softmmu: move remaining include files to include/ subdirectories

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 254 deletions

diff --git a/qemu-char.h b/qemu-char.h
deleted file mode 100644
index baa5d035fd..0000000000
--- a/qemu-char.h
+++ /dev/null
@@ -1,254 +0,0 @@
-#ifndef QEMU_CHAR_H
-#define QEMU_CHAR_H
-
-#include "qemu-common.h"
-#include "qemu/queue.h"
-#include "qemu/option.h"
-#include "qemu/config-file.h"
-#include "block/aio.h"
-#include "qapi/qmp/qobject.h"
-#include "qapi/qmp/qstring.h"
-#include "qemu/main-loop.h"
-
-/* character device */
-
-#define CHR_EVENT_BREAK   0 /* serial break char */
-#define CHR_EVENT_FOCUS   1 /* focus to this terminal (modal input needed) */
-#define CHR_EVENT_OPENED  2 /* new connection established */
-#define CHR_EVENT_MUX_IN  3 /* mux-focus was set to this terminal */
-#define CHR_EVENT_MUX_OUT 4 /* mux-focus will move on */
-#define CHR_EVENT_CLOSED  5 /* connection closed */
-
-
-#define CHR_IOCTL_SERIAL_SET_PARAMS   1
-typedef struct {
-    int speed;
-    int parity;
-    int data_bits;
-    int stop_bits;
-} QEMUSerialSetParams;
-
-#define CHR_IOCTL_SERIAL_SET_BREAK    2
-
-#define CHR_IOCTL_PP_READ_DATA        3
-#define CHR_IOCTL_PP_WRITE_DATA       4
-#define CHR_IOCTL_PP_READ_CONTROL     5
-#define CHR_IOCTL_PP_WRITE_CONTROL    6
-#define CHR_IOCTL_PP_READ_STATUS      7
-#define CHR_IOCTL_PP_EPP_READ_ADDR    8
-#define CHR_IOCTL_PP_EPP_READ         9
-#define CHR_IOCTL_PP_EPP_WRITE_ADDR  10
-#define CHR_IOCTL_PP_EPP_WRITE       11
-#define CHR_IOCTL_PP_DATA_DIR        12
-
-#define CHR_IOCTL_SERIAL_SET_TIOCM   13
-#define CHR_IOCTL_SERIAL_GET_TIOCM   14
-
-#define CHR_TIOCM_CTS	0x020
-#define CHR_TIOCM_CAR	0x040
-#define CHR_TIOCM_DSR	0x100
-#define CHR_TIOCM_RI	0x080
-#define CHR_TIOCM_DTR	0x002
-#define CHR_TIOCM_RTS	0x004
-
-typedef void IOEventHandler(void *opaque, int event);
-
-struct CharDriverState {
-    void (*init)(struct CharDriverState *s);
-    int (*chr_write)(struct CharDriverState *s, const uint8_t *buf, int len);
-    void (*chr_update_read_handler)(struct CharDriverState *s);
-    int (*chr_ioctl)(struct CharDriverState *s, int cmd, void *arg);
-    int (*get_msgfd)(struct CharDriverState *s);
-    int (*chr_add_client)(struct CharDriverState *chr, int fd);
-    IOEventHandler *chr_event;
-    IOCanReadHandler *chr_can_read;
-    IOReadHandler *chr_read;
-    void *handler_opaque;
-    void (*chr_close)(struct CharDriverState *chr);
-    void (*chr_accept_input)(struct CharDriverState *chr);
-    void (*chr_set_echo)(struct CharDriverState *chr, bool echo);
-    void (*chr_guest_open)(struct CharDriverState *chr);
-    void (*chr_guest_close)(struct CharDriverState *chr);
-    void *opaque;
-    QEMUTimer *open_timer;
-    char *label;
-    char *filename;
-    int opened;
-    int avail_connections;
-    QTAILQ_ENTRY(CharDriverState) next;
-};
-
-/**
- * @qemu_chr_new_from_opts:
- *
- * Create a new character backend from a QemuOpts list.
- *
- * @opts see qemu-config.c for a list of valid options
- * @init not sure..
- *
- * Returns: a new character backend
- */
-CharDriverState *qemu_chr_new_from_opts(QemuOpts *opts,
-                                    void (*init)(struct CharDriverState *s));
-
-/**
- * @qemu_chr_new:
- *
- * Create a new character backend from a URI.
- *
- * @label the name of the backend
- * @filename the URI
- * @init not sure..
- *
- * Returns: a new character backend
- */
-CharDriverState *qemu_chr_new(const char *label, const char *filename,
-                              void (*init)(struct CharDriverState *s));
-
-/**
- * @qemu_chr_delete:
- *
- * Destroy a character backend.
- */
-void qemu_chr_delete(CharDriverState *chr);
-
-/**
- * @qemu_chr_fe_set_echo:
- *
- * Ask the backend to override its normal echo setting.  This only really
- * applies to the stdio backend and is used by the QMP server such that you
- * can see what you type if you try to type QMP commands.
- *
- * @echo true to enable echo, false to disable echo
- */
-void qemu_chr_fe_set_echo(struct CharDriverState *chr, bool echo);
-
-/**
- * @qemu_chr_fe_open:
- *
- * Open a character backend.  This function call is an indication that the
- * front end is ready to begin doing I/O.
- */
-void qemu_chr_fe_open(struct CharDriverState *chr);
-
-/**
- * @qemu_chr_fe_close:
- *
- * Close a character backend.  This function call indicates that the front end
- * no longer is able to process I/O.  To process I/O again, the front end will
- * call @qemu_chr_fe_open.
- */
-void qemu_chr_fe_close(struct CharDriverState *chr);
-
-/**
- * @qemu_chr_fe_printf:
- *
- * Write to a character backend using a printf style interface.
- *
- * @fmt see #printf
- */
-void qemu_chr_fe_printf(CharDriverState *s, const char *fmt, ...)
-    GCC_FMT_ATTR(2, 3);
-
-/**
- * @qemu_chr_fe_write:
- *
- * Write data to a character backend from the front end.  This function will
- * send data from the front end to the back end.
- *
- * @buf the data
- * @len the number of bytes to send
- *
- * Returns: the number of bytes consumed
- */
-int qemu_chr_fe_write(CharDriverState *s, const uint8_t *buf, int len);
-
-/**
- * @qemu_chr_fe_ioctl:
- *
- * Issue a device specific ioctl to a backend.
- *
- * @cmd see CHR_IOCTL_*
- * @arg the data associated with @cmd
- *
- * Returns: if @cmd is not supported by the backend, -ENOTSUP, otherwise the
- *          return value depends on the semantics of @cmd
- */
-int qemu_chr_fe_ioctl(CharDriverState *s, int cmd, void *arg);
-
-/**
- * @qemu_chr_fe_get_msgfd:
- *
- * For backends capable of fd passing, return the latest file descriptor passed
- * by a client.
- *
- * Returns: -1 if fd passing isn't supported or there is no pending file
- *          descriptor.  If a file descriptor is returned, subsequent calls to
- *          this function will return -1 until a client sends a new file
- *          descriptor.
- */
-int qemu_chr_fe_get_msgfd(CharDriverState *s);
-
-/**
- * @qemu_chr_be_can_write:
- *
- * Determine how much data the front end can currently accept.  This function
- * returns the number of bytes the front end can accept.  If it returns 0, the
- * front end cannot receive data at the moment.  The function must be polled
- * to determine when data can be received.
- *
- * Returns: the number of bytes the front end can receive via @qemu_chr_be_write
- */
-int qemu_chr_be_can_write(CharDriverState *s);
-
-/**
- * @qemu_chr_be_write:
- *
- * Write data from the back end to the front end.  Before issuing this call,
- * the caller should call @qemu_chr_be_can_write to determine how much data
- * the front end can currently accept.
- *
- * @buf a buffer to receive data from the front end
- * @len the number of bytes to receive from the front end
- */
-void qemu_chr_be_write(CharDriverState *s, uint8_t *buf, int len);
-
-
-/**
- * @qemu_chr_be_event:
- *
- * Send an event from the back end to the front end.
- *
- * @event the event to send
- */
-void qemu_chr_be_event(CharDriverState *s, int event);
-
-void qemu_chr_add_handlers(CharDriverState *s,
-                           IOCanReadHandler *fd_can_read,
-                           IOReadHandler *fd_read,
-                           IOEventHandler *fd_event,
-                           void *opaque);
-
-void qemu_chr_generic_open(CharDriverState *s);
-void qemu_chr_accept_input(CharDriverState *s);
-int qemu_chr_add_client(CharDriverState *s, int fd);
-void qemu_chr_info_print(Monitor *mon, const QObject *ret_data);
-void qemu_chr_info(Monitor *mon, QObject **ret_data);
-CharDriverState *qemu_chr_find(const char *name);
-
-QemuOpts *qemu_chr_parse_compat(const char *label, const char *filename);
-
-/* add an eventfd to the qemu devices that are polled */
-CharDriverState *qemu_chr_open_eventfd(int eventfd);
-
-extern int term_escape_char;
-
-/* memory chardev */
-void qemu_chr_init_mem(CharDriverState *chr);
-void qemu_chr_close_mem(CharDriverState *chr);
-QString *qemu_chr_mem_to_qs(CharDriverState *chr);
-size_t qemu_chr_mem_osize(const CharDriverState *chr);
-
-CharDriverState *qemu_char_get_next_serial(void);
-
-#endif