sending NUMA topology to BIOS (Andre Przywara)

uses the QEMU firmware configuration interfacce to send the NUMA
topology to the BIOS, which has to setup the tables. Only one firmware
configuration channel is used.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7212 c046a42c-6fe2-441c-8c8c-71466251a162

2 files changed, 306 insertions, 0 deletions

diff --git a/pc-bios/bios-pq/0014_add-srat-acpi-table-support.patch b/pc-bios/bios-pq/0014_add-srat-acpi-table-support.patch
new file mode 100644
index 0000000000..a5227df259
--- /dev/null
+++ b/pc-bios/bios-pq/0014_add-srat-acpi-table-support.patch
@@ -0,0 +1,305 @@
+add SRAT ACPI table support (Andre Przywara)
+
+Take NUMA topology info from the QEMU firmware configuration interface
+(number of nodes, node for each (V)CPU and amount of memory) and build
+a SRAT table describing this topology for the guest OS. Handles more than
+4 GB of RAM by including a hole for 32bit PCI memory mapping.
+
+Signed-off-by: Andre Przywara <andre.przywara@amd.com>
+Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
+
+diff --git a/bios/rombios32.c b/bios/rombios32.c
+index 49dfd62..d8f6d4e 100644
+--- a/bios/rombios32.c
++++ b/bios/rombios32.c
+@@ -450,6 +450,11 @@ int pm_sci_int;
+ unsigned long bios_table_cur_addr;
+ unsigned long bios_table_end_addr;
+
++static inline uint64_t le64_to_cpu(uint64_t x)
++{
++    return x;
++}
++
+ void wrmsr_smp(uint32_t index, uint64_t val)
+ {
+     static struct { uint32_t ecx, eax, edx; } *p = (void *)SMP_MSR_ADDR;
+@@ -468,6 +473,7 @@ void wrmsr_smp(uint32_t index, uint64_t val)
+ #define QEMU_CFG_SIGNATURE  0x00
+ #define QEMU_CFG_ID         0x01
+ #define QEMU_CFG_UUID       0x02
++#define QEMU_CFG_NUMA       0x0D
+ #define QEMU_CFG_ARCH_LOCAL     0x8000
+ #define QEMU_CFG_ACPI_TABLES  (QEMU_CFG_ARCH_LOCAL + 0)
+ #define QEMU_CFG_SMBIOS_ENTRIES  (QEMU_CFG_ARCH_LOCAL + 1)
+@@ -529,6 +535,14 @@ static uint16_t smbios_entries(void)
+
+     return cnt;
+ }
++
++uint64_t qemu_cfg_get64 (void)
++{
++    uint64_t ret;
++
++    qemu_cfg_read((uint8_t*)&ret, 8);
++    return le64_to_cpu(ret);
++}
+ #endif
+
+ void cpu_probe(void)
+@@ -1281,7 +1295,7 @@ struct rsdt_descriptor_rev1
+ {
+ 	ACPI_TABLE_HEADER_DEF                           /* ACPI common table header */
+ #ifdef BX_QEMU
+-	uint32_t                             table_offset_entry [4]; /* Array of pointers to other */
++	uint32_t                             table_offset_entry [5]; /* Array of pointers to other */
+ #else
+ 	uint32_t                             table_offset_entry [3]; /* Array of pointers to other */
+ #endif
+@@ -1389,7 +1403,7 @@ struct multiple_apic_table
+ } __attribute__((__packed__));
+
+
+-/* Values for Type in APIC_HEADER_DEF */
++/* Values for Type in APIC sub-headers */
+
+ #define APIC_PROCESSOR          0
+ #define APIC_IO                 1
+@@ -1402,18 +1416,18 @@ struct multiple_apic_table
+ #define APIC_XRUPT_SOURCE       8
+ #define APIC_RESERVED           9           /* 9 and greater are reserved */
+
+-/*
+- * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE)
+- */
+-#define APIC_HEADER_DEF                     /* Common APIC sub-structure header */\
++#define ACPI_SUB_HEADER_DEF                 /* Common ACPI sub-structure header */\
+ 	uint8_t                              type; \
+ 	uint8_t                              length;
+
++/*
++ * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE)
++ */
+ /* Sub-structures for MADT */
+
+ struct madt_processor_apic
+ {
+-	APIC_HEADER_DEF
++	ACPI_SUB_HEADER_DEF
+ 	uint8_t                              processor_id;           /* ACPI processor id */
+ 	uint8_t                              local_apic_id;          /* Processor's local APIC id */
+ #if 0
+@@ -1424,6 +1438,43 @@ struct madt_processor_apic
+ #endif
+ } __attribute__((__packed__));
+
++/*
++ * SRAT (NUMA topology description) table
++ */
++
++#define SRAT_PROCESSOR          0
++#define SRAT_MEMORY             1
++
++struct system_resource_affinity_table
++{
++    ACPI_TABLE_HEADER_DEF
++    uint32_t    reserved1;
++    uint32_t    reserved2[2];
++};
++
++struct srat_processor_affinity
++{
++    ACPI_SUB_HEADER_DEF
++    uint8_t     proximity_lo;
++    uint8_t     local_apic_id;
++    uint32_t    flags;
++    uint8_t     local_sapic_eid;
++    uint8_t     proximity_hi[3];
++    uint32_t    reserved;
++};
++
++struct srat_memory_affinity
++{
++    ACPI_SUB_HEADER_DEF
++    uint8_t     proximity[4];
++    uint16_t    reserved1;
++    uint32_t    base_addr_low,base_addr_high;
++    uint32_t    length_low,length_high;
++    uint32_t    reserved2;
++    uint32_t    flags;
++    uint32_t    reserved3[2];
++};
++
+ #ifdef BX_QEMU
+ /*
+  *  * ACPI 2.0 Generic Address Space definition.
+@@ -1452,7 +1503,7 @@ struct acpi_20_hpet {
+
+ struct madt_io_apic
+ {
+-	APIC_HEADER_DEF
++	ACPI_SUB_HEADER_DEF
+ 	uint8_t                              io_apic_id;             /* I/O APIC ID */
+ 	uint8_t                              reserved;               /* Reserved - must be zero */
+ 	uint32_t                             address;                /* APIC physical address */
+@@ -1463,7 +1514,7 @@ struct madt_io_apic
+ #ifdef BX_QEMU
+ struct madt_int_override
+ {
+-	APIC_HEADER_DEF
++	ACPI_SUB_HEADER_DEF
+ 	uint8_t                bus;     /* Identifies ISA Bus */
+ 	uint8_t                source;  /* Bus-relative interrupt source */
+ 	uint32_t               gsi;     /* GSI that source will signal */
+@@ -1567,6 +1618,21 @@ int acpi_build_processor_ssdt(uint8_t *ssdt)
+     return ssdt_ptr - ssdt;
+ }
+
++static void acpi_build_srat_memory(struct srat_memory_affinity *numamem,
++    uint64_t base, uint64_t len, int node, int enabled)
++{
++     numamem->type = SRAT_MEMORY;
++     numamem->length = sizeof(*numamem);
++     memset (numamem->proximity, 0 ,4);
++     numamem->proximity[0] = node;
++     numamem->flags = cpu_to_le32(!!enabled);
++     numamem->base_addr_low = base & 0xFFFFFFFF;
++     numamem->base_addr_high = base >> 32;
++     numamem->length_low = len & 0xFFFFFFFF;
++     numamem->length_high = len >> 32;
++     return;
++}
++
+ /* base_addr must be a multiple of 4KB */
+ void acpi_bios_init(void)
+ {
+@@ -1577,12 +1643,15 @@ void acpi_bios_init(void)
+     struct multiple_apic_table *madt;
+     uint8_t *dsdt, *ssdt;
+ #ifdef BX_QEMU
++    struct system_resource_affinity_table *srat;
+     struct acpi_20_hpet *hpet;
+     uint32_t hpet_addr;
+ #endif
+     uint32_t base_addr, rsdt_addr, fadt_addr, addr, facs_addr, dsdt_addr, ssdt_addr;
+     uint32_t acpi_tables_size, madt_addr, madt_size, rsdt_size;
++    uint32_t srat_addr,srat_size;
+     uint16_t i, external_tables;
++    int nb_numa_nodes;
+
+     /* reserve memory space for tables */
+ #ifdef BX_USE_EBDA_TABLES
+@@ -1624,6 +1693,25 @@ void acpi_bios_init(void)
+     ssdt_addr = addr;
+     ssdt = (void *)(addr);
+     addr += acpi_build_processor_ssdt(ssdt);
++#ifdef BX_QEMU
++    qemu_cfg_select(QEMU_CFG_NUMA);
++    nb_numa_nodes = qemu_cfg_get64();
++#else
++    nb_numa_nodes = 0;
++#endif
++    if (nb_numa_nodes > 0) {
++        addr = (addr + 7) & ~7;
++        srat_addr = addr;
++        srat_size = sizeof(*srat) +
++            sizeof(struct srat_processor_affinity) * smp_cpus +
++            sizeof(struct srat_memory_affinity) * (nb_numa_nodes + 2);
++        srat = (void *)(addr);
++        addr += srat_size;
++    } else {
++        srat_addr = addr;
++        srat = (void*)(addr);
++        srat_size = 0;
++    }
+
+     addr = (addr + 7) & ~7;
+     madt_addr = addr;
+@@ -1733,6 +1821,69 @@ void acpi_bios_init(void)
+
+     memset(rsdt, 0, rsdt_size);
+ #ifdef BX_QEMU
++    /* SRAT */
++    if (nb_numa_nodes > 0) {
++        struct srat_processor_affinity *core;
++        struct srat_memory_affinity *numamem;
++        int slots;
++        uint64_t mem_len, mem_base, next_base = 0, curnode;
++
++        qemu_cfg_select(QEMU_CFG_NUMA);
++        qemu_cfg_get64();
++        memset (srat, 0 , srat_size);
++        srat->reserved1=1;
++ 
++        core = (void*)(srat + 1);
++        for (i = 0; i < smp_cpus; ++i) {
++             core->type = SRAT_PROCESSOR;
++             core->length = sizeof(*core);
++             core->local_apic_id = i;
++             curnode = qemu_cfg_get64();
++             core->proximity_lo = curnode;
++             memset (core->proximity_hi, 0, 3);
++             core->local_sapic_eid = 0;
++             if (i < smp_cpus)
++                 core->flags = cpu_to_le32(1);
++             else
++                 core->flags = 0;
++             core++;
++        }
++
++        /* the memory map is a bit tricky, it contains at least one hole
++         * from 640k-1M and possibly another one from 3.5G-4G.
++         */
++        numamem = (void*)core; slots = 0;
++        acpi_build_srat_memory(numamem, 0, 640*1024, 0, 1);
++        next_base = 1024 * 1024; numamem++;slots++;
++        for (i = 1; i < nb_numa_nodes + 1; ++i) {
++            mem_base = next_base;
++            mem_len = qemu_cfg_get64();
++            if (i == 1) mem_len -= 1024 * 1024;
++            next_base = mem_base + mem_len;
++ 
++            /* Cut out the PCI hole */
++            if (mem_base <= ram_size && next_base > ram_size) {
++                mem_len -= next_base - ram_size;
++                if (mem_len > 0) {
++                    acpi_build_srat_memory(numamem, mem_base, mem_len, i-1, 1);
++                    numamem++; slots++;
++                }
++                mem_base = 1ULL << 32;
++                mem_len = next_base - ram_size;
++                next_base += (1ULL << 32) - ram_size;
++            }
++            acpi_build_srat_memory(numamem, mem_base, mem_len, i-1, 1);
++            numamem++; slots++;
++        }
++        for (; slots < nb_numa_nodes + 2; slots++) {
++            acpi_build_srat_memory(numamem, 0, 0, 0, 0);
++            numamem++;
++        }
++
++         acpi_build_table_header((struct acpi_table_header *)srat,
++                                "SRAT", srat_size, 1);
++    }
++
+     /* HPET */
+     memset(hpet, 0, sizeof(*hpet));
+     /* Note timer_block_id value must be kept in sync with value advertised by
+@@ -1761,9 +1912,11 @@ void acpi_bios_init(void)
+     rsdt->table_offset_entry[2] = cpu_to_le32(ssdt_addr);
+ #ifdef BX_QEMU
+     rsdt->table_offset_entry[3] = cpu_to_le32(hpet_addr);
++    if (nb_numa_nodes > 0)
++        rsdt->table_offset_entry[4] = cpu_to_le32(srat_addr);
+ #endif
+-    acpi_build_table_header((struct acpi_table_header *)rsdt,
+-                            "RSDT", rsdt_size, 1);
++    acpi_build_table_header((struct acpi_table_header *)rsdt, "RSDT",
++        rsdt_size - (nb_numa_nodes > 0? 0: sizeof(uint32_t)), 1);
+
+     acpi_tables_size = addr - base_addr;
+
+-- 
+1.6.1.3
+
+
diff --git a/pc-bios/bios-pq/series b/pc-bios/bios-pq/series
index 6011467e6c..fdef1793bc 100644
--- a/pc-bios/bios-pq/series
+++ b/pc-bios/bios-pq/series
@@ -11,3 +11,4 @@
 0011_read-additional-acpi-tables-from-a-vm.patch
 0012-load-smbios-entries-and-files-from-qemu.patch
 0013_fix-non-acpi-timer-interrupt-routing.patch
+0014_add-srat-acpi-table-support.patch