hw/usb/hcd-ohci: Fix #1510, #303: pid not IN or OUT

This changes the ohci validation to not assert if invalid data is fed to the
ohci controller. The poc in https://bugs.launchpad.net/qemu/+bug/1907042 and
migrated to bug #303 does the following to feed it a SETUP pid (valid)
at an EndPt of 1 (invalid - all SETUP pids must be addressed to EndPt 0):

        uint32_t MaxPacket = 64;
        uint32_t TDFormat = 0;
        uint32_t Skip = 0;
        uint32_t Speed = 0;
        uint32_t Direction = 0;  /* #define OHCI_TD_DIR_SETUP 0 */
        uint32_t EndPt = 1;
        uint32_t FuncAddress = 0;
        ed->attr = (MaxPacket << 16) | (TDFormat << 15) | (Skip << 14)
                   | (Speed << 13) | (Direction << 11) | (EndPt << 7)
                   | FuncAddress;
        ed->tailp = /*TDQTailPntr= */ 0;
        ed->headp = ((/*TDQHeadPntr= */ &td[0]) & 0xfffffff0)
                   | (/* ToggleCarry= */ 0 << 1);
        ed->next_ed = (/* NextED= */ 0 & 0xfffffff0)

qemu-fuzz also caught the same issue in #1510. They are both fixed by this
patch.

With a tiny OS[1] that boots and executes the poc the repro shows the issue:

* OS that sends USB requests to a USB mass storage device
  but sends a SETUP with EndPt = 1
* qemu 6.2.0 (Debian 1:6.2+dfsg-2ubuntu6.19)
* qemu HEAD (4e66a0854)
* Actual OHCI controller (hardware)

Command line:
qemu-system-x86_64 -m 20 \
 -device pci-ohci,id=ohci \
 -drive if=none,format=raw,id=d,file=testmbr.raw \
 -device usb-storage,bus=ohci.0,drive=d \
 --trace "usb_*" --trace "ohci_*" -D qemu.log

Results are:

 qemu 6.2.0 | qemu HEAD | actual HW
------------+-----------+----------------
 assertion  | assertion | sets stall bit

The assertion message is:

> qemu-system-x86_64: ../../hw/usb/core.c:744: usb_ep_get: Assertion `pid == USB_TOKEN_IN || pid == USB_TOKEN_OUT' failed.
> Aborted (core dumped)

Tip: if the flags "-serial pty -serial stdio" are added to the command line
the poc outputs its USB requests like this:

> Free mem 2M ohci port0 conn FS
> setup { 80 6 0 1 0 0 8 0 }
> ED info=80000 { mps=8 en=0 d=0 } tail=c20920
>   td0 c20880 nxt=c20960 f2000000 setup cbp=c20900 be=c20907       cbp=0 be=c20907
>   td1 c20960 nxt=c20980 f3140000    in cbp=c20908 be=c2090f       cbp=0 be=c2090f
>   td2 c20980 nxt=c20920 f3080000   out cbp=0 be=0                 cbp=0 be=0
>    rx { 12 1 0 2 0 0 0 8 }
> setup { 0 5 1 0 0 0 0 0 } tx {}
> ED info=80000 { mps=8 en=0 d=0 } tail=c20880
>   td0 c20920 nxt=c20960 f2000000 setup cbp=c20900 be=c20907       cbp=0 be=c20907
>   td1 c20960 nxt=c20880 f3100000    in cbp=0 be=0                 cbp=0 be=0
> setup { 80 6 0 1 0 0 12 0 }
> ED info=80081 { mps=8 en=0 d=1 } tail=c20960
>   td0 c20880 nxt=c209c0 f2000000 setup cbp=c20920 be=c20927
>   td1 c209c0 nxt=c209e0 f3140000    in cbp=c20928 be=c20939
>   td2 c209e0 nxt=c20960 f3080000   out cbp=0 be=0qemu-system-x86_64: ../../hw/usb/core.c:744: usb_ep_get: Assertion `pid == USB_TOKEN_IN || pid == USB_TOKEN_OUT' failed.
> Aborted (core dumped)

[1] The OS disk image has been emailed to philmd@linaro.org, mjt@tls.msk.ru,
and kraxel@redhat.com:

* testBadSetup.img.xz
* sha256: 045b43f4396de02b149518358bf8025d5ba11091e86458875339fc649e6e5ac6

Signed-off-by: David Hubbard <dmamfmgm@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: authorship and signed-off-by tag names fixed up as
 per on-list agreement]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

0 files changed, 0 insertions, 0 deletions