usb: the big rename

Reorganize usb source files.  Create a new hw/usb/ directory and move
all usb source code to that place.  Also make filenames a bit more
descriptive.  Host adapters are prefixed with "hch-" now, usb device
emulations are prefixed with "dev-".  Fixup paths Makefile and include
paths to make it compile.  No code changes.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

1 files changed, 0 insertions, 1913 deletions

diff --git a/usb-linux.c b/usb-linux.c
deleted file mode 100644
index 90919c242a..0000000000
--- a/usb-linux.c
+++ /dev/null
@@ -1,1913 +0,0 @@
-/*
- * Linux host USB redirector
- *
- * Copyright (c) 2005 Fabrice Bellard
- *
- * Copyright (c) 2008 Max Krasnyansky
- *      Support for host device auto connect & disconnect
- *      Major rewrite to support fully async operation
- *
- * Copyright 2008 TJ <linux@tjworld.net>
- *      Added flexible support for /dev/bus/usb /sys/bus/usb/devices in addition
- *      to the legacy /proc/bus/usb USB device discovery and handling
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include "qemu-common.h"
-#include "qemu-timer.h"
-#include "monitor.h"
-#include "sysemu.h"
-#include "trace.h"
-
-#include <dirent.h>
-#include <sys/ioctl.h>
-
-#include <linux/usbdevice_fs.h>
-#include <linux/version.h>
-#include "hw/usb.h"
-
-/* We redefine it to avoid version problems */
-struct usb_ctrltransfer {
-    uint8_t  bRequestType;
-    uint8_t  bRequest;
-    uint16_t wValue;
-    uint16_t wIndex;
-    uint16_t wLength;
-    uint32_t timeout;
-    void *data;
-};
-
-typedef int USBScanFunc(void *opaque, int bus_num, int addr, const char *port,
-                        int class_id, int vendor_id, int product_id,
-                        const char *product_name, int speed);
-
-//#define DEBUG
-
-#ifdef DEBUG
-#define DPRINTF printf
-#else
-#define DPRINTF(...)
-#endif
-
-#define PRODUCT_NAME_SZ 32
-#define MAX_PORTLEN 16
-
-/* endpoint association data */
-#define ISO_FRAME_DESC_PER_URB 32
-
-/* devio.c limits single requests to 16k */
-#define MAX_USBFS_BUFFER_SIZE 16384
-
-typedef struct AsyncURB AsyncURB;
-
-struct endp_data {
-    uint8_t halted;
-    uint8_t iso_started;
-    AsyncURB *iso_urb;
-    int iso_urb_idx;
-    int iso_buffer_used;
-    int inflight;
-};
-
-struct USBAutoFilter {
-    uint32_t bus_num;
-    uint32_t addr;
-    char     *port;
-    uint32_t vendor_id;
-    uint32_t product_id;
-};
-
-typedef struct USBHostDevice {
-    USBDevice dev;
-    int       fd;
-    int       hub_fd;
-    int       hub_port;
-
-    uint8_t   descr[8192];
-    int       descr_len;
-    int       closing;
-    uint32_t  iso_urb_count;
-    Notifier  exit;
-
-    struct endp_data ep_in[USB_MAX_ENDPOINTS];
-    struct endp_data ep_out[USB_MAX_ENDPOINTS];
-    QLIST_HEAD(, AsyncURB) aurbs;
-
-    /* Host side address */
-    int bus_num;
-    int addr;
-    char port[MAX_PORTLEN];
-    struct USBAutoFilter match;
-    int seen, errcount;
-
-    QTAILQ_ENTRY(USBHostDevice) next;
-} USBHostDevice;
-
-static QTAILQ_HEAD(, USBHostDevice) hostdevs = QTAILQ_HEAD_INITIALIZER(hostdevs);
-
-static int usb_host_close(USBHostDevice *dev);
-static int parse_filter(const char *spec, struct USBAutoFilter *f);
-static void usb_host_auto_check(void *unused);
-static int usb_host_read_file(char *line, size_t line_size,
-                            const char *device_file, const char *device_name);
-static int usb_linux_update_endp_table(USBHostDevice *s);
-
-static int usb_host_usbfs_type(USBHostDevice *s, USBPacket *p)
-{
-    static const int usbfs[] = {
-        [USB_ENDPOINT_XFER_CONTROL] = USBDEVFS_URB_TYPE_CONTROL,
-        [USB_ENDPOINT_XFER_ISOC]    = USBDEVFS_URB_TYPE_ISO,
-        [USB_ENDPOINT_XFER_BULK]    = USBDEVFS_URB_TYPE_BULK,
-        [USB_ENDPOINT_XFER_INT]     = USBDEVFS_URB_TYPE_INTERRUPT,
-    };
-    uint8_t type = p->ep->type;
-    assert(type < ARRAY_SIZE(usbfs));
-    return usbfs[type];
-}
-
-static int usb_host_do_reset(USBHostDevice *dev)
-{
-    struct timeval s, e;
-    uint32_t usecs;
-    int ret;
-
-    gettimeofday(&s, NULL);
-    ret = ioctl(dev->fd, USBDEVFS_RESET);
-    gettimeofday(&e, NULL);
-    usecs = (e.tv_sec  - s.tv_sec) * 1000000;
-    usecs += e.tv_usec - s.tv_usec;
-    if (usecs > 1000000) {
-        /* more than a second, something is fishy, broken usb device? */
-        fprintf(stderr, "husb: device %d:%d reset took %d.%06d seconds\n",
-                dev->bus_num, dev->addr, usecs / 1000000, usecs % 1000000);
-    }
-    return ret;
-}
-
-static struct endp_data *get_endp(USBHostDevice *s, int pid, int ep)
-{
-    struct endp_data *eps = pid == USB_TOKEN_IN ? s->ep_in : s->ep_out;
-    assert(pid == USB_TOKEN_IN || pid == USB_TOKEN_OUT);
-    assert(ep > 0 && ep <= USB_MAX_ENDPOINTS);
-    return eps + ep - 1;
-}
-
-static int is_isoc(USBHostDevice *s, int pid, int ep)
-{
-    return usb_ep_get_type(&s->dev, pid, ep) == USB_ENDPOINT_XFER_ISOC;
-}
-
-static int is_valid(USBHostDevice *s, int pid, int ep)
-{
-    return usb_ep_get_type(&s->dev, pid, ep) != USB_ENDPOINT_XFER_INVALID;
-}
-
-static int is_halted(USBHostDevice *s, int pid, int ep)
-{
-    return get_endp(s, pid, ep)->halted;
-}
-
-static void clear_halt(USBHostDevice *s, int pid, int ep)
-{
-    trace_usb_host_ep_clear_halt(s->bus_num, s->addr, ep);
-    get_endp(s, pid, ep)->halted = 0;
-}
-
-static void set_halt(USBHostDevice *s, int pid, int ep)
-{
-    if (ep != 0) {
-        trace_usb_host_ep_set_halt(s->bus_num, s->addr, ep);
-        get_endp(s, pid, ep)->halted = 1;
-    }
-}
-
-static int is_iso_started(USBHostDevice *s, int pid, int ep)
-{
-    return get_endp(s, pid, ep)->iso_started;
-}
-
-static void clear_iso_started(USBHostDevice *s, int pid, int ep)
-{
-    trace_usb_host_ep_stop_iso(s->bus_num, s->addr, ep);
-    get_endp(s, pid, ep)->iso_started = 0;
-}
-
-static void set_iso_started(USBHostDevice *s, int pid, int ep)
-{
-    struct endp_data *e = get_endp(s, pid, ep);
-
-    trace_usb_host_ep_start_iso(s->bus_num, s->addr, ep);
-    if (!e->iso_started) {
-        e->iso_started = 1;
-        e->inflight = 0;
-    }
-}
-
-static int change_iso_inflight(USBHostDevice *s, int pid, int ep, int value)
-{
-    struct endp_data *e = get_endp(s, pid, ep);
-
-    e->inflight += value;
-    return e->inflight;
-}
-
-static void set_iso_urb(USBHostDevice *s, int pid, int ep, AsyncURB *iso_urb)
-{
-    get_endp(s, pid, ep)->iso_urb = iso_urb;
-}
-
-static AsyncURB *get_iso_urb(USBHostDevice *s, int pid, int ep)
-{
-    return get_endp(s, pid, ep)->iso_urb;
-}
-
-static void set_iso_urb_idx(USBHostDevice *s, int pid, int ep, int i)
-{
-    get_endp(s, pid, ep)->iso_urb_idx = i;
-}
-
-static int get_iso_urb_idx(USBHostDevice *s, int pid, int ep)
-{
-    return get_endp(s, pid, ep)->iso_urb_idx;
-}
-
-static void set_iso_buffer_used(USBHostDevice *s, int pid, int ep, int i)
-{
-    get_endp(s, pid, ep)->iso_buffer_used = i;
-}
-
-static int get_iso_buffer_used(USBHostDevice *s, int pid, int ep)
-{
-    return get_endp(s, pid, ep)->iso_buffer_used;
-}
-
-/*
- * Async URB state.
- * We always allocate iso packet descriptors even for bulk transfers
- * to simplify allocation and casts.
- */
-struct AsyncURB
-{
-    struct usbdevfs_urb urb;
-    struct usbdevfs_iso_packet_desc isocpd[ISO_FRAME_DESC_PER_URB];
-    USBHostDevice *hdev;
-    QLIST_ENTRY(AsyncURB) next;
-
-    /* For regular async urbs */
-    USBPacket     *packet;
-    int more; /* large transfer, more urbs follow */
-
-    /* For buffered iso handling */
-    int iso_frame_idx; /* -1 means in flight */
-};
-
-static AsyncURB *async_alloc(USBHostDevice *s)
-{
-    AsyncURB *aurb = g_malloc0(sizeof(AsyncURB));
-    aurb->hdev = s;
-    QLIST_INSERT_HEAD(&s->aurbs, aurb, next);
-    return aurb;
-}
-
-static void async_free(AsyncURB *aurb)
-{
-    QLIST_REMOVE(aurb, next);
-    g_free(aurb);
-}
-
-static void do_disconnect(USBHostDevice *s)
-{
-    usb_host_close(s);
-    usb_host_auto_check(NULL);
-}
-
-static void async_complete(void *opaque)
-{
-    USBHostDevice *s = opaque;
-    AsyncURB *aurb;
-    int urbs = 0;
-
-    while (1) {
-        USBPacket *p;
-
-        int r = ioctl(s->fd, USBDEVFS_REAPURBNDELAY, &aurb);
-        if (r < 0) {
-            if (errno == EAGAIN) {
-                if (urbs > 2) {
-                    fprintf(stderr, "husb: %d iso urbs finished at once\n", urbs);
-                }
-                return;
-            }
-            if (errno == ENODEV) {
-                if (!s->closing) {
-                    trace_usb_host_disconnect(s->bus_num, s->addr);
-                    do_disconnect(s);
-                }
-                return;
-            }
-
-            perror("USBDEVFS_REAPURBNDELAY");
-            return;
-        }
-
-        DPRINTF("husb: async completed. aurb %p status %d alen %d\n",
-                aurb, aurb->urb.status, aurb->urb.actual_length);
-
-        /* If this is a buffered iso urb mark it as complete and don't do
-           anything else (it is handled further in usb_host_handle_iso_data) */
-        if (aurb->iso_frame_idx == -1) {
-            int inflight;
-            int pid = (aurb->urb.endpoint & USB_DIR_IN) ?
-                USB_TOKEN_IN : USB_TOKEN_OUT;
-            int ep = aurb->urb.endpoint & 0xf;
-            if (aurb->urb.status == -EPIPE) {
-                set_halt(s, pid, ep);
-            }
-            aurb->iso_frame_idx = 0;
-            urbs++;
-            inflight = change_iso_inflight(s, pid, ep, -1);
-            if (inflight == 0 && is_iso_started(s, pid, ep)) {
-                fprintf(stderr, "husb: out of buffers for iso stream\n");
-            }
-            continue;
-        }
-
-        p = aurb->packet;
-        trace_usb_host_urb_complete(s->bus_num, s->addr, aurb, aurb->urb.status,
-                                    aurb->urb.actual_length, aurb->more);
-
-        if (p) {
-            switch (aurb->urb.status) {
-            case 0:
-                p->result += aurb->urb.actual_length;
-                break;
-
-            case -EPIPE:
-                set_halt(s, p->pid, p->ep->nr);
-                p->result = USB_RET_STALL;
-                break;
-
-            case -EOVERFLOW:
-                p->result = USB_RET_BABBLE;
-                break;
-
-            default:
-                p->result = USB_RET_IOERROR;
-                break;
-            }
-
-            if (aurb->urb.type == USBDEVFS_URB_TYPE_CONTROL) {
-                trace_usb_host_req_complete(s->bus_num, s->addr, p->result);
-                usb_generic_async_ctrl_complete(&s->dev, p);
-            } else if (!aurb->more) {
-                trace_usb_host_req_complete(s->bus_num, s->addr, p->result);
-                usb_packet_complete(&s->dev, p);
-            }
-        }
-
-        async_free(aurb);
-    }
-}
-
-static void usb_host_async_cancel(USBDevice *dev, USBPacket *p)
-{
-    USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
-    AsyncURB *aurb;
-
-    QLIST_FOREACH(aurb, &s->aurbs, next) {
-        if (p != aurb->packet) {
-            continue;
-        }
-
-        DPRINTF("husb: async cancel: packet %p, aurb %p\n", p, aurb);
-
-        /* Mark it as dead (see async_complete above) */
-        aurb->packet = NULL;
-
-        int r = ioctl(s->fd, USBDEVFS_DISCARDURB, aurb);
-        if (r < 0) {
-            DPRINTF("husb: async. discard urb failed errno %d\n", errno);
-        }
-    }
-}
-
-static int usb_host_open_device(int bus, int addr)
-{
-    const char *usbfs = NULL;
-    char filename[32];
-    struct stat st;
-    int fd, rc;
-
-    rc = stat("/dev/bus/usb", &st);
-    if (rc == 0 && S_ISDIR(st.st_mode)) {
-        /* udev-created device nodes available */
-        usbfs = "/dev/bus/usb";
-    } else {
-        /* fallback: usbfs mounted below /proc */
-        usbfs = "/proc/bus/usb";
-    }
-
-    snprintf(filename, sizeof(filename), "%s/%03d/%03d",
-             usbfs, bus, addr);
-    fd = open(filename, O_RDWR | O_NONBLOCK);
-    if (fd < 0) {
-        fprintf(stderr, "husb: open %s: %s\n", filename, strerror(errno));
-    }
-    return fd;
-}
-
-static int usb_host_claim_port(USBHostDevice *s)
-{
-#ifdef USBDEVFS_CLAIM_PORT
-    char *h, hub_name[64], line[1024];
-    int hub_addr, ret;
-
-    snprintf(hub_name, sizeof(hub_name), "%d-%s",
-             s->match.bus_num, s->match.port);
-
-    /* try strip off last ".$portnr" to get hub */
-    h = strrchr(hub_name, '.');
-    if (h != NULL) {
-        s->hub_port = atoi(h+1);
-        *h = '\0';
-    } else {
-        /* no dot in there -> it is the root hub */
-        snprintf(hub_name, sizeof(hub_name), "usb%d",
-                 s->match.bus_num);
-        s->hub_port = atoi(s->match.port);
-    }
-
-    if (!usb_host_read_file(line, sizeof(line), "devnum",
-                            hub_name)) {
-        return -1;
-    }
-    if (sscanf(line, "%d", &hub_addr) != 1) {
-        return -1;
-    }
-
-    s->hub_fd = usb_host_open_device(s->match.bus_num, hub_addr);
-    if (s->hub_fd < 0) {
-        return -1;
-    }
-
-    ret = ioctl(s->hub_fd, USBDEVFS_CLAIM_PORT, &s->hub_port);
-    if (ret < 0) {
-        close(s->hub_fd);
-        s->hub_fd = -1;
-        return -1;
-    }
-
-    trace_usb_host_claim_port(s->match.bus_num, hub_addr, s->hub_port);
-    return 0;
-#else
-    return -1;
-#endif
-}
-
-static void usb_host_release_port(USBHostDevice *s)
-{
-    if (s->hub_fd == -1) {
-        return;
-    }
-#ifdef USBDEVFS_RELEASE_PORT
-    ioctl(s->hub_fd, USBDEVFS_RELEASE_PORT, &s->hub_port);
-#endif
-    close(s->hub_fd);
-    s->hub_fd = -1;
-}
-
-static int usb_host_disconnect_ifaces(USBHostDevice *dev, int nb_interfaces)
-{
-    /* earlier Linux 2.4 do not support that */
-#ifdef USBDEVFS_DISCONNECT
-    struct usbdevfs_ioctl ctrl;
-    int ret, interface;
-
-    for (interface = 0; interface < nb_interfaces; interface++) {
-        ctrl.ioctl_code = USBDEVFS_DISCONNECT;
-        ctrl.ifno = interface;
-        ctrl.data = 0;
-        ret = ioctl(dev->fd, USBDEVFS_IOCTL, &ctrl);
-        if (ret < 0 && errno != ENODATA) {
-            perror("USBDEVFS_DISCONNECT");
-            return -1;
-        }
-    }
-#endif
-    return 0;
-}
-
-static int usb_linux_get_num_interfaces(USBHostDevice *s)
-{
-    char device_name[64], line[1024];
-    int num_interfaces = 0;
-
-    sprintf(device_name, "%d-%s", s->bus_num, s->port);
-    if (!usb_host_read_file(line, sizeof(line), "bNumInterfaces",
-                            device_name)) {
-        return -1;
-    }
-    if (sscanf(line, "%d", &num_interfaces) != 1) {
-        return -1;
-    }
-    return num_interfaces;
-}
-
-static int usb_host_claim_interfaces(USBHostDevice *dev, int configuration)
-{
-    const char *op = NULL;
-    int dev_descr_len, config_descr_len;
-    int interface, nb_interfaces;
-    int ret, i;
-
-    for (i = 0; i < USB_MAX_INTERFACES; i++) {
-        dev->dev.altsetting[i] = 0;
-    }
-
-    if (configuration == 0) { /* address state - ignore */
-        dev->dev.ninterfaces   = 0;
-        dev->dev.configuration = 0;
-        return 1;
-    }
-
-    DPRINTF("husb: claiming interfaces. config %d\n", configuration);
-
-    i = 0;
-    dev_descr_len = dev->descr[0];
-    if (dev_descr_len > dev->descr_len) {
-        fprintf(stderr, "husb: update iface failed. descr too short\n");
-        return 0;
-    }
-
-    i += dev_descr_len;
-    while (i < dev->descr_len) {
-        DPRINTF("husb: i is %d, descr_len is %d, dl %d, dt %d\n",
-                i, dev->descr_len,
-               dev->descr[i], dev->descr[i+1]);
-
-        if (dev->descr[i+1] != USB_DT_CONFIG) {
-            i += dev->descr[i];
-            continue;
-        }
-        config_descr_len = dev->descr[i];
-
-        DPRINTF("husb: config #%d need %d\n", dev->descr[i + 5], configuration);
-
-        if (configuration == dev->descr[i + 5]) {
-            configuration = dev->descr[i + 5];
-            break;
-        }
-
-        i += config_descr_len;
-    }
-
-    if (i >= dev->descr_len) {
-        fprintf(stderr,
-                "husb: update iface failed. no matching configuration\n");
-        return 0;
-    }
-    nb_interfaces = dev->descr[i + 4];
-
-    if (usb_host_disconnect_ifaces(dev, nb_interfaces) < 0) {
-        goto fail;
-    }
-
-    /* XXX: only grab if all interfaces are free */
-    for (interface = 0; interface < nb_interfaces; interface++) {
-        op = "USBDEVFS_CLAIMINTERFACE";
-        ret = ioctl(dev->fd, USBDEVFS_CLAIMINTERFACE, &interface);
-        if (ret < 0) {
-            goto fail;
-        }
-    }
-
-    trace_usb_host_claim_interfaces(dev->bus_num, dev->addr,
-                                    nb_interfaces, configuration);
-
-    dev->dev.ninterfaces   = nb_interfaces;
-    dev->dev.configuration = configuration;
-    return 1;
-
-fail:
-    if (errno == ENODEV) {
-        do_disconnect(dev);
-    }
-    perror(op);
-    return 0;
-}
-
-static int usb_host_release_interfaces(USBHostDevice *s)
-{
-    int ret, i;
-
-    trace_usb_host_release_interfaces(s->bus_num, s->addr);
-
-    for (i = 0; i < s->dev.ninterfaces; i++) {
-        ret = ioctl(s->fd, USBDEVFS_RELEASEINTERFACE, &i);
-        if (ret < 0) {
-            perror("USBDEVFS_RELEASEINTERFACE");
-            return 0;
-        }
-    }
-    return 1;
-}
-
-static void usb_host_handle_reset(USBDevice *dev)
-{
-    USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
-
-    trace_usb_host_reset(s->bus_num, s->addr);
-
-    usb_host_do_reset(s);;
-
-    usb_host_claim_interfaces(s, 0);
-    usb_linux_update_endp_table(s);
-}
-
-static void usb_host_handle_destroy(USBDevice *dev)
-{
-    USBHostDevice *s = (USBHostDevice *)dev;
-
-    usb_host_release_port(s);
-    usb_host_close(s);
-    QTAILQ_REMOVE(&hostdevs, s, next);
-    qemu_remove_exit_notifier(&s->exit);
-}
-
-/* iso data is special, we need to keep enough urbs in flight to make sure
-   that the controller never runs out of them, otherwise the device will
-   likely suffer a buffer underrun / overrun. */
-static AsyncURB *usb_host_alloc_iso(USBHostDevice *s, int pid, uint8_t ep)
-{
-    AsyncURB *aurb;
-    int i, j, len = usb_ep_get_max_packet_size(&s->dev, pid, ep);
-
-    aurb = g_malloc0(s->iso_urb_count * sizeof(*aurb));
-    for (i = 0; i < s->iso_urb_count; i++) {
-        aurb[i].urb.endpoint      = ep;
-        aurb[i].urb.buffer_length = ISO_FRAME_DESC_PER_URB * len;
-        aurb[i].urb.buffer        = g_malloc(aurb[i].urb.buffer_length);
-        aurb[i].urb.type          = USBDEVFS_URB_TYPE_ISO;
-        aurb[i].urb.flags         = USBDEVFS_URB_ISO_ASAP;
-        aurb[i].urb.number_of_packets = ISO_FRAME_DESC_PER_URB;
-        for (j = 0 ; j < ISO_FRAME_DESC_PER_URB; j++)
-            aurb[i].urb.iso_frame_desc[j].length = len;
-        if (pid == USB_TOKEN_IN) {
-            aurb[i].urb.endpoint |= 0x80;
-            /* Mark as fully consumed (idle) */
-            aurb[i].iso_frame_idx = ISO_FRAME_DESC_PER_URB;
-        }
-    }
-    set_iso_urb(s, pid, ep, aurb);
-
-    return aurb;
-}
-
-static void usb_host_stop_n_free_iso(USBHostDevice *s, int pid, uint8_t ep)
-{
-    AsyncURB *aurb;
-    int i, ret, killed = 0, free = 1;
-
-    aurb = get_iso_urb(s, pid, ep);
-    if (!aurb) {
-        return;
-    }
-
-    for (i = 0; i < s->iso_urb_count; i++) {
-        /* in flight? */
-        if (aurb[i].iso_frame_idx == -1) {
-            ret = ioctl(s->fd, USBDEVFS_DISCARDURB, &aurb[i]);
-            if (ret < 0) {
-                perror("USBDEVFS_DISCARDURB");
-                free = 0;
-                continue;
-            }
-            killed++;
-        }
-    }
-
-    /* Make sure any urbs we've killed are reaped before we free them */
-    if (killed) {
-        async_complete(s);
-    }
-
-    for (i = 0; i < s->iso_urb_count; i++) {
-        g_free(aurb[i].urb.buffer);
-    }
-
-    if (free)
-        g_free(aurb);
-    else
-        printf("husb: leaking iso urbs because of discard failure\n");
-    set_iso_urb(s, pid, ep, NULL);
-    set_iso_urb_idx(s, pid, ep, 0);
-    clear_iso_started(s, pid, ep);
-}
-
-static int urb_status_to_usb_ret(int status)
-{
-    switch (status) {
-    case -EPIPE:
-        return USB_RET_STALL;
-    case -EOVERFLOW:
-        return USB_RET_BABBLE;
-    default:
-        return USB_RET_IOERROR;
-    }
-}
-
-static int usb_host_handle_iso_data(USBHostDevice *s, USBPacket *p, int in)
-{
-    AsyncURB *aurb;
-    int i, j, ret, max_packet_size, offset, len = 0;
-    uint8_t *buf;
-
-    max_packet_size = p->ep->max_packet_size;
-    if (max_packet_size == 0)
-        return USB_RET_NAK;
-
-    aurb = get_iso_urb(s, p->pid, p->ep->nr);
-    if (!aurb) {
-        aurb = usb_host_alloc_iso(s, p->pid, p->ep->nr);
-    }
-
-    i = get_iso_urb_idx(s, p->pid, p->ep->nr);
-    j = aurb[i].iso_frame_idx;
-    if (j >= 0 && j < ISO_FRAME_DESC_PER_URB) {
-        if (in) {
-            /* Check urb status  */
-            if (aurb[i].urb.status) {
-                len = urb_status_to_usb_ret(aurb[i].urb.status);
-                /* Move to the next urb */
-                aurb[i].iso_frame_idx = ISO_FRAME_DESC_PER_URB - 1;
-            /* Check frame status */
-            } else if (aurb[i].urb.iso_frame_desc[j].status) {
-                len = urb_status_to_usb_ret(
-                                        aurb[i].urb.iso_frame_desc[j].status);
-            /* Check the frame fits */
-            } else if (aurb[i].urb.iso_frame_desc[j].actual_length
-                       > p->iov.size) {
-                printf("husb: received iso data is larger then packet\n");
-                len = USB_RET_BABBLE;
-            /* All good copy data over */
-            } else {
-                len = aurb[i].urb.iso_frame_desc[j].actual_length;
-                buf  = aurb[i].urb.buffer +
-                    j * aurb[i].urb.iso_frame_desc[0].length;
-                usb_packet_copy(p, buf, len);
-            }
-        } else {
-            len = p->iov.size;
-            offset = (j == 0) ? 0 : get_iso_buffer_used(s, p->pid, p->ep->nr);
-
-            /* Check the frame fits */
-            if (len > max_packet_size) {
-                printf("husb: send iso data is larger then max packet size\n");
-                return USB_RET_NAK;
-            }
-
-            /* All good copy data over */
-            usb_packet_copy(p, aurb[i].urb.buffer + offset, len);
-            aurb[i].urb.iso_frame_desc[j].length = len;
-            offset += len;
-            set_iso_buffer_used(s, p->pid, p->ep->nr, offset);
-
-            /* Start the stream once we have buffered enough data */
-            if (!is_iso_started(s, p->pid, p->ep->nr) && i == 1 && j == 8) {
-                set_iso_started(s, p->pid, p->ep->nr);
-            }
-        }
-        aurb[i].iso_frame_idx++;
-        if (aurb[i].iso_frame_idx == ISO_FRAME_DESC_PER_URB) {
-            i = (i + 1) % s->iso_urb_count;
-            set_iso_urb_idx(s, p->pid, p->ep->nr, i);
-        }
-    } else {
-        if (in) {
-            set_iso_started(s, p->pid, p->ep->nr);
-        } else {
-            DPRINTF("hubs: iso out error no free buffer, dropping packet\n");
-        }
-    }
-
-    if (is_iso_started(s, p->pid, p->ep->nr)) {
-        /* (Re)-submit all fully consumed / filled urbs */
-        for (i = 0; i < s->iso_urb_count; i++) {
-            if (aurb[i].iso_frame_idx == ISO_FRAME_DESC_PER_URB) {
-                ret = ioctl(s->fd, USBDEVFS_SUBMITURB, &aurb[i]);
-                if (ret < 0) {
-                    perror("USBDEVFS_SUBMITURB");
-                    if (!in || len == 0) {
-                        switch(errno) {
-                        case ETIMEDOUT:
-                            len = USB_RET_NAK;
-                            break;
-                        case EPIPE:
-                        default:
-                            len = USB_RET_STALL;
-                        }
-                    }
-                    break;
-                }
-                aurb[i].iso_frame_idx = -1;
-                change_iso_inflight(s, p->pid, p->ep->nr, 1);
-            }
-        }
-    }
-
-    return len;
-}
-
-static int usb_host_handle_data(USBDevice *dev, USBPacket *p)
-{
-    USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
-    struct usbdevfs_urb *urb;
-    AsyncURB *aurb;
-    int ret, rem, prem, v;
-    uint8_t *pbuf;
-    uint8_t ep;
-
-    trace_usb_host_req_data(s->bus_num, s->addr,
-                            p->pid == USB_TOKEN_IN,
-                            p->ep->nr, p->iov.size);
-
-    if (!is_valid(s, p->pid, p->ep->nr)) {
-        trace_usb_host_req_complete(s->bus_num, s->addr, USB_RET_NAK);
-        return USB_RET_NAK;
-    }
-
-    if (p->pid == USB_TOKEN_IN) {
-        ep = p->ep->nr | 0x80;
-    } else {
-        ep = p->ep->nr;
-    }
-
-    if (is_halted(s, p->pid, p->ep->nr)) {
-        unsigned int arg = ep;
-        ret = ioctl(s->fd, USBDEVFS_CLEAR_HALT, &arg);
-        if (ret < 0) {
-            perror("USBDEVFS_CLEAR_HALT");
-            trace_usb_host_req_complete(s->bus_num, s->addr, USB_RET_NAK);
-            return USB_RET_NAK;
-        }
-        clear_halt(s, p->pid, p->ep->nr);
-    }
-
-    if (is_isoc(s, p->pid, p->ep->nr)) {
-        return usb_host_handle_iso_data(s, p, p->pid == USB_TOKEN_IN);
-    }
-
-    v = 0;
-    prem = p->iov.iov[v].iov_len;
-    pbuf = p->iov.iov[v].iov_base;
-    rem = p->iov.size;
-    while (rem) {
-        if (prem == 0) {
-            v++;
-            assert(v < p->iov.niov);
-            prem = p->iov.iov[v].iov_len;
-            pbuf = p->iov.iov[v].iov_base;
-            assert(prem <= rem);
-        }
-        aurb = async_alloc(s);
-        aurb->packet = p;
-
-        urb = &aurb->urb;
-        urb->endpoint      = ep;
-        urb->type          = usb_host_usbfs_type(s, p);
-        urb->usercontext   = s;
-        urb->buffer        = pbuf;
-        urb->buffer_length = prem;
-
-        if (urb->buffer_length > MAX_USBFS_BUFFER_SIZE) {
-            urb->buffer_length = MAX_USBFS_BUFFER_SIZE;
-        }
-        pbuf += urb->buffer_length;
-        prem -= urb->buffer_length;
-        rem  -= urb->buffer_length;
-        if (rem) {
-            aurb->more         = 1;
-        }
-
-        trace_usb_host_urb_submit(s->bus_num, s->addr, aurb,
-                                  urb->buffer_length, aurb->more);
-        ret = ioctl(s->fd, USBDEVFS_SUBMITURB, urb);
-
-        DPRINTF("husb: data submit: ep 0x%x, len %u, more %d, packet %p, aurb %p\n",
-                urb->endpoint, urb->buffer_length, aurb->more, p, aurb);
-
-        if (ret < 0) {
-            perror("USBDEVFS_SUBMITURB");
-            async_free(aurb);
-
-            switch(errno) {
-            case ETIMEDOUT:
-                trace_usb_host_req_complete(s->bus_num, s->addr, USB_RET_NAK);
-                return USB_RET_NAK;
-            case EPIPE:
-            default:
-                trace_usb_host_req_complete(s->bus_num, s->addr, USB_RET_STALL);
-                return USB_RET_STALL;
-            }
-        }
-    }
-
-    return USB_RET_ASYNC;
-}
-
-static int ctrl_error(void)
-{
-    if (errno == ETIMEDOUT) {
-        return USB_RET_NAK;
-    } else {
-        return USB_RET_STALL;
-    }
-}
-
-static int usb_host_set_address(USBHostDevice *s, int addr)
-{
-    trace_usb_host_set_address(s->bus_num, s->addr, addr);
-    s->dev.addr = addr;
-    return 0;
-}
-
-static int usb_host_set_config(USBHostDevice *s, int config)
-{
-    int ret, first = 1;
-
-    trace_usb_host_set_config(s->bus_num, s->addr, config);
-
-    usb_host_release_interfaces(s);
-
-again:
-    ret = ioctl(s->fd, USBDEVFS_SETCONFIGURATION, &config);
-
-    DPRINTF("husb: ctrl set config %d ret %d errno %d\n", config, ret, errno);
-
-    if (ret < 0 && errno == EBUSY && first) {
-        /* happens if usb device is in use by host drivers */
-        int count = usb_linux_get_num_interfaces(s);
-        if (count > 0) {
-            DPRINTF("husb: busy -> disconnecting %d interfaces\n", count);
-            usb_host_disconnect_ifaces(s, count);
-            first = 0;
-            goto again;
-        }
-    }
-
-    if (ret < 0) {
-        return ctrl_error();
-    }
-    usb_host_claim_interfaces(s, config);
-    usb_linux_update_endp_table(s);
-    return 0;
-}
-
-static int usb_host_set_interface(USBHostDevice *s, int iface, int alt)
-{
-    struct usbdevfs_setinterface si;
-    int i, ret;
-
-    trace_usb_host_set_interface(s->bus_num, s->addr, iface, alt);
-
-    for (i = 1; i <= USB_MAX_ENDPOINTS; i++) {
-        if (is_isoc(s, USB_TOKEN_IN, i)) {
-            usb_host_stop_n_free_iso(s, USB_TOKEN_IN, i);
-        }
-        if (is_isoc(s, USB_TOKEN_OUT, i)) {
-            usb_host_stop_n_free_iso(s, USB_TOKEN_OUT, i);
-        }
-    }
-
-    if (iface >= USB_MAX_INTERFACES) {
-        return USB_RET_STALL;
-    }
-
-    si.interface  = iface;
-    si.altsetting = alt;
-    ret = ioctl(s->fd, USBDEVFS_SETINTERFACE, &si);
-
-    DPRINTF("husb: ctrl set iface %d altset %d ret %d errno %d\n",
-            iface, alt, ret, errno);
-
-    if (ret < 0) {
-        return ctrl_error();
-    }
-
-    s->dev.altsetting[iface] = alt;
-    usb_linux_update_endp_table(s);
-    return 0;
-}
-
-static int usb_host_handle_control(USBDevice *dev, USBPacket *p,
-               int request, int value, int index, int length, uint8_t *data)
-{
-    USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
-    struct usbdevfs_urb *urb;
-    AsyncURB *aurb;
-    int ret;
-
-    /*
-     * Process certain standard device requests.
-     * These are infrequent and are processed synchronously.
-     */
-
-    /* Note request is (bRequestType << 8) | bRequest */
-    trace_usb_host_req_control(s->bus_num, s->addr, request, value, index);
-
-    switch (request) {
-    case DeviceOutRequest | USB_REQ_SET_ADDRESS:
-        return usb_host_set_address(s, value);
-
-    case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
-        return usb_host_set_config(s, value & 0xff);
-
-    case InterfaceOutRequest | USB_REQ_SET_INTERFACE:
-        return usb_host_set_interface(s, index, value);
-    }
-
-    /* The rest are asynchronous */
-
-    if (length > sizeof(dev->data_buf)) {
-        fprintf(stderr, "husb: ctrl buffer too small (%d > %zu)\n",
-                length, sizeof(dev->data_buf));
-        return USB_RET_STALL;
-    }
-
-    aurb = async_alloc(s);
-    aurb->packet = p;
-
-    /*
-     * Setup ctrl transfer.
-     *
-     * s->ctrl is laid out such that data buffer immediately follows
-     * 'req' struct which is exactly what usbdevfs expects.
-     */
-    urb = &aurb->urb;
-
-    urb->type     = USBDEVFS_URB_TYPE_CONTROL;
-    urb->endpoint = p->ep->nr;
-
-    urb->buffer        = &dev->setup_buf;
-    urb->buffer_length = length + 8;
-
-    urb->usercontext = s;
-
-    trace_usb_host_urb_submit(s->bus_num, s->addr, aurb,
-                              urb->buffer_length, aurb->more);
-    ret = ioctl(s->fd, USBDEVFS_SUBMITURB, urb);
-
-    DPRINTF("husb: submit ctrl. len %u aurb %p\n", urb->buffer_length, aurb);
-
-    if (ret < 0) {
-        DPRINTF("husb: submit failed. errno %d\n", errno);
-        async_free(aurb);
-
-        switch(errno) {
-        case ETIMEDOUT:
-            return USB_RET_NAK;
-        case EPIPE:
-        default:
-            return USB_RET_STALL;
-        }
-    }
-
-    return USB_RET_ASYNC;
-}
-
-static uint8_t usb_linux_get_alt_setting(USBHostDevice *s,
-    uint8_t configuration, uint8_t interface)
-{
-    char device_name[64], line[1024];
-    int alt_setting;
-
-    sprintf(device_name, "%d-%s:%d.%d", s->bus_num, s->port,
-            (int)configuration, (int)interface);
-
-    if (!usb_host_read_file(line, sizeof(line), "bAlternateSetting",
-                            device_name)) {
-        /* Assume alt 0 on error */
-        return 0;
-    }
-    if (sscanf(line, "%d", &alt_setting) != 1) {
-        /* Assume alt 0 on error */
-        return 0;
-    }
-    return alt_setting;
-}
-
-/* returns 1 on problem encountered or 0 for success */
-static int usb_linux_update_endp_table(USBHostDevice *s)
-{
-    uint8_t *descriptors;
-    uint8_t devep, type, alt_interface;
-    uint16_t raw;
-    int interface, length, i, ep, pid;
-    struct endp_data *epd;
-
-    usb_ep_init(&s->dev);
-
-    if (s->dev.configuration == 0) {
-        /* not configured yet -- leave all endpoints disabled */
-        return 0;
-    }
-
-    /* get the desired configuration, interface, and endpoint descriptors
-     * from device description */
-    descriptors = &s->descr[18];
-    length = s->descr_len - 18;
-    i = 0;
-
-    while (i < length) {
-        if (descriptors[i + 1] != USB_DT_CONFIG) {
-            fprintf(stderr, "invalid descriptor data\n");
-            return 1;
-        } else if (descriptors[i + 5] != s->dev.configuration) {
-            DPRINTF("not requested configuration %d\n", s->dev.configuration);
-            i += (descriptors[i + 3] << 8) + descriptors[i + 2];
-            continue;
-        }
-        i += descriptors[i];
-
-        if (descriptors[i + 1] != USB_DT_INTERFACE ||
-            (descriptors[i + 1] == USB_DT_INTERFACE &&
-             descriptors[i + 4] == 0)) {
-            i += descriptors[i];
-            continue;
-        }
-
-        interface = descriptors[i + 2];
-        alt_interface = usb_linux_get_alt_setting(s, s->dev.configuration,
-                                                  interface);
-
-        /* the current interface descriptor is the active interface
-         * and has endpoints */
-        if (descriptors[i + 3] != alt_interface) {
-            i += descriptors[i];
-            continue;
-        }
-
-        /* advance to the endpoints */
-        while (i < length && descriptors[i +1] != USB_DT_ENDPOINT) {
-            i += descriptors[i];
-        }
-
-        if (i >= length)
-            break;
-
-        while (i < length) {
-            if (descriptors[i + 1] != USB_DT_ENDPOINT) {
-                break;
-            }
-
-            devep = descriptors[i + 2];
-            pid = (devep & USB_DIR_IN) ? USB_TOKEN_IN : USB_TOKEN_OUT;
-            ep = devep & 0xf;
-            if (ep == 0) {
-                fprintf(stderr, "usb-linux: invalid ep descriptor, ep == 0\n");
-                return 1;
-            }
-
-            type = descriptors[i + 3] & 0x3;
-            raw = descriptors[i + 4] + (descriptors[i + 5] << 8);
-            usb_ep_set_max_packet_size(&s->dev, pid, ep, raw);
-            assert(usb_ep_get_type(&s->dev, pid, ep) ==
-                   USB_ENDPOINT_XFER_INVALID);
-            usb_ep_set_type(&s->dev, pid, ep, type);
-            usb_ep_set_ifnum(&s->dev, pid, ep, interface);
-            if (type == USB_ENDPOINT_XFER_BULK) {
-                usb_ep_set_pipeline(&s->dev, pid, ep, true);
-            }
-
-            epd = get_endp(s, pid, ep);
-            epd->halted = 0;
-
-            i += descriptors[i];
-        }
-    }
-#ifdef DEBUG
-    usb_ep_dump(&s->dev);
-#endif
-    return 0;
-}
-
-/*
- * Check if we can safely redirect a usb2 device to a usb1 virtual controller,
- * this function assumes this is safe, if:
- * 1) There are no isoc endpoints
- * 2) There are no interrupt endpoints with a max_packet_size > 64
- * Note bulk endpoints with a max_packet_size > 64 in theory also are not
- * usb1 compatible, but in practice this seems to work fine.
- */
-static int usb_linux_full_speed_compat(USBHostDevice *dev)
-{
-    int i, packet_size;
-
-    /*
-     * usb_linux_update_endp_table only registers info about ep in the current
-     * interface altsettings, so we need to parse the descriptors again.
-     */
-    for (i = 0; (i + 5) < dev->descr_len; i += dev->descr[i]) {
-        if (dev->descr[i + 1] == USB_DT_ENDPOINT) {
-            switch (dev->descr[i + 3] & 0x3) {
-            case 0x00: /* CONTROL */
-                break;
-            case 0x01: /* ISO */
-                return 0;
-            case 0x02: /* BULK */
-                break;
-            case 0x03: /* INTERRUPT */
-                packet_size = dev->descr[i + 4] + (dev->descr[i + 5] << 8);
-                if (packet_size > 64)
-                    return 0;
-                break;
-            }
-        }
-    }
-    return 1;
-}
-
-static int usb_host_open(USBHostDevice *dev, int bus_num,
-                         int addr, const char *port,
-                         const char *prod_name, int speed)
-{
-    int fd = -1, ret;
-
-    trace_usb_host_open_started(bus_num, addr);
-
-    if (dev->fd != -1) {
-        goto fail;
-    }
-
-    fd = usb_host_open_device(bus_num, addr);
-    if (fd < 0) {
-        goto fail;
-    }
-    DPRINTF("husb: opened %s\n", buf);
-
-    dev->bus_num = bus_num;
-    dev->addr = addr;
-    strcpy(dev->port, port);
-    dev->fd = fd;
-
-    /* read the device description */
-    dev->descr_len = read(fd, dev->descr, sizeof(dev->descr));
-    if (dev->descr_len <= 0) {
-        perror("husb: reading device data failed");
-        goto fail;
-    }
-
-#ifdef DEBUG
-    {
-        int x;
-        printf("=== begin dumping device descriptor data ===\n");
-        for (x = 0; x < dev->descr_len; x++) {
-            printf("%02x ", dev->descr[x]);
-        }
-        printf("\n=== end dumping device descriptor data ===\n");
-    }
-#endif
-
-
-    /* start unconfigured -- we'll wait for the guest to set a configuration */
-    if (!usb_host_claim_interfaces(dev, 0)) {
-        goto fail;
-    }
-
-    ret = usb_linux_update_endp_table(dev);
-    if (ret) {
-        goto fail;
-    }
-
-    if (speed == -1) {
-        struct usbdevfs_connectinfo ci;
-
-        ret = ioctl(fd, USBDEVFS_CONNECTINFO, &ci);
-        if (ret < 0) {
-            perror("usb_host_device_open: USBDEVFS_CONNECTINFO");
-            goto fail;
-        }
-
-        if (ci.slow) {
-            speed = USB_SPEED_LOW;
-        } else {
-            speed = USB_SPEED_HIGH;
-        }
-    }
-    dev->dev.speed = speed;
-    dev->dev.speedmask = (1 << speed);
-    if (dev->dev.speed == USB_SPEED_HIGH && usb_linux_full_speed_compat(dev)) {
-        dev->dev.speedmask |= USB_SPEED_MASK_FULL;
-    }
-
-    trace_usb_host_open_success(bus_num, addr);
-
-    if (!prod_name || prod_name[0] == '\0') {
-        snprintf(dev->dev.product_desc, sizeof(dev->dev.product_desc),
-                 "host:%d.%d", bus_num, addr);
-    } else {
-        pstrcpy(dev->dev.product_desc, sizeof(dev->dev.product_desc),
-                prod_name);
-    }
-
-    ret = usb_device_attach(&dev->dev);
-    if (ret) {
-        goto fail;
-    }
-
-    /* USB devio uses 'write' flag to check for async completions */
-    qemu_set_fd_handler(dev->fd, NULL, async_complete, dev);
-
-    return 0;
-
-fail:
-    trace_usb_host_open_failure(bus_num, addr);
-    if (dev->fd != -1) {
-        close(dev->fd);
-        dev->fd = -1;
-    }
-    return -1;
-}
-
-static int usb_host_close(USBHostDevice *dev)
-{
-    int i;
-
-    if (dev->fd == -1) {
-        return -1;
-    }
-
-    trace_usb_host_close(dev->bus_num, dev->addr);
-
-    qemu_set_fd_handler(dev->fd, NULL, NULL, NULL);
-    dev->closing = 1;
-    for (i = 1; i <= USB_MAX_ENDPOINTS; i++) {
-        if (is_isoc(dev, USB_TOKEN_IN, i)) {
-            usb_host_stop_n_free_iso(dev, USB_TOKEN_IN, i);
-        }
-        if (is_isoc(dev, USB_TOKEN_OUT, i)) {
-            usb_host_stop_n_free_iso(dev, USB_TOKEN_OUT, i);
-        }
-    }
-    async_complete(dev);
-    dev->closing = 0;
-    if (dev->dev.attached) {
-        usb_device_detach(&dev->dev);
-    }
-    usb_host_do_reset(dev);
-    close(dev->fd);
-    dev->fd = -1;
-    return 0;
-}
-
-static void usb_host_exit_notifier(struct Notifier *n, void *data)
-{
-    USBHostDevice *s = container_of(n, USBHostDevice, exit);
-
-    usb_host_release_port(s);
-    if (s->fd != -1) {
-        usb_host_do_reset(s);;
-    }
-}
-
-static int usb_host_initfn(USBDevice *dev)
-{
-    USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
-
-    dev->auto_attach = 0;
-    s->fd = -1;
-    s->hub_fd = -1;
-
-    QTAILQ_INSERT_TAIL(&hostdevs, s, next);
-    s->exit.notify = usb_host_exit_notifier;
-    qemu_add_exit_notifier(&s->exit);
-    usb_host_auto_check(NULL);
-
-    if (s->match.bus_num != 0 && s->match.port != NULL) {
-        usb_host_claim_port(s);
-    }
-    return 0;
-}
-
-static const VMStateDescription vmstate_usb_host = {
-    .name = "usb-host",
-    .unmigratable = 1,
-};
-
-static Property usb_host_dev_properties[] = {
-    DEFINE_PROP_UINT32("hostbus",  USBHostDevice, match.bus_num,    0),
-    DEFINE_PROP_UINT32("hostaddr", USBHostDevice, match.addr,       0),
-    DEFINE_PROP_STRING("hostport", USBHostDevice, match.port),
-    DEFINE_PROP_HEX32("vendorid",  USBHostDevice, match.vendor_id,  0),
-    DEFINE_PROP_HEX32("productid", USBHostDevice, match.product_id, 0),
-    DEFINE_PROP_UINT32("isobufs",  USBHostDevice, iso_urb_count,    4),
-    DEFINE_PROP_END_OF_LIST(),
-};
-
-static void usb_host_class_initfn(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
-
-    uc->init           = usb_host_initfn;
-    uc->product_desc   = "USB Host Device";
-    uc->cancel_packet  = usb_host_async_cancel;
-    uc->handle_data    = usb_host_handle_data;
-    uc->handle_control = usb_host_handle_control;
-    uc->handle_reset   = usb_host_handle_reset;
-    uc->handle_destroy = usb_host_handle_destroy;
-    dc->vmsd = &vmstate_usb_host;
-    dc->props = usb_host_dev_properties;
-}
-
-static TypeInfo usb_host_dev_info = {
-    .name          = "usb-host",
-    .parent        = TYPE_USB_DEVICE,
-    .instance_size = sizeof(USBHostDevice),
-    .class_init    = usb_host_class_initfn,
-};
-
-static void usb_host_register_types(void)
-{
-    type_register_static(&usb_host_dev_info);
-    usb_legacy_register("usb-host", "host", usb_host_device_open);
-}
-
-type_init(usb_host_register_types)
-
-USBDevice *usb_host_device_open(USBBus *bus, const char *devname)
-{
-    struct USBAutoFilter filter;
-    USBDevice *dev;
-    char *p;
-
-    dev = usb_create(bus, "usb-host");
-
-    if (strstr(devname, "auto:")) {
-        if (parse_filter(devname, &filter) < 0) {
-            goto fail;
-        }
-    } else {
-        if ((p = strchr(devname, '.'))) {
-            filter.bus_num    = strtoul(devname, NULL, 0);
-            filter.addr       = strtoul(p + 1, NULL, 0);
-            filter.vendor_id  = 0;
-            filter.product_id = 0;
-        } else if ((p = strchr(devname, ':'))) {
-            filter.bus_num    = 0;
-            filter.addr       = 0;
-            filter.vendor_id  = strtoul(devname, NULL, 16);
-            filter.product_id = strtoul(p + 1, NULL, 16);
-        } else {
-            goto fail;
-        }
-    }
-
-    qdev_prop_set_uint32(&dev->qdev, "hostbus",   filter.bus_num);
-    qdev_prop_set_uint32(&dev->qdev, "hostaddr",  filter.addr);
-    qdev_prop_set_uint32(&dev->qdev, "vendorid",  filter.vendor_id);
-    qdev_prop_set_uint32(&dev->qdev, "productid", filter.product_id);
-    qdev_init_nofail(&dev->qdev);
-    return dev;
-
-fail:
-    qdev_free(&dev->qdev);
-    return NULL;
-}
-
-int usb_host_device_close(const char *devname)
-{
-#if 0
-    char product_name[PRODUCT_NAME_SZ];
-    int bus_num, addr;
-    USBHostDevice *s;
-
-    if (strstr(devname, "auto:")) {
-        return usb_host_auto_del(devname);
-    }
-    if (usb_host_find_device(&bus_num, &addr, product_name,
-                                    sizeof(product_name), devname) < 0) {
-        return -1;
-    }
-    s = hostdev_find(bus_num, addr);
-    if (s) {
-        usb_device_delete_addr(s->bus_num, s->dev.addr);
-        return 0;
-    }
-#endif
-
-    return -1;
-}
-
-/*
- * Read sys file-system device file
- *
- * @line address of buffer to put file contents in
- * @line_size size of line
- * @device_file path to device file (printf format string)
- * @device_name device being opened (inserted into device_file)
- *
- * @return 0 failed, 1 succeeded ('line' contains data)
- */
-static int usb_host_read_file(char *line, size_t line_size,
-                              const char *device_file, const char *device_name)
-{
-    FILE *f;
-    int ret = 0;
-    char filename[PATH_MAX];
-
-    snprintf(filename, PATH_MAX, "/sys/bus/usb/devices/%s/%s", device_name,
-             device_file);
-    f = fopen(filename, "r");
-    if (f) {
-        ret = fgets(line, line_size, f) != NULL;
-        fclose(f);
-    }
-
-    return ret;
-}
-
-/*
- * Use /sys/bus/usb/devices/ directory to determine host's USB
- * devices.
- *
- * This code is based on Robert Schiele's original patches posted to
- * the Novell bug-tracker https://bugzilla.novell.com/show_bug.cgi?id=241950
- */
-static int usb_host_scan(void *opaque, USBScanFunc *func)
-{
-    DIR *dir = NULL;
-    char line[1024];
-    int bus_num, addr, speed, class_id, product_id, vendor_id;
-    int ret = 0;
-    char port[MAX_PORTLEN];
-    char product_name[512];
-    struct dirent *de;
-
-    dir = opendir("/sys/bus/usb/devices");
-    if (!dir) {
-        perror("husb: opendir /sys/bus/usb/devices");
-        fprintf(stderr, "husb: please make sure sysfs is mounted at /sys\n");
-        goto the_end;
-    }
-
-    while ((de = readdir(dir))) {
-        if (de->d_name[0] != '.' && !strchr(de->d_name, ':')) {
-            if (sscanf(de->d_name, "%d-%7[0-9.]", &bus_num, port) < 2) {
-                continue;
-            }
-
-            if (!usb_host_read_file(line, sizeof(line), "devnum", de->d_name)) {
-                goto the_end;
-            }
-            if (sscanf(line, "%d", &addr) != 1) {
-                goto the_end;
-            }
-            if (!usb_host_read_file(line, sizeof(line), "bDeviceClass",
-                                    de->d_name)) {
-                goto the_end;
-            }
-            if (sscanf(line, "%x", &class_id) != 1) {
-                goto the_end;
-            }
-
-            if (!usb_host_read_file(line, sizeof(line), "idVendor",
-                                    de->d_name)) {
-                goto the_end;
-            }
-            if (sscanf(line, "%x", &vendor_id) != 1) {
-                goto the_end;
-            }
-            if (!usb_host_read_file(line, sizeof(line), "idProduct",
-                                    de->d_name)) {
-                goto the_end;
-            }
-            if (sscanf(line, "%x", &product_id) != 1) {
-                goto the_end;
-            }
-            if (!usb_host_read_file(line, sizeof(line), "product",
-                                    de->d_name)) {
-                *product_name = 0;
-            } else {
-                if (strlen(line) > 0) {
-                    line[strlen(line) - 1] = '\0';
-                }
-                pstrcpy(product_name, sizeof(product_name), line);
-            }
-
-            if (!usb_host_read_file(line, sizeof(line), "speed", de->d_name)) {
-                goto the_end;
-            }
-            if (!strcmp(line, "5000\n")) {
-                speed = USB_SPEED_SUPER;
-            } else if (!strcmp(line, "480\n")) {
-                speed = USB_SPEED_HIGH;
-            } else if (!strcmp(line, "1.5\n")) {
-                speed = USB_SPEED_LOW;
-            } else {
-                speed = USB_SPEED_FULL;
-            }
-
-            ret = func(opaque, bus_num, addr, port, class_id, vendor_id,
-                       product_id, product_name, speed);
-            if (ret) {
-                goto the_end;
-            }
-        }
-    }
- the_end:
-    if (dir) {
-        closedir(dir);
-    }
-    return ret;
-}
-
-static QEMUTimer *usb_auto_timer;
-
-static int usb_host_auto_scan(void *opaque, int bus_num,
-                              int addr, const char *port,
-                              int class_id, int vendor_id, int product_id,
-                              const char *product_name, int speed)
-{
-    struct USBAutoFilter *f;
-    struct USBHostDevice *s;
-
-    /* Ignore hubs */
-    if (class_id == 9)
-        return 0;
-
-    QTAILQ_FOREACH(s, &hostdevs, next) {
-        f = &s->match;
-
-        if (f->bus_num > 0 && f->bus_num != bus_num) {
-            continue;
-        }
-        if (f->addr > 0 && f->addr != addr) {
-            continue;
-        }
-        if (f->port != NULL && (port == NULL || strcmp(f->port, port) != 0)) {
-            continue;
-        }
-
-        if (f->vendor_id > 0 && f->vendor_id != vendor_id) {
-            continue;
-        }
-
-        if (f->product_id > 0 && f->product_id != product_id) {
-            continue;
-        }
-        /* We got a match */
-        s->seen++;
-        if (s->errcount >= 3) {
-            return 0;
-        }
-
-        /* Already attached ? */
-        if (s->fd != -1) {
-            return 0;
-        }
-        DPRINTF("husb: auto open: bus_num %d addr %d\n", bus_num, addr);
-
-        if (usb_host_open(s, bus_num, addr, port, product_name, speed) < 0) {
-            s->errcount++;
-        }
-        break;
-    }
-
-    return 0;
-}
-
-static void usb_host_auto_check(void *unused)
-{
-    struct USBHostDevice *s;
-    int unconnected = 0;
-
-    usb_host_scan(NULL, usb_host_auto_scan);
-
-    QTAILQ_FOREACH(s, &hostdevs, next) {
-        if (s->fd == -1) {
-            unconnected++;
-        }
-        if (s->seen == 0) {
-            s->errcount = 0;
-        }
-        s->seen = 0;
-    }
-
-    if (unconnected == 0) {
-        /* nothing to watch */
-        if (usb_auto_timer) {
-            qemu_del_timer(usb_auto_timer);
-            trace_usb_host_auto_scan_disabled();
-        }
-        return;
-    }
-
-    if (!usb_auto_timer) {
-        usb_auto_timer = qemu_new_timer_ms(rt_clock, usb_host_auto_check, NULL);
-        if (!usb_auto_timer) {
-            return;
-        }
-        trace_usb_host_auto_scan_enabled();
-    }
-    qemu_mod_timer(usb_auto_timer, qemu_get_clock_ms(rt_clock) + 2000);
-}
-
-/*
- * Autoconnect filter
- * Format:
- *    auto:bus:dev[:vid:pid]
- *    auto:bus.dev[:vid:pid]
- *
- *    bus  - bus number    (dec, * means any)
- *    dev  - device number (dec, * means any)
- *    vid  - vendor id     (hex, * means any)
- *    pid  - product id    (hex, * means any)
- *
- *    See 'lsusb' output.
- */
-static int parse_filter(const char *spec, struct USBAutoFilter *f)
-{
-    enum { BUS, DEV, VID, PID, DONE };
-    const char *p = spec;
-    int i;
-
-    f->bus_num    = 0;
-    f->addr       = 0;
-    f->vendor_id  = 0;
-    f->product_id = 0;
-
-    for (i = BUS; i < DONE; i++) {
-        p = strpbrk(p, ":.");
-        if (!p) {
-            break;
-        }
-        p++;
-
-        if (*p == '*') {
-            continue;
-        }
-        switch(i) {
-        case BUS: f->bus_num = strtol(p, NULL, 10);    break;
-        case DEV: f->addr    = strtol(p, NULL, 10);    break;
-        case VID: f->vendor_id  = strtol(p, NULL, 16); break;
-        case PID: f->product_id = strtol(p, NULL, 16); break;
-        }
-    }
-
-    if (i < DEV) {
-        fprintf(stderr, "husb: invalid auto filter spec %s\n", spec);
-        return -1;
-    }
-
-    return 0;
-}
-
-/**********************/
-/* USB host device info */
-
-struct usb_class_info {
-    int class;
-    const char *class_name;
-};
-
-static const struct usb_class_info usb_class_info[] = {
-    { USB_CLASS_AUDIO, "Audio"},
-    { USB_CLASS_COMM, "Communication"},
-    { USB_CLASS_HID, "HID"},
-    { USB_CLASS_HUB, "Hub" },
-    { USB_CLASS_PHYSICAL, "Physical" },
-    { USB_CLASS_PRINTER, "Printer" },
-    { USB_CLASS_MASS_STORAGE, "Storage" },
-    { USB_CLASS_CDC_DATA, "Data" },
-    { USB_CLASS_APP_SPEC, "Application Specific" },
-    { USB_CLASS_VENDOR_SPEC, "Vendor Specific" },
-    { USB_CLASS_STILL_IMAGE, "Still Image" },
-    { USB_CLASS_CSCID, "Smart Card" },
-    { USB_CLASS_CONTENT_SEC, "Content Security" },
-    { -1, NULL }
-};
-
-static const char *usb_class_str(uint8_t class)
-{
-    const struct usb_class_info *p;
-    for(p = usb_class_info; p->class != -1; p++) {
-        if (p->class == class) {
-            break;
-        }
-    }
-    return p->class_name;
-}
-
-static void usb_info_device(Monitor *mon, int bus_num,
-                            int addr, const char *port,
-                            int class_id, int vendor_id, int product_id,
-                            const char *product_name,
-                            int speed)
-{
-    const char *class_str, *speed_str;
-
-    switch(speed) {
-    case USB_SPEED_LOW:
-        speed_str = "1.5";
-        break;
-    case USB_SPEED_FULL:
-        speed_str = "12";
-        break;
-    case USB_SPEED_HIGH:
-        speed_str = "480";
-        break;
-    case USB_SPEED_SUPER:
-        speed_str = "5000";
-        break;
-    default:
-        speed_str = "?";
-        break;
-    }
-
-    monitor_printf(mon, "  Bus %d, Addr %d, Port %s, Speed %s Mb/s\n",
-                   bus_num, addr, port, speed_str);
-    class_str = usb_class_str(class_id);
-    if (class_str) {
-        monitor_printf(mon, "    %s:", class_str);
-    } else {
-        monitor_printf(mon, "    Class %02x:", class_id);
-    }
-    monitor_printf(mon, " USB device %04x:%04x", vendor_id, product_id);
-    if (product_name[0] != '\0') {
-        monitor_printf(mon, ", %s", product_name);
-    }
-    monitor_printf(mon, "\n");
-}
-
-static int usb_host_info_device(void *opaque, int bus_num, int addr,
-                                const char *path, int class_id,
-                                int vendor_id, int product_id,
-                                const char *product_name,
-                                int speed)
-{
-    Monitor *mon = opaque;
-
-    usb_info_device(mon, bus_num, addr, path, class_id, vendor_id, product_id,
-                    product_name, speed);
-    return 0;
-}
-
-static void dec2str(int val, char *str, size_t size)
-{
-    if (val == 0) {
-        snprintf(str, size, "*");
-    } else {
-        snprintf(str, size, "%d", val);
-    }
-}
-
-static void hex2str(int val, char *str, size_t size)
-{
-    if (val == 0) {
-        snprintf(str, size, "*");
-    } else {
-        snprintf(str, size, "%04x", val);
-    }
-}
-
-void usb_host_info(Monitor *mon)
-{
-    struct USBAutoFilter *f;
-    struct USBHostDevice *s;
-
-    usb_host_scan(mon, usb_host_info_device);
-
-    if (QTAILQ_EMPTY(&hostdevs)) {
-        return;
-    }
-
-    monitor_printf(mon, "  Auto filters:\n");
-    QTAILQ_FOREACH(s, &hostdevs, next) {
-        char bus[10], addr[10], vid[10], pid[10];
-        f = &s->match;
-        dec2str(f->bus_num, bus, sizeof(bus));
-        dec2str(f->addr, addr, sizeof(addr));
-        hex2str(f->vendor_id, vid, sizeof(vid));
-        hex2str(f->product_id, pid, sizeof(pid));
-        monitor_printf(mon, "    Bus %s, Addr %s, Port %s, ID %s:%s\n",
-                       bus, addr, f->port ? f->port : "*", vid, pid);
-    }
-}