diff options
author | Peter Maydell <peter.maydell@linaro.org> | 2020-02-13 17:56:23 +0000 |
---|---|---|
committer | Markus Armbruster <armbru@redhat.com> | 2020-02-15 11:41:49 +0100 |
commit | a7b6e8964142264f4791fd03f6e5a4756a3fc4af (patch) | |
tree | 3b699b2227566b4c4404c83d482c1ee4565ffbe0 /qga | |
parent | 883aff68a7d6797a06bac94f631db3439b11a60e (diff) |
qga/qapi-schema.json: minor format fixups for rST
We would like to switch the doc comments to rST format, and rST
requires a blank line before the start of a bulleted or enumerated
list. Two places in qapi-schema.json were missing this blank line.
Some places were using an indented line as a sort of single-item
bulleted list, which in the Texinfo output comes out all run
onto a single line; use a real bulleted list instead.
Some places unnecessarily indented lists, which confuses rST.
guest-fstrim:minimum's documentation was indented the
right amount to share a line with @minimum, but wasn't
actually doing so.
The indent on the bulleted list in the guest-set-vcpus
Returns section meant rST misindented it.
Changes to the generated Texinfo are very minor (the new
bulleted lists, and a few extra blank lines).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-7-peter.maydell@linaro.org>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Diffstat (limited to 'qga')
-rw-r--r-- | qga/qapi-schema.json | 94 |
1 files changed, 51 insertions, 43 deletions
diff --git a/qga/qapi-schema.json b/qga/qapi-schema.json index 7661b2b3b4..f6fcb59f34 100644 --- a/qga/qapi-schema.json +++ b/qga/qapi-schema.json @@ -510,8 +510,7 @@ # # Discard (or "trim") blocks which are not in use by the filesystem. # -# @minimum: -# Minimum contiguous free range to discard, in bytes. Free ranges +# @minimum: Minimum contiguous free range to discard, in bytes. Free ranges # smaller than this may be ignored (this is a hint and the guest # may not respect it). By increasing this value, the fstrim # operation will complete more quickly for filesystems with badly @@ -546,7 +545,8 @@ # (or set its status to "shutdown") due to other reasons. # # The following errors may be returned: -# If suspend to disk is not supported, Unsupported +# +# - If suspend to disk is not supported, Unsupported # # Notes: It's strongly recommended to issue the guest-sync command before # sending commands when the guest resumes @@ -575,12 +575,14 @@ # # This command does NOT return a response on success. There are two options # to check for success: -# 1. Wait for the SUSPEND QMP event from QEMU -# 2. Issue the query-status QMP command to confirm the VM status is -# "suspended" +# +# 1. Wait for the SUSPEND QMP event from QEMU +# 2. Issue the query-status QMP command to confirm the VM status is +# "suspended" # # The following errors may be returned: -# If suspend to ram is not supported, Unsupported +# +# - If suspend to ram is not supported, Unsupported # # Notes: It's strongly recommended to issue the guest-sync command before # sending commands when the guest resumes @@ -607,12 +609,14 @@ # # This command does NOT return a response on success. There are two options # to check for success: -# 1. Wait for the SUSPEND QMP event from QEMU -# 2. Issue the query-status QMP command to confirm the VM status is -# "suspended" +# +# 1. Wait for the SUSPEND QMP event from QEMU +# 2. Issue the query-status QMP command to confirm the VM status is +# "suspended" # # The following errors may be returned: -# If hybrid suspend is not supported, Unsupported +# +# - If hybrid suspend is not supported, Unsupported # # Notes: It's strongly recommended to issue the guest-sync command before # sending commands when the guest resumes @@ -767,18 +771,22 @@ # Returns: The length of the initial sublist that has been successfully # processed. The guest agent maximizes this value. Possible cases: # -# - 0: if the @vcpus list was empty on input. Guest state -# has not been changed. Otherwise, -# - Error: processing the first node of @vcpus failed for the -# reason returned. Guest state has not been changed. -# Otherwise, -# - < length(@vcpus): more than zero initial nodes have been processed, -# but not the entire @vcpus list. Guest state has -# changed accordingly. To retrieve the error -# (assuming it persists), repeat the call with the -# successfully processed initial sublist removed. -# Otherwise, -# - length(@vcpus): call successful. +# - 0: +# if the @vcpus list was empty on input. Guest state +# has not been changed. Otherwise, +# - Error: +# processing the first node of @vcpus failed for the +# reason returned. Guest state has not been changed. +# Otherwise, +# - < length(@vcpus): +# more than zero initial nodes have been processed, +# but not the entire @vcpus list. Guest state has +# changed accordingly. To retrieve the error +# (assuming it persists), repeat the call with the +# successfully processed initial sublist removed. +# Otherwise, +# - length(@vcpus): +# call successful. # # Since: 1.5 ## @@ -1182,35 +1190,35 @@ # @GuestOSInfo: # # @kernel-release: -# * POSIX: release field returned by uname(2) -# * Windows: build number of the OS +# * POSIX: release field returned by uname(2) +# * Windows: build number of the OS # @kernel-version: -# * POSIX: version field returned by uname(2) -# * Windows: version number of the OS +# * POSIX: version field returned by uname(2) +# * Windows: version number of the OS # @machine: -# * POSIX: machine field returned by uname(2) -# * Windows: one of x86, x86_64, arm, ia64 +# * POSIX: machine field returned by uname(2) +# * Windows: one of x86, x86_64, arm, ia64 # @id: -# * POSIX: as defined by os-release(5) -# * Windows: contains string "mswindows" +# * POSIX: as defined by os-release(5) +# * Windows: contains string "mswindows" # @name: -# * POSIX: as defined by os-release(5) -# * Windows: contains string "Microsoft Windows" +# * POSIX: as defined by os-release(5) +# * Windows: contains string "Microsoft Windows" # @pretty-name: -# * POSIX: as defined by os-release(5) -# * Windows: product name, e.g. "Microsoft Windows 10 Enterprise" +# * POSIX: as defined by os-release(5) +# * Windows: product name, e.g. "Microsoft Windows 10 Enterprise" # @version: -# * POSIX: as defined by os-release(5) -# * Windows: long version string, e.g. "Microsoft Windows Server 2008" +# * POSIX: as defined by os-release(5) +# * Windows: long version string, e.g. "Microsoft Windows Server 2008" # @version-id: -# * POSIX: as defined by os-release(5) -# * Windows: short version identifier, e.g. "7" or "20012r2" +# * POSIX: as defined by os-release(5) +# * Windows: short version identifier, e.g. "7" or "20012r2" # @variant: -# * POSIX: as defined by os-release(5) -# * Windows: contains string "server" or "client" +# * POSIX: as defined by os-release(5) +# * Windows: contains string "server" or "client" # @variant-id: -# * POSIX: as defined by os-release(5) -# * Windows: contains string "server" or "client" +# * POSIX: as defined by os-release(5) +# * Windows: contains string "server" or "client" # # Notes: # |