iotests: Extend test 066

066 was supposed to be a test "for discarding preallocated zero
clusters", but it did so incompletely: While it did check the image
file's integrity after the operation, it did not confirm that the
clusters are indeed freed. This patch adds this test.

In addition, new cases for writing to preallocated zero clusters are
added.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

1 files changed, 127 insertions, 1 deletions

diff --git a/tests/qemu-iotests/066 b/tests/qemu-iotests/066
index c2116a3088..8638217736 100755
--- a/tests/qemu-iotests/066
+++ b/tests/qemu-iotests/066
@@ -1,6 +1,6 @@
 #!/bin/bash
 #
-# Test case for discarding preallocated zero clusters in qcow2
+# Test case for preallocated zero clusters in qcow2
 #
 # Copyright (C) 2013 Red Hat, Inc.
 #
@@ -55,8 +55,134 @@ _make_test_img $IMG_SIZE
 $QEMU_IO -c "write 0 256k" -c "write -z 0 256k" -c "write 64M 512" \
 	 -c "discard 0 $IMG_SIZE" -c "read -P 0 0 $IMG_SIZE" "$TEST_IMG" \
          | _filter_qemu_io
+
 # Check the image (there shouldn't be any leaks)
 _check_test_img
+# Map the image (we want all clusters to be gone)
+$QEMU_IMG map "$TEST_IMG"
+
+_cleanup_test_img
+
+
+echo
+echo '=== Writing to preallocated zero clusters ==='
+echo
+
+_make_test_img $IMG_SIZE
+
+# Create data clusters (not aligned to an L2 table)
+$QEMU_IO -c 'write -P 42 1M 256k' "$TEST_IMG" | _filter_qemu_io
+orig_map=$($QEMU_IMG map --output=json "$TEST_IMG")
+
+# Convert the data clusters to preallocated zero clusters
+$QEMU_IO -c 'write -z 1M 256k' "$TEST_IMG" | _filter_qemu_io
+
+# Now write to them (with a COW needed for the head and tail)
+$QEMU_IO -c "write -P 23 $(((1024 + 32) * 1024)) 192k" "$TEST_IMG" \
+    | _filter_qemu_io
+
+# Check metadata correctness
+_check_test_img
+
+# Check data correctness
+$QEMU_IO -c "read -P  0 $(( 1024             * 1024)) 32k" \
+         -c "read -P 23 $(((1024 + 32)       * 1024)) 192k" \
+         -c "read -P  0 $(((1024 + 32 + 192) * 1024)) 32k" \
+         "$TEST_IMG" \
+         | _filter_qemu_io
+
+# Check that we have actually reused the original area
+new_map=$($QEMU_IMG map --output=json "$TEST_IMG")
+if [ "$new_map" = "$orig_map" ]; then
+    echo 'Successfully reused original clusters.'
+else
+    echo 'Failed to reuse original clusters.'
+    echo 'Original map:'
+    echo "$orig_map"
+    echo 'New map:'
+    echo "$new_map"
+fi
+
+_cleanup_test_img
+
+
+echo
+echo '=== Writing to a snapshotted preallocated zero cluster ==='
+echo
+
+_make_test_img 64k
+
+# Create a preallocated zero cluster
+$QEMU_IO -c 'write -P 42 0 64k' -c 'write -z 0 64k' "$TEST_IMG" \
+    | _filter_qemu_io
+
+# Snapshot it
+$QEMU_IMG snapshot -c foo "$TEST_IMG"
+
+# Write to the cluster
+$QEMU_IO -c 'write -P 23 0 64k' "$TEST_IMG" | _filter_qemu_io
+
+# Check metadata correctness
+_check_test_img
+
+# Check data correctness
+$QEMU_IO -c 'read -P 23 0 64k' "$TEST_IMG" | _filter_qemu_io
+$QEMU_IMG snapshot -a foo "$TEST_IMG"
+$QEMU_IO -c 'read -P 0 0 64k' "$TEST_IMG" | _filter_qemu_io
+
+_cleanup_test_img
+
+
+echo
+echo '=== Consecutive write to a preallocated zero cluster ==='
+echo
+
+_make_test_img 192k
+
+# Create three normal clusters
+$QEMU_IO -c 'write -P 42 0 192k' "$TEST_IMG" | _filter_qemu_io
+orig_map=$($QEMU_IMG map --output=json "$TEST_IMG")
+
+# Make the middle cluster a preallocated zero cluster
+$QEMU_IO -c 'write -z 64k 64k' "$TEST_IMG" | _filter_qemu_io
+
+# Try to overwrite everything: This should reuse the whole range. To test that
+# this only issues a single continuous write request, use blkdebug.
+$QEMU_IO -c 'write -P 42 0 192k' \
+    "json:{
+        'driver': '$IMGFMT',
+        'file': {
+            'driver': 'blkdebug',
+            'image.filename': '$TEST_IMG',
+            'set-state': [{
+                'event': 'write_aio',
+                'new_state': 2
+            }],
+            'inject-error': [{
+                'event': 'write_aio',
+                'state': 2
+            }]
+        }
+    }" \
+    | _filter_qemu_io
+
+# Check metadata correctness
+_check_test_img
+
+# Check that we have actually reused the original area
+new_map=$($QEMU_IMG map --output=json "$TEST_IMG")
+if [ "$new_map" = "$orig_map" ]; then
+    echo 'Successfully reused original clusters.'
+else
+    echo 'Failed to reuse original clusters.'
+    echo 'Original map:'
+    echo "$orig_map"
+    echo 'New map:'
+    echo "$new_map"
+fi
+
+_cleanup_test_img
+
 
 # success, all done
 echo "*** done"