Revert series: virtiofsd: Announce submounts to the guest

This reverts the following commits due to their basis on a bogus
linux kernel header update:

c93a656f7b65 ("tests/acceptance: Add virtiofs_submounts.py")
45ced7ca2f27 ("tests/acceptance/boot_linux: Accept SSH pubkey")
08dce386e77e ("virtiofsd: Announce sub-mount points")
eba8b096c17c ("virtiofsd: Store every lo_inode's parent_dev")
ede24b6be798 ("virtiofsd: Add fuse_reply_attr_with_flags()")
e2577435d343 ("virtiofsd: Add attr_flags to fuse_entry_param")
2f10415abfc5 ("virtiofsd: Announce FUSE_ATTR_FLAGS")
97d741cc96dd ("linux/fuse.h: Pull in from Linux")

Cc: Max Reitz <mreitz@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 160385090886.20017.13382256442750027666.stgit@gimli.home
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

6 files changed, 6 insertions, 637 deletions

diff --git a/tests/acceptance/boot_linux.py b/tests/acceptance/boot_linux.py
index 1da4a53d6a..c743e231f4 100644
--- a/tests/acceptance/boot_linux.py
+++ b/tests/acceptance/boot_linux.py
@@ -57,7 +57,7 @@ class BootLinuxBase(Test):
             self.cancel('Failed to download/prepare boot image')
         return boot.path
 
-    def download_cloudinit(self, ssh_pubkey=None):
+    def download_cloudinit(self):
         self.log.info('Preparing cloudinit image')
         try:
             cloudinit_iso = os.path.join(self.workdir, 'cloudinit.iso')
@@ -67,8 +67,7 @@ class BootLinuxBase(Test):
                           password='password',
                           # QEMU's hard coded usermode router address
                           phone_home_host='10.0.2.2',
-                          phone_home_port=self.phone_home_port,
-                          authorized_key=ssh_pubkey)
+                          phone_home_port=self.phone_home_port)
         except Exception:
             self.cancel('Failed to prepared cloudinit image')
         return cloudinit_iso
@@ -81,19 +80,19 @@ class BootLinux(BootLinuxBase):
     timeout = 900
     chksum = None
 
-    def setUp(self, ssh_pubkey=None):
+    def setUp(self):
         super(BootLinux, self).setUp()
         self.vm.add_args('-smp', '2')
         self.vm.add_args('-m', '1024')
         self.prepare_boot()
-        self.prepare_cloudinit(ssh_pubkey)
+        self.prepare_cloudinit()
 
     def prepare_boot(self):
         path = self.download_boot()
         self.vm.add_args('-drive', 'file=%s' % path)
 
-    def prepare_cloudinit(self, ssh_pubkey=None):
-        cloudinit_iso = self.download_cloudinit(ssh_pubkey)
+    def prepare_cloudinit(self):
+        cloudinit_iso = self.download_cloudinit()
         self.vm.add_args('-drive', 'file=%s,format=raw' % cloudinit_iso)
 
     def launch_and_wait(self):
diff --git a/tests/acceptance/virtiofs_submounts.py b/tests/acceptance/virtiofs_submounts.py
deleted file mode 100644
index 8b207b3e57..0000000000
--- a/tests/acceptance/virtiofs_submounts.py
+++ /dev/null
@@ -1,289 +0,0 @@
-import logging
-import re
-import os
-import subprocess
-import time
-
-from avocado import skipUnless
-from avocado_qemu import Test, BUILD_DIR
-from avocado_qemu import wait_for_console_pattern
-from avocado.utils import ssh
-
-from qemu.accel import kvm_available
-
-from boot_linux import BootLinux
-
-
-def run_cmd(args):
-    subp = subprocess.Popen(args,
-                            stdout=subprocess.PIPE,
-                            stderr=subprocess.PIPE,
-                            universal_newlines=True)
-    stdout, stderr = subp.communicate()
-    ret = subp.returncode
-
-    return (stdout, stderr, ret)
-
-def has_passwordless_sudo():
-    """
-    This function is for use in a @avocado.skipUnless decorator, e.g.:
-
-        @skipUnless(*has_passwordless_sudo())
-        def test_something_that_needs_sudo(self):
-            ...
-    """
-
-    _, stderr, exitcode = run_cmd(('sudo', '-n', 'true'))
-    if exitcode != 0:
-        return (False, f'Failed to use sudo -n: {stderr.strip()}')
-    else:
-        return (True, '')
-
-
-class VirtiofsSubmountsTest(BootLinux):
-    """
-    :avocado: tags=arch:x86_64
-    """
-
-    def get_portfwd(self):
-        port = None
-
-        res = self.vm.command('human-monitor-command',
-                              command_line='info usernet')
-        for line in res.split('\r\n'):
-            match = \
-                re.search(r'TCP.HOST_FORWARD.*127\.0\.0\.1\s*(\d+)\s+10\.',
-                          line)
-            if match is not None:
-                port = match[1]
-                break
-
-        self.assertIsNotNone(port)
-        self.log.debug('sshd listening on port: ' + port)
-        return port
-
-    def ssh_connect(self, username, keyfile):
-        self.ssh_logger = logging.getLogger('ssh')
-        port = self.get_portfwd()
-        self.ssh_session = ssh.Session('127.0.0.1', port=int(port),
-                                       user=username, key=keyfile)
-        for i in range(10):
-            try:
-                self.ssh_session.connect()
-                return
-            except:
-                time.sleep(4)
-                pass
-        self.fail('sshd timeout')
-
-    def ssh_command(self, command):
-        self.ssh_logger.info(command)
-        result = self.ssh_session.cmd(command)
-        stdout_lines = [line.rstrip() for line
-                        in result.stdout_text.splitlines()]
-        for line in stdout_lines:
-            self.ssh_logger.info(line)
-        stderr_lines = [line.rstrip() for line
-                        in result.stderr_text.splitlines()]
-        for line in stderr_lines:
-            self.ssh_logger.warning(line)
-
-        self.assertEqual(result.exit_status, 0,
-                         f'Guest command failed: {command}')
-        return stdout_lines, stderr_lines
-
-    def run(self, args, ignore_error=False):
-        stdout, stderr, ret = run_cmd(args)
-
-        if ret != 0:
-            cmdline = ' '.join(args)
-            if not ignore_error:
-                self.fail(f'{cmdline}: Returned {ret}: {stderr}')
-            else:
-                self.log.warn(f'{cmdline}: Returned {ret}: {stderr}')
-
-        return (stdout, stderr, ret)
-
-    def set_up_shared_dir(self):
-        atwd = os.getenv('AVOCADO_TEST_WORKDIR')
-        self.shared_dir = os.path.join(atwd, 'virtiofs-shared')
-
-        os.mkdir(self.shared_dir)
-
-        self.run(('cp', self.get_data('guest.sh'),
-                 os.path.join(self.shared_dir, 'check.sh')))
-
-        self.run(('cp', self.get_data('guest-cleanup.sh'),
-                 os.path.join(self.shared_dir, 'cleanup.sh')))
-
-    def set_up_virtiofs(self):
-        attmp = os.getenv('AVOCADO_TESTS_COMMON_TMPDIR')
-        self.vfsdsock = os.path.join(attmp, 'vfsdsock')
-
-        self.run(('sudo', '-n', 'rm', '-f', self.vfsdsock), ignore_error=True)
-
-        self.virtiofsd = \
-            subprocess.Popen(('sudo', '-n',
-                              'tools/virtiofsd/virtiofsd',
-                              f'--socket-path={self.vfsdsock}',
-                              '-o', f'source={self.shared_dir}',
-                              '-o', 'cache=always',
-                              '-o', 'xattr',
-                              '-o', 'announce_submounts',
-                              '-f'),
-                             stdout=subprocess.DEVNULL,
-                             stderr=subprocess.PIPE,
-                             universal_newlines=True)
-
-        while not os.path.exists(self.vfsdsock):
-            if self.virtiofsd.poll() is not None:
-                self.fail('virtiofsd exited prematurely: ' +
-                          self.virtiofsd.communicate()[1])
-            time.sleep(0.1)
-
-        self.run(('sudo', '-n', 'chmod', 'go+rw', self.vfsdsock))
-
-        self.vm.add_args('-chardev',
-                         f'socket,id=vfsdsock,path={self.vfsdsock}',
-                         '-device',
-                         'vhost-user-fs-pci,queue-size=1024,chardev=vfsdsock' \
-                             ',tag=host',
-                         '-object',
-                         'memory-backend-file,id=mem,size=1G,' \
-                             'mem-path=/dev/shm,share=on',
-                         '-numa',
-                         'node,memdev=mem')
-
-    def launch_vm(self):
-        self.launch_and_wait()
-        self.ssh_connect('root', self.ssh_key)
-
-    def set_up_nested_mounts(self):
-        scratch_dir = os.path.join(self.shared_dir, 'scratch')
-        try:
-            os.mkdir(scratch_dir)
-        except FileExistsError:
-            pass
-
-        args = ['bash', self.get_data('host.sh'), scratch_dir]
-        if self.seed:
-            args += [self.seed]
-
-        out, _, _ = self.run(args)
-        seed = re.search(r'^Seed: \d+', out)
-        self.log.info(seed[0])
-
-    def mount_in_guest(self):
-        self.ssh_command('mkdir -p /mnt/host')
-        self.ssh_command('mount -t virtiofs host /mnt/host')
-
-    def check_in_guest(self):
-        self.ssh_command('bash /mnt/host/check.sh /mnt/host/scratch/share')
-
-    def live_cleanup(self):
-        self.ssh_command('bash /mnt/host/cleanup.sh /mnt/host/scratch')
-
-        # It would be nice if the above was sufficient to make virtiofsd clear
-        # all references to the mounted directories (so they can be unmounted
-        # on the host), but unfortunately it is not.  To do so, we have to
-        # resort to a remount.
-        self.ssh_command('mount -o remount /mnt/host')
-
-        scratch_dir = os.path.join(self.shared_dir, 'scratch')
-        self.run(('bash', self.get_data('cleanup.sh'), scratch_dir))
-
-    @skipUnless(*has_passwordless_sudo())
-    def setUp(self):
-        vmlinuz = self.params.get('vmlinuz')
-        if vmlinuz is None:
-            self.cancel('vmlinuz parameter not set; you must point it to a '
-                        'Linux kernel binary to test (to run this test with ' \
-                        'the on-image kernel, set it to an empty string)')
-
-        self.seed = self.params.get('seed')
-
-        atwd = os.getenv('AVOCADO_TEST_WORKDIR')
-        self.ssh_key = os.path.join(atwd, 'id_ed25519')
-
-        self.run(('ssh-keygen', '-t', 'ed25519', '-f', self.ssh_key))
-
-        pubkey = open(self.ssh_key + '.pub').read()
-
-        super(VirtiofsSubmountsTest, self).setUp(pubkey)
-
-        if len(vmlinuz) > 0:
-            self.vm.add_args('-kernel', vmlinuz,
-                             '-append', 'console=ttyS0 root=/dev/sda1')
-
-        # Allow us to connect to SSH
-        self.vm.add_args('-netdev', 'user,id=vnet,hostfwd=:127.0.0.1:0-:22',
-                         '-device', 'e1000,netdev=vnet')
-
-        if not kvm_available(self.arch, self.qemu_bin):
-            self.cancel(KVM_NOT_AVAILABLE)
-        self.vm.add_args('-accel', 'kvm')
-
-    def tearDown(self):
-        try:
-            self.vm.shutdown()
-        except:
-            pass
-
-        scratch_dir = os.path.join(self.shared_dir, 'scratch')
-        self.run(('bash', self.get_data('cleanup.sh'), scratch_dir),
-                 ignore_error=True)
-
-    def test_pre_virtiofsd_set_up(self):
-        self.set_up_shared_dir()
-
-        self.set_up_nested_mounts()
-
-        self.set_up_virtiofs()
-        self.launch_vm()
-        self.mount_in_guest()
-        self.check_in_guest()
-
-    def test_pre_launch_set_up(self):
-        self.set_up_shared_dir()
-        self.set_up_virtiofs()
-
-        self.set_up_nested_mounts()
-
-        self.launch_vm()
-        self.mount_in_guest()
-        self.check_in_guest()
-
-    def test_post_launch_set_up(self):
-        self.set_up_shared_dir()
-        self.set_up_virtiofs()
-        self.launch_vm()
-
-        self.set_up_nested_mounts()
-
-        self.mount_in_guest()
-        self.check_in_guest()
-
-    def test_post_mount_set_up(self):
-        self.set_up_shared_dir()
-        self.set_up_virtiofs()
-        self.launch_vm()
-        self.mount_in_guest()
-
-        self.set_up_nested_mounts()
-
-        self.check_in_guest()
-
-    def test_two_runs(self):
-        self.set_up_shared_dir()
-
-        self.set_up_nested_mounts()
-
-        self.set_up_virtiofs()
-        self.launch_vm()
-        self.mount_in_guest()
-        self.check_in_guest()
-
-        self.live_cleanup()
-        self.set_up_nested_mounts()
-
-        self.check_in_guest()
diff --git a/tests/acceptance/virtiofs_submounts.py.data/cleanup.sh b/tests/acceptance/virtiofs_submounts.py.data/cleanup.sh
deleted file mode 100644
index 2a6579a0fe..0000000000
--- a/tests/acceptance/virtiofs_submounts.py.data/cleanup.sh
+++ /dev/null
@@ -1,46 +0,0 @@
-#!/bin/bash
-
-function print_usage()
-{
-    if [ -n "$2" ]; then
-        echo "Error: $2"
-        echo
-    fi
-    echo "Usage: $1 <scratch dir>"
-}
-
-scratch_dir=$1
-if [ -z "$scratch_dir" ]; then
-    print_usage "$0" 'Scratch dir not given' >&2
-    exit 1
-fi
-
-cd "$scratch_dir/share" || exit 1
-mps=(mnt*)
-mp_i=0
-for mp in "${mps[@]}"; do
-    mp_i=$((mp_i + 1))
-    printf "Unmounting %i/%i...\r" "$mp_i" "${#mps[@]}"
-
-    sudo umount -R "$mp"
-    rm -rf "$mp"
-done
-echo
-
-rm some-file
-cd ..
-rmdir share
-
-imgs=(fs*.img)
-img_i=0
-for img in "${imgs[@]}"; do
-    img_i=$((img_i + 1))
-    printf "Detaching and deleting %i/%i...\r" "$img_i" "${#imgs[@]}"
-
-    dev=$(losetup -j "$img" | sed -e 's/:.*//')
-    sudo losetup -d "$dev"
-    rm -f "$img"
-done
-echo
-
-echo 'Done.'
diff --git a/tests/acceptance/virtiofs_submounts.py.data/guest-cleanup.sh b/tests/acceptance/virtiofs_submounts.py.data/guest-cleanup.sh
deleted file mode 100644
index 729cb2d1a5..0000000000
--- a/tests/acceptance/virtiofs_submounts.py.data/guest-cleanup.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/bash
-
-function print_usage()
-{
-    if [ -n "$2" ]; then
-        echo "Error: $2"
-        echo
-    fi
-    echo "Usage: $1 <scratch dir>"
-}
-
-scratch_dir=$1
-if [ -z "$scratch_dir" ]; then
-    print_usage "$0" 'Scratch dir not given' >&2
-    exit 1
-fi
-
-cd "$scratch_dir/share" || exit 1
-
-mps=(mnt*)
-mp_i=0
-for mp in "${mps[@]}"; do
-    mp_i=$((mp_i + 1))
-    printf "Unmounting %i/%i...\r" "$mp_i" "${#mps[@]}"
-
-    sudo umount -R "$mp"
-done
-echo
-
-echo 'Done.'
diff --git a/tests/acceptance/virtiofs_submounts.py.data/guest.sh b/tests/acceptance/virtiofs_submounts.py.data/guest.sh
deleted file mode 100644
index 59ba40fde1..0000000000
--- a/tests/acceptance/virtiofs_submounts.py.data/guest.sh
+++ /dev/null
@@ -1,138 +0,0 @@
-#!/bin/bash
-
-function print_usage()
-{
-    if [ -n "$2" ]; then
-        echo "Error: $2"
-        echo
-    fi
-    echo "Usage: $1 <shared dir>"
-    echo '(The shared directory is the "share" directory in the scratch' \
-         'directory)'
-}
-
-shared_dir=$1
-if [ -z "$shared_dir" ]; then
-    print_usage "$0" 'Shared dir not given' >&2
-    exit 1
-fi
-
-cd "$shared_dir"
-
-# FIXME: This should not be necessary, but it is.  In order for all
-# submounts to be proper mount points, we need to visit them.
-# (Before we visit them, they will not be auto-mounted, and so just
-# appear as normal directories, with the catch that their st_ino will
-# be the st_ino of the filesystem they host, while the st_dev will
-# still be the st_dev of the parent.)
-# `find` does not work, because it will refuse to touch the mount
-# points as long as they are not mounted; their st_dev being shared
-# with the parent and st_ino just being the root node's inode ID
-# will practically ensure that this node exists elsewhere on the
-# filesystem, and `find` is required to recognize loops and not to
-# follow them.
-# Thus, we have to manually visit all nodes first.
-
-mnt_i=0
-
-function recursively_visit()
-{
-    pushd "$1" >/dev/null
-    for entry in *; do
-        if [[ "$entry" == mnt* ]]; then
-            mnt_i=$((mnt_i + 1))
-            printf "Triggering auto-mount $mnt_i...\r"
-        fi
-
-        if [ -d "$entry" ]; then
-            recursively_visit "$entry"
-        fi
-    done
-    popd >/dev/null
-}
-
-recursively_visit .
-echo
-
-
-if [ -n "$(find -name not-mounted)" ]; then
-    echo "Error: not-mounted files visible on mount points:" >&2
-    find -name not-mounted >&2
-    exit 1
-fi
-
-if [ ! -f some-file -o "$(cat some-file)" != 'root' ]; then
-    echo "Error: Bad file in the share root" >&2
-    exit 1
-fi
-
-shopt -s nullglob
-
-function check_submounts()
-{
-    local base_path=$1
-
-    for mp in mnt*; do
-        printf "Checking submount %i...\r" "$((${#devs[@]} + 1))"
-
-        mp_i=$(echo "$mp" | sed -e 's/mnt//')
-        dev=$(stat -c '%D' "$mp")
-
-        if [ -n "${devs[mp_i]}" ]; then
-            echo "Error: $mp encountered twice" >&2
-            exit 1
-        fi
-        devs[mp_i]=$dev
-
-        pushd "$mp" >/dev/null
-        path="$base_path$mp"
-        while true; do
-            expected_content="$(printf '%s\n%s\n' "$mp_i" "$path")"
-            if [ ! -f some-file ]; then
-                echo "Error: $PWD/some-file does not exist" >&2
-                exit 1
-            fi
-
-            if [ "$(cat some-file)" != "$expected_content" ]; then
-                echo "Error: Bad content in $PWD/some-file:" >&2
-                echo '--- found ---'
-                cat some-file
-                echo '--- expected ---'
-                echo "$expected_content"
-                exit 1
-            fi
-            if [ "$(stat -c '%D' some-file)" != "$dev" ]; then
-                echo "Error: $PWD/some-file has the wrong device ID" >&2
-                exit 1
-            fi
-
-            if [ -d sub ]; then
-                if [ "$(stat -c '%D' sub)" != "$dev" ]; then
-                    echo "Error: $PWD/some-file has the wrong device ID" >&2
-                    exit 1
-                fi
-                cd sub
-                path="$path/sub"
-            else
-                if [ -n "$(echo mnt*)" ]; then
-                    check_submounts "$path/"
-                fi
-                break
-            fi
-        done
-        popd >/dev/null
-    done
-}
-
-root_dev=$(stat -c '%D' some-file)
-devs=()
-check_submounts ''
-echo
-
-reused_devs=$(echo "$root_dev ${devs[@]}" | tr ' ' '\n' | sort | uniq -d)
-if [ -n "$reused_devs" ]; then
-    echo "Error: Reused device IDs: $reused_devs" >&2
-    exit 1
-fi
-
-echo "Test passed for ${#devs[@]} submounts."
diff --git a/tests/acceptance/virtiofs_submounts.py.data/host.sh b/tests/acceptance/virtiofs_submounts.py.data/host.sh
deleted file mode 100644
index d8a9afebdb..0000000000
--- a/tests/acceptance/virtiofs_submounts.py.data/host.sh
+++ /dev/null
@@ -1,127 +0,0 @@
-#!/bin/bash
-
-mount_count=128
-
-function print_usage()
-{
-    if [ -n "$2" ]; then
-        echo "Error: $2"
-        echo
-    fi
-    echo "Usage: $1 <scratch dir> [seed]"
-    echo "(If no seed is given, it will be randomly generated.)"
-}
-
-scratch_dir=$1
-if [ -z "$scratch_dir" ]; then
-    print_usage "$0" 'No scratch dir given' >&2
-    exit 1
-fi
-
-if [ ! -d "$scratch_dir" ]; then
-    print_usage "$0" "$scratch_dir is not a directory" >&2
-    exit 1
-fi
-
-seed=$2
-if [ -z "$seed" ]; then
-    seed=$RANDOM
-fi
-RANDOM=$seed
-
-echo "Seed: $seed"
-
-set -e
-shopt -s nullglob
-
-cd "$scratch_dir"
-if [ -d share ]; then
-    echo 'Error: This directory seems to be in use already' >&2
-    exit 1
-fi
-
-for ((i = 0; i < $mount_count; i++)); do
-    printf "Setting up fs %i/%i...\r" "$((i + 1))" "$mount_count"
-
-    rm -f fs$i.img
-    truncate -s 512M fs$i.img
-    mkfs.xfs -q fs$i.img
-    devs[i]=$(sudo losetup -f --show fs$i.img)
-done
-echo
-
-top_level_mounts=$((RANDOM % mount_count + 1))
-
-mkdir -p share
-echo 'root' > share/some-file
-
-for ((i = 0; i < $top_level_mounts; i++)); do
-    printf "Mounting fs %i/%i...\r" "$((i + 1))" "$mount_count"
-
-    mkdir -p share/mnt$i
-    touch share/mnt$i/not-mounted
-    sudo mount "${devs[i]}" share/mnt$i
-    sudo chown "$(id -u):$(id -g)" share/mnt$i
-
-    pushd share/mnt$i >/dev/null
-    path=mnt$i
-    nesting=$((RANDOM % 4))
-    for ((j = 0; j < $nesting; j++)); do
-        cat > some-file <<EOF
-$i
-$path
-EOF
-        mkdir sub
-        cd sub
-        path="$path/sub"
-    done
-cat > some-file <<EOF
-$i
-$path
-EOF
-    popd >/dev/null
-done
-
-for ((; i < $mount_count; i++)); do
-    printf "Mounting fs %i/%i...\r" "$((i + 1))" "$mount_count"
-
-    mp_i=$((i % top_level_mounts))
-
-    pushd share/mnt$mp_i >/dev/null
-    path=mnt$mp_i
-    while true; do
-        sub_mp="$(echo mnt*)"
-        if cd sub 2>/dev/null; then
-            path="$path/sub"
-        elif [ -n "$sub_mp" ] && cd "$sub_mp" 2>/dev/null; then
-            path="$path/$sub_mp"
-        else
-            break
-        fi
-    done
-    mkdir mnt$i
-    touch mnt$i/not-mounted
-    sudo mount "${devs[i]}" mnt$i
-    sudo chown "$(id -u):$(id -g)" mnt$i
-
-    cd mnt$i
-    path="$path/mnt$i"
-    nesting=$((RANDOM % 4))
-    for ((j = 0; j < $nesting; j++)); do
-        cat > some-file <<EOF
-$i
-$path
-EOF
-        mkdir sub
-        cd sub
-        path="$path/sub"
-    done
-    cat > some-file <<EOF
-$i
-$path
-EOF
-    popd >/dev/null
-done
-echo
-
-echo 'Done.'