ppc/pnv: Test pnv i2c master and connected devices

Tests the following for both P9 and P10:
  - I2C master POR status
  - I2C master status after immediate reset

Tests the following for powernv10-ranier only:
  - Config pca9552 hotplug device pins as inputs then
    Read the INPUT0/1 registers to verify all pins are high
  - Connected GPIO pin tests of P10 PCA9552 device.  Tests
    output of pins 0-4 affect input of pins 5-9 respectively.
  - PCA9554 GPIO pins test.  Tests input and ouput functionality.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>

1 files changed, 80 insertions, 0 deletions

diff --git a/tests/qtest/pnv-xscom.h b/tests/qtest/pnv-xscom.h
new file mode 100644
index 0000000000..6f62941744
--- /dev/null
+++ b/tests/qtest/pnv-xscom.h
@@ -0,0 +1,80 @@
+/*
+ * PowerNV XSCOM Bus
+ *
+ * Copyright (c) 2024, IBM Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef PNV_XSCOM_H
+#define PNV_XSCOM_H
+
+#define SMT                     4 /* some tests will break if less than 4 */
+
+typedef enum PnvChipType {
+    PNV_CHIP_POWER8E,     /* AKA Murano (default) */
+    PNV_CHIP_POWER8,      /* AKA Venice */
+    PNV_CHIP_POWER8NVL,   /* AKA Naples */
+    PNV_CHIP_POWER9,      /* AKA Nimbus */
+    PNV_CHIP_POWER10,
+} PnvChipType;
+
+typedef struct PnvChip {
+    PnvChipType chip_type;
+    const char *cpu_model;
+    uint64_t    xscom_base;
+    uint64_t    cfam_id;
+    uint32_t    first_core;
+    uint32_t    num_i2c;
+} PnvChip;
+
+static const PnvChip pnv_chips[] = {
+    {
+        .chip_type  = PNV_CHIP_POWER8,
+        .cpu_model  = "POWER8",
+        .xscom_base = 0x0003fc0000000000ull,
+        .cfam_id    = 0x220ea04980000000ull,
+        .first_core = 0x1,
+        .num_i2c    = 0,
+    }, {
+        .chip_type  = PNV_CHIP_POWER8NVL,
+        .cpu_model  = "POWER8NVL",
+        .xscom_base = 0x0003fc0000000000ull,
+        .cfam_id    = 0x120d304980000000ull,
+        .first_core = 0x1,
+        .num_i2c    = 0,
+    },
+    {
+        .chip_type  = PNV_CHIP_POWER9,
+        .cpu_model  = "POWER9",
+        .xscom_base = 0x000603fc00000000ull,
+        .cfam_id    = 0x220d104900008000ull,
+        .first_core = 0x0,
+        .num_i2c    = 4,
+    },
+    {
+        .chip_type  = PNV_CHIP_POWER10,
+        .cpu_model  = "POWER10",
+        .xscom_base = 0x000603fc00000000ull,
+        .cfam_id    = 0x120da04900008000ull,
+        .first_core = 0x0,
+        .num_i2c    = 4,
+    },
+};
+
+static inline uint64_t pnv_xscom_addr(const PnvChip *chip, uint32_t pcba)
+{
+    uint64_t addr = chip->xscom_base;
+
+    if (chip->chip_type == PNV_CHIP_POWER10) {
+        addr |= ((uint64_t) pcba << 3);
+    } else if (chip->chip_type == PNV_CHIP_POWER9) {
+        addr |= ((uint64_t) pcba << 3);
+    } else {
+        addr |= (((uint64_t) pcba << 4) & ~0xffull) |
+            (((uint64_t) pcba << 3) & 0x78);
+    }
+    return addr;
+}
+
+#endif /* PNV_XSCOM_H */