qapi: Extract qapi/block.json definitions

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

1 files changed, 0 insertions, 159 deletions

diff --git a/qapi-schema.json b/qapi-schema.json
index c888d23c9a..14b498b442 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -32,40 +32,6 @@
 { 'enum': 'LostTickPolicy',
   'data': ['discard', 'delay', 'merge', 'slew' ] }
 
-##
-# BiosAtaTranslation:
-#
-# Policy that BIOS should use to interpret cylinder/head/sector
-# addresses.  Note that Bochs BIOS and SeaBIOS will not actually
-# translate logical CHS to physical; instead, they will use logical
-# block addressing.
-#
-# @auto: If cylinder/heads/sizes are passed, choose between none and LBA
-#        depending on the size of the disk.  If they are not passed,
-#        choose none if QEMU can guess that the disk had 16 or fewer
-#        heads, large if QEMU can guess that the disk had 131072 or
-#        fewer tracks across all heads (i.e. cylinders*heads<131072),
-#        otherwise LBA.
-#
-# @none: The physical disk geometry is equal to the logical geometry.
-#
-# @lba: Assume 63 sectors per track and one of 16, 32, 64, 128 or 255
-#       heads (if fewer than 255 are enough to cover the whole disk
-#       with 1024 cylinders/head).  The number of cylinders/head is
-#       then computed based on the number of sectors and heads.
-#
-# @large: The number of cylinders per head is scaled down to 1024
-#         by correspondingly scaling up the number of heads.
-#
-# @rechs: Same as @large, but first convert a 16-head geometry to
-#         15-head, by proportionally scaling up the number of
-#         cylinders/head.
-#
-# Since: 2.0
-##
-{ 'enum': 'BiosAtaTranslation',
-  'data': ['auto', 'none', 'lba', 'large', 'rechs']}
-
 # @add_client
 #
 # Allow client connections for VNC, Spice and socket based
@@ -1201,22 +1167,6 @@
 { 'command': 'balloon', 'data': {'value': 'int'} }
 
 ##
-# @BlockdevSnapshotInternal
-#
-# @device: the name of the device to generate the snapshot from
-#
-# @name: the name of the internal snapshot to be created
-#
-# Notes: In transaction, if @name is empty, or any snapshot matching @name
-#        exists, the operation will fail. Only some image formats support it,
-#        for example, qcow2, rbd, and sheepdog.
-#
-# Since: 1.7
-##
-{ 'type': 'BlockdevSnapshotInternal',
-  'data': { 'device': 'str', 'name': 'str' } }
-
-##
 # @Abort
 #
 # This action can be used to test transaction failure.
@@ -1263,53 +1213,6 @@
   'data': { 'actions': [ 'TransactionAction' ] } }
 
 ##
-# @blockdev-snapshot-internal-sync
-#
-# Synchronously take an internal snapshot of a block device, when the format
-# of the image used supports it.
-#
-# For the arguments, see the documentation of BlockdevSnapshotInternal.
-#
-# Returns: nothing on success
-#          If @device is not a valid block device, DeviceNotFound
-#          If any snapshot matching @name exists, or @name is empty,
-#          GenericError
-#          If the format of the image used does not support it,
-#          BlockFormatFeatureNotSupported
-#
-# Since 1.7
-##
-{ 'command': 'blockdev-snapshot-internal-sync',
-  'data': 'BlockdevSnapshotInternal' }
-
-##
-# @blockdev-snapshot-delete-internal-sync
-#
-# Synchronously delete an internal snapshot of a block device, when the format
-# of the image used support it. The snapshot is identified by name or id or
-# both. One of the name or id is required. Return SnapshotInfo for the
-# successfully deleted snapshot.
-#
-# @device: the name of the device to delete the snapshot from
-#
-# @id: optional the snapshot's ID to be deleted
-#
-# @name: optional the snapshot's name to be deleted
-#
-# Returns: SnapshotInfo on success
-#          If @device is not a valid block device, DeviceNotFound
-#          If snapshot not found, GenericError
-#          If the format of the image used does not support it,
-#          BlockFormatFeatureNotSupported
-#          If @id and @name are both not specified, GenericError
-#
-# Since 1.7
-##
-{ 'command': 'blockdev-snapshot-delete-internal-sync',
-  'data': { 'device': 'str', '*id': 'str', '*name': 'str'},
-  'returns': 'SnapshotInfo' }
-
-##
 # @human-monitor-command:
 #
 # Execute a command on the human monitor and return the output.
@@ -1553,25 +1456,6 @@
 { 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} }
 
 ##
-# @eject:
-#
-# Ejects a device from a removable drive.
-#
-# @device:  The name of the device
-#
-# @force:   @optional If true, eject regardless of whether the drive is locked.
-#           If not specified, the default value is false.
-#
-# Returns:  Nothing on success
-#           If @device is not a valid block device, DeviceNotFound
-#
-# Notes:    Ejecting a device will no media results in success
-#
-# Since: 0.14.0
-##
-{ 'command': 'eject', 'data': {'device': 'str', '*force': 'bool'} }
-
-##
 # @change-vnc-password:
 #
 # Change the VNC server password.
@@ -2579,49 +2463,6 @@
 { 'command': 'screendump', 'data': {'filename': 'str'} }
 
 ##
-# @nbd-server-start:
-#
-# Start an NBD server listening on the given host and port.  Block
-# devices can then be exported using @nbd-server-add.  The NBD
-# server will present them as named exports; for example, another
-# QEMU instance could refer to them as "nbd:HOST:PORT:exportname=NAME".
-#
-# @addr: Address on which to listen.
-#
-# Returns: error if the server is already running.
-#
-# Since: 1.3.0
-##
-{ 'command': 'nbd-server-start',
-  'data': { 'addr': 'SocketAddress' } }
-
-##
-# @nbd-server-add:
-#
-# Export a device to QEMU's embedded NBD server.
-#
-# @device: Block device to be exported
-#
-# @writable: Whether clients should be able to write to the device via the
-#     NBD connection (default false). #optional
-#
-# Returns: error if the device is already marked for export.
-#
-# Since: 1.3.0
-##
-{ 'command': 'nbd-server-add', 'data': {'device': 'str', '*writable': 'bool'} }
-
-##
-# @nbd-server-stop:
-#
-# Stop QEMU's embedded NBD server, and unregister all devices previously
-# added via @nbd-server-add.
-#
-# Since: 1.3.0
-##
-{ 'command': 'nbd-server-stop' }
-
-##
 # @ChardevFile:
 #
 # Configuration info for file chardevs.