) { + s->select = (s->select & 0xf0) | (sector_num >> 24); + s->hcyl = (sector_num >> 16); + s->lcyl = (sector_num >> 8); + s->sector = (sector_num); + } else { + s->sector = sector_num; + s->lcyl = sector_num >> 8; + s->hcyl = sector_num >> 16; + s->hob_sector = sector_num >> 24; + s->hob_lcyl = sector_num >> 32; + s->hob_hcyl = sector_num >> 40; + } } else { cyl = sector_num / (s->heads * s->sectors); r = sector_num % (s->heads * s->sectors); @@ -1488,43 +1520,89 @@ static void cdrom_change_cb(void *opaque) s->nb_sectors = nb_sectors; } +static void ide_cmd_lba48_transform(IDEState *s, int lba48) +{ + s->lba48 = lba48; + + /* handle the 'magic' 0 nsector count conversion here. to avoid + * fiddling with the rest of the read logic, we just store the + * full sector count in ->nsector and ignore ->hob_nsector from now + */ + if (!s->lba48) { + if (!s->nsector) + s->nsector = 256; + } else { + if (!s->nsector && !s->hob_nsector) + s->nsector = 65536; + else { + int lo = s->nsector; + int hi = s->hob_nsector; + + s->nsector = (hi << 8) | lo; + } + } +} + +static void ide_clear_hob(IDEState *ide_if) +{ + /* any write clears HOB high bit of device control register */ + ide_if[0].select &= ~(1 << 7); + ide_if[1].select &= ~(1 << 7); +} + static void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val) { IDEState *ide_if = opaque; IDEState *s; int unit, n; + int lba48 = 0; #ifdef DEBUG_IDE printf("IDE: write addr=0x%x val=0x%02x\n", addr, val); #endif + addr &= 7; switch(addr) { case 0: break; case 1: + ide_clear_hob(ide_if); /* NOTE: data is written to the two drives */ + ide_if[0].hob_feature = ide_if[0].feature; + ide_if[1].hob_feature = ide_if[1].feature; ide_if[0].feature = val; ide_if[1].feature = val; break; case 2: - if (val == 0) - val = 256; + ide_clear_hob(ide_if); + ide_if[0].hob_nsector = ide_if[0].nsector; + ide_if[1].hob_nsector = ide_if[1].nsector; ide_if[0].nsector = val; ide_if[1].nsector = val; break; case 3: + ide_clear_hob(ide_if); + ide_if[0].hob_sector = ide_if[0].sector; + ide_if[1].hob_sector = ide_if[1].sector; ide_if[0].sector = val; ide_if[1].sector = val; break; case 4: + ide_clear_hob(ide_if); + ide_if[0].hob_lcyl = ide_if[0].lcyl; + ide_if[1].hob_lcyl = ide_if[1].lcyl; ide_if[0].lcyl = val; ide_if[1].lcyl = val; break; case 5: + ide_clear_hob(ide_if); + ide_if[0].hob_hcyl = ide_if[0].hcyl; + ide_if[1].hob_hcyl = ide_if[1].hcyl; ide_if[0].hcyl = val; ide_if[1].hcyl = val; break; case 6: + /* FIXME: HOB readback uses bit 7 */ ide_if[0].select = (val & ~0x10) | 0xa0; ide_if[1].select = (val | 0x10) | 0xa0; /* select drive */ @@ -1542,6 +1620,7 @@ static void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val) /* ignore commands to non existant slave */ if (s != ide_if && !s->bs) break; + switch(val) { case WIN_IDENTIFY: if (s->bs && !s->is_cdrom) { @@ -1573,35 +1652,50 @@ static void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val) } ide_set_irq(s); break; + case WIN_VERIFY_EXT: + lba48 = 1; case WIN_VERIFY: case WIN_VERIFY_ONCE: /* do sector number check ? */ + ide_cmd_lba48_transform(s, lba48); s->status = READY_STAT; ide_set_irq(s); break; + case WIN_READ_EXT: + lba48 = 1; case WIN_READ: case WIN_READ_ONCE: if (!s->bs) goto abort_cmd; + ide_cmd_lba48_transform(s, lba48); s->req_nb_sectors = 1; ide_sector_read(s); break; + case WIN_WRITE_EXT: + lba48 = 1; case WIN_WRITE: case WIN_WRITE_ONCE: + ide_cmd_lba48_transform(s, lba48); s->error = 0; s->status = SEEK_STAT | READY_STAT; s->req_nb_sectors = 1; ide_transfer_start(s, s->io_buffer, 512, ide_sector_write); break; + case WIN_MULTREAD_EXT: + lba48 = 1; case WIN_MULTREAD: if (!s->mult_sectors) goto abort_cmd; + ide_cmd_lba48_transform(s, lba48); s->req_nb_sectors = s->mult_sectors; ide_sector_read(s); break; + case WIN_MULTWRITE_EXT: + lba48 = 1; case WIN_MULTWRITE: if (!s->mult_sectors) goto abort_cmd; + ide_cmd_lba48_transform(s, lba48); s->error = 0; s->status = SEEK_STAT | READY_STAT; s->req_nb_sectors = s->mult_sectors; @@ -1610,19 +1704,28 @@ static void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val) n = s->req_nb_sectors; ide_transfer_start(s, s->io_buffer, 512 * n, ide_sector_write); break; + case WIN_READDMA_EXT: + lba48 = 1; case WIN_READDMA: case WIN_READDMA_ONCE: if (!s->bs) goto abort_cmd; + ide_cmd_lba48_transform(s, lba48); ide_sector_read_dma(s); break; + case WIN_WRITEDMA_EXT: + lba48 = 1; case WIN_WRITEDMA: case WIN_WRITEDMA_ONCE: if (!s->bs) goto abort_cmd; + ide_cmd_lba48_transform(s, lba48); ide_sector_write_dma(s); break; + case WIN_READ_NATIVE_MAX_EXT: + lba48 = 1; case WIN_READ_NATIVE_MAX: + ide_cmd_lba48_transform(s, lba48); ide_set_sector(s, s->nb_sectors - 1); s->status = READY_STAT; ide_set_irq(s); @@ -1672,9 +1775,10 @@ static void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val) goto abort_cmd; } break; + case WIN_FLUSH_CACHE: + case WIN_FLUSH_CACHE_EXT: case WIN_STANDBYNOW1: case WIN_IDLEIMMEDIATE: - case WIN_FLUSH_CACHE: s->status = READY_STAT; ide_set_irq(s); break; @@ -1726,9 +1830,12 @@ static uint32_t ide_ioport_read(void *opaque, uint32_t addr1) IDEState *ide_if = opaque; IDEState *s = ide_if->cur_drive; uint32_t addr; - int ret; + int ret, hob; addr = addr1 & 7; + /* FIXME: HOB readback uses bit 7, but it's always set right now */ + //hob = s->select & (1 << 7); + hob = 0; switch(addr) { case 0: ret = 0xff; @@ -1736,32 +1843,42 @@ static uint32_t ide_ioport_read(void *opaque, uint32_t addr1) case 1: if (!ide_if[0].bs && !ide_if[1].bs) ret = 0; - else + else if (!hob) ret = s->error; + else + ret = s->hob_feature; break; case 2: if (!ide_if[0].bs && !ide_if[1].bs) ret = 0; - else + else if (!hob) ret = s->nsector & 0xff; + else + ret = s->hob_nsector; break; case 3: if (!ide_if[0].bs && !ide_if[1].bs) ret = 0; - else + else if (!hob) ret = s->sector; + else + ret = s->hob_sector; break; case 4: if (!ide_if[0].bs && !ide_if[1].bs) ret = 0; - else + else if (!hob) ret = s->lcyl; + else + ret = s->hob_lcyl; break; case 5: if (!ide_if[0].bs && !ide_if[1].bs) ret = 0; - else + else if (!hob) ret = s->hcyl; + else + ret = s->hob_hcyl; break; case 6: if (!ide_if[0].bs && !ide_if[1].bs) |