qemu-doc: Move appendix "Deprecated features" to its own file

Consumers of QEMU need to track feature deprecation.  Keeping
deprecation documentation in its own file helps in two small ways:

* You can track changes the easy and obvious way, with git-log.
  Before, you had to resort to more complex gittery like "git-log
  --oneline -L '/@node Deprecated features/,/@node Supported build
  platforms/:qemu-doc.texi'"

* It lets us use MAINTAINERS to copy interested parties on deprecation
  patches, so they can advise or object before they're a done deal.
  The next commit will do that for libvirt.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180716073226.21127-2-armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>

1 files changed, 1 insertions, 234 deletions

diff --git a/qemu-doc.texi b/qemu-doc.texi
index 1047c407e7..abfd2db546 100644
--- a/qemu-doc.texi
+++ b/qemu-doc.texi
@@ -2791,240 +2791,7 @@ Run the emulation in single step mode.
 
 @include qemu-tech.texi
 
-@node Deprecated features
-@appendix Deprecated features
-
-In general features are intended to be supported indefinitely once
-introduced into QEMU. In the event that a feature needs to be removed,
-it will be listed in this appendix. The feature will remain functional
-for 2 releases prior to actual removal. Deprecated features may also
-generate warnings on the console when QEMU starts up, or if activated
-via a monitor command, however, this is not a mandatory requirement.
-
-Prior to the 2.10.0 release there was no official policy on how
-long features would be deprecated prior to their removal, nor
-any documented list of which features were deprecated. Thus
-any features deprecated prior to 2.10.0 will be treated as if
-they were first deprecated in the 2.10.0 release.
-
-What follows is a list of all features currently marked as
-deprecated.
-
-@section Build options
-
-@subsection GTK 2.x
-
-Previously QEMU has supported building against both GTK 2.x
-and 3.x series APIs. Support for the GTK 2.x builds will be
-discontinued, so maintainers should switch to using GTK 3.x,
-which is the default.
-
-@subsection SDL 1.2
-
-Previously QEMU has supported building against both SDL 1.2
-and 2.0 series APIs. Support for the SDL 1.2 builds will be
-discontinued, so maintainers should switch to using SDL 2.0,
-which is the default.
-
-@section System emulator command line arguments
-
-@subsection -no-kvm (since 1.3.0)
-
-The ``-no-kvm'' argument is now a synonym for setting
-``-machine accel=tcg''.
-
-@subsection -vnc tls (since 2.5.0)
-
-The ``-vnc tls'' argument is now a synonym for setting
-``-object tls-creds-anon,id=tls0'' combined with
-``-vnc tls-creds=tls0'
-
-@subsection -vnc x509 (since 2.5.0)
-
-The ``-vnc x509=/path/to/certs'' argument is now a
-synonym for setting
-``-object tls-creds-x509,dir=/path/to/certs,id=tls0,verify-peer=no''
-combined with ``-vnc tls-creds=tls0'
-
-@subsection -vnc x509verify (since 2.5.0)
-
-The ``-vnc x509verify=/path/to/certs'' argument is now a
-synonym for setting
-``-object tls-creds-x509,dir=/path/to/certs,id=tls0,verify-peer=yes''
-combined with ``-vnc tls-creds=tls0'
-
-@subsection -tftp (since 2.6.0)
-
-The ``-tftp /some/dir'' argument is replaced by either
-``-netdev user,id=x,tftp=/some/dir '' (for pluggable NICs, accompanied
-with ``-device ...,netdev=x''), or ``-nic user,tftp=/some/dir''
-(for embedded NICs). The new syntax allows different settings to be
-provided per NIC.
-
-@subsection -bootp (since 2.6.0)
-
-The ``-bootp /some/file'' argument is replaced by either
-``-netdev user,id=x,bootp=/some/file '' (for pluggable NICs, accompanied
-with ``-device ...,netdev=x''), or ``-nic user,bootp=/some/file''
-(for embedded NICs). The new syntax allows different settings to be
-provided per NIC.
-
-@subsection -redir (since 2.6.0)
-
-The ``-redir [tcp|udp]:hostport:[guestaddr]:guestport'' argument is
-replaced by either
-``-netdev user,id=x,hostfwd=[tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport''
-(for pluggable NICs, accompanied with ``-device ...,netdev=x'') or
-``-nic user,hostfwd=[tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport''
-(for embedded NICs). The new syntax allows different settings to be
-provided per NIC.
-
-@subsection -smb (since 2.6.0)
-
-The ``-smb /some/dir'' argument is replaced by either
-``-netdev user,id=x,smb=/some/dir '' (for pluggable NICs, accompanied
-with ``-device ...,netdev=x''), or ``-nic user,smb=/some/dir''
-(for embedded NICs). The new syntax allows different settings to be
-provided per NIC.
-
-@subsection -drive cyls=...,heads=...,secs=...,trans=... (since 2.10.0)
-
-The drive geometry arguments are replaced by the the geometry arguments
-that can be specified with the ``-device'' parameter.
-
-@subsection -drive serial=... (since 2.10.0)
-
-The drive serial argument is replaced by the the serial argument
-that can be specified with the ``-device'' parameter.
-
-@subsection -drive addr=... (since 2.10.0)
-
-The drive addr argument is replaced by the the addr argument
-that can be specified with the ``-device'' parameter.
-
-@subsection -usbdevice (since 2.10.0)
-
-The ``-usbdevice DEV'' argument is now a synonym for setting
-the ``-device usb-DEV'' argument instead. The deprecated syntax
-would automatically enable USB support on the machine type.
-If using the new syntax, USB support must be explicitly
-enabled via the ``-machine usb=on'' argument.
-
-@subsection -nodefconfig (since 2.11.0)
-
-The ``-nodefconfig`` argument is a synonym for ``-no-user-config``.
-
-@subsection -balloon (since 2.12.0)
-
-The @option{--balloon virtio} argument has been superseded by
-@option{--device virtio-balloon}.
-
-@subsection -machine s390-squash-mcss=on|off (since 2.12.0)
-
-The ``s390-squash-mcss=on`` property has been obsoleted by allowing the
-cssid to be chosen freely. Instead of squashing subchannels into the
-default channel subsystem image for guests that do not support multiple
-channel subsystems, all devices can be put into the default channel
-subsystem image.
-
-@subsection -fsdev handle (since 2.12.0)
-
-The ``handle'' fsdev backend does not support symlinks and causes the 9p
-filesystem in the guest to fail a fair amount of tests from the PJD POSIX
-filesystem test suite. Also it requires the CAP_DAC_READ_SEARCH capability,
-which is not the recommended way to run QEMU. This backend should not be
-used and it will be removed with no replacement.
-
-@subsection -no-frame (since 2.12.0)
-
-The @code{--no-frame} argument works with SDL 1.2 only. The other user
-interfaces never implemented this in the first place. So this will be
-removed together with SDL 1.2 support.
-
-@subsection -rtc-td-hack (since 2.12.0)
-
-The @code{-rtc-td-hack} option has been replaced by
-@code{-rtc driftfix=slew}.
-
-@subsection -localtime (since 2.12.0)
-
-The @code{-localtime} option has been replaced by @code{-rtc base=localtime}.
-
-@subsection -startdate (since 2.12.0)
-
-The @code{-startdate} option has been replaced by @code{-rtc base=@var{date}}.
-
-@subsection -virtioconsole (since 3.0.0)
-
-Option @option{-virtioconsole} has been replaced by
-@option{-device virtconsole}.
-
-@subsection -clock (since 3.0.0)
-
-The @code{-clock} option is ignored since QEMU version 1.7.0. There is no
-replacement since it is not needed anymore.
-
-@subsection -enable-hax (since 3.0.0)
-
-The @option{-enable-hax} option has been replaced by @option{-accel hax}.
-Both options have been introduced in QEMU version 2.9.0.
-
-@subsection -drive file=json:@{...@{'driver':'file'@}@} (since 3.0)
-
-The 'file' driver for drives is no longer appropriate for character or host
-devices and will only accept regular files (S_IFREG). The correct driver
-for these file types is 'host_cdrom' or 'host_device' as appropriate.
-
-@section QEMU Machine Protocol (QMP) commands
-
-@subsection block-dirty-bitmap-add "autoload" parameter (since 2.12.0)
-
-"autoload" parameter is now ignored. All bitmaps are automatically loaded
-from qcow2 images.
-
-@subsection query-cpus (since 2.12.0)
-
-The ``query-cpus'' command is replaced by the ``query-cpus-fast'' command.
-
-@subsection query-cpus-fast "arch" output member (since 3.0.0)
-
-The ``arch'' output member of the ``query-cpus-fast'' command is
-replaced by the ``target'' output member.
-
-@section System emulator devices
-
-@subsection ivshmem (since 2.6.0)
-
-The ``ivshmem'' device type is replaced by either the ``ivshmem-plain''
-or ``ivshmem-doorbell`` device types.
-
-@subsection Page size support < 4k for embedded PowerPC CPUs (since 2.12.0)
-
-qemu-system-ppcemb will be removed. qemu-system-ppc (or qemu-system-ppc64)
-should be used instead. That means that embedded 4xx PowerPC CPUs will not
-support page sizes < 4096 any longer.
-
-@section System emulator machines
-
-@subsection pc-0.10 and pc-0.11 (since 3.0)
-
-These machine types are very old and likely can not be used for live migration
-from old QEMU versions anymore. A newer machine type should be used instead.
-
-@section Device options
-
-@subsection Block device options
-
-@subsubsection "backing": "" (since 2.12.0)
-
-In order to prevent QEMU from automatically opening an image's backing
-chain, use ``"backing": null'' instead.
-
-@subsection vio-spapr-device device options
-
-@subsubsection "irq": "" (since 3.0.0)
-
-The ``irq'' property is obsoleted.
+@include qemu-deprecated.texi
 
 @node Supported build platforms
 @appendix Supported build platforms