seabios: update to 1.11 prerelease

This is the seabios update for qemu 2.11.  Well, almost, seabios is in
freeze for the upcoming 1.11 release.  This updates seabios to current
git master snapshot, and it will be updated again to 1.11 final before
the 2.11 release.

With this two-step seabios gets some more wide testing before the actual
release and the update to 1.11 final (which will most likely happen
after qemu freeze) should have bugfix patches only.

git shortlog
============

Aleksandr Bezzubikov (3):
      pci: refactor pci_find_capapibilty to get bdf as the first argument instead of the whole pci_device
      pci: add QEMU-specific PCI capability structure
      pci: enable RedHat PCI bridges to reserve additional resources on PCI init

Ben Warren (5):
      QEMU DMA: Add DMA write capability
      romfile-loader: Switch to using named structs
      QEMU fw_cfg: Add command to write back address of file
      QEMU fw_cfg: Add functions for accessing files by key
      QEMU fw_cfg: Write fw_cfg back on S3 resume

Daniel Verkamp (5):
      nvme: support NVMe 1.0 controllers
      nvme: extend command timeout to 5 seconds
      nvme: fix reversed loop condition in cmd_readwrite
      nvme: fix extraction of status code bits
      nvme: fix copy-paste mistake in comment

Filippo Sironi (1):
      nvme: Use the Maximum Queue Entries Supported (MQES) to initialize I/O queues

Gerd Hoffmann (7):
      usb: add hub portmap
      usb-xhci: use hub portmap
      std: add cp437 to unicode map
      kbd: make enqueue_key public, add ascii_to_keycode
      romfile: add support for constant files.
      paravirt: serial console configuration.
      add serial console support

Igor Mammedov (1):
      drop "etc/boot-cpus" fw_cfg file and reuse legacy QEMU_CFG_NB_CPUS

Jason Wang (1):
      virtio: IOMMU support

Julian Stecklina (2):
      block: add NVMe boot support
      nvme: fix out of memory behavior

Julius Werner (1):
      coreboot: Adapt to upstream CBMEM console changes

Kevin O'Connor (26):
      usb: Make usb_time_sigatt variable static
      tpm: Add comment banners to tcg.c separating major parts of spec
      tpm: Don't call tpm_set_failure() from tpm12_get_capability()
      tpm: Move code around in tcgbios.c to keep like code together
      acpi: Generalize find_fadt() and find_tcpa_by_rsdp() into find_acpi_table()
      tpm: Don't call tpm_build_and_send_cmd() from tpm20_stirrandom()
      tpm: Rework tpm_build_and_send_cmd() into tpm_simple_cmd()
      ps2port: Disable keyboard/mouse prior to resetting ps2 controller
      docs: Note release dates for 1.10.1 and 1.10.2
      resume: Don't attempt to use generic reboot mechanisms on QEMU
      boot: Increase description size in boot menu
      src: Minor - remove tab characters that slipped into SeaBIOS C code
      NVMe: Allow NVMe to be enabled on real hardware
      smm: Backup and restore A20 on an SMI based mode switch
      stacks: Make sure to initialize Call16Data
      stacks: Don't update the A20 settings if they haven't changed
      stacks: There is no need to disable NMI if it is already disabled
      vga: Fix bug in stdvga_get_linesize()
      docs: Fix typos in Memory_Model.md
      tcgbios: Fix use of unitialized variable
      boot: Rename drive_g to drive
      disk: Don't require the 'struct drive_s' to be in the f-segment
      block: Rename disk_op_s->drive_gf to drive_fl
      virtio: Allocate drive_s storage in low memory
      xhci: Build TRBs directly in xhci_trb_queue()
      xhci: Verify the device is still present in xhci_cmd_submit()

Ladi Prosek (1):
      ahci: Set upper 32-bit registers to zero

Patrick Rudolph (4):
      SeaVGABios/cbvga: Advertise correct pixel format
      SeaVGABIOS/vbe: Query driver for scanline pitch v2
      SeaVGABios/cbvga: Use active mode to clear screen
      SeaVGABios/cbvga: Advertise compatible VESA modes

Paul Menzel (1):
      vgasrc: Increase debug level

Petr Berky (1):
      config: Add function to check if fw_cfg exists

Ricardo Ribalda Delgado (1):
      serialio: Support for mmap serial ports

Roman Kagan (11):
      blockcmd: accept only disks and CD-ROMs
      blockcmd: generic SCSI luns enumeration
      virtio-scsi: enumerate luns with REPORT LUNS
      esp-scsi: enumerate luns with REPORT LUNS
      usb-uas: enumerate luns with REPORT LUNS
      pvscsi: fix the comment about lun enumeration
      mpt-scsi: try to enumerate luns with REPORT LUNS
      lsi-scsi: reset in case of a serious problem
      lsi-scsi: try to enumerate luns with REPORT LUNS
      blockcmd: start REPORT_LUNS with the smallest buffer
      Revert "lsi-scsi: reset in case of a serious problem"

Stefan Berger (1):
      tpm: Log TPM 2 digest structure in little endian format

Youness Alaoui (1):
      nvme: Enable NVMe support for non-qemu hardware

Zeh, Werner (1):
      ahci: Disable Native Command Queueing

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

1 files changed, 0 insertions, 0 deletions

diff --git a/pc-bios/vgabios-virtio.bin b/pc-bios/vgabios-virtio.bin
index 8b3abfa003..16c7c7d8d2 100644
--- a/pc-bios/vgabios-virtio.bin
+++ b/pc-bios/vgabios-virtio.bin