target/arm/cpu64: max cpu: Support sve properties with KVM

Extend the SVE vq map initialization and validation with KVM's
supported vector lengths when KVM is enabled. In order to determine
and select supported lengths we add two new KVM functions for getting
and setting the KVM_REG_ARM64_SVE_VLS pseudo-register.

This patch has been co-authored with Richard Henderson, who reworked
the target/arm/cpu64.c changes in order to push all the validation and
auto-enabling/disabling steps into the finalizer, resulting in a nice
LOC reduction.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Message-id: 20191031142734.8590-9-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 131 insertions, 41 deletions

diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index a771a28daa..c161a146ff 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -273,9 +273,18 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
      * any of the above.  Finally, if SVE is not disabled, then at least one
      * vector length must be enabled.
      */
+    DECLARE_BITMAP(kvm_supported, ARM_MAX_VQ);
     DECLARE_BITMAP(tmp, ARM_MAX_VQ);
     uint32_t vq, max_vq = 0;
 
+    /* Collect the set of vector lengths supported by KVM. */
+    bitmap_zero(kvm_supported, ARM_MAX_VQ);
+    if (kvm_enabled() && kvm_arm_sve_supported(CPU(cpu))) {
+        kvm_arm_sve_get_vls(CPU(cpu), kvm_supported);
+    } else if (kvm_enabled()) {
+        assert(!cpu_isar_feature(aa64_sve, cpu));
+    }
+
     /*
      * Process explicit sve<N> properties.
      * From the properties, sve_vq_map<N> implies sve_vq_init<N>.
@@ -293,10 +302,19 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
             return;
         }
 
-        /* Propagate enabled bits down through required powers-of-two. */
-        for (vq = pow2floor(max_vq); vq >= 1; vq >>= 1) {
-            if (!test_bit(vq - 1, cpu->sve_vq_init)) {
-                set_bit(vq - 1, cpu->sve_vq_map);
+        if (kvm_enabled()) {
+            /*
+             * For KVM we have to automatically enable all supported unitialized
+             * lengths, even when the smaller lengths are not all powers-of-two.
+             */
+            bitmap_andnot(tmp, kvm_supported, cpu->sve_vq_init, max_vq);
+            bitmap_or(cpu->sve_vq_map, cpu->sve_vq_map, tmp, max_vq);
+        } else {
+            /* Propagate enabled bits down through required powers-of-two. */
+            for (vq = pow2floor(max_vq); vq >= 1; vq >>= 1) {
+                if (!test_bit(vq - 1, cpu->sve_vq_init)) {
+                    set_bit(vq - 1, cpu->sve_vq_map);
+                }
             }
         }
     } else if (cpu->sve_max_vq == 0) {
@@ -308,23 +326,45 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
             return;
         }
 
-        /* Disabling a power-of-two disables all larger lengths. */
-        if (test_bit(0, cpu->sve_vq_init)) {
-            error_setg(errp, "cannot disable sve128");
-            error_append_hint(errp, "Disabling sve128 results in all vector "
-                              "lengths being disabled.\n");
-            error_append_hint(errp, "With SVE enabled, at least one vector "
-                              "length must be enabled.\n");
-            return;
-        }
-        for (vq = 2; vq <= ARM_MAX_VQ; vq <<= 1) {
-            if (test_bit(vq - 1, cpu->sve_vq_init)) {
-                break;
+        if (kvm_enabled()) {
+            /* Disabling a supported length disables all larger lengths. */
+            for (vq = 1; vq <= ARM_MAX_VQ; ++vq) {
+                if (test_bit(vq - 1, cpu->sve_vq_init) &&
+                    test_bit(vq - 1, kvm_supported)) {
+                    break;
+                }
+            }
+            max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ;
+            bitmap_andnot(cpu->sve_vq_map, kvm_supported,
+                          cpu->sve_vq_init, max_vq);
+            if (max_vq == 0 || bitmap_empty(cpu->sve_vq_map, max_vq)) {
+                error_setg(errp, "cannot disable sve%d", vq * 128);
+                error_append_hint(errp, "Disabling sve%d results in all "
+                                  "vector lengths being disabled.\n",
+                                  vq * 128);
+                error_append_hint(errp, "With SVE enabled, at least one "
+                                  "vector length must be enabled.\n");
+                return;
+            }
+        } else {
+            /* Disabling a power-of-two disables all larger lengths. */
+            if (test_bit(0, cpu->sve_vq_init)) {
+                error_setg(errp, "cannot disable sve128");
+                error_append_hint(errp, "Disabling sve128 results in all "
+                                  "vector lengths being disabled.\n");
+                error_append_hint(errp, "With SVE enabled, at least one "
+                                  "vector length must be enabled.\n");
+                return;
+            }
+            for (vq = 2; vq <= ARM_MAX_VQ; vq <<= 1) {
+                if (test_bit(vq - 1, cpu->sve_vq_init)) {
+                    break;
+                }
             }
+            max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ;
+            bitmap_complement(cpu->sve_vq_map, cpu->sve_vq_init, max_vq);
         }
-        max_vq = vq <= ARM_MAX_VQ ? vq - 1 : ARM_MAX_VQ;
 
-        bitmap_complement(cpu->sve_vq_map, cpu->sve_vq_init, max_vq);
         max_vq = find_last_bit(cpu->sve_vq_map, max_vq) + 1;
     }
 
@@ -358,16 +398,48 @@ void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp)
     assert(max_vq != 0);
     bitmap_clear(cpu->sve_vq_map, max_vq, ARM_MAX_VQ - max_vq);
 
-    /* Ensure all required powers-of-two are enabled. */
-    for (vq = pow2floor(max_vq); vq >= 1; vq >>= 1) {
-        if (!test_bit(vq - 1, cpu->sve_vq_map)) {
-            error_setg(errp, "cannot disable sve%d", vq * 128);
-            error_append_hint(errp, "sve%d is required as it "
-                              "is a power-of-two length smaller than "
-                              "the maximum, sve%d\n",
-                              vq * 128, max_vq * 128);
+    if (kvm_enabled()) {
+        /* Ensure the set of lengths matches what KVM supports. */
+        bitmap_xor(tmp, cpu->sve_vq_map, kvm_supported, max_vq);
+        if (!bitmap_empty(tmp, max_vq)) {
+            vq = find_last_bit(tmp, max_vq) + 1;
+            if (test_bit(vq - 1, cpu->sve_vq_map)) {
+                if (cpu->sve_max_vq) {
+                    error_setg(errp, "cannot set sve-max-vq=%d",
+                               cpu->sve_max_vq);
+                    error_append_hint(errp, "This KVM host does not support "
+                                      "the vector length %d-bits.\n",
+                                      vq * 128);
+                    error_append_hint(errp, "It may not be possible to use "
+                                      "sve-max-vq with this KVM host. Try "
+                                      "using only sve<N> properties.\n");
+                } else {
+                    error_setg(errp, "cannot enable sve%d", vq * 128);
+                    error_append_hint(errp, "This KVM host does not support "
+                                      "the vector length %d-bits.\n",
+                                      vq * 128);
+                }
+            } else {
+                error_setg(errp, "cannot disable sve%d", vq * 128);
+                error_append_hint(errp, "The KVM host requires all "
+                                  "supported vector lengths smaller "
+                                  "than %d bits to also be enabled.\n",
+                                  max_vq * 128);
+            }
             return;
         }
+    } else {
+        /* Ensure all required powers-of-two are enabled. */
+        for (vq = pow2floor(max_vq); vq >= 1; vq >>= 1) {
+            if (!test_bit(vq - 1, cpu->sve_vq_map)) {
+                error_setg(errp, "cannot disable sve%d", vq * 128);
+                error_append_hint(errp, "sve%d is required as it "
+                                  "is a power-of-two length smaller than "
+                                  "the maximum, sve%d\n",
+                                  vq * 128, max_vq * 128);
+                return;
+            }
+        }
     }
 
     /*
@@ -421,15 +493,28 @@ static void cpu_max_set_sve_max_vq(Object *obj, Visitor *v, const char *name,
 {
     ARMCPU *cpu = ARM_CPU(obj);
     Error *err = NULL;
+    uint32_t max_vq;
+
+    visit_type_uint32(v, name, &max_vq, &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
 
-    visit_type_uint32(v, name, &cpu->sve_max_vq, &err);
+    if (kvm_enabled() && !kvm_arm_sve_supported(CPU(cpu))) {
+        error_setg(errp, "cannot set sve-max-vq");
+        error_append_hint(errp, "SVE not supported by KVM on this host\n");
+        return;
+    }
 
-    if (!err && (cpu->sve_max_vq == 0 || cpu->sve_max_vq > ARM_MAX_VQ)) {
-        error_setg(&err, "unsupported SVE vector length");
-        error_append_hint(&err, "Valid sve-max-vq in range [1-%d]\n",
+    if (max_vq == 0 || max_vq > ARM_MAX_VQ) {
+        error_setg(errp, "unsupported SVE vector length");
+        error_append_hint(errp, "Valid sve-max-vq in range [1-%d]\n",
                           ARM_MAX_VQ);
+        return;
     }
-    error_propagate(errp, err);
+
+    cpu->sve_max_vq = max_vq;
 }
 
 static void cpu_arm_get_sve_vq(Object *obj, Visitor *v, const char *name,
@@ -462,6 +547,12 @@ static void cpu_arm_set_sve_vq(Object *obj, Visitor *v, const char *name,
         return;
     }
 
+    if (value && kvm_enabled() && !kvm_arm_sve_supported(CPU(cpu))) {
+        error_setg(errp, "cannot enable %s", name);
+        error_append_hint(errp, "SVE not supported by KVM on this host\n");
+        return;
+    }
+
     if (value) {
         set_bit(vq - 1, cpu->sve_vq_map);
     } else {
@@ -619,20 +710,19 @@ static void aarch64_max_initfn(Object *obj)
         cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */
         cpu->dcz_blocksize = 7; /*  512 bytes */
 #endif
-
-        object_property_add(obj, "sve-max-vq", "uint32", cpu_max_get_sve_max_vq,
-                            cpu_max_set_sve_max_vq, NULL, NULL, &error_fatal);
-
-        for (vq = 1; vq <= ARM_MAX_VQ; ++vq) {
-            char name[8];
-            sprintf(name, "sve%d", vq * 128);
-            object_property_add(obj, name, "bool", cpu_arm_get_sve_vq,
-                                cpu_arm_set_sve_vq, NULL, NULL, &error_fatal);
-        }
     }
 
     object_property_add(obj, "sve", "bool", cpu_arm_get_sve,
                         cpu_arm_set_sve, NULL, NULL, &error_fatal);
+    object_property_add(obj, "sve-max-vq", "uint32", cpu_max_get_sve_max_vq,
+                        cpu_max_set_sve_max_vq, NULL, NULL, &error_fatal);
+
+    for (vq = 1; vq <= ARM_MAX_VQ; ++vq) {
+        char name[8];
+        sprintf(name, "sve%d", vq * 128);
+        object_property_add(obj, name, "bool", cpu_arm_get_sve_vq,
+                            cpu_arm_set_sve_vq, NULL, NULL, &error_fatal);
+    }
 }
 
 struct ARMCPUInfo {