diff options
| -rw-r--r-- | Makefile.target | 3 | ||||
| -rw-r--r-- | hw/pc.c | 21 | ||||
| -rw-r--r-- | hw/usb-hid.c | 347 | ||||
| -rw-r--r-- | hw/usb.h | 10 |
4 files changed, 373 insertions, 8 deletions
diff --git a/Makefile.target b/Makefile.target index 56b7036a5d..cefad74038 100644 --- a/Makefile.target +++ b/Makefile.target @@ -294,7 +294,8 @@ ifeq ($(TARGET_BASE_ARCH), i386) # Hardware support VL_OBJS+= ide.o ne2000.o pckbd.o vga.o $(SOUND_HW) dma.o $(AUDIODRV) VL_OBJS+= fdc.o mc146818rtc.o serial.o i8259.o i8254.o pc.o -VL_OBJS+= cirrus_vga.o mixeng.o apic.o parallel.o usb.o usb-uhci.o usb-linux.o +VL_OBJS+= cirrus_vga.o mixeng.o apic.o parallel.o +VL_OBJS+= usb.o usb-uhci.o usb-linux.o usb-hid.o DEFINES += -DHAS_AUDIO endif ifeq ($(TARGET_BASE_ARCH), ppc) @@ -622,24 +622,31 @@ static void pc_init1(int ram_size, int vga_ram_size, int boot_device, if (pci_enabled && usb_enabled) { USBPort *usb_root_ports[2]; - USBDevice *usb_hub; + USBDevice *usb_dev; usb_uhci_init(pci_bus, usb_root_ports); #if 0 { USBPort *usb_hub1_ports[4]; USBPort *usb_hub2_ports[2]; /* test: we simulate a USB hub */ - usb_hub = usb_hub_init(usb_hub1_ports, 4); - usb_attach(usb_root_ports[0], usb_hub); + usb_dev = usb_hub_init(usb_hub1_ports, 4); + usb_attach(usb_root_ports[0], usb_dev); /* test: we simulate a USB hub */ - usb_hub = usb_hub_init(usb_hub2_ports, 2); - usb_attach(usb_hub1_ports[0], usb_hub); + usb_dev = usb_hub_init(usb_hub2_ports, 2); + usb_attach(usb_hub1_ports[0], usb_dev); } #endif +#if 0 + /* USB mouse */ + usb_dev = usb_mouse_init(); + usb_attach(usb_root_ports[0], usb_dev); +#endif +#if 1 /* simulated hub with the host USB devices connected to it */ - usb_hub = usb_host_hub_init(); - usb_attach(usb_root_ports[0], usb_hub); + usb_dev = usb_host_hub_init(); + usb_attach(usb_root_ports[0], usb_dev); +#endif } /* must be done after all PCI devices are instanciated */ diff --git a/hw/usb-hid.c b/hw/usb-hid.c new file mode 100644 index 0000000000..6f9ee827d8 --- /dev/null +++ b/hw/usb-hid.c @@ -0,0 +1,347 @@ +/* + * QEMU USB HID devices + * + * Copyright (c) 2005 Fabrice Bellard + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#include "vl.h" + +/* HID interface requests */ +#define GET_REPORT 0xa101 +#define GET_IDLE 0xa102 +#define GET_PROTOCOL 0xa103 +#define SET_IDLE 0x210a +#define SET_PROTOCOL 0x210b + +typedef struct USBMouseState { + USBDevice dev; + int dx, dy, dz, buttons_state; +} USBMouseState; + +/* mostly the same values as the Bochs USB Mouse device */ +static const uint8_t qemu_mouse_dev_descriptor[] = { + 0x12, /* u8 bLength; */ + 0x01, /* u8 bDescriptorType; Device */ + 0x10, 0x00, /* u16 bcdUSB; v1.0 */ + + 0x00, /* u8 bDeviceClass; */ + 0x00, /* u8 bDeviceSubClass; */ + 0x00, /* u8 bDeviceProtocol; [ low/full speeds only ] */ + 0x08, /* u8 bMaxPacketSize0; 8 Bytes */ + + 0x27, 0x06, /* u16 idVendor; */ + 0x01, 0x00, /* u16 idProduct; */ + 0x00, 0x00, /* u16 bcdDevice */ + + 0x03, /* u8 iManufacturer; */ + 0x02, /* u8 iProduct; */ + 0x01, /* u8 iSerialNumber; */ + 0x01 /* u8 bNumConfigurations; */ +}; + +static const uint8_t qemu_mouse_config_descriptor[] = { + /* one configuration */ + 0x09, /* u8 bLength; */ + 0x02, /* u8 bDescriptorType; Configuration */ + 0x22, 0x00, /* u16 wTotalLength; */ + 0x01, /* u8 bNumInterfaces; (1) */ + 0x01, /* u8 bConfigurationValue; */ + 0x04, /* u8 iConfiguration; */ + 0xa0, /* u8 bmAttributes; + Bit 7: must be set, + 6: Self-powered, + 5: Remote wakeup, + 4..0: resvd */ + 50, /* u8 MaxPower; */ + + /* USB 1.1: + * USB 2.0, single TT organization (mandatory): + * one interface, protocol 0 + * + * USB 2.0, multiple TT organization (optional): + * two interfaces, protocols 1 (like single TT) + * and 2 (multiple TT mode) ... config is + * sometimes settable + * NOT IMPLEMENTED + */ + + /* one interface */ + 0x09, /* u8 if_bLength; */ + 0x04, /* u8 if_bDescriptorType; Interface */ + 0x00, /* u8 if_bInterfaceNumber; */ + 0x00, /* u8 if_bAlternateSetting; */ + 0x01, /* u8 if_bNumEndpoints; */ + 0x03, /* u8 if_bInterfaceClass; */ + 0x01, /* u8 if_bInterfaceSubClass; */ + 0x02, /* u8 if_bInterfaceProtocol; [usb1.1 or single tt] */ + 0x05, /* u8 if_iInterface; */ + + /* one endpoint (status change endpoint) */ + 0x07, /* u8 ep_bLength; */ + 0x05, /* u8 ep_bDescriptorType; Endpoint */ + 0x81, /* u8 ep_bEndpointAddress; IN Endpoint 1 */ + 0x03, /* u8 ep_bmAttributes; Interrupt */ + 0x03, 0x00, /* u16 ep_wMaxPacketSize; */ + 0x0a, /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */ + + /* HID descriptor */ + 0x09, /* u8 bLength; */ + 0x21, /* u8 bDescriptorType; */ + 0x01, 0x00, /* u16 HID_class */ + 0x00, /* u8 country_code */ + 0x01, /* u8 num_descriptors */ + 0x22, /* u8 type; Report */ + 50, 0, /* u16 len */ +}; + +static const uint8_t qemu_mouse_hid_report_descriptor[] = { + 0x05, 0x01, 0x09, 0x02, 0xA1, 0x01, 0x09, 0x01, + 0xA1, 0x00, 0x05, 0x09, 0x19, 0x01, 0x29, 0x03, + 0x15, 0x00, 0x25, 0x01, 0x95, 0x03, 0x75, 0x01, + 0x81, 0x02, 0x95, 0x01, 0x75, 0x05, 0x81, 0x01, + 0x05, 0x01, 0x09, 0x30, 0x09, 0x31, 0x15, 0x81, + 0x25, 0x7F, 0x75, 0x08, 0x95, 0x02, 0x81, 0x06, + 0xC0, 0xC0, +}; + +static void usb_mouse_event(void *opaque, + int dx1, int dy1, int dz1, int buttons_state) +{ + USBMouseState *s = opaque; + + s->dx += dx1; + s->dy += dy1; + s->dz += dz1; + s->buttons_state = buttons_state; +} + +static inline int int_clamp(int val, int vmin, int vmax) +{ + if (val < vmin) + return vmin; + else if (val > vmax) + return vmax; + else + return val; +} + +static int usb_mouse_poll(USBMouseState *s, uint8_t *buf, int len) +{ + int dx, dy, dz, b, l; + + dx = int_clamp(s->dx, -128, 127); + dy = int_clamp(s->dy, -128, 127); + dz = int_clamp(s->dz, -128, 127); + + s->dx -= dx; + s->dy -= dy; + s->dz -= dz; + + b = 0; + if (s->buttons_state & MOUSE_EVENT_LBUTTON) + b |= 0x01; + if (s->buttons_state & MOUSE_EVENT_RBUTTON) + b |= 0x02; + if (s->buttons_state & MOUSE_EVENT_MBUTTON) + b |= 0x04; + + buf[0] = b; + buf[1] = dx; + buf[2] = dy; + l = 3; + if (len >= 4) { + buf[3] = dz; + l = 4; + } + return l; +} + +static void usb_mouse_handle_reset(USBDevice *dev) +{ + USBMouseState *s = (USBMouseState *)dev; + + s->dx = 0; + s->dy = 0; + s->dz = 0; + s->buttons_state = 0; +} + +static int usb_mouse_handle_control(USBDevice *dev, int request, int value, + int index, int length, uint8_t *data) +{ + USBMouseState *s = (USBMouseState *)dev; + int ret; + + switch(request) { + case DeviceRequest | USB_REQ_GET_STATUS: + data[0] = (1 << USB_DEVICE_SELF_POWERED) | + (dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP); + data[1] = 0x00; + ret = 2; + break; + case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: + if (value == USB_DEVICE_REMOTE_WAKEUP) { + dev->remote_wakeup = 0; + } else { + goto fail; + } + ret = 0; + break; + case DeviceOutRequest | USB_REQ_SET_FEATURE: + if (value == USB_DEVICE_REMOTE_WAKEUP) { + dev->remote_wakeup = 1; + } else { + goto fail; + } + ret = 0; + break; + case DeviceOutRequest | USB_REQ_SET_ADDRESS: + dev->addr = value; + ret = 0; + break; + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + switch(value >> 8) { + case USB_DT_DEVICE: + memcpy(data, qemu_mouse_dev_descriptor, + sizeof(qemu_mouse_dev_descriptor)); + ret = sizeof(qemu_mouse_dev_descriptor); + break; + case USB_DT_CONFIG: + memcpy(data, qemu_mouse_config_descriptor, + sizeof(qemu_mouse_config_descriptor)); + ret = sizeof(qemu_mouse_config_descriptor); + break; + case USB_DT_STRING: + switch(value & 0xff) { + case 0: + /* language ids */ + data[0] = 4; + data[1] = 3; + data[2] = 0x09; + data[3] = 0x04; + ret = 4; + break; + case 1: + /* serial number */ + ret = set_usb_string(data, "1"); + break; + case 2: + /* product description */ + ret = set_usb_string(data, "QEMU USB Mouse"); + break; + case 3: + /* vendor description */ + ret = set_usb_string(data, "QEMU " QEMU_VERSION); + break; + case 4: + ret = set_usb_string(data, "HID Mouse"); + break; + case 5: + ret = set_usb_string(data, "Endpoint1 Interrupt Pipe"); + break; + default: + goto fail; + } + break; + default: + goto fail; + } + break; + case DeviceRequest | USB_REQ_GET_CONFIGURATION: + data[0] = 1; + ret = 1; + break; + case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: + ret = 0; + break; + case DeviceRequest | USB_REQ_GET_INTERFACE: + data[0] = 0; + ret = 1; + break; + case DeviceOutRequest | USB_REQ_SET_INTERFACE: + ret = 0; + break; + /* hid specific requests */ + case InterfaceRequest | USB_REQ_GET_DESCRIPTOR: + switch(value >> 8) { + case 0x22: + memcpy(data, qemu_mouse_hid_report_descriptor, + sizeof(qemu_mouse_hid_report_descriptor)); + ret = sizeof(qemu_mouse_hid_report_descriptor); + break; + default: + goto fail; + } + break; + case GET_REPORT: + ret = usb_mouse_poll(s, data, length); + break; + case SET_IDLE: + ret = 0; + break; + default: + fail: + ret = USB_RET_STALL; + break; + } + return ret; +} + +static int usb_mouse_handle_data(USBDevice *dev, int pid, + uint8_t devep, uint8_t *data, int len) +{ + USBMouseState *s = (USBMouseState *)dev; + int ret; + + switch(pid) { + case USB_TOKEN_IN: + if (devep == 1) { + ret = usb_mouse_poll(s, data, len); + } else { + goto fail; + } + break; + case USB_TOKEN_OUT: + default: + fail: + ret = USB_RET_STALL; + break; + } + return ret; +} + +USBDevice *usb_mouse_init(void) +{ + USBMouseState *s; + + s = qemu_mallocz(sizeof(USBMouseState)); + if (!s) + return NULL; + s->dev.speed = USB_SPEED_FULL; + s->dev.handle_packet = usb_generic_handle_packet; + + s->dev.handle_reset = usb_mouse_handle_reset; + s->dev.handle_control = usb_mouse_handle_control; + s->dev.handle_data = usb_mouse_handle_data; + + qemu_add_mouse_event_handler(usb_mouse_event, s); + + return (USBDevice *)s; +} @@ -64,6 +64,13 @@ #define DeviceRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) #define DeviceOutRequest ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) +#define InterfaceRequest \ + ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) +#define InterfaceOutRequest \ + ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) +#define EndpointRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8) +#define EndpointOutRequest \ + ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8) #define USB_REQ_GET_STATUS 0x00 #define USB_REQ_CLEAR_FEATURE 0x01 @@ -137,3 +144,6 @@ void usb_uhci_init(PCIBus *bus, USBPort **usb_ports); /* usb-linux.c */ USBDevice *usb_host_hub_init(void); + +/* usb-hid.c */ +USBDevice *usb_mouse_init(void); |