Merge remote-tracking branch 'kwolf/for-anthony' into staging

# By Kevin Wolf (7) and Fam Zheng (3)
# Via Kevin Wolf
* kwolf/for-anthony:
  qemu-iotests: fix 017 018 for vmdk
  qemu-iotests: exclude vmdk and qcow from 043
  qemu-iotests: exclude vmdk for test 042
  qtest/ide-test: Test short and long PRDTs
  qtest/ide-test: Add simple DMA read/write test case
  qtest: Add IDE test case
  libqos/pci: Enable bus mastering
  ide: Reset BMIDEA bit when the bus master is stopped
  de_DE.po: Add missing leading spaces
  ahci: Don't allow creating slave drives

Message-id: 1368023344-29731-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

9 files changed, 453 insertions, 7 deletions

diff --git a/tests/Makefile b/tests/Makefile
index bf41d10050..a307d5a952 100644
--- a/tests/Makefile
+++ b/tests/Makefile
@@ -51,6 +51,7 @@ check-block-$(CONFIG_POSIX) += tests/qemu-iotests-quick.sh
 # really in libqtest, not in the testcases themselves.
 check-qtest-i386-y = tests/fdc-test$(EXESUF)
 gcov-files-i386-y = hw/fdc.c
+check-qtest-i386-y += tests/ide-test$(EXESUF)
 check-qtest-i386-y += tests/hd-geo-test$(EXESUF)
 gcov-files-i386-y += hw/hd-geometry.c
 check-qtest-i386-y += tests/rtc-test$(EXESUF)
@@ -127,6 +128,7 @@ libqos-omap-obj-y = $(libqos-obj-y) tests/libqos/i2c-omap.o
 tests/rtc-test$(EXESUF): tests/rtc-test.o
 tests/m48t59-test$(EXESUF): tests/m48t59-test.o
 tests/fdc-test$(EXESUF): tests/fdc-test.o
+tests/ide-test$(EXESUF): tests/ide-test.o $(libqos-pc-obj-y)
 tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o
 tests/tmp105-test$(EXESUF): tests/tmp105-test.o $(libqos-omap-obj-y)
 tests/i440fx-test$(EXESUF): tests/i440fx-test.o $(libqos-pc-obj-y)
diff --git a/tests/ide-test.c b/tests/ide-test.c
new file mode 100644
index 0000000000..bdc1da7dfe
--- /dev/null
+++ b/tests/ide-test.c
@@ -0,0 +1,440 @@
+/*
+ * IDE test cases
+ *
+ * Copyright (c) 2013 Kevin Wolf <kwolf@redhat.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <stdio.h>
+
+#include <glib.h>
+
+#include "libqtest.h"
+#include "libqos/pci-pc.h"
+#include "libqos/malloc-pc.h"
+
+#include "qemu-common.h"
+#include "hw/pci/pci_ids.h"
+#include "hw/pci/pci_regs.h"
+
+#define TEST_IMAGE_SIZE 64 * 1024 * 1024
+
+#define IDE_PCI_DEV     1
+#define IDE_PCI_FUNC    1
+
+#define IDE_BASE 0x1f0
+#define IDE_PRIMARY_IRQ 14
+
+enum {
+    reg_data        = 0x0,
+    reg_nsectors    = 0x2,
+    reg_lba_low     = 0x3,
+    reg_lba_middle  = 0x4,
+    reg_lba_high    = 0x5,
+    reg_device      = 0x6,
+    reg_status      = 0x7,
+    reg_command     = 0x7,
+};
+
+enum {
+    BSY     = 0x80,
+    DRDY    = 0x40,
+    DF      = 0x20,
+    DRQ     = 0x08,
+    ERR     = 0x01,
+};
+
+enum {
+    LBA     = 0x40,
+};
+
+enum {
+    bmreg_cmd       = 0x0,
+    bmreg_status    = 0x2,
+    bmreg_prdt      = 0x4,
+};
+
+enum {
+    CMD_READ_DMA    = 0xc8,
+    CMD_WRITE_DMA   = 0xca,
+    CMD_IDENTIFY    = 0xec,
+
+    CMDF_ABORT      = 0x100,
+};
+
+enum {
+    BM_CMD_START    =  0x1,
+    BM_CMD_WRITE    =  0x8, /* write = from device to memory */
+};
+
+enum {
+    BM_STS_ACTIVE   =  0x1,
+    BM_STS_ERROR    =  0x2,
+    BM_STS_INTR     =  0x4,
+};
+
+enum {
+    PRDT_EOT        = 0x80000000,
+};
+
+#define assert_bit_set(data, mask) g_assert_cmphex((data) & (mask), ==, (mask))
+#define assert_bit_clear(data, mask) g_assert_cmphex((data) & (mask), ==, 0)
+
+static QPCIBus *pcibus = NULL;
+static QGuestAllocator *guest_malloc;
+
+static char tmp_path[] = "/tmp/qtest.XXXXXX";
+
+static void ide_test_start(const char *cmdline_fmt, ...)
+{
+    va_list ap;
+    char *cmdline;
+
+    va_start(ap, cmdline_fmt);
+    cmdline = g_strdup_vprintf(cmdline_fmt, ap);
+    va_end(ap);
+
+    qtest_start(cmdline);
+    qtest_irq_intercept_in(global_qtest, "ioapic");
+    guest_malloc = pc_alloc_init();
+}
+
+static void ide_test_quit(void)
+{
+    qtest_quit(global_qtest);
+}
+
+static QPCIDevice *get_pci_device(uint16_t *bmdma_base)
+{
+    QPCIDevice *dev;
+    uint16_t vendor_id, device_id;
+
+    if (!pcibus) {
+        pcibus = qpci_init_pc();
+    }
+
+    /* Find PCI device and verify it's the right one */
+    dev = qpci_device_find(pcibus, QPCI_DEVFN(IDE_PCI_DEV, IDE_PCI_FUNC));
+    g_assert(dev != NULL);
+
+    vendor_id = qpci_config_readw(dev, PCI_VENDOR_ID);
+    device_id = qpci_config_readw(dev, PCI_DEVICE_ID);
+    g_assert(vendor_id == PCI_VENDOR_ID_INTEL);
+    g_assert(device_id == PCI_DEVICE_ID_INTEL_82371SB_1);
+
+    /* Map bmdma BAR */
+    *bmdma_base = (uint16_t)(uintptr_t) qpci_iomap(dev, 4);
+
+    qpci_device_enable(dev);
+
+    return dev;
+}
+
+static void free_pci_device(QPCIDevice *dev)
+{
+    /* libqos doesn't have a function for this, so free it manually */
+    g_free(dev);
+}
+
+typedef struct PrdtEntry {
+    uint32_t addr;
+    uint32_t size;
+} QEMU_PACKED PrdtEntry;
+
+#define assert_bit_set(data, mask) g_assert_cmphex((data) & (mask), ==, (mask))
+#define assert_bit_clear(data, mask) g_assert_cmphex((data) & (mask), ==, 0)
+
+static int send_dma_request(int cmd, uint64_t sector, int nb_sectors,
+                            PrdtEntry *prdt, int prdt_entries)
+{
+    QPCIDevice *dev;
+    uint16_t bmdma_base;
+    uintptr_t guest_prdt;
+    size_t len;
+    bool from_dev;
+    uint8_t status;
+    int flags;
+
+    dev = get_pci_device(&bmdma_base);
+
+    flags = cmd & ~0xff;
+    cmd &= 0xff;
+
+    switch (cmd) {
+    case CMD_READ_DMA:
+        from_dev = true;
+        break;
+    case CMD_WRITE_DMA:
+        from_dev = false;
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    /* Select device 0 */
+    outb(IDE_BASE + reg_device, 0 | LBA);
+
+    /* Stop any running transfer, clear any pending interrupt */
+    outb(bmdma_base + bmreg_cmd, 0);
+    outb(bmdma_base + bmreg_status, BM_STS_INTR);
+
+    /* Setup PRDT */
+    len = sizeof(*prdt) * prdt_entries;
+    guest_prdt = guest_alloc(guest_malloc, len);
+    memwrite(guest_prdt, prdt, len);
+    outl(bmdma_base + bmreg_prdt, guest_prdt);
+
+    /* ATA DMA command */
+    outb(IDE_BASE + reg_nsectors, nb_sectors);
+
+    outb(IDE_BASE + reg_lba_low,    sector & 0xff);
+    outb(IDE_BASE + reg_lba_middle, (sector >> 8) & 0xff);
+    outb(IDE_BASE + reg_lba_high,   (sector >> 16) & 0xff);
+
+    outb(IDE_BASE + reg_command, cmd);
+
+    /* Start DMA transfer */
+    outb(bmdma_base + bmreg_cmd, BM_CMD_START | (from_dev ? BM_CMD_WRITE : 0));
+
+    if (flags & CMDF_ABORT) {
+        outb(bmdma_base + bmreg_cmd, 0);
+    }
+
+    /* Wait for the DMA transfer to complete */
+    do {
+        status = inb(bmdma_base + bmreg_status);
+    } while ((status & (BM_STS_ACTIVE | BM_STS_INTR)) == BM_STS_ACTIVE);
+
+    g_assert_cmpint(get_irq(IDE_PRIMARY_IRQ), ==, !!(status & BM_STS_INTR));
+
+    /* Check IDE status code */
+    assert_bit_set(inb(IDE_BASE + reg_status), DRDY);
+    assert_bit_clear(inb(IDE_BASE + reg_status), BSY | DRQ);
+
+    /* Reading the status register clears the IRQ */
+    g_assert(!get_irq(IDE_PRIMARY_IRQ));
+
+    /* Stop DMA transfer if still active */
+    if (status & BM_STS_ACTIVE) {
+        outb(bmdma_base + bmreg_cmd, 0);
+    }
+
+    free_pci_device(dev);
+
+    return status;
+}
+
+static void test_bmdma_simple_rw(void)
+{
+    uint8_t status;
+    uint8_t *buf;
+    uint8_t *cmpbuf;
+    size_t len = 512;
+    uintptr_t guest_buf = guest_alloc(guest_malloc, len);
+
+    PrdtEntry prdt[] = {
+        { .addr = guest_buf, .size = len | PRDT_EOT },
+    };
+
+    buf = g_malloc(len);
+    cmpbuf = g_malloc(len);
+
+    /* Write 0x55 pattern to sector 0 */
+    memset(buf, 0x55, len);
+    memwrite(guest_buf, buf, len);
+
+    status = send_dma_request(CMD_WRITE_DMA, 0, 1, prdt, ARRAY_SIZE(prdt));
+    g_assert_cmphex(status, ==, BM_STS_INTR);
+    assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+
+    /* Write 0xaa pattern to sector 1 */
+    memset(buf, 0xaa, len);
+    memwrite(guest_buf, buf, len);
+
+    status = send_dma_request(CMD_WRITE_DMA, 1, 1, prdt, ARRAY_SIZE(prdt));
+    g_assert_cmphex(status, ==, BM_STS_INTR);
+    assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+
+    /* Read and verify 0x55 pattern in sector 0 */
+    memset(cmpbuf, 0x55, len);
+
+    status = send_dma_request(CMD_READ_DMA, 0, 1, prdt, ARRAY_SIZE(prdt));
+    g_assert_cmphex(status, ==, BM_STS_INTR);
+    assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+
+    memread(guest_buf, buf, len);
+    g_assert(memcmp(buf, cmpbuf, len) == 0);
+
+    /* Read and verify 0xaa pattern in sector 1 */
+    memset(cmpbuf, 0xaa, len);
+
+    status = send_dma_request(CMD_READ_DMA, 1, 1, prdt, ARRAY_SIZE(prdt));
+    g_assert_cmphex(status, ==, BM_STS_INTR);
+    assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+
+    memread(guest_buf, buf, len);
+    g_assert(memcmp(buf, cmpbuf, len) == 0);
+
+
+    g_free(buf);
+    g_free(cmpbuf);
+}
+
+static void test_bmdma_short_prdt(void)
+{
+    uint8_t status;
+
+    PrdtEntry prdt[] = {
+        { .addr = 0, .size = 0x10 | PRDT_EOT },
+    };
+
+    /* Normal request */
+    status = send_dma_request(CMD_READ_DMA, 0, 1,
+                              prdt, ARRAY_SIZE(prdt));
+    g_assert_cmphex(status, ==, 0);
+    assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+
+    /* Abort the request before it completes */
+    status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 1,
+                              prdt, ARRAY_SIZE(prdt));
+    g_assert_cmphex(status, ==, 0);
+    assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+}
+
+static void test_bmdma_long_prdt(void)
+{
+    uint8_t status;
+
+    PrdtEntry prdt[] = {
+        { .addr = 0, .size = 0x1000 | PRDT_EOT },
+    };
+
+    /* Normal request */
+    status = send_dma_request(CMD_READ_DMA, 0, 1,
+                              prdt, ARRAY_SIZE(prdt));
+    g_assert_cmphex(status, ==, BM_STS_ACTIVE | BM_STS_INTR);
+    assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+
+    /* Abort the request before it completes */
+    status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 1,
+                              prdt, ARRAY_SIZE(prdt));
+    g_assert_cmphex(status, ==, BM_STS_INTR);
+    assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+}
+
+static void test_bmdma_setup(void)
+{
+    ide_test_start(
+        "-vnc none "
+        "-drive file=%s,if=ide,serial=%s,cache=writeback "
+        "-global ide-hd.ver=%s",
+        tmp_path, "testdisk", "version");
+}
+
+static void test_bmdma_teardown(void)
+{
+    ide_test_quit();
+}
+
+static void test_identify(void)
+{
+    uint8_t data;
+    uint16_t buf[256];
+    int i;
+    int ret;
+
+    ide_test_start(
+        "-vnc none "
+        "-drive file=%s,if=ide,serial=%s,cache=writeback "
+        "-global ide-hd.ver=%s",
+        tmp_path, "testdisk", "version");
+
+    /* IDENTIFY command on device 0*/
+    outb(IDE_BASE + reg_device, 0);
+    outb(IDE_BASE + reg_command, CMD_IDENTIFY);
+
+    /* Read in the IDENTIFY buffer and check registers */
+    data = inb(IDE_BASE + reg_device);
+    g_assert_cmpint(data & 0x10, ==, 0);
+
+    for (i = 0; i < 256; i++) {
+        data = inb(IDE_BASE + reg_status);
+        assert_bit_set(data, DRDY | DRQ);
+        assert_bit_clear(data, BSY | DF | ERR);
+
+        ((uint16_t*) buf)[i] = inw(IDE_BASE + reg_data);
+    }
+
+    data = inb(IDE_BASE + reg_status);
+    assert_bit_set(data, DRDY);
+    assert_bit_clear(data, BSY | DF | ERR | DRQ);
+
+    /* Check serial number/version in the buffer */
+    ret = memcmp(&buf[10], "ettsidks            ", 20);
+    g_assert(ret == 0);
+
+    ret = memcmp(&buf[23], "evsroi n", 8);
+    g_assert(ret == 0);
+
+    /* Write cache enabled bit */
+    assert_bit_set(buf[85], 0x20);
+
+    ide_test_quit();
+}
+
+int main(int argc, char **argv)
+{
+    const char *arch = qtest_get_arch();
+    int fd;
+    int ret;
+
+    /* Check architecture */
+    if (strcmp(arch, "i386") && strcmp(arch, "x86_64")) {
+        g_test_message("Skipping test for non-x86\n");
+        return 0;
+    }
+
+    /* Create a temporary raw image */
+    fd = mkstemp(tmp_path);
+    g_assert(fd >= 0);
+    ret = ftruncate(fd, TEST_IMAGE_SIZE);
+    g_assert(ret == 0);
+    close(fd);
+
+    /* Run the tests */
+    g_test_init(&argc, &argv, NULL);
+
+    qtest_add_func("/ide/identify", test_identify);
+
+    qtest_add_func("/ide/bmdma/setup", test_bmdma_setup);
+    qtest_add_func("/ide/bmdma/simple_rw", test_bmdma_simple_rw);
+    qtest_add_func("/ide/bmdma/short_prdt", test_bmdma_short_prdt);
+    qtest_add_func("/ide/bmdma/long_prdt", test_bmdma_long_prdt);
+    qtest_add_func("/ide/bmdma/teardown", test_bmdma_teardown);
+
+    ret = g_test_run();
+
+    /* Cleanup */
+    unlink(tmp_path);
+
+    return ret;
+}
diff --git a/tests/libqos/pci.c b/tests/libqos/pci.c
index 95e287be65..7e0907b514 100644
--- a/tests/libqos/pci.c
+++ b/tests/libqos/pci.c
@@ -71,7 +71,7 @@ void qpci_device_enable(QPCIDevice *dev)
 
     /* FIXME -- does this need to be a bus callout? */
     cmd = qpci_config_readw(dev, PCI_COMMAND);
-    cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+    cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
     qpci_config_writew(dev, PCI_COMMAND, cmd);
 }
 
diff --git a/tests/qemu-iotests/017 b/tests/qemu-iotests/017
index 66951eb1a8..45f2c0b055 100755
--- a/tests/qemu-iotests/017
+++ b/tests/qemu-iotests/017
@@ -46,6 +46,8 @@ _supported_os Linux
 
 TEST_OFFSETS="0 4294967296"
 
+TEST_IMG_SAVE=$TEST_IMG
+TEST_IMG=$TEST_IMG.base
 _make_test_img 6G
 
 echo "Filling base image"
@@ -63,7 +65,7 @@ _check_test_img
 echo "Creating test image with backing file"
 echo
 
-mv $TEST_IMG $TEST_IMG.base
+TEST_IMG=$TEST_IMG_SAVE
 _make_test_img -b $TEST_IMG.base 6G
 
 echo "Filling test image"
diff --git a/tests/qemu-iotests/017.out b/tests/qemu-iotests/017.out
index a861e58331..df34ee78c4 100644
--- a/tests/qemu-iotests/017.out
+++ b/tests/qemu-iotests/017.out
@@ -1,5 +1,5 @@
 QA output created by 017
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=6442450944 
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=6442450944
 Filling base image
 
 === IO: pattern 0
diff --git a/tests/qemu-iotests/018 b/tests/qemu-iotests/018
index bd2db78715..453ce61e75 100755
--- a/tests/qemu-iotests/018
+++ b/tests/qemu-iotests/018
@@ -46,6 +46,8 @@ _supported_os Linux
 
 TEST_OFFSETS="0 4294967296"
 
+TEST_IMG_SAVE=$TEST_IMG
+TEST_IMG=$TEST_IMG.base
 _make_test_img 6G
 
 echo "Filling base image"
@@ -63,7 +65,7 @@ _check_test_img
 echo "Creating test image with backing file"
 echo
 
-mv $TEST_IMG $TEST_IMG.base
+TEST_IMG=$TEST_IMG_SAVE
 _make_test_img -b $TEST_IMG.base 6G
 
 echo "Filling test image"
diff --git a/tests/qemu-iotests/018.out b/tests/qemu-iotests/018.out
index 6bbd815ce7..3ddb8d8f6f 100644
--- a/tests/qemu-iotests/018.out
+++ b/tests/qemu-iotests/018.out
@@ -1,5 +1,5 @@
 QA output created by 018
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=6442450944 
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=6442450944
 Filling base image
 
 === IO: pattern 0
diff --git a/tests/qemu-iotests/042 b/tests/qemu-iotests/042
index c3c3ca8d02..16b2fdbd5e 100755
--- a/tests/qemu-iotests/042
+++ b/tests/qemu-iotests/042
@@ -38,7 +38,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
 . ./common.rc
 . ./common.filter
 
-_supported_fmt qcow2 qcow qed vmdk
+_supported_fmt qcow2 qcow qed
 _supported_proto file
 _supported_os Linux
 
diff --git a/tests/qemu-iotests/043 b/tests/qemu-iotests/043
index 3ba08dc94e..478773d102 100755
--- a/tests/qemu-iotests/043
+++ b/tests/qemu-iotests/043
@@ -40,7 +40,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
 . ./common.filter
 
 # Any format supporting backing files
-_supported_fmt qcow qcow2 vmdk qed
+_supported_fmt qcow2 qed
 _supported_proto generic
 _supported_os Linux